Hi
if done everything like in this post:
http://forum.xda-developers.com/showthread.php?t=1650615
The installation was ok, but if i reboot i can't find the play store or i can't create a google account. I have refrash the gapps and i reinstall CM9 but i can't create any google account.
My device is a samsung galaxy s +.
I hope you can help me. THX!!!
Re download the gapps. Wipe data, cache, dalvik. Flash cm9 then gapps. Reboot phone.
I think it's because you are flash the gapps before cm9. Flash cm9 first.
Hit the thanks button
Sent from my GT-I9001 using xda premium
important steps
germansniper said:
Hi
if done everything like in this post:
http://forum.xda-developers.com/showthread.php?t=1650615
The installation was ok, but if i reboot i can't find the play store or i can't create a google account. I have refrash the gapps and i reinstall CM9 but i can't create any google account.
My device is a samsung galaxy s +.
I hope you can help me. THX!!!
Click to expand...
Click to collapse
after flashing the rom and he is on, turn off your device.
go to cwm--wipe cach--wipe dlvaik and install the right gapps for your device
I generally do it this way:
MAKE A NANDROID
Backup Apps+Data using e.g.Titanium Backup
create Titanium Backup update.zip
wipe data/factory reset in recovery
flash ROM
flash Gapps
flash Titanium Backup update.zip
reboot
skip inital setup
batch restore Apps+Data
reboot
configure google account
Hallo,
i have a problem with updating cm 10.1 to 10.2 on my i9000. Like i say, i had allready cm 10.1 and prior to that 10.0 and helly bean. Till now everything was fine and every update was OK. I have allready root rights.
Now i tried to flash cm 10.2 like that;
1.
wipe data/factory reset
wipe cache partition
wipe dalvic cache
- flash cm-10.2-20130824-NIGHTLY-galaxysmtd.zip - 2 times
- flash gapps 10.2.x 20130813
- reboot system now
After reboot, i'm in the welcome modus - i choose German - then start - then i can choose the connection WLAN or skip with data. In this part i get allready an error massage "com.google.android.gsf.login" and "unfurnatly google account manager was shut down". After that i'm back again in the choose-connection area. After chosing WLAN or skip and use data, i always get the above mentioned message.
Restore 10.1 again
2.
like above, but extra mounts and storage - format /system
- Result like 1
3.
Just update from 10.1 to 10.2 with CWM, without wipe data/factory reset - wipe cache partition - wipe dalvic cache.
- Result 4.3 is on my mobile, but there ist still the error massage from above.
4.
like 3, but i deleted the Google account in 10.1. Just uodated to 10.2 without wiping.
- Result -> no error massages, but i can't add google account. I clik on add account - google -> but nothing happen.
I don't know what to do. Do somebody have any idea? Where is my oult?
one-dimon said:
wipe data/factory reset
wipe cache partition
wipe dalvic cache
- flash cm-10.2-20130824-NIGHTLY-galaxysmtd.zip - 2 times
- flash gapps 10.2.x 20130813
- reboot system now
Where is my foult?
Click to expand...
Click to collapse
Your foult is that you didn't read pawitp's opening post carefully. All steps untill gapps were fine, then after gapps you should have remained in CWM recovery and go to advanced restore and restore your /data from last nandroid backup from cm10.1, it works perfectly well.
I would advice you not to install 20130824 build anymore as it has some serious bugs (I run it in my i9000 and it works perfectly fine but some people had total re-formatting ofntheninternal SD card and data lost) but wait now for just short, any moment nightly 20130827 will be uploaded. The bugs are fixed there.
Then you can repeat proceeding once again as above and accomplish with /data restore. Then it should work fine again
Ok, i try it
Last question before i try, i have to restore just /data, wich backup do i have to do, full backup or just /data?
Thanx a lot
one-dimon said:
Last question before i try, i have to restore just /data, wich backup do i have to do, full backup or just /data?
Click to expand...
Click to collapse
OK, now the new nightly build is there, CM10.2 20130827
Do all your steps as above (download zip, go to recovery mode, wipe data/factory reset, wipe cache, wipe dalvik cache under "advanced", install 20130827 zip, stop here) now new:
if your last installed build is 10.2 you have already installed gapps for CM10.2 so you can skip re-installing them again
now go to "advanced restore" and choose your last nandroid backup of the CM10.1, where your google account was still working fine
choose now from your last nandroid file the option: "restore /data"
after restore is finished go back to main menu and reboot the system
Unless if you have formatted your SD card meanwhile, all your data will be back like they were in the CM10.1 (also your google account) and your new CM10.2 will work fine.
