Database Develop

[Q] xt1056 Sprint, wont connect to network please help

while attempting root on my sprint moto x using the moto x tool kit I decided hey the verizon root might work since theyre both cdma. bad idea. now every time i turn on my phone. com.android.phone force closes and it tells me sim card error. ive already flashed the stock image and I still get the error. any help would be greatly appreciated. thank you.

I attempted the slapmymoto method in the motoxtool kit and selected verizon

bradsinram said:
I attempted the slapmymoto method in the motoxtool kit and selected verizon
Click to expand...
Click to collapse
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root

dray_jr said:
not sure what you did at all because all the phones are rooted the same way.
i would download the 4.2.2 firmware here
http://sbf.droid-developers.org/download.php?device=0&file=18
then go to this guide
http://forum.xda-developers.com/showthread.php?t=2603358
and follow the guide for returning to stock.
then after you are stock decide if you want to unlock your bootloader or not. then pick the guide based on what you decide and follow it for root
Click to expand...
Click to collapse
I've my device is 4.4 and ive already returned to stock and am still having the issue?

bradsinram said:
I've my device is 4.4 and ive already returned to stock and am still having the issue?
Click to expand...
Click to collapse
ok but if you did it threw the toolkit you might of still returned to the stock firmware for a different device

i restored completely to stock and am still having the same issue. please help

bradsinram said:
i restored completely to stock and am still having the same issue. please help
Click to expand...
Click to collapse
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in

dray_jr said:
im going to bump this in hopes someone else takes a look.
can you look under settings/About phone/Status
what dose it way for
Network
signal strength
Mobile netowork type
also do you have a valid imei/meid please dont post this number here just check the number there with the number on the side of the box the phone came in
Click to expand...
Click to collapse
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.

bradsinram said:
it says sprint for network then com.android.phone force closes. then it switches to searching for service. it say no signal strength and mobile network type is unknown. but it seriosuly force closes ever 2 seconds.
Click to expand...
Click to collapse
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.

dray_jr said:
if it keeps force closing then you are not returning the phone to stock. because if you did that would not happen.
so i need you to explain to me what you are using when returning your phone to stock because it is not taking for some reason.
Click to expand...
Click to collapse
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash

bradsinram said:
im using the 4.4 file that the motox toolkit downloads then i extract it to my adb folder and run these commands
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
everything appears to sucessfully flash
Click to expand...
Click to collapse
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734

dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
okay I will do. so i just find it weird they have an almost identical name and both say sprint. but thank you and im download the one you provided now.

dray_jr said:
so what your now telling me 3-4 post later is that you did not listen to me at all so you asked for help and when i gave you the correct answer on what to do you did not listen.
so i will try this one more time the 4.4 firmware package you keep using from the Moto x toolkit is not the Sprint firmware so STOP using it and download the firmware from the link below. and flash it with the above commands like i told you to do in my first post
http://sbf.droid-developers.org/download.php?device=0&file=734
Click to expand...
Click to collapse
so ive used the file you provided me with and am still having the same exact issues. I appreciate your help.

I feel like i need to rewrite the radio partition but which I'm assumung is the NON-HLOS but every time i try to write to it i get permission denied

ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.

dray_jr said:
ok sorry i left out a command i think i know what is going on
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase userdata
fastboot erase cache
fastboot reboot
i know you just did this but do it one more time and make sure you do the erase userdata and cache commands and then reboot.
after wiping everything i am not sure what would be wrong i have a sprint device and i have never had this issue.
Click to expand...
Click to collapse
yeah I've tried it about ten times now and i think theres something else from the verizon root that mustve gotten flashed and is causing this

Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.

