[Q] One "bricked" after installing OneDroid with CM11 - One (M7) Q&A, Help & Troubleshooting

Heyho,
so i make it short and i hope you can help me.
I had a long time InsertCoin on my One.
I want to change it and search for Cyanogenmod. On my HTC DHD it works great. But that's only 7.3 or so.
Sure, i want to have the new CM 11 with KitKat. On InsertCoin i had KitKat too but there weren't the KitKat Features like klicking on KitKat System info to open an animation.
I search and find OneDroid Here in xda-developers
So download and copied to my internal storage.
Let's go to the Recovery. ( Before that. i had backed up my device with TWRP and Titanium Backup and copied the data files to my PC for recovering)
So i click install, choose the Rom. its start, doesn't find an MD5 File (IDK what that is but in insertCoin it wasn't there too and it works) after some minutes it says sucessfull installed. It restart.
The restart takes up to 10 minutes. And Yeah! What i see? The Lockscreen... For 1 second. Then i got very very very very lot messages of: process.com.phone has stopped or else. The CyanogeMod Account Programm stopped too.
I cant click anything - nothing possible. so i turn off and tryed to install my Backup but that was on my PC and one OneDroid Crashes the PC Driver wont be loaded.
I tried to get the OneDroid Rom over adb sideload to install (maybe the Zip on my phone was broken??) but the same. Crashes about crashes.
At the moment i try to install InsertCoin over ADB Sideload. First Try failed. he stand by 0 for over 10 minutes.
After that i will load my Backup to my internal Storage and run that.
I hope it works!!!!
ok... doesnt work... Mod edit removed suggestion of swear word.
Can you help me???

Note to OP,
I have moved your thread into the Q&A section. Also I have edited your post and removed the suggestion of the swear word. Just to let you know swearing is not allowed on XDA,
Many thanks,
Ghost

Did you forget to wipe data and system (NOT SD CARD) before installing the ROM?

SaHiLzZ said:
Did you forget to wipe data and system (NOT SD CARD) before installing the ROM?
Click to expand...
Click to collapse
do you mean on my rom which i got with the Sideload?

BEFORE you sideload or install a new ROM..

with OneDroid if you don't do a clean install (wipe before install) cyanogenmod account will crash every time and make the phone unusable. make sure to wipe first also when reflashing onedroid after using for a little while if phone disappears and doesn't work properly flash a stock gpe rom and then reflash onedroid on it to fix.

No I have clicked wipe cache and system
Thx. Marcmicalizzi - but that not solve my problem. I thought it will ask me whether I want to perform a full wipe, therefor I was a bit wondered that I haven't any preferences which I can change in the installation
So I found the solution and have a next question.
At first the solution for the "experienced users" and as second the faster and easier solution. Both work!
So if your Device crashed all the time because you didn't perform a full wipe, hopefully you have installed your programs for rooting your one. With that you can sideload a Rom and install it. Click at the aroma installation perform a full wipe!!!
If you want to do it very very easier and you don't have so much skills and experience in adb via commands you can install the all in one rootkit for the HTC one. Left down, there is a list. The first entry is the command for sideload a Rom. Click on it and follow the tips on the screen. On TWRP you start the sideload mode in the recovery under advance/sideload.
So you can fix your phone
WARNING!! Very important is (by me it hasn't work without it) if you start the sideload mode on your phone, don't check wipe cache and wipe dalvik cache.
It hasn't began the installation.
Tomorrow I can upload some pictures and links
So I'm back to InsertCoin.
One question. Before I want to switch to onedroid, I did an Rom backup. I want to restore it but it stopped and didn't go further...
After 20minutes I break that up and install the Rom clear.
Are I'm allowed to copie the backup to my PC and later again back to my one? I gave it a new name but renamed on my phone the old name.
Is that one of the reasons that it didn't work correctly?
Thx.
Best regards Sharin
Sent from my HTC One using Tapatalk

