Hey guyz i need to share my problem with you guyz.first of all i would like to say 136 firmware is the best till now but only there is one problem i am facing since i upgraded. Whenever i am playing the audio in my car audio system which have bluetooth functionality the audio gets broken sometime and it came again after few seconds but the thing is there is no problem when i am listening to the headphones or loud speaker, this problem only occurs while playing audio through bluetooth.
Plx guyz let me know if there is a solution for this issue
Sent from my C6903 using xda app-developers app
If you don't have problem with other devices that mean is the Car Audio causing the problem, not the phone.
Dude i am not saying that i checked with other bluetooth devices. I jus said i checked with load speakers and headphone jack not with any bluetooth device except car sterio. And by the way it was working very good with 4.2.2 m using since 4 months
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Dude i am not saying that i checked with other bluetooth devices. I jus said i checked with load speakers and headphone jack not with any bluetooth device except car sterio. And by the way it was working very good with 4.2.2 m using since 4 months
Click to expand...
Click to collapse
Flash the "Baseband" only from 4.2.2 on 4.3 with Flashtool.
Are you sure 4.2.2 baseband is related to this problem? And baseband will work in 4.3?
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Are you sure 4.2.2 baseband is related to this problem?
Click to expand...
Click to collapse
If I am not wrong Baseband is a package with all the radio frequency needed for the phone to work properly. BTW, you can flash back the baseband for 4.3 in the same way.
shahzaib.khan said:
And baseband will work in 4.3?
Click to expand...
Click to collapse
Downloade the right 4.2.2 FTF, the one where bluetooth was working, and via Flashtool exclude everything except Baseband and flash it on 4.3. It will work, this was confirmed by users with weak radio signals.
Thanks ill try it tomorrow again
Sent from my C6903 using xda app-developers app
eclyptos said:
If I am not wrong Baseband is a package with all the radio frequency needed for the phone to work properly. BTW, you can flash back the baseband for 4.3 in the same way.
Downloade the right 4.2.2 FTF, the one where bluetooth was working, and via Flashtool exclude everything except Baseband and flash it on 4.3. It will work, this was confirmed by users with weak radio signals.
Click to expand...
Click to collapse
i have just flashed baseband from 4.2.2 (257).
will feedback if it works.
chunlianghere said:
i have just flashed baseband from 4.2.2 (257).
will feedback if it works.
Click to expand...
Click to collapse
:good:
Thnx alot it worked.
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Thnx alot it worked.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Did you have any issues with connecting your phone to the car audio and making handsfree calls on .290 and .136? Because when I got my phone (running 4.2.2 and .257) it worked ok. I was able to make and recieve calls through the bluetooth using the handsfree of my car audio. When I upgraded to .290 (and also .136) the car would pair with the audio but the handsfree facility did not work! I "downgraded" back to 4.2.2 (.257) and it now works again.. I was wondering if I could use the method that you used - i.e. flash .136 and then flash the baseband of .257.
Regards,
Alan
nalab1 said:
Hi,
Did you have any issues with connecting your phone to the car audio and making handsfree calls on .290 and .136? Because when I got my phone (running 4.2.2 and .257) it worked ok. I was able to make and recieve calls through the bluetooth using the handsfree of my car audio. When I upgraded to .290 (and also .136) the car would pair with the audio but the handsfree facility did not work! I "downgraded" back to 4.2.2 (.257) and it now works again.. I was wondering if I could use the method that you used - i.e. flash .136 and then flash the baseband of .257.
Click to expand...
Click to collapse
Why you asking this again, I already told you in other thread to flash the baseband, why you downgraded the whole System? If we confirming you it's working the question is useless.
I havnt tried using phone with my car sterio because i dun like to receive calls in ma car audio system..
But im sure it will work aftwr flashing old basebands
Sent from my C6903 using xda app-developers app
eclyptos said:
Why you asking this again, I already told you in other thread to flash the baseband, why you downgraded the whole System? If we confirming you it's working the question is useless.
Click to expand...
Click to collapse
Hi eclyptos,
I just thought that I would ask the original poster.. As his issue was different to mine..as in his was a problem with streaming music.. Not a problem with the handsfree making phone calls via the car audio system
Sorry if I duplicated my question..
Regards,
Alan
eclyptos said:
If I am not wrong Baseband is a package with all the radio frequency needed for the phone to work properly. BTW, you can flash back the baseband for 4.3 in the same way.
Downloade the right 4.2.2 FTF, the one where bluetooth was working, and via Flashtool exclude everything except Baseband and flash it on 4.3. It will work, this was confirmed by users with weak radio signals.
Click to expand...
Click to collapse
thanks!
it works for me too. bluetooth working all well. except for 1 small pause, but acceptable for me.
chunlianghere said:
thanks!
it works for me too. bluetooth working all well. except for 1 small pause, but acceptable for me.
Click to expand...
Click to collapse
Better than nothing.
Ecliptos do u have any idea how to solve the sensor problem while we are talking on the phone and we want to look at the screen it takes 2 seconds almost to turn onn...
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Ecliptos do u have any idea how to solve the sensor problem while we are talking on the phone and we want to look at the screen it takes 2 seconds almost to turn onn...
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
edit the build prop?
Code:
Proximity (Disable blackscreen issue after call)
mot.proximity.delay=0
ro.lge.proximity.delay=25
shahzaib.khan said:
Ecliptos do u have any idea how to solve the sensor problem while we are talking on the phone and we want to look at the screen it takes 2 seconds almost to turn onn...
Click to expand...
Click to collapse
I think if you calibrate the sensors this can help. Type *#*#7378423#*#* on keyboard and calibrate all of them.
I cannot find the values in build.prop
I checked with the its not calibrating the sensor and showing me the -99 error
Sent from my C6903 using xda app-developers app
Related
hi
Its my first post here and i will try to explain my problem.
I have a note n7000 wich have an out of order sim support. Its not a problem for me because i use it as little tablet.
I tested some kernels and rom from xda and i actually use crash rom v10 with 240 dpi mod and speedmod kernel v13.
Since a couple of day i try to use s voice and others but it seems that no sound is recognize. It try soundhound and same problem.
Vocal memo included in the rom doesn t record any sound too.
So i thought my micro was out but it works perfectly in camera mode.....
Does any one have an idea ?
Have you tried microphone operation with a headset? Best to rule out where the problem lies.
Sent from my GT-N7000 using xda app-developers app
i gonna try, but its not a real solution
yaan said:
i gonna try, but its not a real solution
Click to expand...
Click to collapse
Not a solution, just to verify if it's hardware or software.
Sent from my GT-N7000 using xda app-developers app
With headset microphone all seems to work normaly.
Without headset skype and video are working well.
With the microphone headset, in soundmeter apk the initial sound level is about -8 -9db and it move normaly to 50 or 70 db when talking or whatelse.
Without the headset initial value is at -50db and doesn't move....
Using camera with headset get no sound in movie.
I don't understand anything.
yaan said:
With headset microphone all seems to work normaly.
Without headset skype and video are working well.
With the microphone headset, in soundmeter apk the initial sound level is about -8 -9db and it move normaly to 50 or 70 db when talking or whatelse.
Without the headset initial value is at -50db and doesn't move....
Using camera with headset get no sound in movie.
I don't understand anything.
Click to expand...
Click to collapse
The fact that it's working fine without headset on Skype suggests its not hardware related. What rom are you on?
Sent from my GT-N7000 using xda premium
I am on crash rom v10 lr1 lrt with speedmod 13 kernel
Have you posted in the crash rom thread? I would suggest its a rom issue.
Sent from my GT-N7000 using xda premium
You were right, i just install stck rom and all works fine and then reinstall crash rom and all works well.
Thank's.
Good news, well done
Sent from my GT-N7000 using xda premium
Hello,
I tried different JB ROMs and every ROM makes problems with my BT Handsfree Kit in my car. I can pair the phone to my car and it rings when I get a call. But I cannot here anything about the speakers in the car. Only the ring.
I this a bug in 4.2.1? ICS works great
rhartinger said:
Hello,
I tried different JB ROMs and every ROM makes problems with my BT Handsfree Kit in my car. I can pair the phone to my car and it rings when I get a call. But I cannot here anything about the speakers in the car. Only the ring.
I this a bug in 4.2.1? ICS works great
Click to expand...
Click to collapse
Known problem of Android 4.2. Flash ICS or JB (4.1)
Sent from my LG-P990 using xda app-developers app
Known problem of Android 4.2. Flash ICS or JB (4.1)
Click to expand...
Click to collapse
Always good to know.
kaspar737 said:
Known problem of Android 4.2. Flash ICS or JB (4.1)
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
And nothing could be made? ((
I am also having this problem.
thanks for pointing out that it not works on 4.2.1
I am using the newest paranoid android on JB 4.1.2. and experienced some random disconnects,but mostly works fine.
Tried with built in bluetooth speaker in BMW 5.
Sent from my LG-P990 using xda app-developers app
AW: No BT on JB 4.2.1
That's the reason why I stay on cm10 last nightly. Kowalsky kernel adds the last bit of fluidity to the Rom. Perfect
Sent from my LG P990. CM10 0107, kowalsky kernel#011p4
Keczanm said:
I am using the newest paranoid android on JB 4.1.2. and experienced some random disconnects,but mostly works fine.
Tried with built in bluetooth speaker in BMW 5.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Seriously you shouldn't have random disconnects, you should check your car for bugs.
sysex said:
Seriously you shouldn't have random disconnects, you should check your car for bugs.
Click to expand...
Click to collapse
This.
Sent from my LG-P990 using xda app-developers app
Great sound mod for xperia zr
Refer to this thread. http://forum.xda-developers.com/showthread.php?t=2190558
Flash through cwm...
Sent from my C5502 using XDA Premium 4 mobile app
comaster said:
Great sound mod for xperia zr
Refer to this thread. http://forum.xda-developers.com/showthread.php?t=2190558
Flash through cwm...
Sent from my C5502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the stock sound is good enough for me..
anyone else tried this? any noticable improvements?
superbonto said:
the stock sound is good enough for me..
anyone else tried this? any noticable improvements?
Click to expand...
Click to collapse
Found some increase in volume...deeper bass...more clear but may feel crisper on listening to high volume...overall good one
Sent from my C5502 using XDA Premium 4 mobile app
can this be flashed through locked bootloaders?
kilsmap said:
can this be flashed through locked bootloaders?
Click to expand...
Click to collapse
yes this can be flashed on locked bootloader?
i have locked bootloader and flashed it.
Working great!!
Ok.. Good to hear that.. Cos i tried it the other day and it gives me bootloops.. Lucky i made a nandroid backup before that.. Now scared to try again..
Sent from my C5502 using xda app-developers app
Tried it on unlocked bootloader deodexed rom working fine
Sent from my C5502 using XDA Premium 4 mobile app
Sound is great but Bluetooth audio and call do not work. I tested with my SBH50 and MW1.
Works almost perfect except for one major flaw. Bluetooth call handling doesn't work on my ZR. When a call is made or received, there is no audio. I can't hear what the other party is saying. Please fix this. I'm using stock jb 4.2.2, and the Bluetooth headset I am using is Sony smart wireless headset pro.
Otherwise the mod is great.
Sent from my C5503 using xda app-developers app
avik735 said:
Works almost perfect except for one major flaw. Bluetooth call handling doesn't work on my ZR. When a call is made or received, there is no audio. I can't hear what the other party is saying. Please fix this. I'm using stock jb 4.2.2, and the Bluetooth headset I am using is Sony smart wireless headset pro.
Otherwise the mod is great.
Sent from my C5503 using xda app-developers app
Click to expand...
Click to collapse
The dev of this mod wont fix this bug because he does not own any bluetooth headset This is PureXAudio mod for Xperia Z and it also works on ZR.
Hi I've bought a z1 since 1 month and i'm very satisfied about all but I notice a little bug wich is very annoying. When I take some video, audio is asynchronized than video. I'm on. 136 rooted. Thx if you can help me solve this bug
Sent from my Z1 !
Put the file on PC and play it, the Audio is synchronized?
Same
I've just tried and still the same :/ I'm on LB and have Xposed with 20mp auto mode if it can help.
I have the same issue also after upgrading to 136 video audio become silence for few seconds and it comes back again
Sent from my C6903 using xda app-developers app
For me audio still but it come about 2 sc after the right video movement
Sent from my Z1 !
Elfeno said:
For me audio still but it come about 2 sc after the right video movement
Sent from my Z1 !
Click to expand...
Click to collapse
I don't remember well as I don't get back yet mine Z1, can you use different format for recording videos?
Weird fact, i've Just try with the 3 modes (auto, manual 720p &1080p) no more audio recording lag... Maybe a random issue because this happen a few times. But at this moment it work I don't know why. I'll come back if this persist or if someone have the same issue =)
Sent from my Z1 !
Change the baseband to older version and your good to go
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Change the baseband to older version and your good to go
Click to expand...
Click to collapse
I don't know how baseband can improve the quality recording, are you sure about that? I know the baseband is the Radio Package for Z1 like Bluetooth, Network and WiFi.
Give it a try if there was no problem in older version then may be its the same issue with the baseband
Sent from my C6903 using xda app-developers app
Hello, i recently updated my Sony Xperia Z1 Model No: C6902 with the latest kitkat update but after the update their is disturbances heard in the message notification tone....what shall i do? is there a problem with the update itself?
Maybe, to early to say if it is a bug, some users have to report it as well too. Try Factory Reset first, it will wipe your data but it will clean up after update.
abhimudaliar said:
Hello, i recently updated my Sony Xperia Z1 Model No: C6902 with the latest kitkat update but after the update their is disturbances heard in the message notification tone....what shall i do? is there a problem with the update itself?
Click to expand...
Click to collapse
Do you have any mods installed that may have restored with titanium when you reinstalled the rom?
Could be that something is not playing nice with the new base.
Attempt a clean install with no restores and test the audio, then restore and if it comes back after the restore you'll know if it's a rogue app / mod or not.
abhimudaliar said:
Hello, i recently updated my Sony Xperia Z1 Model No: C6902 with the latest kitkat update but after the update their is disturbances heard in the message notification tone....what shall i do? is there a problem with the update itself?
Click to expand...
Click to collapse
Me too after update with NUT pre-rooted rom.
Its Pure stock and no mods installed...i even wrote a mail to sony customer care abt this...they said to factory reset the phone...i did that too but still the disturbance can be heard in the message notification tone.
abhimudaliar said:
Its Pure stock and no mods installed...i even wrote a mail to sony customer care abt this...they said to factory reset the phone...i did that too but still the disturbance can be heard in the message notification tone.
Click to expand...
Click to collapse
I as well am having the same issue. The notification "skips" if you will at the beginning first 1-2 seconds of any notification. I have not noticed if this issue is present in a phone ring yet, only in notifications.
So, no solution yet?... I have same issue... And this notification ringtone is annoyed...
Sent from my C6903 using xda app-developers app
I have the same issue the sounds go to their 20% or may be less. Cannot hear anythimg sometimes need to restart is the only solution
Sent from my C6903 using xda app-developers app
Febrizzio said:
So, no solution yet?... I have same issue... And this notification ringtone is annoyed...
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
I have try factory reset, but sound still noise. And some time 1-2 second got flicker...
And this is very annoyed..
Sent from my C6903 using xda app-developers app
Shahzaib.khan I don't believe your referencing the same bug we are discussing. If I'm not mistaken your discussing the sound through the internal earpiece instead of the loudspeaker. We are referring to a notification tone which skips when being played during an actual notification
Sent from my C6903 using xda app-developers app
Vlcano yeah i guess. Thats why i am following another thread. Thank you
Sent from my C6903 using xda app-developers app
So there is no solution for this?
Sent from my C6903 using xda app-developers app
Same annoying problem here. Stuttering notification sound and sometimes the ringtone gets really low (10%).
Only a reboot fixes the problem. But after after a few hours it's back again :crying:
Guys i guess i was right at the first place
I comeback to 4.4 from the start
I flashed xperia ultra firmware which is modified by nut then i put 156 of xperia z1 then i root it and flash recovery on it and then formated every thing except external card, i formated internal memory also. And yes till now received 5 calls there is no problem...
Try it every one
Sent from my C6903 using xda app-developers app
Sorry guys the above method also didnt work. In short kitkat from sony sucks. Sony developers need to learn something from the xda developers.
Sent from my C6903 using xda app-developers app
So we just wait the next fixed firmware from Sony?
Sent from my C6903 using xda app-developers app
Hi,
Is this problem solved now for you after the update to .757?
It hasn't for me. I still get the annoying broken/disturbed notification tone many times even after a clean install of the FW .757.
I am on stock ROM, non rooted. I really do want to know which app is playing rogue, if it is an app. I thought after the few updates to the walkman app, it may solve the issue, but it didn't.
JK