[Q] Fast charge ? - Sony Xperia ZR

what is the difference between normal charging and fast mode charging ?! and when use fast charge mode

Omarioo said:
what is the difference between normal charging and fast mode charging ?! and when use fast charge mode
Click to expand...
Click to collapse
AFAIK, fast charging is usually triggered by a slightly different wired USB cable which is normally used by standalone charger while a USB cable used by computer tells your phone to charge normally. Apart from the wiring, the kernel plays a role here too. Some kernel has tweaked to allow fast charging even for normal USB cable.

Related

Cannot charge with wall outlet

Recently my X1 cannot be charged with USB cable through wall outlet & even car charger , but able to charge with USB cable through PC.
Anyone do encounter the same problem?
Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.
paul c said:
Well that's a strange one - how long was it connected to the wall?
Without getting into the discussion about volts and amps provided, and amps drawn by the phone, any method should charge.
In terms of speed, I would think the wall would charge fastest (see above), and the USB slowest.
Did the phone show on the top bar, the charging icon when attached to the wall? Or after a period of time there was no increment in the % charge showing??
If the battery was down to 0%, you probably wouldn't see an immediate increase in the % charge. The % charge is orientative, especially at both ends of the scale.
Click to expand...
Click to collapse
I do agree with you. Charging with wall outlet is faster. Therefore, normally I'm charging my X1 with wall outlet, unless in office, will use PC USB.
Top bar never show charging icon, but once I charge it with PC USB, the charging icon show up immediately.
It seems like no power for the USB when connected to the wall outlet. I've tested with battery removed, plugged in USB cable connected to wall outlet, there is no charging illumination light. I cannot power on it.
I tried to recall, it happened after I used a USB charger for my MP3 player. The next day, when I tried to charge with car charger. To my surprise, the USB connection notification showed up (I do remember, while charging with wall outlet or car charger, it will never prompt me for USB connection).
I don't think, it is the ROM issue. Try a few ROM still having the same problem.
From now, I got to live with PC USB :|
X1 Charging problem
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse
let's me try with power off charging with wall outlet
well thats why se said USE only original accessories...you need to change the power ic on the board.
donottouch said:
well thats why se said USE only original accessories...you need to change the power ic on the board.
Click to expand...
Click to collapse
will the SE service centre entertain changing 'power ic'?
make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem
nguyennghiep said:
make sure your charger have an out put minimum is 1.Ah ,if lest than that it will not work , that is the troublem
Click to expand...
Click to collapse
I'm using the original SE charger!? I would not think the problem with the charger, but my X1 was screwed by the incompatible MP3 USB charger
Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
torquefever said:
I have same problem. I can not charge via both USB-PC and Wall. In order to charge the phone, I have to switch it off and then charge it.
This happened after I used CHEAP car charger from dealexteme.com
Now everytime I want to charge my phone, I have to switch it off.
Click to expand...
Click to collapse
digitalspree said:
Yep same with me, not sure why mine started doing that though, I never got used a cheap charger. Maybe its the rom... I am trying a new one now.
Click to expand...
Click to collapse
it's not caused by the ROM, I'm very sure. I've installed different ROM. The problem still exist.
I am having a similar problem. When the phone completely discharges , i am unable to charge it with any power adapter or even car charger. I have to initially charge the phone using a PC , then after the power is around 15% , then the phone gets charged with a normal adapter.. any suggestions??
same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally
I had a similar problem twice.Both times I solved it by replacing the charger.
the same happen to me and i have another issue
my xperia doesnt work as usb mass storage!!!
the solution was buying another charger but..the usb mass storage issue still not working as a flash drive!!
luirhy said:
same problem. It happends when the battery is completely discharged.
what I do is use a charger w/ low amp rating (.1) and plug it in for at least 10-20min. Give it some time, it will start charging after a while (indicated by the blinking lights). After that, you can turn it on and charge it normally
Click to expand...
Click to collapse
It works with Z1 too. Thanks a lot!
I guess something goes wrong with battery controller

[Q] Can nook color plug adapter all time ?