Related

need help! sorry in advance

so im new to the android world please be gentle. i just got my nexus one today trying to get it rooted so that i can get the modacos desire rom up and running. so far using these instructions
http://theunlockr.com/2010/01/08/how-to-load-a-custom-rom-on-the-nexus-one/
ive gotten the phone to reboot with a padlock at the bottom, it will let me run torch so i assumed it was rooted. i put both nandroid folder and the sense ui rom zip files but when i try to put the phone into recovery mode it gives me the android dude and an exlamation mark. sorry if this is a common problem or i missed some simple instructions. thanks for any help.
Sounds like you did step I on that page, but might have missed step II completely and didn't flash the custom recovery rom.
Try here instead for a full tutorial on the exact steps needed to get to the Desire rom:
http://forum.xda-developers.com/showthread.php?t=636795
But you can skip the unlocking of the bootloader, as it seems you got that done.
amazing! thank you
hey ive tried a couple different methods but cant seem to get rid of this com.google.process.gapps message after i enter my google info. ive removed everything from my memory card. wiped a hundred times, flashed several diffent roms. it popped up first on the newest cyogen rom after installing a couple of programs, not sure which one did it. is there a way to manually clear the google info on the phone because it seems to be stored in there. thanks
So I'm assuming you already got recovery... Did you wipe data / cache / dalvik before flashing the ROM? Did you also flash Gapps? Give that a try. That should help.
yeah i wipe all the devlik/ cache along with regular wipe each time before a install. what is gapps?
GoogleApps.
Go to this link
http://forum.cyanogenmod.com/index....xus-one-v506-04152010/page__view__getnewpost?
Download Google Addon
Flash over cyan ROM.
thatg said:
yeah i wipe all the devlik/ cache along with regular wipe each time before a install. what is gapps?
Click to expand...
Click to collapse
cool that did it, back to cyogen, wish the desire rom was as fast as the cyogen. thanks for the help man!
if theres a desire status bar i want to install can i just flash the zip or do i have to back everything up do a wipe and install everything all over again?
Yes, you can flash themes over the ROM without wiping, as long as the theme is compatible with the ROM.
thatg said:
cool that did it, back to cyogen, wish the desire rom was as fast as the cyogen. thanks for the help man!
if theres a desire status bar i want to install can i just flash the zip or do i have to back everything up do a wipe and install everything all over again?
Click to expand...
Click to collapse

Unfortunately the setup wizard has stopped

i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated
russy23 said:
i installed the NAA kernal and CM9, and all going great, i did however realise that i needed to install gaaps, so i placed on card, rebooted into recovery and installed, all going good, and then after bootup where you tap the android man to continue. this is what i get 'UNFORTUNATELY THE SETUP WIZARD HAS STOPPED'..
I cannot bypass this. ive tried installing two different gapps on it, and both times this..
any help would be appreciated
Click to expand...
Click to collapse
woow
what do you mean with stop??
maybe you try it again
flash the kernel
backup
factory reset etc
Flash ROM
Flash gaaps
done!
try to clear dalvik cache from cwm -> advanced
Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/
cassiopee5 said:
Hello guys!
I'm new to the forum, and a total noob when it comes to android. I have a VERY similar problemToday I installed the latest version of CM. Worked fine. I installed gapps. Now when I turn on the device, it just shoes the message and I can't do anything. I wanted to try reflashing a newer version of gapps, but I can't put it on my sd card, because my computer won't detect it anymore...I can't use my phone at all, I am starting to panic :/
Click to expand...
Click to collapse
Get a card reader
wanna thank xda? here
unzip the rom with winrar you leave two folders that enters the system says and go to the folder that says-app-here clears-app-setup wizard again after that compress the two files that were decompressed - metainf--system-with-winrar-do not forget to put format .zip and you have the zip file to your sd put it, install it normally..
Unfortunately the message has stopped the setup wizard should no longer appear
sorry my bad English
Wizardloop
yeah i got almost the same problem but with few key differences:
i pimped up my android with pimp my rom, the system ui stopped unexpectetly and when i factory reset my phone i got stuck in so-called
wizardloop. so now i want to re-download my stock rom but i dont know any tools that helps me.kdz is for lg only and flashtool is for xperia.
i have prestigio 4055 usb driver.
so can anyone give me some advice? It will be highly appriciated.
maybe reflash kernel and after instal rom, maybe help to you problem.