Steve-x said:
Well you have to flash the NON-HLOS.bin or it is not going to work.
Why not just download the full Sprint firmware file(I believe you've already done this) download rsdlite, remove the var line from the xml, and with one click your phone will work fine again.
Click to expand...
Click to collapse
Thank you so much! I was wondering what kept causing rsd lite to fail. Im lead technician at a spring store and could just AE it but really dont want a refurb, especially since this phone is two days old

sorry but how do I remove the var line?

ive got it figured out thank you for your help

Moto X TMO Dev Edition Freezing

Hi,
I just got my Moto X Dev Edition GSM TMO last week, but I got it very unstable, while I had try to wipe cache and factory reset few times.
Some problem that I have
Numeric Keypad is not shown while using google keyboard. The problem that my email is using 2FA from google to entry my 6-digit PIN
Chrome freeze while open quite complex pages
Gmail freezing while open communication more than 3 email on the messaging mode
Path also unstable while need to scroll down and request to reload more data.
Whatsapp stuck when there's few message has beeen received
Thinking to downgrade the os to 4.4, but when I read in some thread inform better not to downgrade that might cause device brick.
Is there any other solution so I can use my Moto X for daily, while waiting for T-Mobile latest 4.4.2 rom.
Please share
Thank you

If you have to downgrade to 4.4, but you're waiting for T-Mobile 4.4.2, what ROM are you running?
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!

SymbioticGenius said:
If you have to downgrade to 4.4, but you're waiting for T-Mobile 4.4.2, what ROM are you running?
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!
Click to expand...
Click to collapse
Currently I'm using T-Mobile 4.4.2 OTA
Is it possible to restore to factory image with T-Mobile 4. 4?

tyapeter said:
Currently I'm using T-Mobile 4.4.2 OTA
Is it possible to restore to factory image with T-Mobile 4. 4?
Click to expand...
Click to collapse
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.

eksasol said:
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.
Click to expand...
Click to collapse
Eksasol,
What did you mean with don't flash with those files? Is that means unzip the image files and take out those files and zip again?
Which images is the best one for downgrade, from the sbf Blur_Version.161.44.25.ghost_row.Retail.en.US.zip or TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_1FF.xml.zip
And also what you mean with "This doesn't means that you won't brick with other version"? Is that mean that not guarantee that downgrade won't have brick on the devices?
Please advice thanks

Let me make it easier. Just flash the system and kernel files leave everything else alone. However the ability to go back depends on how you got to 4.4.2 to begin with, OP said he took the OTA, not sure about you.
My advice assuming you're stock is to call Motorola, tell them you took the ota and these are the issues you're having. Get them to send you a new phone. I'd rather see you do that than brick your phone trying to do it yourself.
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!

eksasol said:
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.
Click to expand...
Click to collapse
Are you sure this is correct? I was told in this thread: http://forum.xda-developers.com/showthread.php?p=50330230#post50330230 (see post #12):
let me make this blunt before you even get your phone
your phone is a DE so you can root any version
is you come with 4.2.2 camera update or 4.4 you can upgrade and downgrade between thouse two versions only
if your phone comes with 4.4.2 you can not downgrade at all so just root it and enjoy because most people are trying to get there and bricking there phones half the time.
Click to expand...
Click to collapse
So the way I understand it one cannot downgrade from 4.4.2 to any other version because bootloader in 4.4.2 was changed and is not compatible with any previous release.

tyapeter said:
Eksasol,
What did you mean with don't flash with those files? Is that means unzip the image files and take out those files and zip again?
Which images is the best one for downgrade, from the sbf Blur_Version.161.44.25.ghost_row.Retail.en.US.zip or TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_1FF.xml.zip
And also what you mean with "This doesn't means that you won't brick with other version"? Is that mean that not guarantee that downgrade won't have brick on the devices?
Please advice thanks
Click to expand...
Click to collapse
If you haven't already unlock the bootloader, then you should just send the phone back. Once you unlock the bootloader the warranty is voided and you'll be stuck with that phone. If you still intend on flashing:
You flash them using mfastboot while in flash mode, do not flash motoboot or gpt, also don't run "fastboot getvar". Manually perform these commands:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase customize
mfastboot erase clogo
After flashing T-Mo 4.4, you can receive OTA update to get back to 4.4.2.
As for downgrading to other versions, read this sticky before flashing anything: http://forum.xda-developers.com/showthread.php?t=2635366

eksasol said:
If you haven't already unlock the bootloader, then you should just send the phone back. Once you unlock the bootloader the warranty is voided and you'll be stuck with that phone. If you still intend on flashing:
You flash them using mfastboot while in flash mode, do not flash motoboot or gpt, also don't run "fastboot getvar". Manually perform these commands:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase customize
mfastboot erase clogo
After flashing T-Mo 4.4, you can receive OTA update to get back to 4.4.2.
As for downgrading to other versions, read this sticky before flashing anything: http://forum.xda-developers.com/showthread.php?t=2635366
Click to expand...
Click to collapse
Thanks a lot, it works