Laptop have smart battery manager to change a/c (when plug in power) and battery when haven't power, so haven't been charged and discharged => not low level . But have nook color smart battery manager ?
Nook color can use 8 hours , if i use more, I will charge it twice a day , I want plug it in power when I am at home
If you use the supplied cable and charger, it will allow fast charging and then automatically stop charging when it is full so you won't damage the battery.
If you use a different charger or cable, it will charge much slower.
Mine won't charge with another cable and plug besides the one it came with. Phone can't charge with NC plug and cable. Is it supposed to to be able to charge with a lower power adapter like the one for my phone?
boborone said:
Mine won't charge with another cable and plug besides the one it came with. Phone can't charge with NC plug and cable. It is supposed to to be able to charge with a lower power adapter like the one for my phone?
Click to expand...
Click to collapse
Apparently you have to shut the Nook down for it to charge with a regular USB cable. That's because a regular cable won't supply enough power to charge the device while it is running.The fact that it will charge at all under these circumstances is an unadvertised feature.
more information
Shadowise said:
If you use the supplied cable and charger, it will allow fast charging and then automatically stop charging when it is full so you won't damage the battery.
If you use a different charger or cable, it will charge much slower.
Click to expand...
Click to collapse
But I can't find this information barnesandnoble.com. Can you give some link about this ?
tienlbhoc said:
But I can't find this information barnesandnoble.com. Can you give some link about this ?
Click to expand...
Click to collapse
The supplied charger is 1.9 amp. A regular charger is 1 amp. A phone car charger is. 5 amp. That's why if you use the NC charger it's faster.
Shadowise said:
If ... stop charging when it is full so you won't damage the battery. ...
Click to expand...
Click to collapse
I want this information in barnesandnoble.com , not fast or slow
the book that comes with the nook states that when the light turns green that it is fully charged and now supplying power to the nook and not the battery (so your battery does not discharge and you can use your nook still), i'm not sure how much more proof you want than this.
As for other chargers, if you get the micro USB Type B (I believe is what it's called), it will charge fast still and SHOULD have auto shut off (since that's built into the nook).

USB fast charging (kernel)

Some kernels come with USB fast charging as an option that you can toggle. If you use this, does it shorten the battery health long-term ? I'm not referring to turbo chargers (aftermarket), this is just the kernel setting. I recall reading this awhile ago, but I was curious myself.
mikeprius said:
Some kernels come with USB fast charging as an option that you can toggle. If you use this, does it shorten the battery health long-term ? I'm not referring to turbo chargers (aftermarket), this is just the kernel setting. I recall reading this awhile ago, but I was curious myself.
Click to expand...
Click to collapse
all it does is increase the voltage coming in when charging via a USB. USB charging voltage is about a quarter/third that of a wall charger. no, no negative affects.
Not at all, even with USB fast charge on it will draw less power than if it were plugged in a regular wall charger or the turbo charger. There's an app called Ampere you can use to monitor how much power the phone draws while charging (or even discharging) you can use it to see the differences between regular usb, fast charge usb, turbo charge, etc.
Ok, that's good to know. Now I can re-toggle the feature and not worry.:good:
What about if it is toggled on and you put it on a regular charger ? Is it still fine ?
mikeprius said:
What about if it is toggled on and you put it on a regular charger ? Is it still fine ?
Click to expand...
Click to collapse
if its on and you charge it in a wall outlet, nothing will happen. it will only work on a real USB connection.
Motorola put in support for the Qualcomm rapid charge in the nexus 6.
Read up:
https://www.qualcomm.com/products/snapdragon/quick-charge
It allows the battery to charge at a higher voltage with USB connections and Qualcomm certified rapid chargers AND a compatible cable. The nexus 6 can still recharge with standard chargers and cables, just at a slower rate regardless of kernel support.
To answer the damage questions: Moto says no damage to the battery as long as certified chargers are used.
Can't you use any standard usb charging cable? (Assuming it's not really long or poor quality)

