Hi all
I have a new Kindle Fire HD 7". According to 'About' it's version is 7.3.1. The model number on the back is X43Z60
I've read just about every thread in this forum about rooting, flashing recoveries, using adb, fastboot etc etc.. I even made my own factory cable. I have been successful in rooting the device, I can access it via adb with no issues and I have even managed to install SafeStrap on it (though no ROM's will install) but I can NOT get it to boot into fastboot mode. I have successfully written to the idme bootmode 4002 and rebooted it but it has no effect. Windows does not detect any device other than the adb interface at any point. I even tried this while booted into safestrap and it too had no effect.
I'd like to know if anyone is able to say definitively what it is I need to do to get a custom ROM working. It doesn't help either that people seem to refer to the devices they have written their software for simply as "Kindle fire HD 7" with no mention of version, etc. meaning I have little indication as to the suitability of the instructions.
I saw mention of a 'short' mod where I am able to take the cover off and short a particular exposed connector to the frame and enable fastboot mode, but couldn't actually find any further information. Not afraid to give it a go but I need to know what to do.
Any help is appreciated
Thanks
A fast boot cable just puts five volts on pin 4 on the micro usb...that's the short mod....you short the five volt pin 1 to pin 4...note this has to be on the micro usb side you will blow up your usb port if you do it on the usb end
Safe strap is not the route you want to take I would at this point restore back to stock and install twrp as your second boot loader then installing a Rom should be simple
Sent from my GT-P3110 using xda app-developers app
TimTams said:
Hi all
I have a new Kindle Fire HD 7". According to 'About' it's version is 7.3.1. The model number on the back is X43Z60
I've read just about every thread in this forum about rooting, flashing recoveries, using adb, fastboot etc etc.. I even made my own factory cable. I have been successful in rooting the device, I can access it via adb with no issues and I have even managed to install SafeStrap on it (though no ROM's will install) but I can NOT get it to boot into fastboot mode. I have successfully written to the idme bootmode 4002 and rebooted it but it has no effect. Windows does not detect any device other than the adb interface at any point. I even tried this while booted into safestrap and it too had no effect.
I'd like to know if anyone is able to say definitively what it is I need to do to get a custom ROM working. It doesn't help either that people seem to refer to the devices they have written their software for simply as "Kindle fire HD 7" with no mention of version, etc. meaning I have little indication as to the suitability of the instructions.
I saw mention of a 'short' mod where I am able to take the cover off and short a particular exposed connector to the frame and enable fastboot mode, but couldn't actually find any further information. Not afraid to give it a go but I need to know what to do.
Any help is appreciated
Thanks
Click to expand...
Click to collapse
Visit the thread in my signature for the Kindle Fire HD 7". I addressed the issue of Amazon OS 7.3.1 with Step 1: Rooting.
Thanks for the info about the cable, ended up not needing it
seokhun said:
Visit the thread in my signature for the Kindle Fire HD 7". I addressed the issue of Amazon OS 7.3.1 with Step 1: Rooting.
Click to expand...
Click to collapse
Thanks!! I must have overlooked your guide, the titles of a few threads are very similar
Yours is the only one that didn't require the use of fastboot to get TWRP on the device, it worked flawlessly!
Cheers
One very happy TimTams :laugh:
Hey, I recently rooted my Kindle Fire HD and everything was working great, until I installed an Xposed tweak that caused my Kindle to start boot looping and then thereafter I went ahead and screwed it up even worse - by messing with various fastboot methods to get it working again. Yeah... I should have just left it as it was, I know...
I've read about how there are signature checks whenever the Kindle boots up which I'm assuming I don't have anymore. So, I'm curious if there is anyway to come back from this? From what I've read, if I had backed up the partitions, technically I should have been able to restore them - but unfortunately here we are.
