Related
Trying to restore my phone which using the RUU toolkit, and it keeps cancleing becaue it can't find my device. I can get to bootloader and TWRP but none of the ROMS are stable enough to stay on. Any ideas?
When I plug my old phone in, it finds the device so I'm sure the right drivers are there...
Stop making up so many threads...
SaHiLzZ said:
Stop making up so many threads...
Click to expand...
Click to collapse
Wouldn't it make sense to start a thread for a specific problem? It makes it easier when someone with a similar problem searches for it on the forums. That way, later you can refer to this thread when someone runs into the same troubles, instead of linking to a 40 page thread and say "Weed through pages 31-39 for the resolution"
Drakeskakes said:
Wouldn't it make sense to start a thread for a specific problem? It makes it easier when someone with a similar problem searches for it on the forums. That way, later you can refer to this thread when someone runs into the same troubles, instead of linking to a 40 page thread and say "Weed through pages 31-39 for the resolution"
Click to expand...
Click to collapse
Anyway, I finally got it to find the device, but it said it wasn't the proper ROM and had to abort...how do I get the right RUU tool?
That is dependant on your fastboot output. You need the RUU to match or exceed your main version and have to have the same CID.
Drakeskakes said:
Wouldn't it make sense to start a thread for a specific problem?
Click to expand...
Click to collapse
I Agree with @SaHiLzZ, it is very difficult for everyone to help you when information on the progress you have made are scattered in many threads...
Drakeskakes said:
It makes it easier when someone with a similar problem searches for it on the forums. That way, later you can refer to this thread when someone runs into the same troubles, instead of linking to a 40 page thread and say "Weed through pages 31-39 for the resolution"
Click to expand...
Click to collapse
There is already good guides for all the issues you encounter, so chances we will refer someone to this thread are slim.
What RUU are you trying to flash, can you post a link? Also an updated ''fastboot getvar all'' of your phone would help.
What OS are you using now? Still on your MAC? If on Windows which version are you using? XP, 7, 8.0, 8.1 ?
alray said:
I Agree with @SaHiLzZ, it is very difficult for everyone to help you when information on the progress you have made are scattered in many threads...
There is already good guides for all the issues you encounter, so chances we will refer someone to this thread are slim.
What RUU are you trying to flash, can you post a link? Also an updated ''fastboot getvar all'' of your phone would help.
What OS are you using now? Still on your MAC? If on Windows which version are you using? XP, 7, 8.0, 8.1 ?
Click to expand...
Click to collapse
Fineeeee
No more threads :crying:
I relocked, and downloaded this
http://www.androidfilehost.com/?fid=23203820527945238
Download Sprint_HTC_One_m7wls_3.04.651.2_RUU.zip
and this
RUU Zip M7 WLS JB 50 Sprint 1.29.651.10 RUU Decrypted
File Size: 1005.6 MiB - Downloads: 2179
MD5: 1043ec107d2e795122c83701f308690e
http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
--- I am back to having to work with a Mac. I can get into the Silver htc one screen from fastboot reboot ruu
but I get a Signature 12 warning
So it seems like all the Sense based ros are the ones that crash. I flashed the stock radio and installed Slim Rom for 4.4 through adb push and install zip, and the ROM runs fantastic, however I'm still in the dilemma of activating my phone
Drakeskakes said:
Fineeeee
No more threads :crying:
I relocked, and downloaded this
http://www.androidfilehost.com/?fid=23203820527945238
Download Sprint_HTC_One_m7wls_3.04.651.2_RUU.zip
and this
RUU Zip M7 WLS JB 50 Sprint 1.29.651.10 RUU Decrypted
File Size: 1005.6 MiB - Downloads: 2179
MD5: 1043ec107d2e795122c83701f308690e
http://www.htc1guru.com/dld/ruu-zip-m7_wls_jb_50_sprint_1-29-651-10_ruu_decrypted-zip/
--- I am back to having to work with a Mac. I can get into the Silver htc one screen from fastboot reboot ruu
but I get a Signature 12 warning
Click to expand...
Click to collapse
S-off is required for decrypted ruu and for downgrade in version. With s-on you need same or higher version ruu (must be signed not decrypted)
Drakeskakes said:
Fineeeee
No more threads :crying:
Click to expand...
Click to collapse
I'll hold you to it don't create many threads for different issues, if one issue leads to the next, use the same thread so others can track your progress and it makes it easier to check for the root causes
alray said:
S-off is required for decrypted ruu and for downgrade in version. With s-on you need same or higher version ruu (must be signed not decrypted)
Click to expand...