Charging Issue: Charging Slowly from USB, Charging Normal from Wireless Qi

Hi everyone, so my issue I currently have with my Nexus 6 is as follows:
Device Details: Nexus 6, rooted, running CM13, Xposed Framework installed
Charging from USB: shows "charging slowly" message on lockscreen. Ampere shows an average of about 200mA, regardless of type of charger. Tried several QuickCharger adapters and a regular adapter, as well as several different cables to the same result. When connecting to a PC via USB, it shows the same charging power, however my laptop is not recognizing that the device has been plugged in.
Charging Wirelessly: charges normal as it always had, showing a average of about 500-700mA.
The issue occurred suddenly while I was out hiking and attempting to charge via a QuickCharge capable portable battery. The previous day it was charging as it always has.
All signs point to a damaged micro USB port on my Nexus 6, but wondering if there could be any other possible causes. I'm hesitant to try a factory reset to troubleshoot it as a software issue since I have no way of connecting it to my PC to re-root and re-flash CM if that doesn't fix the issue.
If it is the micro USB port as I think, any suggestions on how to remedy this? I'm used to using my device heavily everyday and charging it with a QuickCharger as needed, so this slow charging is a significant issue right now.
Thanks for any help!
your phone charges at differing speeds at differing parts of its charging cycle. and on top of that, charging via usb instead of wall charger will carge your phone at a much slower rate. that said, we also have a "usb fastcharge" option included in many kernels/custom roms. but you also have to know that fastcharge doesnt work with every usb port that you can plug into. it only will work with certain usb ports.
simms22 said:
your phone charges at differing speeds at differing parts of its charging cycle. and on top of that, charging via usb instead of wall charger will carge your phone at a much slower rate. that said, we also have a "usb fastcharge" option included in many kernels/custom roms. but you also have to know that fastcharge doesnt work with every usb port that you can plug into. it only will work with certain usb ports.
Click to expand...
Click to collapse
Sorry, I should have been more clear. When I said "Charging via USB" I just mean through the phone's microUSB port. Regardless of whether it was plugged into a wall charger(with or without QuickCharge 2.0) or my laptop or a portable battery, or a QuickCharge car charger, I was getting the same charge rate and message showing "charging slowly", much slower than wireless charge rate which showed the normal "charging" message. The Qualcomm QuickCharge 2.0 using the provided Motorola Supercharger or my QuickCharge 2.0 capable portable battery has always worked great prior to this issue.
mrkb510 said:
Sorry, I should have been more clear. When I said "Charging via USB" I just mean through the phone's microUSB port. Regardless of whether it was plugged into a wall charger(with or without QuickCharge 2.0) or my laptop or a portable battery, or a QuickCharge car charger, I was getting the same charge rate and message showing "charging slowly", much slower than wireless charge rate which showed the normal "charging" message. The Qualcomm QuickCharge 2.0 using the provided Motorola Supercharger or my QuickCharge 2.0 capable portable battery has always worked great prior to this issue.
Click to expand...
Click to collapse
ok, because the included "fastcharge" is only for usb charging. but regular charging still depends on where in the charging cycle you were. for example, at 92 itll charge at a much slower rate than at 50. what battery percent where you at when you noticed?
simms22 said:
ok, because the included "fastcharge" is only for usb charging. but regular charging still depends on where in the charging cycle you were. for example, at 92 itll charge at a much slower rate than at 50. what battery percent where you at when you noticed?
Click to expand...
Click to collapse
Initially very low, under 15%. Was attempting to charge with a QC2.0 portable battery, but the device was draining quicker than it was charging. When I got home, I attempted the Motorola "Turbocharger" wall charger and got the same rate. So I put it on the wireless charger, and as it charged, I kept testing the wall charger every 20% or so, getting the same slow charge rate.
The bottom line is really that the Wireless Qi charging is functioning properly as it always has, but any "plugged-in" type charging is charging at an extremely slow rate, no matter what type of charger, no matter what % the battery is at.
mrkb510 said:
Initially very low, under 15%. Was attempting to charge with a QC2.0 portable battery, but the device was draining quicker than it was charging. When I got home, I attempted the Motorola "Turbocharger" wall charger and got the same rate. So I put it on the wireless charger, and as it charged, I kept testing the wall charger every 20% or so, getting the same slow charge rate.
Click to expand...
Click to collapse
odd! it could be a software issue or just a derp. have you tried rebooting? im one of the few that i know with a broken usb on my n6. and it charges slower. it used to charge at about 2400mV, now it charges at 800mV max. now that its completely broken, i cant charge it via a usb anymore, now i charge it wirelessly, which is at about 800mV max as well. anyways, try a reboot, or reflashing your software first, before doing anything extreme.
simms22 said:
odd! it could be a software issue or just a derp. have you tried rebooting? im one of the few that i know with a broken usb on my n6. and it charges slower. it used to charge at about 2400mV, now it charges at 800mV max. now that its completely broken, i cant charge it via a usb anymore, now i charge it wirelessly, which is at about 800mV max as well. anyways, try a reboot, or reflashing your software first, before doing anything extreme.
Click to expand...
Click to collapse
Yea I've tried rebooting like 20 times lol. Also tried doing a CM nightly software update. I'll see if reflashing will do the trick. Any suggestion on reflashing from the device? I've always used Nexus Root Toolkit and did it from my PC.
If that doesn't work, guess I'm stuck with wireless charging too. Thanks for your help!
mrkb510 said:
Yea I've tried rebooting like 20 times lol. Also tried doing a CM nightly software update. I'll see if reflashing will do the trick. Any suggestion on reflashing from the device? I've always used Nexus Root Toolkit and did it from my PC.
If that doesn't work, guess I'm stuck with wireless charging too. Thanks for your help!
Click to expand...
Click to collapse
you can flash cm via twrp recovery on your phone, without a computer. oh, and my work buddies are still in shock that my n6 wirelessly charges.. they both have iphone 6s

Weird issue of charging

When i put the mobile on charging with original adapter and cable ,it just shows cable charging , then i take out the ejector pin and insert it into the charging port just for a second or two and then when i insert the cable, it starts fast charging
With the PD charger its fast charging is always ok
I just wanted to ask that if anyone else is facing this issue or just me
suhaibahmad said:
When i put the mobile on charging with original adapter and cable ,it just shows cable charging , then i take out the ejector pin and insert it into the charging port just for a second or two and then when i insert the cable, it starts fast charging
With the PD charger its fast charging is always ok
I just wanted to ask that if anyone else is facing this issue or just me
Click to expand...
Click to collapse
I have the same problem. I think it's cable related. When I reverse the part of the cable going into my phone, that sometimes resolves the problem as well. Also if you unplug the cable usb from the outlet charger then replace it immediately. It's not your phone, it's the cable.
well stat with basic, clean charging port and cable jack as well which goes in charging port.
suhaibahmad said:
fast charging is always ok
Click to expand...
Click to collapse
if you planning to upgrade your phone year or two, then yeah fast charging is fine! But please note battery does get destoryed quicker with fast charge! if your after longevity of your battery then stick to slow charge, speed and heat kill battery faster!

Categories

Resources