I've also downloaded the latest update from Amazon 'update-kindle-11.3.1.0_user_310084920' and after converting it to a zip file, there is a 'boot.img' and a 'recovery.img' which I would assume would have the signatures already within them, but no system.img. Is there anyway for someone to create an exact backup of that file, or is that not possible right now without a second bootloader?
I'm honestly really unsure of what to do here, I've tried a myriad of different approaches and still it looks like this is a bad brick... However I do hope someone out there has a solution, I'd love to get this device working again.
Oh and what happens whenever I start it up, is that I just get the Amazon Kindle Fire Logo (Pure White), without any changes. It doesn't turn gold with the animation or anything.
Hyperiunn said:
Hey, I recently rooted my Kindle Fire HD and everything was working great, until I installed an Xposed tweak that caused my Kindle to start boot looping and then thereafter I went ahead and screwed it up even worse - by messing with various fastboot methods to get it working again. Yeah... I should have just left it as it was, I know...
I've read about how there are signature checks whenever the Kindle boots up which I'm assuming I don't have anymore. So, I'm curious if there is anyway to come back from this? From what I've read, if I had backed up the partitions, technically I should have been able to restore them - but unfortunately here we are.
I've also downloaded the latest update from Amazon 'update-kindle-11.3.1.0_user_310084920' and after converting it to a zip file, there is a 'boot.img' and a 'recovery.img' which I would assume would have the signatures already within them, but no system.img. Is there anyway for someone to create an exact backup of that file, or is that not possible right now without a second bootloader?
I'm honestly really unsure of what to do here, I've tried a myriad of different approaches and still it looks like this is a bad brick... However I do hope someone out there has a solution, I'd love to get this device working again.
Oh and what happens whenever I start it up, is that I just get the Amazon Kindle Fire Logo (Pure White), without any changes. It doesn't turn gold with the animation or anything.
Click to expand...
Click to collapse
The 2013 Kindle Fire HD is not setup for Xposed yet. There is no bootloader access yet therefore there is no way to recover yet. You have two options at this point. Wait until there is a bootloader exploit or contact Amazon for an exchange.
The only things available are root, remove OTA updates and remove lock screen ads. Even Google Play is only for window shopping at the moment.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
LinearEquation said:
The 2013 Kindle Fire HD is not setup for Xposed yet. There is no bootloader access yet therefore there is no way to recover yet. You have two options at this point. Wait until there is a bootloader exploit or contact Amazon for an exchange.
The only things available are root, remove OTA updates and remove lock screen ads. Even Google Play is only for window shopping at the moment.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
For anyone wondering, xposed actually works perfectly with a good number of modules, but don't install Xthemeengine, that'll cause the bootloop.
Fastboot
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Gamingmayr said:
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Click to expand...
Click to collapse
Nah nothing so far for the 2013 unfortunately. I don't think there's been much interest in this model as of yet.
Hyperiunn said:
Nah nothing so far for the 2013 unfortunately. I don't think there's been much interest in this model as of yet.
Click to expand...
Click to collapse
I've been interested. Unfortunately, my mother won't let me touch her new 2013 Fire HD. Still, if you can find someone who's rooted and not bricked, maybe they could backup their boot, system, and recovery .imgs for you and post them for you. And since they're already rooted, you would be too (someone correct me if I'm wrong). If I could get a temporary root or find a way to remove root later I would back them up for you.
The system restore tool for the 2012 Fire HD flashes the boot, recovery, and system partitions. Theoretically, the same tool would work, but only if you replaced the .img files with the ones for the 2013 Fire HD.
Gamingmayr said:
As long as you can boot into fastboot-mode nothing is lost. (if you can't -> buy a fastboot-cable. it is much cheaper than a new Kindle. They cost about 15$).
I used this useful tool. It just flashes the old system, boot and recovery on your Kindle. (all files are included in the downloadable zip file).
This tool was very useful for me and saved my Kindle very often (I am a real flashoholic...). Maybe there is something like this for the new 2013 KFHD too?
Click to expand...
Click to collapse
There is no confirmation that a fastboot cord even works with the 2013 model nor are the stock images available yet. The 2012 KFHD and the 2013 KFHD do not use the same images.
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
Hyperiunn said:
For anyone wondering, xposed actually works perfectly with a good number of modules, but don't install Xthemeengine, that'll cause the bootloop.
Click to expand...
Click to collapse
It won't work on the 2013 Kindle fire HD yet though. Since that is the topic here I guess that narrows it down to this tablet not all the others don't it.
Fastboot cable works just fine with the one I have.
hi guys, I live in Cuba and just received a kindle fire HD 2013 as a gift. Access to information about the kindle is very difficult here. could anyone please tell me if there is anyway to root the device and install android 4.2.2? What little number of posts I have managed to open tell me it's not possible yet. is this true? any help would be appreciated. thanks!
Root is possible, flashing other ROMs is not. http://forum.xda-developers.com/showthread.php?t=2544736
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
Root is possible, flashing other ROMs is not. http://forum.xda-developers.com/showthread.php?t=2544736
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Hi.
I've followed this method down to the letter and still no root. Any ideas?
I test it by trying to edit the hosts file to prevent auto updating to no avail. I've also tried some other root functions in ES File Explorer and they have not worked.
Also, in your opinion will flashing other ROMs be possible in the future or is it unlikely? I'm just wondering whether I should check back every so often or should I not bother?
Thanks,
K
I seriously doubt we are going to unlock the bootloader, it just doesn't seek worth it on this particular device because we have 3 or 4 other model kindles already available to flash and they technically have better features on them like HDMI and a camera, so I would think someone would be more intersected in the HDX's if anything, and who knows an exploit on them might work with the bootloader on the 2013, but no guarantees on that as the CPU and hardware is different so I'm assuming the bootloader quite different.
As to your problem with rooting, give me some feedback or a log of the terminal output so I have an idea of what happened, I don't have a 2013 model so I have never attempted its rooting process, but I can probably help with errors. Oh and for the record, on a command print you can right click in the window, hit mark, highlight as much of the text as you want, hit enter and it copies it to the clipboard so you can paste it into code brackets here. Most people don't see. To know this for some reason and just screenshot the command prompt... Seems kinda basic that any windows app has basic copy and paste functionality in it. Lemme end this post before I start ranting about how Linux has even better copy and paste support.
Sent from my Amazon Kindle Fire HD using Tapatalk
hi
hey, did you root your kindle? if you do , please let me know
I had rooted my Kindle Fire HD and working perfectly with Go Launcher.
By mistake , I Factory Reset the Kindle in the Settings Menu. The Kindle erased all the Data and Apps ( Not a problem for me) and rebooted.
It now starts up on the Lock Screen ( as before) but I am not able to swipe the lock and open the screen. Tried powering on several times , but no luck.
Please Help !!
One more info...
Just to add that when I connect the Kindle with the USB cable to my PC (Win 7) , the Kindle is recognized and I can see the folders/files in Windows Explorer.
Do you have adb access?
Sent from my Amazon Tate using Tapatalk
stunts513 said:
Do you have adb access?
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Yes. Just downloaded it. But I am a Noob .
when I run adb devices at the command prompt , no devices show up under "List of Devices Attached"
Do note that I am not able to access Settings to turn ADB On
OK then you don't have adb access. You are stuck with one option, use a fastboot cable to restore the system partition. Kindle fire first aid or SRT should do the trick. If you don't have a fastboot cable I recommend the team blackhat ones, they are a known place to get them that are confirmed working. There's a link to them in hashcode's 2nd bootloader + twrp tutorial thread.
This is the 2012 kfhd with the camera correct?
Sent from my Amazon Tate using Tapatalk
MY Kindle Remains Locked ....
stunts513 said:
OK then you don't have adb access. You are stuck with one option, use a fastboot cable to restore the system partition. Kindle fire first aid or SRT should do the trick. If you don't have a fastboot cable I recommend the team blackhat ones, they are a known place to get them that are confirmed working. There's a link to them in hashcode's 2nd bootloader + twrp tutorial thread.