[Q] Moto X probabbly hard bricked

Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA

TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
try to flash with mfastboot the recovery from 4.4.2 the FIRMWARE U HAVE IT FIRST
MUST BE THE SAME VERSION THAT U HAVE FIRST THAT UR PHONE BRICKED
after u flash the recovery,reboot bootloader and try to flash all firmware

TUESONER said:
Hello anyone! I'm looking for some help.
My phone was running android 4.4.2, then i modified the buil.prop for increasing the display density & my phone got off, then i tried and tried and tried turn it on, then i did it & i fash my stock rom (for XT1058 america movil MX) the OTA told me about the update & i accept it... Well my phone now is in fastboot & he says this (yep ''he'' LOL):
downgraded security version
update gpt_maim¡n version failed
Failed to check for gpt_backup: 0x35
CID Read failure
Invalid CID status 0x69
Customer ID eroor. Contact dealer: 0xdead
No SP partition found
Fastboot reason: Invalid CID
Well, i wish someone could help me, i don't want to have a beautiful $400 paperweight, thanks a lot XDA
Click to expand...
Click to collapse
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> http://sbf.droid-developers.org/phone.php?device=0 ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)

KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As TUESONER said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?

TUESONER said:
I got my phone with 4.2.2 out of the box, then i recivied the 4.4.2 via OTA, at&t us have the XT1058, would i install the rom on 4.4 fot at&t then flash the modem?
Click to expand...
Click to collapse
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?

KidJoe said:
No. If you received 4.4.2 OTA... you need to flash 4.4.2. do NOT flash 4.4.
Due to changes in 4.4.2, you either will brick, or set yourself up to brick if you try to downgrade your rom version... i.e. 4.4.2 -> 4.4 will brick or set you up for it.
Were you running an ATT ROM on your phone? or something else?
Click to expand...
Click to collapse
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?

TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
I don't know the differences in the ATT Rom vs America Movil... I know the ATT rom has a lot of bloat.
I don't think the ATT 4.4.2 SBF was leaked yet (it wasn't when i looked earlier)...

TUESONER said:
I'm wrong, i wanted to write 4.4.2. I was running my stock rom, america movil 4.2.2, recivied the OTA for 4.4.2, in the page of firmwares i can´t find the firmware for america movil 4.4.2, probabbly it doesn´t exist, so, can i flash the rom for the at&t XT1058, then i got the modem for my carrier flashed?
Click to expand...
Click to collapse
the only Movil 4.4.2 is this
http://sbf.droid-developers.org/download.php?device=0&file=835
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know

KidJoe said:
You had 4.4.2 on your phone, I'm betting the "stock rom" you had then tried flashing was 4.4 or lower.
As danger2u said, the first thing you'll want to try is to flash the ROM for your phone. Since you had 4.4.2 on there, you'll need to find the 4.4.2 SBF for your carrier (I don't see american movil mx listed on -> TUESONER ), and flash it.
If that doesn't work, you'll want to see this thread -> http://forum.xda-developers.com/moto-x/general/tut-resurrecting-bricked-moto-x-corrupt-t2629057 It too requires you have the correct ROM for your device
If you manage to get it working.. DO NOT DOWNGRADE YOUR ROM!!!!! (i.e. once on 4.4.2 do NOT flash 4.4 or below!!!!)
Click to expand...
Click to collapse
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....

Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.