Click to collapse
The first one is encrypted
It came from here
http://forum.xda-developers.com/showthread.php?t=2508907
alray said:
S-off is required for decrypted ruu and for downgrade in version. With s-on you need same or higher version ruu (must be signed not decrypted)
Click to expand...
Click to collapse
I hae been painstakengliy trying for s-off for a week. It simply doesn't seem obtainable on mac. Rumrunner and Revone don't work on Mac, and Firewater commands don't work
Drakeskakes said:
I hae been painstakengliy trying for s-off for a week. It simply doesn't seem obtainable on mac. Rumrunner and Revone don't work on Mac, and Firewater commands don't work
Click to expand...
Click to collapse
Now that I had a running stable version of Slimkat running, I was able to obtain S-Off with Firewater
Sooo.....now what?
I can't boot into the RUU screen with -Fastboot oem rebootruu-
Can I install the RUU zip from recovery? Don't I have to be relocked? Which means I can't get into TWRP
I'm so close I can taste it
Drakeskakes said:
Sooo.....now what?
Click to expand...
Click to collapse
Now that you have s-off you can use a decrypted ruu and you can also use ruu of lower version. Good news.
Drakeskakes said:
I can't boot into the RUU screen with -Fastboot oem rebootruu-
Click to expand...
Click to collapse
The command is not ''Fastboot oem rebootruu''
its ''fastboot oem rebootRUU''
its case sensitive!
Drakeskakes said:
Can I install the RUU zip from recovery?
Click to expand...
Click to collapse
NO! You must be in ruu mode to flash a ruu.zip
Drakeskakes said:
Don't I have to be relocked? Which means I can't get into TWRP
Click to expand...
Click to collapse
With s-off you can flash a ruu either with a locked/re-locked or unlocked bootloader.
Code:
fastboot oem rebootRUU
fastboot flash zip <name_of_file>.zip
fastboot flash zip <name_of_file>.zip
fastboot reboot
alray said:
Now that you have s-off you can use a decrypted ruu and you can also use ruu of lower version. Good news.
The command is not ''Fastboot oem rebootruu''
its ''fastboot oem rebootRUU''
its case sensitive!
NO! You must be in ruu mode to flash a ruu.zip
With s-off you can flash a ruu either with a locked/re-locked or unlocked bootloader.
Code:
fastboot oem rebootRUU
fastboot flash zip <name_of_file>.zip
fastboot flash zip <name_of_file>.zip
fastboot reboot
Click to expand...
Click to collapse
Failed
Drakeskakes said:
Failed
Click to expand...
Click to collapse
And tried with a different file
Gave the second command, and it started to write a whole bunch of files. 10 minutes later it said finished, and I rebooted. It boot looped a few times and was giving me the same crash at the homescreen. I was about the throw it across the room when it said "Activate device failed, click here to do it manually"
Followed the steps and the first text message came in, so now I'm installing Slimkat. It's given me a few errors now that it wasn't giving before, but I'll work through it and update.
Drakeskakes said:
Gave the second command, and it started to write a whole bunch of files. 10 minutes later it said finished, and I rebooted. It boot looped a few times and was giving me the same crash at the homescreen. I was about the throw it across the room when it said "Activate device failed, click here to do it manually"
Followed the steps and the first text message came in, so now I'm installing Slimkat. It's given me a few errors now that it wasn't giving before, but I'll work through it and update.
Click to expand...
Click to collapse
Looks like all is working
Drakeskakes said:
Looks like all is working
Click to expand...
Click to collapse
I did sms backup/restore from my old phone, and moved the backup file to my new phone and did a restore. 30,000+ messages. The restore took about 10 minutes, but now when I open message it's very very very behind, and keeps crashing. Should I just let it run it's course?
Hello everyone,
I've been trying to get back to stock on my Sprint HTC One. I have tried using the RUU in this thread: http://forum.xda-developers.com/showthread.php?t=2795856 and no luck. I am HBoot 1.55, S-ON, and running a stock rooted rom that is on 4.4.2
So here is what I tried. I relock my bootloader and proceed to run the RUU, but 2 times I get stuck on 4% so I have no luck. I tried getting S-Off and maybe that could help me bring back to stock, but that did not work either. Really need to get this phone back to Stock, any help is appreciate it, no one responded in that thread so I'm asking here. Thanks in advance.
You'll need to flash the Full Firmware first.
If it still gets stuck try a different USB Port...USB 2 work best or try a different PC.
BD619 said:
You'll need to flash the Full Firmware first.
If it still gets stuck try a different USB Port...USB 2 work best or try a different PC.
Click to expand...
Click to collapse
That is what the video at the bottom of the first post on that thread is about, correct?