[Q] No OS installed

I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Hi Mate dont panic it´s easy to fix have u try any Nflash procedure yet ?
Try Stefans V28G via nflash:
http://forum.xda-developers.com/showthread.php?t=1986097
Direct link: http://d-h.st/PNj
Installation NVFlash version (under Windows): (internal SD will be wiped, /data partiton can be saved and restored with 2nd generation builds)
download the ROM, unpack it with WinRar, 7Zip or similar to any folder you want
take battery out of phone, press VOL + AND VOL - simulataneously, and while doing this plug the phone via USB to your PC
screen of phone remains black, this is normal, but you should hear a sound that you plugged the device. Probably you have to install APX drivers at this point if you are asked. They are included in the latest NVFlash builds. Tutorial on driver installation: http://www.modaco.com/topic/335416-n...-links-active/
assuming that you already installed APX drivers: run the "flash_windows.bat" file in the folder where you extracted the ROM
follow the instructions
That's already it Usually no complications to be feared. Enjoy!
Click to expand...
Click to collapse
You can connect phone to pc and copy a cm10, don't reboot phone, you must mount mass USB storage. Copy and flash: )
Inviato dal mio LG-P990 con Tapatalk 2
Will try it out
Thanks Domfis and Creison, I will try it out and see what happens. I hope it works :fingers-crossed: out cause I really do not wish to change my phone now that official ICS is out. If I manage to do this I will wait till summer to change my phone. Currently using my old nokia 3310
teddycypria said:
I had installed CM10 on my optimus 2x but I had a problem with the rom so I tried to flash another rom.
By mistake I wiped data, davlik-cache and everything else. So I don't have a backup. When I try to install another rom through TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot?
Please I only want to return to the original stock rom and upgrade from that to ICS. I found the guide on how to update to ICS so all I'm asking for is how to get out of this No OS installed trouble.
I appreciate alll effort.
Click to expand...
Click to collapse
Please ask all questions in Q&A. Thread moved there.
teddycypria said:
Currently using my old nokia 3310
Click to expand...
Click to collapse
ROFL!!! :laugh:
assistance plz
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
infamous215 said:
also getting same message.but when flashing rom says no os want to continue. any help would be great. still have stock rom.
Click to expand...
Click to collapse
i suppose you're on the old bootloader? then just use AIO Toolkit ->> http://forum.xda-developers.com/showthread.php?t=2020737
Use Option 4, then you'll get the new bootloader and CWM installed. Afterwards just flash a ICS Rom or CM10(ICS BL) via CWM!
error
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
mahesh dimuthu said:
I have had LG P9920 Rooted phone and its working smoothly( I rooted my phone using cyanogenmod 10.2 and super user cmd ) .yesterday I try to install new kikkat os for my rooted lg phone . and I am download new recovery .img and zip file ,then I mounted twrp recovery .img file in command line in phone (dd-if ….)after mount that .img I restarted my phone and boot up twrp the I wiped data, davlik-cache and everything else. So I don't get a backup. Then system and android data I wiped.it error shown “e: unable to mount sdcard .system and fail to factory reset “…
I cant see internal memory its show 0mb.so I tried to several time wiped data and everything, but finally “TWRP is says that it failed and afterwards it says No OS installed, Are you sure you want to reboot? “
Please anyone who can have same idea above this matter please help me, I appreciate all effort.
Click to expand...
Click to collapse
Since data is lost anyway, try running AIO toolkit to reflash the bootloader which also fixes recovery and partitions.

'do a wipe' ? not sure what this means exactly, maybe it is what i need to do?

I have a HTC ONE m7, rooted, I have been running CM11, flashing the nightlies with great success. When CM12 came out, it 'soft bricked' my phone, continuous reboots, failing android functions. was able to reinstall Titanium backup, then restore the phone to a previous point. back running, but not without bugs. after trying this 3 times, I have given up. but I read where people say, "do a wipe" then flash the ROM....... What, specifically does this mean?
yes I have rooted my phone, but I am just knowledgable to be dangerous. if It means back to factory specs, then how do I flash the rom? I think that my phone should run CM12, and maybe I need to wipe? wipe what? dalvic cache? is that a wipe?
Anybody have some ideas or can point me to some postings that may help me. Many Thanks, very tired of operating on the last build of CM11
blairan
Do a wipe typically means wipe the data, system, cache, and dalvik cache partitions. If you are using TWRP as your recovery (I do for this phone), boot into it and then press Wipe, then Advanced Wipe. Select those four (not internal storage or USB OTG) and then Swipe to Wipe. Of course, your phone won't boot at this point, so you'll need a new ROM waiting on internal storage to be flashed.
thankyou Coal, I have been trying to install a CM12 and/or a CM12.1 ROM I can get them to boot up, but play store is not present. I can access play store via themes, and it comes up as a web page rather than an app. (is this norm for CM12?)
once I sign in to play store, I try to install titanium backup to restore all my apps. it says it is installed, I press it anyway, and it says it will be installed soon, which never happens. CM12 and CM12.1 seem to be running fine, but I can't restore any of my old phone. I can recover to a CM11, but it is a little unstable, so I would like to upgrade the system and be flashing nightlies again. what do you think?
and after watching a few videos on you tube, I figured out that I was missing the Gapps file, and the supers file. enjoying lollipop success.
thanks coal!
blairan said:
and after watching a few videos on you tube, I figured out that I was missing the Gapps file, and the supers file. enjoying lollipop success.
thanks coal!
Click to expand...
Click to collapse
I was going to suggest GAPPS, but I wasn't sure if you needed it for CM. Glad you figured it out!

Stuck on fastboot and recovery with hboot 1.61 S-On

My HTC One is currently unlocked at hboot 1.61, S-On, with ClockworkMod Recovery v6.0.4.6 installed. no carriers
I have a backup of the stock rom before I install any roms, and I have install SU to my device afterwards.
I was intended to install Insertcoin 7.1.3 rom, I did a factory reset/wipe caches and then install the rom via clockworkmod.
However, my device does not boot into the custom but reboot will automatically 'entering in recovery' instead,
perhaps that was to do with the S-On, or it's a failed rom I got?
Anyway, I tried to restore the stock rom backup I did, it said restore completed but it reboot into recovery still...
Now I can only able to access fastboot and recovery, I tried download and put in the by using "mounts and storage" -> "mount USB storage" on ClockworkMod, but it won't let me as it does not appear on my Windows 10 as it usually should.
Can anyone help me to solve this mystery? Ideally, I would like to get back to stock rom at least...
I only had experience on rooting from my Desire HD(retired), there's a sdcard to storage roms back then...
What I've got now is:
- a backup from clockworkmod, and I didn't copy to my PC
- a stock rom and kernel, I downloaded from internet and HTC webpage.
- a InsertCoin rom for m7
I have did some research on similar issue previously, but doesn't seems to help me out. if anyone knows the same issue has been addressed and solved in some posts, please don't hesitate to feed me with those posts, as I could have missed them by struggling on reading foreign language for the entire evening...
lastly, if i did anything idiotic through that process, please don't judge my stupidity
wailon93 said:
My HTC One is currently unlocked at hboot 1.61, S-On, with ClockworkMod Recovery v6.0.4.6 installed. no carriers
I have a backup of the stock rom before I install any roms, and I have install SU to my device afterwards.
I was intended to install Insertcoin 7.1.3 rom, I did a factory reset/wipe caches and then install the rom via clockworkmod.
However, my device does not boot into the custom but reboot will automatically 'entering in recovery' instead,
perhaps that was to do with the S-On, or it's a failed rom I got?
Anyway, I tried to restore the stock rom backup I did, it said restore completed but it reboot into recovery still...
Now I can only able to access fastboot and recovery, I tried download and put in the by using "mounts and storage" -> "mount USB storage" on ClockworkMod, but it won't let me as it does not appear on my Windows 10 as it usually should.
Can anyone help me to solve this mystery? Ideally, I would like to get back to stock rom at least...
I only had experience on rooting from my Desire HD(retired), there's a sdcard to storage roms back then...
What I've got now is:
- a backup from clockworkmod, and I didn't copy to my PC
- a stock rom and kernel, I downloaded from internet and HTC webpage.
- a InsertCoin rom for m7
I have did some research on similar issue previously, but doesn't seems to help me out. if anyone knows the same issue has been addressed and solved in some posts, please don't hesitate to feed me with those posts, as I could have missed them by struggling on reading foreign language for the entire evening...
lastly, if i did anything idiotic through that process, please don't judge my stupidity
Click to expand...
Click to collapse
Change your recovery to TWRP and flash away. If you read Insercoin thread, you would see that TWRP is recomended recovery. And that means you will loose your backup
donkeykong1 said:
Change your recovery to TWRP and flash away. If you read Insercoin thread, you would see that TWRP is recomended recovery. And that means you will loose your backup
Click to expand...
Click to collapse
Thanks for the reply, the backup is what holds me back from doing anything risky unless someone suggest me to do so, but I did risk of losing the backup and flashed TWRP. I have now successfully install InsertCoin rom, the sacrifice of the backup is well worthy. Well, at least my device can work properly, not much to lose. Doesn't seems like a big issue after all.
I also found out the problem was cause by the clockworkmod recovery. If I flashed TWRP in the first place, I could have kept a backup for my stock rom.
Anyway, a BIG thanks for your help! :good:
wailon93 said:
Thanks for the reply, the backup is what holds me back from doing anything risky unless someone suggest me to do so, but I did risk of losing the backup and flashed TWRP. I have now successfully install InsertCoin rom, the sacrifice of the backup is well worthy. Well, at least my device can work properly, not much to lose. Doesn't seems like a big issue after all.
I also found out the problem was cause by the clockworkmod recovery. If I flashed TWRP in the first place, I could have kept a backup for my stock rom.
Anyway, a BIG thanks for your help! :good:
Click to expand...
Click to collapse
You're dead right regarding recoveries! Now, all you need to do is make a backup of your ROM in TWRP for future mishaps and enjoy[emoji6]
And you're very welcome. I'm glad I could be of help

Categories

Resources