TUESONER said:
Thanks anyone for the suport, tomorrow imma try with that rom, i'm reall tired today, was a lng day at my work, i will post the results, again, thanks everyone, wait for my post tomorow.
Click to expand...
Click to collapse
kj2112 said:
This ^^
If you downgraded and then took an ota, that usually leads to a brick. Read the thread kid Joe posted and hopefully you can recover.
Good luck!
Oh, and as said....the best moto x advice there is, is once on 4.4.2.....stay on 4.4.2. Unfortunately.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
danger2u said:
the only Movil 4.4.2 is this
xxx
so i think u have this version of firmware on 4.2.2
download it
extract firmware
flash only the recovery
reboot bootloader
then flash entire rom
let us know
Click to expand...
Click to collapse
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too

TUESONER said:
It did't work at all, i flashed the recovery then the entire rom, now thce cellphone turn on, then i see the message of the unlocked bootloader, then the screen goes black & for something like half second i see the image of andy (the android caracter) & the legend ''updating'' then another image for half second or less that says ''error''
The rom has flashed correctly, i can enter in fastboot mode too
Click to expand...
Click to collapse
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way

danger2u said:
flash it manually
try another firmware that is 4.4.2 and compatible with ur country and operator
now if turns on is no more bricked. u are on the good way
Click to expand...
Click to collapse
flash manually? that's with fastboot or mfastboot? what comands do i need to use?

TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear

danger2u said:
mfastboot
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot oem config carrier vzw
mfastboot oem fb_mode_clear
Click to expand...
Click to collapse
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
TUESONER said:
flash manually? that's with fastboot or mfastboot? what comands do i need to use?
Click to expand...
Click to collapse
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.

KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
he can pass the comand
mfastboot oem config carrier vzw
it works without this too

KidJoe said:
Careful.. That is an example for Verizon. It might not match the XML that is in whatever rom TUESONER is trying to flash on an XT1058.
---------- Post added at 05:25 PM ---------- Previous post was at 05:24 PM ----------
First off, which SBF are you trying to flash? is it 4.4.2 or 4.4?
Past or attach the XML which is inside the SBF you are using. We'll help you convert it to the correct series of mFastboot commands.
Click to expand...
Click to collapse
i will use this one, i erased the line of ''max download size''

TUESONER said:
i will use this one, i erased the line of ''max download size''
Click to expand...
Click to collapse
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip

KidJoe said:
Is that the exact 4.4.2 ROM that was on your phone originally? If not, there is a chance this still might not fix you...
Its extremely similar to what @danger2u has already posted.
(based on Moto's web site and the XML you posted) after unzipping the "CLARO-BR_GHOST..." SBF, you'd want to try the following commands from the folder where you unzipped the SFB after booting the phone to fastboot/bootloader mode....
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot erase customize
mfastboot erase clogo
mfastboot reboot
NOTE: by Mfastboot, I mean the Moto modified version of fastboot, not the one that comes with the standard Android SDK/Platform Tools. The moto modified Fastboot.exe can sometimes be found in a windows folder inside an SBF, or you can download from -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
Click to expand...
Click to collapse
The ROM isn't the original that was running my phone, i got 4.2.2 out of the box, now i will indtsll thst ROM because is 4.4.2 & i will not brick or have problems, the fastboot that you attached doesn't work with the comands ''mfastboot'' i use just ''fastboot''?

i did it!
GUYS! THANK YOU A LOT! i did it, mi moto X is alive, thanks @KidJoe, @danger2u & @kj2112, you helped me without even knowing me.
I used the comands that @KidJoe gave me, but using just ''fastboot'' everything is working fine, even the 4G connection.
Thanks, really, really thanks... Now i feel i'm a real XDA member & i wish my post help people.