Don't I have to be S-Off for that? It says on the video that I have to, and I am not.
PaoloMix09 said:
That is what the video at the bottom of the first post on that thread is about, correct?
Don't I have to be S-Off for that? It says on the video that I have to, and I am not.
Click to expand...
Click to collapse
Use This Firmware
You will need to re-lock your bootloader (fastboot oem lock)
Flash firmware (follow the video)
Run the RUU and you will be back to stock.
You do not need to be s-off to do either.
BD619 said:
Use This Firmware
You will need to re-lock your bootloader (fastboot oem lock)
Flash firmware (follow the video)
Run the RUU and you will be back to stock.
You do not need to be s-off to do either.
Click to expand...
Click to collapse
Trying to flash it but it won't . Fails checking signature. "Signature verify fail"
Sent from crispy tocino
PaoloMix09 said:
Trying to flash it but it won't . Fails checking signature. "Signature verify fail"
Sent from crispy tocino
Click to expand...
Click to collapse
Did you re-lock your bootloader?
Is the firmware in your adb/fastboot/platform tools folder?
BD619 said:
Did you re-lock your bootloader?
Is the firmware in your adb/fastboot/platform tools folder?
Click to expand...
Click to collapse
Yes sir. Relocked, only that at the top it says "security warning." I renamed the folder to firmware.zip and it is on the platform tools folder. Did all the commands, but the second time I run the same command (like it says on the video) it gives me the error I mentioned and I don't even get the loading bar on the phone. Tried 3 times, no luck.
Sent from crispy tocino
Check PM
Same problem actually
BD619 said:
Check PM
Click to expand...
Click to collapse
I am actually having the same issue as described above, and cannot for the life of me figure out what I did wrong.
Any insight?
saxman126 said:
I am actually having the same issue as described above, and cannot for the life of me figure out what I did wrong.
Any insight?
Click to expand...
Click to collapse
So Hboot 1.55, S-ON, and can't go back to stock?
Go to this: http://forum.xda-developers.com/showthread.php?t=2658910
Download that RUU. Now, go into fastboot and relock your bootloader. Flash the firmware on that thread through fastboot, there's a video there showing you how. After that is done, go back to fastboot and you can run the RUU you downloaded from that thread. That's what I did and worked like a charm. Recommended if you use USB 2.0
PaoloMix09 said:
So Hboot 1.55, S-ON, and can't go back to stock?
Go to this: http://forum.xda-developers.com/showthread.php?t=2658910
Flash the firmware on that thread through fastboot, there's a video there showing you how. After that is done, go back to fastboot and you can run the RUU you downloaded from that thread.
Click to expand...
Click to collapse
Hi. You mean flash 4.06.651.4 version at first and then flash 5.05.651.2 version ? Is it update HBOOT from 1.55 to 1.56? What about warning message on that thread "***IMPORTANT NOTE*** you must first update your hboot to 1.56 to flash this 4.06 RUU, see full firmware below ( I recommend being s-off before doing so)"
I have. Hboot 1.55, S-on, Custom ViperOne 7.0.1
kai82 said:
Hi. You mean flash 4.06.651.4 version at first and then flash 5.05.651.2 version ? Is it update HBOOT from 1.55 to 1.56? What about warning message on that thread "***IMPORTANT NOTE*** you must first update your hboot to 1.56 to flash this 4.06 RUU, see full firmware below ( I recommend being s-off before doing so)"
I have. Hboot 1.55, S-on, Custom ViperOne 7.0.1
Click to expand...
Click to collapse
Just flash firmware 4.06.651.4 (you'll be on hboot 1.56) and then run that RUU. Don't worry about 5.05.651.2 firmware or RUU.
Make sure you relock your bootloader before anything.
Whenever the RUU is done and you're back in stock, you'll get the OTAs to 5.05.651.2, just telling you exactly what I did that worked, I also had a lot of trouble getting back to stock/unrooting.
Sent from crispy tocino
Htc One m7
Cıd htc 102
I using hasoon all one tollkıt relock bootlader
After ı dowloand 3 ruu files all error 155 ı cant understand.
I read other topic. Hboot is problem. How ı can back stock firmware now dont open phone... Thanks for help
likonalite said:
Htc One m7
Cıd htc 102
I using hasoon all one tollkıt relock bootlader
After ı dowloand 3 ruu files all error 155 ı cant understand.
I read other topic. Hboot is problem. How ı can back stock firmware now dont open phone... Thanks for help
Click to expand...
Click to collapse
Post a fastboot getvar all except remove your imei and serialno.
