Database Develop

kernel and rom pairing question

im on di11igafs 5.2 newest rom with Firebirds newest kernel flashed. I want to switch to SetrioNs kernel here for some good overclocking. I am unsure which to use and what the difference between his normal and XT versions are. i tried flashing the newest 1.6ghz XT SetrioNs but it freaked out my phone even in recovery menu after 20 seconds it would freeze up after about 20 seconds. Do i need to disable the lagfix in the recovery menu and or something else first? any help would be greatly appreciated . Thanks
Bryan

Your phone is not going to do 1600 no matter how hard you try.

newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
/facedesk
Thats not what I asked about nor did I try to set it at 1.6 ghz. The phone wouldnt even boot long enough for me to change the voltage control settings. So I suppose i should rephrase my question so I dont get another answer like this one. I would like to use SetrioNs kernel, im using Firebirds kernel right now. Are there any steps i need to take in order to properly flash setrions kernel so that i dont have the problems I had previously?

newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
Party pooper.

I know right? Woot woot.

Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.

newter55 said:
Ok, sorry man. Honestly I would suggest downloading the Paragon rom and yanking the kernel out of that. It is much more up to date and allows oc.as high as 1.6. I have used that one without issue. Haven't tried setirons in quite a while so I don't know what may be going on.
Easiest way is to just put the rom zip in your sd card then use sgs kernel flashed app and select the rom zip. It will extract the kernel and flash it for you. Might want to disable lagfix first as sometimes problems occur when jumping back and forth between firebird and others.
Use voltage control 3.0 to control that kernel as well.
Click to expand...
Click to collapse
Ah! Thank You Thats exactly what i was looking for. I only have one question left. If i pull the kernel out of the rom will it be in .tar form? Thanks again

The kernel will be zimage. You can just copy that file straight to your sd card and the kernel flasher app will work with that as well.

Also it would seem that paragon is now using speedmods kernel. would you happen to be able upload the kernel you are using for me?

Give me a few.. have to get off the couch

here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4

newter55 said:
Your phone is not going to do 1600 no matter how hard you try.
Click to expand...
Click to collapse
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze

Stephenxda said:
I got my phone OC to 1600 it was awesome...My screen couldn't handle it though. It froze
Click to expand...
Click to collapse
you are lucky, usually they melt

What are you talking about here. I have my phone oc at 600Mhz and it works just fine. It is very stable and I have no issues with it.

newter55 said:
here you go: http://dl.dropbox.com/u/11343737/zImage
Kernel from ParagonRC4
Click to expand...
Click to collapse
Hey man thanks alot

no problem....sorry the humor in my original post didn't come through

newter55 said:
no problem....sorry the humor in my original post didn't come through
Click to expand...
Click to collapse
Haha not a problem. It just seemed like any post i made today i was getting sarcastic answers XD

Thread Closed Please Delete Mods....

Closed Thread Due To New Thread.... Please Delete Mods

Awesome!
Will try!

Downloading.
Thanks
Edit: oops

Btw, can we expect better battery than the other gb roms?

Tell Me What You Think? Hit The Thanks Button

does it got that rainbow bug???????

Some What You Just Have To Try, Your Experiance Will Be Diffrent Than Mine...
It Should Be Its The Newest Modem...

neobuddy89 said:
does it got that rainbow bug???????
Click to expand...
Click to collapse
Yeah 2 Sec...

hayn_pryde46 said:
Yeah 2 Sec...
Click to expand...
Click to collapse
I dont want to sound discouraging, but why does CM7 and MIUI Gingerbread ROM dont have any rainbow? cant we use CM7 Kernel(Kang's version)
coz Kernel is reason to rainbow I think.
Thank you VERY MUCH for your Efforts..
keep it up!!

neobuddy89 said:
I dont want to sound discouraging, but why does CM7 and MIUI Gingerbread ROM dont have any rainbow? cant we use CM7 Kernel(Kang's version)
coz Kernel is reason to rainbow I think.
Thank you VERY MUCH for your Efforts..
keep it up!!
Click to expand...
Click to collapse
Its Based On Edts Rainbow Roms, No Bootloader... Thats Why Its Not The Kernel

So what's the deal with this Toggle Headset thing?
neobuddy89 said:
I dont want to sound discouraging, but why does CM7 and MIUI Gingerbread ROM dont have any rainbow? cant we use CM7 Kernel(Kang's version)
coz Kernel is reason to rainbow I think.
Thank you VERY MUCH for your Efforts..
keep it up!!
Click to expand...
Click to collapse
1.It's because we don't have Gingerbread bootloaders.
2. CM7 kernels don't work

I'm confused why people are reposting the EDT ROM with basically nothing changed. Users can uninstall and install app themselves. Same goes for Kernels and Modems. None of the original bugs are solved really so I'm confused why this is the second such ROM out today.
I understand it's a great learning experience but from a user standpoint it does not contribute much. I would love when the dev uses the things he/she learned from this to make something.
PS: hayn_pryde46, this is not directed at you nor is this negative. I am very glad you decided to get into the dev game and hope you will become good at it. I'm just unsure your learning experience should be posted as a complete ROM.

why did you port this if it has like NO difference between mine? i mean seriously dude not cool.

Thank you for the previous two posts. I recently got a thread closed because I stated that the dev section is getting polluted with too many roms, which are all the same with minor changes. Im glad im not the only one
Sent from my SGH-T959 using XDA App

ALL he did was download my rom, and re-upload it with some more apps and a different modem/kernel. NOTHING MORE.

Yeah sorry most 98% files are new from xwjvb I just used the rom as base deleted all the files but their init.d tweaks added new build.prop and modem and kernel got mtp sync to work and maybe debugging and original music player remember reboot problems with whitehawks rom, in which he changed it to miui apk
Sent from my GT-I9000 using XDA App

Delete
Sent from my GT-I9000 using XDA App

}{Alienz}{ said:
I'm confused why people are reposting the EDT ROM with basically nothing changed. Users can uninstall and install app themselves. Same goes for Kernels and Modems. None of the original bugs are solved really so I'm confused why this is the second such ROM out today.
I understand it's a great learning experience but from a user standpoint it does not contribute much. I would love when the dev uses the things he/she learned from this to make something.
PS: hayn_pryde46, this is not directed at you nor is this negative. I am very glad you decided to get into the dev game and hope you will become good at it. I'm just unsure your learning experience should be posted as a complete ROM.
Click to expand...
Click to collapse
Literally just came to post the exact thing. It seems to be a trend lately, to the point that it's getting ridiculous. The bugs that exist are pretty big, so how about we either work on those, or sit back and wait for other, more advanced devs to fix them before we start "porting" and call it our work.
I assume you don't have the ability to fix the existing bugs, so that alone should stop you when you go to open a thread for a new ROM that you know you don't have the ability to improve yourself.
I mean, then what? Someone is going to work really hard and eventually fix something, you're going to copy/paste it and call it an update? Just relax on these "ports" for now, they're not needed at this stage of 2.3.3 for the Vibrant.

so you DIDN'T tweak it as it says in your post. You give me NO credit even though you downloaded my rom (which has at least some BIG differences to whitehawks) and just replaced the files that determine the build number added a different kernel/modem and pass it off as your COMPLETE own work. Mine at least fixes some bugs his old rom had (battery drainage, made 3D gaming less sucky). Like cmon dude.

Delete
Sent from my GT-I9000 using XDA App

[Q] GT-I8190N Custom Kernel

Specs :
GT-I8190N with DMod
Hi.
I am desperately seeking for a custom kernel for the above configuration (not for a CM based rom!).
A good governor and I/O-Scheduler to save my battery and my life would be so gorgeous...
Thanx in advance for your time and any help.

shagadelic said:
Specs :
GT-I8190N with DMod
Hi.
I am desperately seeking for a custom kernel for the above configuration (not for a CM based rom!).
A good governor and I/O-Scheduler to save my battery and my life would be so gorgeous...
Thanx in advance for your time and any help.
Click to expand...
Click to collapse
what is the first rule of xda forums?

efaustino84 said:
what is the first rule of xda forums?
Click to expand...
Click to collapse
Let me think... is it - Say something helpful or nothing?!?
Perhaps you should take a look at the second rule...
I am looking and of cause searching for a "none-CM" custom kernel with governors and schedulers for months.
So if i missed something, which of cause could happen, please share your knowledge with me.
Fine regards.

shagadelic said:
Let me think... is it - Say something helpful or nothing?!?
Perhaps you should take a look at the second rule...
I am looking and of cause searching for a "none-CM" custom kernel with governors and schedulers for months.
So if i missed something, which of cause could happen, please share your knowledge with me.
Fine regards.
Click to expand...
Click to collapse
you are about the 5th person i have seen post this question
they also did not take the time to actually search through forums properly
if you had actually searched you would have seen at least 3 threads closed because of people asking the same question again
if you had perhaps asked for assistance in building your dev environment to make a custom kernel for a stock rom then perhaps i would have had something helpful to say
any way i have said my piece
there are no fully working kernels for stock rom N/L/International variants
there have been some attempts and there are a few people who are still trying but these still have a few bugs and may not be a daily runner
from my observations so far, a custom kernel on stock rom for this phone tends to have a bug where you are unable to set the governor in some instances and the CPU stays stuck in 1Ghz

efaustino84 said:
you are about the 5th person i have seen post this question
they also did not take the time to actually search through forums properly
if you had actually searched you would have seen at least 3 threads closed because of people asking the same question again
if you had perhaps asked for assistance in building your dev environment to make a custom kernel for a stock rom then perhaps i would have had something helpful to say
any way i have said my piece
there are no fully working kernels for stock rom N/L/International variants
there have been some attempts and there are a few people who are still trying but these still have a few bugs and may not be a daily runner
from my observations so far, a custom kernel on stock rom for this phone tends to have a bug where you are unable to set the governor in some instances and the CPU stays stuck in 1Ghz
Click to expand...
Click to collapse
I searched this forum and felt the whole internet to death before i decided to post here, and didn´t neither find a working kernel nor any information that there doesn´t exist one.
Perhaps i made a mistake with my search arguments "gt-i8190n kernel", but imho they are as basical as possible.
Atm i stay at the user side, but when i decide to become a dev, i´ll ask for assistance...of cause after using the forum search...
Yfi GoldenKernel is working on the N variant, but of cause without the advanced N features like NFC and so. The dev of this kernel wanted to build a N version of this kernel too, but this information is imho from april´2013...so perhaps he quit working on it...
So i finally hope that a cutom kernel maker will get some free time soon...:fingers-crossed:
Any way, thank you for your help and information!

Kernel without Logo2Wake and Logo2Menu

Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!

Stupid?!
HeavyHDx said:
Hi,
so I'm currently running the Lunar-Kernel because I want to have more clockspeed-cteps, lower minimum clockspeed and voltage-controls so that I can undervolt the CPU slightly which saves a lot of battery.
I just realized that it has this stupid Logo2Wake and Logo2Menu-Feature that I don't need and now I want to know how I can disable those or if there is any kernel that supports those voltage and clockspeed-settings but doesn't have these Logo-Features.
Thanks for your time and help in advance!
Click to expand...
Click to collapse
Ok so because you don't need them, doesn't mean these are stupid features. Devs are working hard to bring those features users asked for. What is stupid imo is someone not searching the forum for something evident. maybe you should read those threads

Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.

HeavyHDx said:
Not a single kernel there that does what I describe above, except this one:
http://forum.xda-developers.com/showthread.php?t=2301543
But the download isn't available anymore.
Click to expand...
Click to collapse
You ca n undervolt and overclock/underclock with elementalx
you can chose what features you want when installing in aroma so you won't be stuck with logo2wake or logo2menu if you don't want them

Yes but it doesn't work with CM11

HeavyHDx said:
Yes but it doesn't work with CM11
Click to expand...
Click to collapse
maybe you should have mentioned this in your op? :laugh:

TeaMSeven kernel for CM11. Why would you not want logo to menu? It is so handy but even if it was there you wouldn't have to ever touch it. Anyway, aroma lets you choose whether to install or not. Btw, my first post after I got my One was asking for a kernel for CM that DID have that feature and I got my a** busted!!
Sent from my GT-p511x

This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.

Anyone? :/

HeavyHDx said:
Anyone? :/
Click to expand...
Click to collapse
If you are looking for a kernel that suites your needs maybe you should look into building one yourself.

HeavyHDx said:
This kernel doesn't have AROMA-Options for all the features :/
I don't need the features and at first I didn't know that they were there, was really confused when the phone randomly woke up or a random menu popped up.
Click to expand...
Click to collapse
I installed and selected those options so I'm sure you could unselect them!
Sent from my GT-p511x

Okay I'll try it real quick

[Q] Kernel

Ok so ive got twrp 2.7 recovery installed and im running malladus 1.2.9 currently and evrything is runnung great right now. Ive been trying to read about some different kernels because my intrest in them has gone up. So my question is what kernel are you running and what do you like and dislike about it if any. I know each phone can react differently to different kernels but i just want to get a feel for things out there before i decide on which kernel i want to try.

I would definitely recommend Furnace 1.7.1 for LG roms. Extremely smooth and snappy

vx2ko said:
I would definitely recommend Furnace 1.7.1 for LG roms. Extremely smooth and snappy
Click to expand...
Click to collapse
Thank you for the recommendation!! Also i forgot to ask, but when i flash a different kernel from stock does it have its own ui to tweak the settings or do i need to install a app to tweak the settings?

jurington said:
Thank you for the recommendation!! Also i forgot to ask, but when i flash a different kernel from stock does it have its own ui to tweak the settings or do i need to install a app to tweak the settings?[/QUOte
Nope no UI....you just flash and thats it.
Click to expand...
Click to collapse

JJT211 said:
jurington said:
Thank you for the recommendation!! Also i forgot to ask, but when i flash a different kernel from stock does it have its own ui to tweak the settings or do i need to install a app to tweak the settings?[/QUOte
Nope no UI....you just flash and thats it.
Click to expand...
Click to collapse
So how do you tweak the settings? Sorry for the noob question but ive never dealt with kernels before and i just want to get all the info i can before i start jumping into kernels.
Click to expand...
Click to collapse

jurington said:
JJT211 said:
So how do you tweak the settings? Sorry for the noob question but ive never dealt with kernels before and i just want to get all the info i can before i start jumping into kernels.
Click to expand...
Click to collapse
You can download an app called Trickster MOD Kernel Settings, or Kernel Tweaker. If your ROM supports it, you can find kernel settings in the settings application.
Click to expand...
Click to collapse

hiddenfive said:
jurington said:
You can download an app called Trickster MOD Kernel Settings, or Kernel Tweaker. If your ROM supports it, you can find kernel settings in the settings application.
Click to expand...
Click to collapse
Personally I like Trickster Mod simply because Ive used it the longest. It gives you a wide range of things to tweak as long as the kernel itself provides them.
Click to expand...
Click to collapse

vx2ko said:
hiddenfive said:
Personally I like Trickster Mod simply because Ive used it the longest. It gives you a wide range of things to tweak as long as the kernel itself provides them.
Click to expand...
Click to collapse
I used it until my settings were being reverted every time I applied the changes.
Click to expand...
Click to collapse

hiddenfive said:
jurington said:
You can download an app called Trickster MOD Kernel Settings, or Kernel Tweaker. If your ROM supports it, you can find kernel settings in the settings application.
Click to expand...
Click to collapse
LOL....yea my bad, I just discovered that on C-Rom today.
Click to expand...
Click to collapse

JJT211 said:
hiddenfive said:
LOL....yea my bad, I just discovered that on C-Rom today.
Click to expand...
Click to collapse
Do you have any connection problems on CROM? Like no 3g, always roaming?
Click to expand...
Click to collapse

hiddenfive said:
JJT211 said:
Do you have any connection problems on CROM? Like no 3g, always roaming?
Click to expand...
Click to collapse
There is 3g that is why it says roaming. Its not "always roaming" it only displays that when you're on 3g.
Turn on allow data while roaming and you're set. Its cosmetic, it doesn't roam.
And based on the c ROM thread, yes, it is there.
Until cm fixes it and the changes are merged to whatever ROM or the ROM devs fix it themselves it will be there.
Sent from my VS980 4G
---------- Post added at 03:48 PM ---------- Previous post was at 03:44 PM ----------
jurington said:
JJT211 said:
So how do you tweak the settings? Sorry for the noob question but ive never dealt with kernels before and i just want to get all the info i can before i start jumping into kernels.
Click to expand...
Click to collapse
Every kernel is different in what you can change. Take the lg stock kernel. No access to voltages and whatever else. On a custom kernel you may have access to it (if the Dev allows)
Also if you flash dominax it will install stweeks as well, basically his version of trickster.
If your phone isn't slow, why flash a custom stock kernel? I'm currently on 1.2.9 malladus with animations turned off, and its snappy as hell.
Stock kernel = no issues and best battery life.
Custom = possible sod's even on stock.
Sent from my VS980 4G
Click to expand...
Click to collapse
Click to expand...
Click to collapse

hiddenfive said:
JJT211 said:
Do you have any connection problems on CROM? Like no 3g, always roaming?
Click to expand...
Click to collapse
Nope, not really. Today I was in an area where I normally don't get 4G, phone then said it was roaming, but that was expected. I was having some wakelock issues while charging in the car when my phone was super low on battery (forgot to charge last night), screen kept coming on while chraging when I was trying to conserve every last bit of juice.
That being said, it's by far the best ROM I've seen yet. I've never seen so many features packed into one ROM before. IT makes PAC Man ROM look like stock. Its awesome! Def check it out!
Click to expand...
Click to collapse