Flashable Moto X Radio

I converted my AT&T Moto X (XT1058) to the developer edition (XT1053) and I would like to make sure I can get the radios for the AT&T Model to put back on the device. The XT1053 and XT1058 but the AT&T model has a few different frequencies available to take full advantage of the AT&T Network.
I could wait til I get open and download the file and manually flash the radio but was hoping someone has or is able to make flashable zip files that will flash the radio and wipe the radio cache as per the XML mfastboot batch file.
Currently running 4.4.3 (Stock)
and my baseband version is MSM8960PRO_BP_2323.038.123.00R

BrokenWall said:
I converted my AT&T Moto X (XT1058) to the developer edition (XT1053) and I would like to make sure I can get the radios for the AT&T Model to put back on the device. The XT1053 and XT1058 but the AT&T model has a few different frequencies available to take full advantage of the AT&T Network.
I could wait til I get open and download the file and manually flash the radio but was hoping someone has or is able to make flashable zip files that will flash the radio and wipe the radio cache as per the XML mfastboot batch file.
Currently running 4.4.3 (Stock)
and my baseband version is MSM8960PRO_BP_2323.038.123.00R
Click to expand...
Click to collapse
WARNING: Be very careful. Since you have flashed the XT1053 ROM (which is on 4.4.3), you can NEVER go back to the AT&T ROM until it is updated to 4.4.3 as well. If you do you would (in essence) be DOWNGRADING. This can result in a brick OR having mismatched gpt.bin and/or bootloader.
Here is what you should do: Download the entire 4.4.2 AT&T SBF file from here: http://sbf.droid-developers.org/phone.php?device=0
Extract the file, and find JUST the following files: fsg.mbn & NON-HLOS.bin
use fastboot to flash these files:
fastboot flash fsg fsg.mbn
fastboot flash modem NON-HLOS.bin
then erase your modemst partitions:
fastboot erase modemst1
fastboot erase modemst2
REBOOT!
Now you should have the XT1053 rom, with the AT&T radio.
Good Luck!
BE CAREFUL - you will probably not be able to accept OTAs because you will have mismatched files which probably won't pass the verification. This may not be accurate (you might be able to accept future OTAs anyways, but use caution, nonetheless).

samwathegreat said:
WARNING: Be very careful. Since you have flashed the XT1053 ROM (which is on 4.4.3), you can NEVER go back to the AT&T ROM until it is updated to 4.4.3 as well. If you do you would (in essence) be DOWNGRADING. This can result in a brick OR having mismatched gpt.bin and/or bootloader.
Here is what you should do: Download the entire 4.4.2 AT&T SBF file from here: http://sbf.droid-developers.org/phone.php?device=0
Extract the file, and find JUST the following files: fsg.mbn & NON-HLOS.bin
use fastboot to flash these files:
fastboot flash fsg fsg.mbn
fastboot flash modem NON-HLOS.bin
then erase your modemst partitions:
fastboot erase modemst1
fastboot erase modemst2
REBOOT!
Now you should have the XT1053 rom, with the AT&T radio.
Good Luck!
BE CAREFUL - you will probably not be able to accept OTAs because you will have mismatched files which probably won't pass the verification. This may not be accurate (you might be able to accept future OTAs anyways, but use caution, nonetheless).
Click to expand...
Click to collapse
Oh yeah I am not worried about the swap. I was going to apply my updates manually, I couldn't remember if I was running the XT1053 or XT1058 radios so I wanted to get both so I can swap them out. I was going to do the same process you stated when I got home, I was just asking to see if someone could make flashable zips so I can put them on my phone for testing. It would also allow me to flash the stock radio before taking an OTA and then flash back to the AT&T radio afterwards.

How do I flash an XT1068 as an XT1064?

Simple question:
I have a UK **DUAL* SIM Moto G 2nd gen, XT1068, and I wish to flash it to an XT1064, US *SINGLE* SIM Moto G. How do I do this? Do I merely flash the US retail 4.4.4 onto it? I know this process could be carried out on the older 1st gen, to convert an XT1033 to an XT1032 (single SIM) - maybe I am impatient, but I want to try...
If you could advise me how to do this, please do let me know. What I am NOT after, is people asking me "why do you want to do this?" or telling me "Do you know the risks of X, Y or Z?" - I am an experienced engineer who's been using many platforms since the 1980s, I use Linux daily since 2003, and I know what I am doing - I know there are risks (with everything in tech, basically) and dissuasion is not needed, thanks folks

I also wanted to know how to do it :/

Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem

abhi0502 said:
Flash kitkat image of us version then update to lollipop see it works but before take a backup of ur system and modem
Click to expand...
Click to collapse
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.

glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Click to expand...
Click to collapse
So, wait for the official release

glossywhite said:
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
I guess you'd have to keep these backup on your PC, just in case, then you would follow the steps to go stock but with xt1064 files, once you flash it all, you'd start the system and check for update, if there is none, you'd download the zip and flash it by adb sideload. The backup is just for safety. My guess, and some kind obvious, is that your Sim won't work, then you'd have to flash the modem in order to see if at least sim 1 works.
Sent from my XT1068 using XDA Free mobile app
Edit: Yesterday I flashed xt1063 zip but I wasn't getting any update but it did worked. My guess is xt1064 might work

glossywhite said:
Thank you. Okay, so would you mind continuing to explain why I'm backing up system and modem, what i do with them once backed up.... etc? You've given me only minimal information, and I'm not told why I'm doing this or what i do with them once backed up...
Please be as descriptive as you can please, as I'm not looking to brick my phone.
Many thanks indeed for the help, i appreciate it greatly.
Click to expand...
Click to collapse
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data

rodrigo07 said:
So, wait for the official release
Click to expand...
Click to collapse
Of?
Ah, you presume I am looking to install lollipop? I am looking to convert an XT1068 to an XT1064, I never mentioned lollipop.

abhi0502 said:
Firstly flash stock firmware images of us which is already present in development thread
Then update to lollipop manually using stock recovery which zip file already present here
If your phone boots then its ok contact me if you have any problems
If u want to go back to kitkat dual sim refere here
http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
There no need to backup as stock firmware with fastboot already present but do backup your data
Click to expand...
Click to collapse
Thank you for your help. I really value it, God bless you

But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?

laureano97 said:
But...if you flash 4.4.4 on a dual sim anda that stuff and you convert it into a XT1064, will the Lollipop ota arrive?
Click to expand...
Click to collapse
It doesn't matter - I've tried this twice tonight with fastboot errors, so I decided to err on the side of caution and restore stock UK XT1068 firmware, and wait... hehe

I could successfully convert XT1068 to XT1064 and installed Android Lollipop
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??

Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc

No luck
rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
Thank you for your reply....Tried just now still no signal...any other way?? i guess i need the kernel image to be flashed where can i get that..??

rodrigo07 said:
try flashing this from your original firmware
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
do it at your own risk ofc
Click to expand...
Click to collapse
hello rodrigo07 i got the same error and tried the same procedure you passed reinstalled the modem from my original rom not got more success trying to work it more I think it will be better to wait original lollipop should not take out sorry for my bad english

Chetsan Manjunath said:
I have converted my dual sim XT1068 INDIAN variant into XT1064 single sim US variant...and i manually updated to android 5.0 lollipop through adb AND "WORKS LIKE A CHARM"...now i have a single sim variant but my phone doesnt get its network...it just says emergency calls only and "NO SIGNAL TOO"...can someone help me with the radio file ( I dono what it is called when i googled that is what i found. )..??
Click to expand...
Click to collapse
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata

abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin mfastboot.exe erase modemst1 mfastboot.exe erase modemst2 mfastboot.exe flash fsg fsg.mbn mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
Ok...Thank you...please be online i am gonna test it immediately and post the feedback...

humm so there is people here who has converted to US single sim and they are enjoying it right? without network problems, for example, in Europe?

abhi0502 said:
U are not getting network bcoz of modem is mismatched
Flash NON HLOS.bin of single sim only but of different country other than usa
Like in moto g 1st gen for converting from dual sim to single we need to flash modem of uk for network to work
But first try stock modem again with this command u need to delete user data too
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
Click to expand...
Click to collapse
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??

Chetsan Manjunath said:
I am downloading CA firmware now RETCA_XT1064_4.4.4_KXB21.85-16_cid14_CFC.xml.zip...Can i flash NON-HLOS.bin and fsg.mbn of CA for it to work now??
Click to expand...
Click to collapse
Flash all command i have given
U need to check which firmware has single sim then try