Error 155 usually means you are trying to run a RUU that is not compatible with your phone.
majmoz said:
Post a fastboot getvar all except remove your imei and serialno.
Error 155 usually means you are trying to run a RUU that is not compatible with your phone.
Click to expand...
Click to collapse
Or to new 4.x RUU over 1.x firmware will error 155 also
Does anyone know where I can get the lollipop RUU update for an unlocked Att HTC m7?
This is the stock RUU- RUU M7 UL JB 50 Cingular US 1.26.502.12 that flashes JB onto it. Need the Lollipop update
This is the radio :Radio 4A.14.3250.13
I tried both RUUs (ATT 7.23.502.1 did not work & HTC International 7.17.1540.7 did not work) on the HTC site and it didnt work the wizard said model error so am at a loss to which one it could be. Any help to locate the appropriate ROM for my phone please?
Quake105 said:
Does anyone know where I can get the lollipop RUU update for an unlocked Att HTC m7?
This is the stock RUU- RUU M7 UL JB 50 Cingular US 1.26.502.12 that flashes JB onto it. Need the Lollipop update
This is the radio :Radio 4A.14.3250.13
I tried both RUUs (ATT 7.23.502.1 did not work & HTC International 7.17.1540.7 did not work) on the HTC site and it didnt work the wizard said model error so am at a loss to which one it could be. Any help to locate the appropriate ROM for my phone please?
Click to expand...
Click to collapse
http://dl3.htc.com/application/RUU_...06_10.46.1718.01L_release_424933_signed_2.exe
is for AT&T M7, what error did you get? post a "fastboot getvar all" excluding IMEI and s/n
and a screenshot of bootloader
Feedback 1 ATT HTC M7 Lollipop Update
is for AT&T M7, what error did you get? post a "fastboot getvar all" excluding IMEI and s/n
and a screenshot of bootloader[/QUOTE]
Thanks for the link the to the RUU. It didnt work I got an error. The displayed error 158 (invalid ROM).
Here are the screen shots ......................
nkk71 said:
http://dl3.htc.com/application/RUU_...06_10.46.1718.01L_release_424933_signed_2.exe
is for AT&T M7, what error did you get? post a "fastboot getvar all" excluding IMEI and s/n
and a screenshot of bootloader
Click to expand...
Click to collapse
Quake105 said:
is for AT&T M7, what error did you get? post a "fastboot getvar all" excluding IMEI and s/n
and a screenshot of bootloader
Thanks for the link the to the RUU. It didnt work I got an error. The displayed error 158 (invalid ROM).
Here are the screen shots ......................
Click to expand...
Click to collapse
afaik, we need to be at least on kitkat firmware (at least 6.xx.xxx.x). to be able to flash lollipop RUU (7.xx.xxx.x)
Try to flash the 7.23.502.1 stock firmware first (complete firmware not firmware from ota) then the 7.23.502.1 RUU or try an older RUU like the 3.17.502.3 version.
Update 3.17.502.3 successful but stuck there no 7.23.502.1
alray said:
afaik, we need to be at least on kitkat firmware (at least 6.xx.xxx.x). to be able to flash lollipop RUU (7.xx.xxx.x)
Try to flash the 7.23.502.1 stock firmware first (complete firmware not firmware from ota) then the 7.23.502.1 RUU or try an older RUU like the 3.17.502.3 version.
Click to expand...
Click to collapse
Thanks @alray. I have been able to update to version 3.17.502.3 but when I try to update to lollipop 7.23.502.1 using the ATT HTC M7 RUU from the htc site it fails.
It gives me Unkown error 155. ''Connect USB cable to android device". I use fast boot and the installation wizard crashed with Windows message: '' htc fastboot.exe has stopped working''. I have tried several times making sure the android drivers have been installed. Should I check for some special drivers?
Please help to complete final update to lollipop.
Quake105 said:
Thanks @alray. I have been able to update to version 3.17.502.3 but when I try to update to lollipop 7.23.502.1 using the ATT HTC M7 RUU from the htc site it fails.
It gives me Unkown error 155. ''Connect USB cable to android device". I use fast boot and the installation wizard crashed with Windows message: '' htc fastboot.exe has stopped working''. I have tried several times making sure the android drivers have been installed. Should I check for some special drivers?
Please help to complete final update to lollipop.
Click to expand...
Click to collapse
Like I said above, you need to be at least on 6.xx.xxx.x or 7.xx.xxx.x firmware to be able to flash a 7.23.502.1 RUU. Flash the 7.23.502.1 firmware then flash the 7.23.502.1 RUU zip.