This is the 2012 kfhd with the camera correct?
Sent from my Amazon Tate using Tapatalk[/QUOT
Many Thanks for all the help. I am in Bangalore , India and am not able to get a fastboot cable. I will be visiting the US for about 10 days from the 1st of August. Can you guide me as to where I could send the Kindle for repair so that I get it back in about 10 Days. I shall send it from a US address (Denver) and would like it to be returned to the same address (Denver). Could it be rooted to 4.2 or 4.4 ? What would it cost ?
Appreciate all your help , once again .
Click to expand...
Click to collapse
I have no idea where you could send it to get it done, I would offer my services personally but unfortunately I just got a job and am very busy and I lack a fastboot cable/adapter. I think prokennexusa might but Idk. You can run the latest kitkat based android on the device once a ROM is flashed on it. Maybe you can get a fastboot adapter while in the USA? They are a good idea to have in case you brick it again. I'm a bit of a hypocrite for saying that as in don't have one, but I figured if the time comes I can solder one together out of a spare cable or buy one if none of my cables have the pin I would have to solder.
Sent from my Amazon Tate using Tapatalk
You can send it to me. I'll do it up for you. You can get Fastboot cord for cheap on eBay too. They are nothing more than a stock Motorola cord. If you have one of those that would work too.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.3 using XDA premium 4 mobile app
Hi there,
Firstly I apologise, this post may be a little vague, as am having trouble getting the truth out of my son. I was wondering if anyone might be able to help me identify what the heck he has done to his Kindle Fire HD 7"
When you turn the device on, despite initially saying Kindle fire HD, this text is soon replaced with a boot screen animation that simply reads "DROID".
When you begin to use the Kindle there is a small carousel of apps over the larger carousel. Also when you rotate the screen to landscape it doesn't seem to reorientate the display and only shows the top half of the screen. It also seems to crash and won't come out of the lock screen.
I am guessing he has tried to either root it or flash a custom rom, he says he installed an app called root master? But cannot see how an app would grant root access?
We bought this for him as a Christmas present, and whilst am sorely tempted to tell him "tough" as he's obviously tried to do something without fully understanding what he's doing, I would like to be able to sort this as soon as I stop being cross.
So whilst I appreciate this is all a bit vague, does anyone recognise any symptoms, and have any insight into what he might have done and/or installed and is there any sure fire method to get this back for him?
A couple of questions:
-> Is it the 2012 version with the camera and HDMI output, or is it the 2013 version that has neither of these?
-> Can you access the settings and enable ADB?
-> Can you solder or are willing to shell out $10-$15 to fix this?
>>>Sent from my homebuilt TARDIS running Android 4.4... or maybe it's a Kindle Fire HD running Cyanogenmod 11<<<
hi there,
Thanks for the reply.
We got it for him for Christmas 2012.
Can get to settings. I have enabled ADB (just to see if I could, and I can).
Does this mean I might not need a soldering iron?
Do not claim to be any sort of expert, so please assume no knowledge here.
But will carefully follow instructions if there are any.
Am hoping to be able to hand him back a working device when he's learnt his lesson.
Thanks again
I would suggest you to use the Kindle Fire First Aid if fastboot works. That way you can go totally stock. And a few more questions:
Do you have the Android SDK installed on your PC? If yes,try using "adb devices" to see if it recognizes the Kindle
Shut down the Kindle. Boot it up. Do you see an orange Kindle animation only or a blue animation?
I suggest you buy a factory adapter from Team BlackHat here if fastboot doesn't work.
PS: Don't be too cross on him. It's perfectly understandable if he wanted to flash a custom ROM. I ended up hating Amazon after realizing what they did to Android....
SafinWasi said:
I would suggest you to use the Kindle Fire First Aid if fastboot works. That way you can go totally stock.
Click to expand...
Click to collapse
Is this what is being described here?
http://forum.xda-developers.com/showthread.php?t=2096888
If so, I will have a look this evening..
I like the fact that it has "noob" in the post description.
Although I flashed a custom rom onto my Samsung Galaxy S2 a couple of years back (using ODIN) a lot of the instructions in this Kindle Fire section seem to be very confusing. I wish I'd known he was planning to do something like this, as I'd have read up on it for him (and, most likely warned him off, amazon look like they have locked down this tablet to a horrific degree)
SafinWasi said:
And a few more questions:
Do you have the Android SDK installed on your PC? If yes,try using "adb devices" to see if it recognizes the Kindle
Click to expand...
Click to collapse
Okay, that sounds a good first place to start. I don't think I have the SDK currently installed but I guess I can grab it again from google.
I take it if the SDK can "see" it we're halfway there?
Just to clarify:
The device is "quite" responsive.
It will boot up (although I cannot find anything on the internet about this boot animation that just draws the word "DROID" - if I could, I might be able to figure what he's tried to do at least) and you can sort of use it (although there are onscreen glitches as described above) and it freezes up when the screen locks (so you have to reboot every time it locks the screen). But, at least it's not totally D.O.A, I guess.
SafinWasi said:
[*]Shut down the Kindle. Boot it up. Do you see an orange Kindle animation only or a blue animation?
Click to expand...
Click to collapse
It does initially flash up Kindle..
I thought I had solved the problem with a factory reset last night (I'll admit for a second I cheered), but after initially showing Kindle Fire, it then starts going to this blue DROID animation..
SafinWasi said:
I suggest you buy a factory adapter from Team BlackHat here if fastboot doesn't work.
Click to expand...
Click to collapse
Okay, cool I take it this is step three if the Kindle Fire First Aid doesn't work?
SafinWasi said:
PS: Don't be too cross on him. It's perfectly understandable if he wanted to flash a custom ROM. I ended up hating Amazon after realizing what they did to Android....
Click to expand...
Click to collapse
I am a lot calmer today, am sorry that the first post was written in "Angry Dad" mode
I was just annoyed that he tried to deny doing anything to his device, and claimed it was "just an amazon update" (when it was obvious it wasn't).
This is why I am hoping to fix it for him, it was a Christmas present after all, and I would like to (eventually, not right away) hand him back a working Kindle device.
I just wish I wasn't flying so blind.
Thing is I'm not 100% sure he know's what he's done, I think he's just blindly followed a YouTube video or similar and he's ended up with this.
I really, really appreciate you guys taking the time to reply to my post.
Thanks so much for reading and responding.
silentbazz said:
Is this what is being described here?
http://forum.xda-developers.com/showthread.php?t=2096888
If so, I will have a look this evening..
I like the fact that it has "noob" in the post description.
Although I flashed a custom rom onto my Samsung Galaxy S2 a couple of years back (using ODIN) a lot of the instructions in this Kindle Fire section seem to be very confusing. I wish I'd known he was planning to do something like this, as I'd have read up on it for him (and, most likely warned him off, amazon look like they have locked down this tablet to a horrific degree)
Okay, that sounds a good first place to start. I don't think I have the SDK currently installed but I guess I can grab it again from google.
I take it if the SDK can "see" it we're halfway there?
Just to clarify:
The device is "quite" responsive.
It will boot up (although I cannot find anything on the internet about this boot animation that just draws the word "DROID" - if I could, I might be able to figure what he's tried to do at least) and you can sort of use it (although there are onscreen glitches as described above) and it freezes up when the screen locks (so you have to reboot every time it locks the screen). But, at least it's not totally D.O.A, I guess.
It does initially flash up Kindle..
I thought I had solved the problem with a factory reset last night (I'll admit for a second I cheered), but after initially showing Kindle Fire, it then starts going to this blue DROID animation..
Okay, cool I take it this is step three if the Kindle Fire First Aid doesn't work?
I am a lot calmer today, am sorry that the first post was written in "Angry Dad" mode
I was just annoyed that he tried to deny doing anything to his device, and claimed it was "just an amazon update" (when it was obvious it wasn't).
This is why I am hoping to fix it for him, it was a Christmas present after all, and I would like to (eventually, not right away) hand him back a working Kindle device.
I just wish I wasn't flying so blind.
Thing is I'm not 100% sure he know's what he's done, I think he's just blindly followed a YouTube video or similar and he's ended up with this.
I really, really appreciate you guys taking the time to reply to my post.
Thanks so much for reading and responding.
Click to expand...
Click to collapse
Okay,I'll guide you through a step-by-step tutorial to restore your Kindle.
Download and install the Android SDK. That is the first thing any Android modding guy must have. It provides you with the ADB and Fastboot executables which you're gonna need.
Download and install the Kindle Fire HD ADB drivers. You're gonna need them since the official Google drivers that came with the SDK are not supported by Amazon.
Modify your path variable. To do this,right-click on 'My Computer' and select properties. Click on "Advanced System Settings" and then "Environment Variables". At this point,you should copy the path to the tools and platform-tools folders of your SDK and paste them in the "path" system variable . If you want a video tutorial:http://www.youtube.com/watch?v=oaNM-lt_aHw
See if ADB and fastboot works. Open CMD from Run and type in ADB or fastboot. If it returns a lot of text,it's working.
Now type in:
Code:
fastboot -i 0x1949 getvar product
It'll return <waiting for device>
Turn off the Kindle and plug it in. If it boots into fastboot,you're good to go with KFFA
If it doesn't boot into fastboot,you'll have to buy a fastboot adapter or make one.
---------- Post added at 06:53 AM ---------- Previous post was at 06:51 AM ----------
Although I have no idea how he got the Droid animation....
SafinWasi said:
Although I have no idea how he got the Droid animation....
Click to expand...
Click to collapse
Okay, apparently, he went to this 1mobile market to get a one click root app.
I have not been able to find the app myself, but am very worried that he's been downloading apps from an unofficial app store.
The change to the boot animation seems to have been achieved using a Xposed app (that requires XBlast?). It was after installing this, and changing the boot animation that he says the Kindle started to behave weirdly.
Have not had the time yet to sit down and go through the instructions provided, thank you for those, I will set time aside at the weekend as I don't want to rush it.
At least now I know where the weird boot animation came from
I provide this info as a warning to others.
silentbazz said:
Okay, apparently, he went to this 1mobile market to get a one click root app.
I have not been able to find the app myself, but am very worried that he's been downloading apps from an unofficial app store.
The change to the boot animation seems to have been achieved using a Xposed app (that requires XBlast?). It was after installing this, and changing the boot animation that he says the Kindle started to behave weirdly.
Have not had the time yet to sit down and go through the instructions provided, thank you for those, I will set time aside at the weekend as I don't want to rush it.
At least now I know where the weird boot animation came from
I provide this info as a warning to others.
Click to expand...
Click to collapse
1mobile is an OK place to download apps from. You just have to make sure the dev is reputable. XBlast can mess a tablet up if you play to much with it.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
I agree. It's tricky,XBlast. Any progress?
Sent from my device running CyanogenMod 11
SafinWasi said:
I agree. It's tricky,XBlast. Any progress?
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
Alas, not good..
Am stumbling at the first hurdle really, have installed the AndroidSDK all okay but am trying to add the Kindle Fire drivers into the SDK as per amazon's instructions here .
But the SDK they describe doesn't seem to match the SDK environment I have installed (I have version 23.0.0.1245622 of eclipse installed, which seems to have a different menu structure to the one amazon describe?) and whenever I try and get
Eclipse to access the URL amazon has told me to (http://kindle-sdk.s3.amazonaws.com/addon.xml) I get the message "No repository found at http://kindle-sdk.s3.amazonaws.com/addon.xml"
Am really not sure what I'm doing wrong..
silentbazz said:
Alas, not good..
Am stumbling at the first hurdle really, have installed the AndroidSDK all okay but am trying to add the Kindle Fire drivers into the SDK as per amazon's instructions here .
But the SDK they describe doesn't seem to match the SDK environment I have installed (I have version 23.0.0.1245622 of eclipse installed, which seems to have a different menu structure to the one amazon describe?) and whenever I try and get
Eclipse to access the URL amazon has told me to (http://kindle-sdk.s3.amazonaws.com/addon.xml) I get the message "No repository found at http://kindle-sdk.s3.amazonaws.com/addon.xml"
Am really not sure what I'm doing wrong..
Click to expand...
Click to collapse
Don't do that. Just download my Flasher and extract it. There is another zip inside,which has the drivers. Just install them normally.
Sent from my device running CyanogenMod 11
silentbazz said:
Alas, not good..
Am stumbling at the first hurdle really, have installed the AndroidSDK all okay but am trying to add the Kindle Fire drivers into the SDK as per amazon's instructions here .
But the SDK they describe doesn't seem to match the SDK environment I have installed (I have version 23.0.0.1245622 of eclipse installed, which seems to have a different menu structure to the one amazon describe?) and whenever I try and get
Eclipse to access the URL amazon has told me to (http://kindle-sdk.s3.amazonaws.com/addon.xml) I get the message "No repository found at http://kindle-sdk.s3.amazonaws.com/addon.xml"
Am really not sure what I'm doing wrong..
Click to expand...
Click to collapse
Hi! One click root app was probably called VROOT. VROOT is still not identified as safe as there may be malware, sorry :\ However if you have a FASTBOOT cable go on this website and you should be able to restore it without SDK.
http://androidcowboy.com/2013/07/how-to-recover-bricked-kindle-fire-hd/
by the way once choosing an "option" please wait for at least 20 minutes as restoring the device takes a long process.
silentbazz said:
Am really not sure what I'm doing wrong..
Click to expand...
Click to collapse
Your tablet still has fastboot access which means it's almost surely restorable. The flasher offered above will work and so will the System Restore Tool. You just run the bat and wait to be restored. Make sure your drivers are installed properly. Windows 8/7 64bit need to be put in test mode so your drivers will install right.
Windows is not going to let you do this until you disable device driver signature enforcement.
Disable device driver signature enforcement in Windows 7 read on. Windows 8 has different steps.
Both must be done from the administrator profile to work right
Both of these are for Windows 7 X64 users.
Windows 7 X32 and earlier version users do not have this issue
A.*
1. Reboot and on start up press F8 a couple times.
2. Scroll down to "Disable Driver Signature Enforcement."*
Note: This must be done on every bootup you want to install something not MS signed.*
B. For a more permanent solution.*
1. First go and uninstall the driver (delete driver) you want to replace and then restart your computer.*
2. Now go to the start menu and type cmd.
3. Right click on "cmd" and open a command prompt with elevated privileges (run as administrator.)
4. Now type these in the command prompt one at a time hitting enter after each one.
bcdedit.exe -set TESTSIGNING ON
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
4. Now install the driver you want.
5. Restart the computer.
6. Profit.
Note: If you do this right, you will see "Test Mode Windows 7 Build 7601" (or something comparable) in the lower right corner of your screen. This means that drivers not signed by MS can be installed without getting the Windows has installed the best driver already bit.*
If you opt to take your computer out of test mode, the drivers will more than likely be replaced by MS drivers next time. To exit test mode follow steps 1,2 and 3 in part B of my writeup and type these commands in the command prompt one at a time hitting enter after each one.
bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS*
bcdedit.exe -set TESTSIGNING OFF
Now restart computer.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
SafinWasi said:
Okay,I'll guide you through a step-by-step tutorial to restore your Kindle.
Download and install the Android SDK. That is the first thing any Android modding guy must have. It provides you with the ADB and Fastboot executables which you're gonna need.
Download and install the Kindle Fire HD ADB drivers. You're gonna need them since the official Google drivers that came with the SDK are not supported by Amazon.
Modify your path variable. To do this,right-click on 'My Computer' and select properties. Click on "Advanced System Settings" and then "Environment Variables". At this point,you should copy the path to the tools and platform-tools folders of your SDK and paste them in the "path" system variable . If you want a video tutorial:http://www.youtube.com/watch?v=oaNM-lt_aHw
See if ADB and fastboot works. Open CMD from Run and type in ADB or fastboot. If it returns a lot of text,it's working.
Now type in:
Code:
fastboot -i 0x1949 getvar product
It'll return <waiting for device>
Turn off the Kindle and plug it in. If it boots into fastboot,you're good to go with KFFA
If it doesn't boot into fastboot,you'll have to buy a fastboot adapter or make one.
.
Click to expand...
Click to collapse
Okay, I got the amazon drivers installed on my machine, and had fastboot and adb working from the command prompt after adding all of the paths to the PATH environment setting.
I typed in:
Code:
fastboot -i 0x1949 getvar product
and I got the prompt <waiting for device>
However when I attach the device, it just boots (with the weird droid animation) - I cannot see anything to say that it has fastbooted. Does it display any different?
I have also typed adb devices and I don't think my PC is seeing the Kindle Fire HD as I get no devices shown in the List of Devices?
Does this mean I need a fastboot cable?
Would installing cyanogenmod on this be an option now? Or would that just make matters worse at this stage?
++ EDIT ++
Actually, uninstalled and reinstalled amazon adb drivers, and retyped:
Code:
adb devices
and it output:
D025A0A0241220KP device
so tried the fastboot -i 0x1949 getvar product command again, but still the device booted normally
SafinWasi said:
Don't do that. Just download my Flasher and extract it. There is another zip inside,which has the drivers. Just install them normally.
Sent from my device running CyanogenMod 11
Click to expand...
Click to collapse
By the way just wanted to say thanks for providing the Flasher.
Amazon drivers extracted and installed like a charm (once I allowed them to install to the default location)
silentbazz said:
Does this mean I need a fastboot cable?
Click to expand...
Click to collapse
The only time you don't need one is if you can access the OS and you have functioning root. If you don't have this then you must have a fastboot cable. If you have a Motorola cord laying around try that.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
LinearEquation said:
The only time you don't need one is if you can access the OS and you have functioning root. If you don't have this then you must have a fastboot cable. If you have a Motorola cord laying around try that.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
Click to expand...
Click to collapse
Ahh okay, I understood that I might be able to get the device to enter fastboot without a cable.
I must have read this wrong.
Okay, as I am not in the United States I am guessing eBay.co.uk is my best option?
Will something like this do the trick?
silentbazz said:
Ahh okay, I understood that I might be able to get the device to enter fastboot without a cable.
I must have read this wrong.
Okay, as I am not in the United States I am guessing eBay.co.uk is my best option?
Will something like this do the trick?
Click to expand...
Click to collapse
Should work fine.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
LinearEquation said:
Should work fine.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
Click to expand...
Click to collapse
Okay, great, have got one ordered, so will hopefully be able to get this sorted soon.
A sincere thanks to everyone who has offered sage advice above.
Some ace tips here, hopefully I'll get this sorted for him
Thanks again!!!!
silentbazz said:
Okay, great, have got one ordered, so will hopefully be able to get this sorted soon.
A sincere thanks to everyone who has offered sage advice above.
Some ace tips here, hopefully I'll get this sorted for him
Thanks again!!!!
Click to expand...
Click to collapse
You're welcome. Keep us updated.
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app