For thanking, it is common in this forum to click on "thanks" button left beyond all the posts which you find to be helpful
Hy, i tried what you said. I restored 10.1 before it
*
wipe data / factory reset - wipe cache - advanced .. wipe dalvic cache*- install 10.2
then - flash gapps for 10.2
then - restore just data
reboot system
*
4.3 is on my mobile, google account seems to be OK. But then i recognized, that my Contacts, Keep, Google+ and some other points doesn't synchronize. I've tried flash gapps again, then restore data -> error massage "google account closed"
*
My next step was to do above mentioned again - same error massage
*
So, i do it again. After wipe data / factory reset - wipe cache a.s.o. i had a look in my storage/sdcard0. It was full of old data, so i extra formated /system and formated /storage/sdcard0. After that i flashed 10.2 and gapps again and restored data. I receive the same sh.. error again and google account doesn't work.
*
Now i restored 10.1 again completely
*
Any idea?
one-dimon said:
....Now i restored 10.1 again completely....
Click to expand...
Click to collapse
Did you enable contacts sync in your accounts? Other thing you can do is to export all your contacts (in "people" ) as vfc data and after the upgrade import it from your SD card. I did that as I don't like google sync functions (for having few accounts) so I only enabled sync for the apps.
Other great thing is to use free app "SMS backup&restore" and "Call logs backup&restore" (by the same developer) from play store. The apps work for any android version and backup data is compatible to restore as well
Try to post in the development thread of nightly cm10.2 for i9000 or read through, I think also somebody else reported problems with google account, maybe it is solved why it happened.
BTW: for next flashing don't use nightly 20130827 anymore as the new 20130828 is out and it has many bug fixes
______________________________________
Sent from GT-P5110 powered by CM 10.2
Hy, i'm again. I try it with the newest cm, with the same result. I flashed exactly like the developer said. No error message, but play store, contacts and some other things don't work.
I would like to post in the development Center, but I am a to young forum member.
Maybe you could post for me my problem or the link to this posts?
one-dimon said:
Hy, i'm again. I try it with the newest cm, with the same result. I flashed exactly like the developer said. No error message, but play store, contacts and some other things don't work.
I would like to post in the development Center, but I am a to young forum member.
Maybe you could post for me my problem or the link to this posts?
Click to expand...
Click to collapse
Just one question: did you flash the gapps for 4.3 as well? Developer pawitp is a genious person and he doesn't mention it anymore in his first posts (he thinks that everybody knows it.....)
If you didn't, you can do it later as well, just download them and install zip in recovery mode..... Sorry if it doesn't work. Then would be better to wait untilmstable version is released. CM 10.2 works in my i9000 amazing, but another people report bugs.
Of course, i flashed gapps for 4.3. Some user posted in developement thread, that they solved the problem with the google account with Titanium Backup. They restored data with TB. Do you know what i have to backup / restore: user apps & data & system data?
*
Could you*post a question fpr me in the developement thread if this problem is known to the developers and if they have a resolution? Maybe they are allready working on it and solve the problem in next nightlys?
one-dimon said:
Of course, i flashed gapps for 4.3. Some user posted in developement thread, that they solved the problem with the google account with Titanium Backup. They restored data with TB. Do you know what i have to backup / restore: user apps & data & system data?
Click to expand...
Click to collapse
No, mate, if you meant CWM recovery. I would also use Titanium backup app for that, there can't go so wrong.
Could you*post a question fpr me in the developement thread if this problem is known to the developers and if they have a resolution? Maybe they are allready working on it and solve the problem in next nightlys?
Click to expand...
Click to collapse
you have no idea how little free time I have. But you're already on 5 posts, just five more and you will be able to post the questions in development threads. It is anyway better that you describe what the problem is. I think I saw in CM10.2 thread yesterday that the developer pawitp works on that.
EDIT: BTW, restoring /data from nandroid backup made with CM10.1x under CWM recovery -->advanced restore is possible without problems. But I think we have mentioned that already in last posts...
OK, I can understand you.
What do I have to do first: flash gapps or restore /data?
have you checked that dataprotection for these apps is not enabled?
one-dimon said:
OK, I can understand you.
What do I have to do first: flash gapps or restore /data?
Click to expand...
Click to collapse
I've posted your question and left link to this thread in the CM10.2 development topic. Hope somebody will answer soon.
If your Google account worked well in CM10.1x, I would say you should try this way:
download the newest CM10.2 nightly zip (20130830) directly here: http://get.cm/get/amd
download Google Apps zip for Android 4.3
run CWM recovery mode
try option "install zip" and don't install yet, just check if your zip files are visible for the CWM recovery in the folder where you saved them
return to main menu and wipe data/factory reset
wipe cache
wipe dalvik cache under "advanced"
install zip CM10.2 nightly
install GApps for 4.3
go to "advanced restore" and choose your last nandroid backup file made by CM10.1 build where your Google account worked well
now choose (from that nandroid backup file) the option "restore /data"
after your data are restored, go back to the main menu and reboot the system
Let me know if it worked. Please quote at least little bit of my text (click "reply" beyond my post) so I will get the notification that you've quoted me, otherwise I don't see when you answer
p.s. good point by @Marvi70 just one post before (this one) mine
Marvi70 said:
have you checked that dataprotection for these apps is not enabled?
Click to expand...
Click to collapse
What do you mean? How can I check it?
one-dimon said:
What do you mean? How can I check it?
Click to expand...
Click to collapse
in settings -> apps, in the app property of those apps check if dataprotection is enabled (no access to private data). When yes disable it.
Marvi70 said:
Datatings -> apps, in the app property of those apps check if dataprotection is enabled (no access to private data). When yes disable it.
Click to expand...
Click to collapse
OK, I checked all apps, also system apps. Data protection is disabled everywhere.
tetakpatak said:
I've posted your question and left link to this thread in the CM10.2 development topic. Hope somebody will answer soon.
If your Google account worked well in CM10.1x, I would say you should try this way:
download the newest CM10.2 nightly zip (20130830) directly here: http://get.cm/get/amd
download Google Apps zip for Android 4.3
run CWM recovery mode
try option "install zip" and don't install yet, just check if your zip files are visible for the CWM recovery in the folder where you saved them
return to main menu and wipe data/factory reset
wipe cache
wipe dalvik cache under "advanced"
install zip CM10.2 nightly
install GApps for 4.3
go to "advanced restore" and choose your last nandroid backup file made by CM10.1 build where your Google account worked well
now choose (from that nandroid backup file) the option "restore /data"
after your data are restored, go back to the main menu and reboot the system
Let me know if it worked. Please quote at least little bit of my text (click "reply" beyond my post) so I will get the notification that you've quoted me, otherwise I don't see when you answer
p.s. good point by @Marvi70 just one post before (this one) mine
Click to expand...
Click to collapse
Hy, i'm again. I've just tested to flash another ROM. It was slimbean. Everything works fine, there are no problems with gapps. I thing there is a bug in cm 10.2.
one-dimon said:
Hy, i'm again. I've just tested to flash another ROM. It was slimbean. Everything works fine, there are no problems with gapps. I thing there is a bug in cm 10.2.
Click to expand...
Click to collapse
Good to know, thanks for info! Congratulations also CM10.2 will soon be cool, the devs are now fixing the bugs on daily basis
tetakpatak said:
Good to know, thanks for info! Congratulations also CM10.2 will soon be cool, the devs are now fixing the bugs on daily basis
Click to expand...
Click to collapse
I hope so, i allready use cm a long time and i was a happy user till 10.1. I think if my prob. will be fixed, i'll switch to cm again
one-dimon said:
Of course, i flashed gapps for 4.3. Some user posted in developement thread, that they solved the problem with the google account with Titanium Backup. They restored data with TB. Do you know what i have to backup / restore: user apps & data & system data?
Click to expand...
Click to collapse
BTW, after your post about Titanium Backup I've tried indeed to restore data only from my old backup of Angry Birds app, it went perfectly well
Backup file was done with rooted Froyo 2.2 and restored in CyanogenMod 10.2
Before importing the data saved in different ROM, I used the settings exactly like described on the website of Titanium. I've checked again CM development posts about Titanium backup and they talk indeed about the one shouldn't restore whole apps.... but data only seems not to be a problem!
Big thanks, mate!
HI guys, this is my first time using android phone. I wanna ask how do I upgrade and install ( http://forum.xda-developers.com/showthread.php?t=2526090 ) to my current note 1.
My current note 1 info:
Model : GT-N7000
Version: 2.3.6
Baseband : N7000DXLC1
Kernel : 2.6.35.7-N7000DXLC2-CL1039404
[email protected] #2
Build : GINGERBREAD.DXLC2
Thanks in advance! Have a great day. Cheers!
All written in first post of this thread...
User_99 said:
All written in first post of this thread...
Click to expand...
Click to collapse
I fail to find it.. Would you mind if you could send the link here? thanks a ton !
Really???
From first page...
HOW TO INSTALL
First time installing CyanogenMod 11.0 to your Galaxy Note N7000:
Read known issues ans FAQs
Make sure you're running a proper working ClockworkMod-Recovery/TWRP = correct kernel like RAW4 (kernel & recovery is ONE part!!!)
Copy Gapps and CM11.0 ZIPs to your Internal/External SDcard
Boot into Recovery
Wipe data/factory reset
Wipe Cache and Dalvik Cache
Format System
Flash CM11.0 zip
Flash GApps zip from SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
User_99 said:
Really???
From first page...
HOW TO INSTALL
First time installing CyanogenMod 11.0 to your Galaxy Note N7000:
Read known issues ans FAQs
Make sure you're running a proper working ClockworkMod-Recovery/TWRP = correct kernel like RAW4 (kernel & recovery is ONE part!!!)
Copy Gapps and CM11.0 ZIPs to your Internal/External SDcard
Boot into Recovery
Wipe data/factory reset
Wipe Cache and Dalvik Cache
Format System
Flash CM11.0 zip
Flash GApps zip from SDCard
Reboot
Don't restore system data using Titanium Backup!
Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Click to expand...
Click to collapse
I know that.. but problem is I dont know where to find a proper working CLockworkmod-Recovery for it..
Really so difficult to use the forum serach?
Raw4 dl here http://forum.xda-developers.com/showthread.php?t=2397000
This is not ROM but CWM/TWRP file that will fully deodex stock ROM.
You don't need it if you a not gong to mod your firmware.
First time will take long time.
Installation:
Flash by CWM/TWRP.
Optionally clear cache & dalvik/art cache.
Wipe data/factory reset not needed.
https://drive.google.com/file/d/0B-CE1vlk7OYkODdKWTBUU0FyWXc/view?usp=sharing
Information for ALL 5.0.1 TW users. Affected unmodified stock ROM
After factory reset it hardly possible to pass startup wizard because of Google Play Services force closes.
Also it not possible to use Play store for updating because it need google account, but it's setup crashing.
It fixed by this package.
I9295XXUDOC3 - https://drive.google.com/file/d/0B-CE1vlk7OYkTUx6WXNuc1FvMEE
Minor bug fix for deodex I9295XXUDOC3 https://my.pcloud.com/publink/show?code=XZ50TXZy9AgWzByAe7l5nIPgqORfFlMf1fV
If you've downloaded deodexer after 9-may-15 you need not this.
I9295XXUDOD3 - https://drive.google.com/open?id=0B-CE1vlk7OYkZkZqZkVzcWZXRmM&authuser=0
I9295XXUDOE8 - https://drive.google.com/file/d/0B-CE1vlk7OYkSFFjcU45aU9iRnc/edit
This guide requires that you are already on custom Recovery and your phone firmware is RUI 1.0
First things first - Backup! Take all Kinds of backups, this is very critical when you are upgrading to newer Android OS.
For optimal performance in Android 11, I will recommend downloading apps from playstore if you can handle the stress of starting all over again with some apps.
PROCEDURES:
1) Take backup. You can use Migrate, Titanium or Swift, whichever one that works for you. Also remember to copy some downloaded files to SDcard or PC.
2) Reboot into TWRP recovery and wipe:
Dalvik Cache
Cache
System
Data
DO NOT WIPE VENDOR PARTITION
3) Flash Rom, Flash Gapps. In our case, Nezuko Custom Rom already contains Google Apps so no need to flash gapps.
4) Go to Wipe, Advanced Wipe and select Format data. It will give you option to type in yes to be sure that you know exactly what you are doing.
NB: formatting data will wipe everything in your internal storage so, make sire to take a backup before that.
5) Reboot. If the Phone gives you a warning that no OS is installed, just ignore it once you are sure that the Rom and Gapps flashed without errors.
Enjoy Android 11.
Thanks for sharing
Thank you for this walk through for custom rom.
Can you also please make a guide on to upgrade from stock rooted realme UI(android 10) to realme UI2 successfully.
Whenever I try to upgrade, it says that the zip is made for rmx1992L1 and fails with a red warning in twrp.
Since realme UI 2 has been official pushed for X2 as stable build this guide would be a good guidance for us new users.