And the 155 error is a usb problem. Check you cable, check usb ports, make sure to be connected directly on the computer (not using any external usb hub)
How to flash firmware.zip
@alray can you show me how to flash the 1st stage firmware.zip (6xx.xxx.x) you sent unto the att m7 please? Want to sure to avoid bricking.
Quake105 said:
@alray can you show me how to flash the 1st stage firmware.zip (6xx.xxx.x) you sent unto the att m7 please? Want to sure to avoid bricking.
Click to expand...
Click to collapse
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the ruu using htc_fatsboot. Download it and save it in the same folder you have your normal fastboot.
Code:
htc_fastboot oem rebootRUU
htc_fastboot flash zip ruu.zip
htc_fastboot reboot
hello guys.
i had an htc one m7 ul for a while and all was great until the network stopped working.
so i decided to flash an RUU exe for my device which is HTC___J15
the process did not finish and it gave the error "failed zip" on the fastboot screen.
i rebooted the phone and it went back to the fastboot screen and it never got back in the system, this was two days ago.
yesterday i tried to flash the htc___j15 ruu zip file and it gave me the signature verification failed error.
it says tampered and reclocked *security warning* and my hboot version is 1.61 and os-7.19.401.51
after some reaserch im discovering it says s-on .
is there any way to put it to s-off or downgrade the hboot from 1.61
tried revone,rumrunner and all those did not work
reealumni said:
hello guys.
i had an htc one m7 ul for a while and all was great until the network stopped working.
so i decided to flash an RUU exe for my device which is HTC___J15
the process did not finish and it gave the error "failed zip" on the fastboot screen.
i rebooted the phone and it went back to the fastboot screen and it never got back in the system, this was two days ago.
yesterday i tried to flash the htc___j15 ruu zip file and it gave me the signature verification failed error.
it says tampered and reclocked *security warning* and my hboot version is 1.61 and os-7.19.401.51
after some reaserch im discovering it says s-on .
is there any way to put it to s-off or downgrade the hboot from 1.61
tried revone,rumrunner and all those did not work
Click to expand...
Click to collapse
If your version main is 7.19.401.51 then the only RUU you can flash is the 7.19.401.51 version. You don't need S-OFF to flash this RUU and fyi, S-OFF can only be acheived using the Sunshine S-OFF exploit on this hboot version. Hboot can only be downgraded when already S-OFF.
If you need more help, pleas post the output of "fastboot getvar all" with your next post (hide imei/serial)
The 7.19.401.51 RUU can be found here at post #2 and instruction how to flash at post #1.
alray said:
If your version main is 7.19.401.51 then the only RUU you can flash is the 7.19.401.51 version. You don't need S-OFF to flash this RUU and fyi, S-OFF can only be acheived using the Sunshine S-OFF exploit on this hboot version. Hboot can only be downgraded when already S-OFF.
If you need more help, pleas post the output of "fastboot getvar all" with your next post (hide imei/serial)
The 7.19.401.51 RUU can be found here at post #2 and instruction how to flash at post #1.
Click to expand...
Click to collapse
i will try use the exact OS from your given link. and how do i use SUnshine for S-OFF
reealumni said:
i will try use the exact OS from your given link. and how do i use SUnshine for S-OFF
Click to expand...
Click to collapse
At first you need a running system cause sunshine is an app based service. After that you can download the latest sunshine app and install it, then the app will test your device if it is possible to make it s-off. If it can, in the second step you have to buy a license for your device within sunshine (about 20€/25$). After sucessfully payment your device will reboot and sunshine will set it to s-off.(The license is bind to your device and you can use it on this device as often as you want, for other devices you need to buy another license)
http://theroot.ninja/
phone is now working but...
so guys i flashed the zip using htc-fastboot and the phone is back to normal but with unkown imei and baseband. Thats basically no network
how to fix that now?
reealumni said:
so guys i flashed the zip using htc-fastboot and the phone is back to normal but with unkown imei and baseband. Thats basically no network
how to fix that now?
Click to expand...
Click to collapse
If after flashing the RUU your problem isn't fixed, it's probably an hardware problem.
reealumni said:
so guys i flashed the zip using htc-fastboot and the phone is back to normal but with unkown imei and baseband. Thats basically no network
how to fix that now?
Click to expand...
Click to collapse
Reflash ruu
Or
If you have backup of partition 2,3,4,5. You can restored the partitions that have phone info like imei and serial no with TWRP by if=dd
KARIM9377 said:
Reflash ruu
Or
If you have backup of partition 2,3,4,5. You can restored the partitions that have phone info like imei and serial no with TWRP by if=dd
Click to expand...
Click to collapse
will try reflash the RUU. i do not have any backups of the partitions :crying: