Database Develop

XPOSED not working Firmware .257

Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.

Works fine for me. Are you sure you are rooted
Sent from my C6903 using XDA Premium 4 mobile app

Works perfectly for me as well.

Gravity Box working good.
but transparent not working.(statusbar and navibar)

Works great here thanks gregbradley for the tip
Sent from my C6903 using Tapatalk 2

crimsonm said:
Gravity Box working good.
but transparent not working.(statusbar and navibar)
Click to expand...
Click to collapse
Same here, transparency not working

3r1k said:
Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.
Click to expand...
Click to collapse
Uninstall any mods you have installed and then re-install xposed.
Download one mod which you know works, like gravity box.
Then activate it by checking the box within modules.
Then go to framework and click install/update.
Then click reboot and allow it to restart the phone.
Once rebooted, click on gravity box and it should allow you in, if it does then youre golden.
If this doesn't work then you may want to check if you've rooted your phone correctly and you granted superuser access to Xposed in the first place, if that is the problem then force stop xposed and go to super user (the app) and remove xposed from the list, then re open xposed and grant it access for all time.
Should do the trick.
Once it's working, you're free to redownload all the mods you like.
Also sounds like you may have reinstalled Xposed from titanium, remove xposed using titanium and wipe data for the xposed app also in titanium, then reinstall xposed from scratch, also remove any mods that you may have before doing this too.

Yogaxl said:
Same here, transparency not working
Click to expand...
Click to collapse
Transparencie doesn't work (on stock launcher, try Nova) but other things are working great.
I always hated Xposed but I must admit - it's great on Z1.
CRT animation screen off, advanced power menu, disable stupid mobile data warning.
Awesome apk
You could take systemUI from ROM that have transparent status and nav bar and simple use that systemUI.apk.
Just say tnx to developer.
Sent from my Z1

It didn't work for me until I installed SuperSu over the default SU app.
Sent from my C6903 using xda app-developers app

3r1k said:
Just wondering if you guys experience the same issue?
None of the modules work for me.
app_process line is black and highlighted red instead of green with numbers.
Click to expand...
Click to collapse
Yep working fine for me

-App Settings
-GravityBox
-Hide Stamina mode icon
-Xblast Tools
-XuiMod
All working fine

benziii said:
-App Settings
-GravityBox
-Hide Stamina mode icon
-Xblast Tools
-XuiMod
All working fine
Click to expand...
Click to collapse
I can also confirm tweakbox

Yogaxl said:
Same here, transparency not working
Click to expand...
Click to collapse
Just installed it, latest version of Gravitybox.
I'm on MonxDified rom, it doesn't work...
Any other suggestions?

Missing a few mods in 4.3 I had on 4.1.2

I have just installed the rom [JB 4.3][UB&LB][9.2.A.0.295] Official Firmware - Rooted&Deodexed from the DaRk-L0rD
Im enjoying 4.3 there are just a few simple mods I used to have on my old rom I would like to know if they can work on 4.3
Mods:
1. Close all button on open apps
2. Additional sound setting for all volumes when you press the volume key, someone did a great mod that gave me all volumes when I pressed the setting key after volume up
3.Remove the mobile data is off notification everytime the phone starts or you turn the mobile data off
4. De-bloat zip I can run in CWM to remove all the bloatware, much easier than doing it all manually with a root app removed
5. Shrink the bottom navigation bar that has the home, back button and recent apps buttons on, I had got used to it being around 70%of that size!
Are any of those 5 available?
Pleased to see Sony seem to have fixed the Bluetooth volume problems they used to have I had replace some file to fix, I also replace the wifi driver which made a big difference to how far I could stay connected to the wifi at work, does the new rom need any tweaks like that or is the wifi strength good out the box?
Thank You

Use xposed framework (you must use xperia dedicated) with Gravity Box installed to get 1, 2 and 3. Or use Xperia Xposed along with Gravity Box to get awesome possibilities
My phone is T. Xperia T.

romcio47 said:
Use xposed framework (you must use xperia dedicated) with Gravity Box installed to get 1, 2 and 3. Or use Xperia Xposed along with Gravity Box to get awesome possibilities
My phone is T. Xperia T.
Click to expand...
Click to collapse
Thank You, but you may as well have spoken French to me then, any chance you can possibly send me a few links to topics I should read that will help me understand what xposed frame, xperia xposed and gravity box are?
Thank You

I understand That was my first thought too.
Here are the links:
http://forum.xda-developers.com/showthread.php?t=1574401 link to Xposed Framework thread
http://forum.xda-developers.com/showthread.php?p=48484642 link to a post with Xperia dedicated xposed framework app
After installing the app you must inject appropriate files (use first step inside the app) then reboot the phone and you can proceed to the next step - downloading the modules:
Gravity Box and Xperia Xposed can be downloaded directly from the Xposed Framework app in download section. After downloading and installing both you must enable them in "modules" section and reboot the phone. Then you can start modding the phone
Some of the mods require rebooting the phone but some of them applies instantly. I have modded almost everything in my phone - from the very top to the very bottom (literally from the status bar to the navbar )
Good luck!
My phone is T. Xperia T.

romcio47 said:
I understand That was my first thought too.
Here are the links:
http://forum.xda-developers.com/showthread.php?t=1574401 link to Xposed Framework thread
http://forum.xda-developers.com/showthread.php?p=48484642 link to a post with Xperia dedicated xposed framework app
After installing the app you must inject appropriate files (use first step inside the app) then reboot the phone and you can proceed to the next step - downloading the modules:
Gravity Box and Xperia Xposed can be downloaded directly from the Xposed Framework app in download section. After downloading and installing both you must enable them in "modules" section and reboot the phone. Then you can start modding the phone
Some of the mods require rebooting the phone but some of them applies instantly. I have modded almost everything in my phone - from the very top to the very bottom (literally from the status bar to the navbar )
Good luck!
My phone is T. Xperia T.
Click to expand...
Click to collapse
Installed them both, Thank You very much.
WOW I cant believe the amount of settings these apps give you for customisation!

dougie175 said:
I have just installed the rom [JB 4.3][UB&LB][9.2.A.0.295] snip ...
4. De-bloat zip I can run in CWM to remove all the bloatware, much easier than doing it all manually with a root app removed
Click to expand...
Click to collapse
Consider Android Tuner. To my opinion it makes a script dispensable, bcs it allows selecting all apps to remove in one go.

peter-k said:
Consider Android Tuner. To my opinion it makes a script dispensable, bcs it allows selecting all apps to remove in one go.
Click to expand...
Click to collapse
Thanks Peter Ill check it out now.

Also has anyone got any ideas what the best way to remove the "mobile data is disabled" notification?
I have tried using the ongoing notification blocker in GravityBox to block the OMA Client Provisioning which is what I thought would block it. But unfortunately is makes no difference
Thanks

Xposed - Someone installed it?

Just received my brand new Z3,but already feeling the itch for some customization.
Someone already tried playing around with xposed?
It is fully working or at least some features?
Thanks

After rooting/bootloader unlocking the phone, I installed Xposed. It works well. I use the following:
App Settings - I made systemUI (and most of my non-sony apps) 240 dpi.
GravityBox (smaller nav bar, orange icons, replacement battery, AM/PM removal, 3 dot on nav bar right, search on nav bar left.
Tinted Status bar
Xperia Xposed - installed but I decided not to use anything
Please note, per conversations on general, unlocking the bootloader will irreversibly worsen the camera's low-light picture quality and kill native miracasting/chromecasting ability linked to Sony's DRM keys

I'm using tons of Xposed modules and I couldn't live without it. It's one of the greatest pieces of software ever written and I'll stay away from Android L until Xposed works on it. i never felt the urge to use CM or another rom since I'm using Xposed, GravityBox alone is such a mighty module that it replaces a plethora of third party rom features.

It's really hard to live without Xposed after having it for so long on my Moto X. I'm just not willing to lose the camera quality by unlocking the BL. Of course, there are other things I'm itching to do as well with root (like freezing and deleting lots of useless apps that suck battery!)

I am using xposed with
- xstana module
- tinted status bar
- gravity box
Everything works perfectly!

mickliq said:
It's really hard to live without Xposed after having it for so long on my Moto X. I'm just not willing to lose the camera quality by unlocking the BL. Of course, there are other things I'm itching to do as well with root (like freezing and deleting lots of useless apps that suck battery!)
Click to expand...
Click to collapse
I don't mind losing some of the camera quality either, I believe that people will either find a way to reverse the process, or make something better.
I'm just waiting till I can backup my TA partition.
Sent from my D5803

I istalled Xposed and run xled, xquiet hours and cyan lock screen the lose of the cameras low light abilty is not a big problem i use camera fv5 and change the iso settings

So no way in hell to get root without unlocking the bootloader?

i was using pie controls from gravitybox with navbar disabled, but i found out that pie doesn't appear when using camera with physical button with phone in standby.... anyone can confirm this?

I use XBlast and Xposed LED Control.
Both works fine. What does NOT work is GravityBox. But why? Can someone help me?
When trying to start it, it says "GravityBox System Framework does not answer" in german. in english perhaps its something like "cant retrieve System Framework data" or something like that.
It doesn matter how often i try, always the same error message

tranceonline said:
I use XBlast and Xposed LED Control.
Both works fine. What does NOT work is GravityBox. But why? Can someone help me?
When trying to start it, it says "GravityBox System Framework does not answer" in german. in english perhaps its something like "cant retrieve System Framework data" or something like that.
It doesn matter how often i try, always the same error message
Click to expand...
Click to collapse
You need to enable it in Module and restart phone. After that you can do what you want! In Download section, you can find more module with search filter by typing: xperia

Zanr Zij said:
You need to enable it in Module and restart phone. After that you can do what you want! In Download section, you can find more module with search filter by typing: xperia
Click to expand...
Click to collapse
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.

tranceonline said:
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.
Click to expand...
Click to collapse
I think gravity Box can not handle sonys ui. Had it before on lg g2 stock rom. Just some features worked. Keep in mind that gb is actually for vanilla kitkat(aosp,maybe cm)

GB worked fine for me on the Z1C, but eventually some features require a deodexed rom. I've always been using RomAur.

tranceonline said:
Thx but did you read what i wrote? do i look as i use xposed the first time??
I am using xlast and xposed led, as i mentioned before.
Click to expand...
Click to collapse
I did not mean you have to enable xposed installer. I said: you have to enable GravityKK module by tick the box, do nothing more, restart the phone first. After that you can config without any framework message error!

xposed works great
I using xposed for remote play (ps4)
and its workign great!

kekec777 said:
I using xposed for remote play (ps4)
and its workign great!
Click to expand...
Click to collapse
How does this work?
With bootloader unlocked? (I think so )
THX

gabsi55 said:
How does this work?
With bootloader unlocked? (I think so )
THX
Click to expand...
Click to collapse
I actually just installed CM11 for my Samsung Tab 2 p5110 so i have a custom stock rom..

kekec777 said:
I actually just installed CM11 for my Samsung Tab 2 p5110 so i have a custom stock rom..
Click to expand...
Click to collapse
Ah ok...
Thought you are using unlocked Z3C ..

Zanr Zij said:
I did not mean you have to enable xposed installer. I said: you have to enable GravityKK module by tick the box, do nothing more, restart the phone first. After that you can config without any framework message error!
Click to expand...
Click to collapse
Yes and as i said, i used Xposed before. what i want to say with that is : I know how Xposed works and how to use it. I know that you have to "activate" modules with the checkbox.
still, GB won't work.

xposed framework + gravity installation on stock rom

Anyone has a foolproof guide to install xposed framework on a stock rom?
I tried the normal installation but it doesnt work(resources subclass), should i try flashing it through twrp recovery?
P.s. i have full root and i am on 133sp01 official.

No way at this moment to full use xposed because isn't compatible with Huawei ROMs. It crashing HW launcher.
To solving it you should disabled resources hooks but some modules want it to properly working.
2.5.1 and lower versions allowing to enable hooks but still launcher is crashing.
Sent from my HUAWEI P7-L10

revery0 said:
Anyone has a foolproof guide to install xposed framework on a stock rom?
I tried the normal installation but it doesnt work(resources subclass), should i try flashing it through twrp recovery?
P.s. i have full root and i am on 133sp01 official.
Click to expand...
Click to collapse
yes u can install framework but make sure u install old version about 6 months ago .. and u good to go

Simona Simmy said:
yes u can install framework but make sure u install old version about 6 months ago .. and u good to go
Click to expand...
Click to collapse
Normall installation or flash with twrp?

to me if I work well:
*
Having eliminated the set-immutablelist
*
Xposed framework version 2.5. dl.xposed.info/modules/de.robv.android.xposed.installer_v28_8b8a7e.apk (not let me put Link)
*
Once you have installer Xposed Installer, select Framework, you click Install / Update and then restart the phone.
*
After restarting really in Framework already have Active 50 and 46 as well as Included.
*
Now if you are looking for the download and GravityBox (KK) version 2.9.0, download and install.
*
Remember that each downloaded module must be activated in modules and restart.
*
And other modules. If you are interested in Greenify and Intelli3G you the download Play and then install and active in modules.
a greeting

revery0 said:
Normall installation or flash with twrp?
Click to expand...
Click to collapse
never did other than normal..

ok 2.5 installs correctly!
But...
After installation widgets and icons loose their transparency and look ugly and bulky...i tried changing theme and reboot but it didn't work.
Any clues?
https://drive.bitcasa.com/send/x1UQH2YeoXmeKCZnc0ildX74oJSv80sHAaZnLGvPvbS0

revery0 said:
ok 2.5 installs correctly!
But...
After installation widgets and icons loose their transparency and look ugly and bulky...i tried changing theme and reboot but it didn't work.
Any clues?
https://drive.bitcasa.com/send/x1UQH2YeoXmeKCZnc0ildX74oJSv80sHAaZnLGvPvbS0
Click to expand...
Click to collapse
Did you read my post? I wrote that Xposed crashing HW launcher. You have to disabling hooks in settings but many modules will not work properly.
Sent from my HUAWEI P7-L10

I have red your post but it wasnt as clear as inrepe's post.. i understand now. Thank you, I just need the lnavbar and navbar size and hide, modules. Do they work? Iam in stock 133sp01...

revery0 said:
ok 2.5 installs correctly!
But...
After installation widgets and icons loose their transparency and look ugly and bulky...i tried changing theme and reboot but it didn't work.
Any clues?
https://drive.bitcasa.com/send/x1UQH2YeoXmeKCZnc0ildX74oJSv80sHAaZnLGvPvbS0
Click to expand...
Click to collapse
that is its issue and will never be solved.. already disputed onto this to actual app developer .. he ignored..
yours actually looks still ok .. but on mine previous honor 6 it was even worse icons..
---------- Post added at 12:14 AM ---------- Previous post was at 12:12 AM ----------
revery0 said:
I have red your post but it wasnt as clear as inrepe's post.. i understand now. Thank you, I just need the lnavbar and navbar size and hide, modules. Do they work? Iam in stock 133sp01...
Click to expand...
Click to collapse
just try if wont work u just uninstall ..
i had gravity box , screen off tapping status bar , no volume warning .. root cloak etc... make sure u install for 4.4.x or 4.2.x

revery0 said:
I have red your post but it wasnt as clear as inrepe's post.. i understand now. Thank you, I just need the lnavbar and navbar size and hide, modules. Do they work? Iam in stock 133sp01...
Click to expand...
Click to collapse
If you want to hide the navbar use GMD auto hide from the store, its not perfect but it works.
Why do you want to change the navbar size Its fine as it is.
Also it seemed skimming through the thread you are willing to introduce more bugs and issues into the system and potentially brick your device just to get these 2 features? Don't risk more issues your phone for a few minor visual tweaks learn to live with what you have.

Guide-How to enable double tap to wake and wake gestures on P9 Lite

Hi guys,
this is a guide how you can enable double tap to wake and wake gestures (Camera, Music,..., or custom apps) on your P9 Lite.
Somehow Huawei left the options in the system root, but made in invisible in the settings (same with many other Huawei devices). This is the same method others used for the P9.
All you need is:
-rooted device
(for rooting my device I followed this guide
http://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
the only thing I did different for getting SU working, was that I installed the root with the SRK-Tool and then I installed the mentioned SU-Update zip file)
-A file explorer with root access
-text editor app (I used the QuickEdit from the Playstore)
Even if this workaround worked 100% and without any problems on my device (rooted VNS-L31 on B100), your doing it on your own risk!
Step 1: Enter the file explorer and go to the root directory. Open the system folder and look for the build.prop file.
Step 2: Open the build.prop with the texteditor and search for the line ro.config.hw_easywakeup=false, now change the "false" into a "true" and save/exit the file. Just open it a again to ensure the entry has been realy changed and saved.
Step 3: Now go to the directory system/emui/base/xml, ther you open the file hw_easywakeupmotion_config.xml with the editor.
Step 4: Search for the line "EasyWakeupMotion name="Double_Touch" support="1" value="0" flag="0" keycode="131"" and change the value=0 into value=1. Again save and exit the file and ensure that it has been really changed.
Step 5: Restart your device and go into settings menu-->smart assistance-->motion controle. Now there are the options double tap and wake gestures available. You could also change the apps which are related to the different wake gestures. After activating it should be working right away. Otherwise do another restart and it should be good.
Hope everthing is working for you...I tested it now for some days and with some cases where I had to tap the display three times to wake up it worked flawlessly. There is also NO additional battery drain caused by the feature.
In addition it would be helpfull to mention which version of the phone you have, also if it's Asia or Europe etc.

Great job man

Strangely, doesn't work for me.
I can see the option and I have activated it but the phone does not wake up when tapping it
L31 B104

works, 8 times out of 10 ... and 'slow to answer you think you can do something? Meanwhile, thanks to good work

Thanks bro! This worked for me! All of your posts are useful! I got the phone yesterday updated to the latest version rooted it, Installed xposed but do you know a way to center the clock? I've tried to use GravityBox and Xblast Tools but none of the options works I rebooted the phone and still they don't do anything ugh.. I hope there will be a CM rom for this device and if you have anything else useful for this device like theming and stuff tell us! And also tell me what Xposed modules you use

huhgoji said:
Thanks bro! This worked for me! All of your posts are useful! I got the phone yesterday updated to the latest version rooted it, Installed xposed but do you know a way to center the clock? I've tried to use GravityBox and Xblast Tools but none of the options works I rebooted the phone and still they don't do anything ugh.. I hope there will be a CM rom for this device and if you have anything else useful for this device like theming and stuff tell us! And also tell me what Xposed modules you use
Click to expand...
Click to collapse
Nice to here for the modding of status bar (also centering clock) I'm using the "flat style bar indicator". Which works for me. I tried the xposed version from wanam as well as the regular v86 and I experienced better performance and compatibility with the regular version. Important is to do a cache and dalvik wipe after installing new modules, reboot then might take some minutes but dont be scared
The features I'm using from gravity is on one side the setup for the navigation bar keys (you can set longpress, double press actions) and on the other side the volume to skip songs
I use "doubletaptosleep" for statusbar double tap to sleep^^
The vibration tuner for setting a shorter vibration duration. Because the notification buzz was a bit to much for my taste
and last but not least I have the flat style status bar, this module ensures that the symbols in the statusbar turn black when you have a white or light background. You also can change the navigationbar
So this is pretty much it. I attached two screenshots. I changed my homescreen to a pretty much IOS style...guess some of you might be botherd with that but I always wanted a IOS-Style phone with the android functionality.

thefly351 said:
works, 8 times out of 10 ... and 'slow to answer you think you can do something? Meanwhile, thanks to good work
Click to expand...
Click to collapse
Yes, unfortunatley it's not always working on a single double tap, but if you do a double double tap it works everytime. Couldn't figure out why its like that. Strangely the letter function is always working. Another addition is that you can enable the letter "O" as well by just activating it with value=1 and setting the "keycode=137".
The response time is, how I fear, untouchable. I guess it has something to do with cpu reaction time from standby. But I haven't seen a faster reaction by other phones which are officialy supporting this feature. But I will keep looking.

Schlengge said:
Strangely, doesn't work for me.
I can see the option and I have activated it but the phone does not wake up when tapping it
L31 B104
Click to expand...
Click to collapse
Do you have the asian or european version of the phone?

To_High said:
Do you have the asian or european version of the phone?
Click to expand...
Click to collapse
European

Schlengge said:
European
Click to expand...
Click to collapse
Ok, maybe that's the point. I have the asian version. Propably they have changes in the software.

To_High said:
Ok, maybe that's the point. I have the asian version. Propably they have changes in the software.
Click to expand...
Click to collapse
Well, DT2W is always a function that has to be supported by the kernel.
So maybe different phone versions do have different versions of the kernel.
Could you tell me which kernel version you are using? Mine is 3.10.90-g7bbea55 (May 15)
Maybe Huawei will give us an official DT2W support soon. Afaik they also enabled it late on the P8 with a firmware update :fingers-crossed:

Schlengge said:
Well, DT2W is always a function that has to be supported by the kernel.
So maybe different phone versions do have different versions of the kernel.
Could you tell me which kernel version you are using? Mine is 3.10.90-g7bbea55 (May 15)
Maybe Huawei will give us an official DT2W support soon. Afaik they also enabled it late on the P8 with a firmware update :fingers-crossed:
Click to expand...
Click to collapse
My kernel is the 3.10.90-g9c133f1 (april 26th)....so its a different one. I hope so too, otherwise it would also make no sense to leave the coding in there rom because it only bloat it...Theres already a beta for the P9 with Android N. So lets hope for the best.

I have European version with same kernel as @Schlengge .
For me it works. Thank you @To_High !

Maybe you dont need double tap if we have fingerprint

works greate on L21 b120 rom , thanks

To_High said:
Somehow Huawei left the options in the system root, but made in invisible in the settings (same with many other Huawei devices). This is the same method others used for the P9.
Click to expand...
Click to collapse
Is there the same way to activate camera RAW saving option?

What about raise to ear to answer can be enabled?
Sent from my HUAWEI VNS-L21 using XDA-Developers mobile app

Nice tutorial, but in my case it doesn't work (VNSL31 Dual Sim European, Kernel 3.10.90-g424020b).
I deactivated fingerprint, but I couldn't deactivate the PIN unlock - tried to clear credentials, but I cannot change from PIN to "none".

Brilliant works perfect thanks for the guide!
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app

Thanks it works!