[Q] Galaxy Ace: stuck in bootloop for unknown reason? - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Reposting this here…
Hi, all!
My Samsung Galaxy Ace (S5830) running under a custom ROM The Ultimatum (I've been using this custom firmware for a few weeks now, with no real problems up until now), is bootlooping with no apparent reason. On a rare occasion, most apps on the phone stopped responding and would crash upon opening, and would require a restart before they worked again. Well this happened to me a few hours ago, so I decided to reboot my phone. After coming back to check my phone, I had found it was still booting. This has gone on for several hours now, and I've tried turning it on and off, removing batteries and everything. It's stuck in bootloop. I found this was odd, as I have had no dramas with the firmware I've been using. I have not made ANY recent changes to the phone whatsoever, so I can hardly believe it would be my fault.
Now, my question is; how do I fix this without wiping all data and installing a clean ROM? I have a lot of stuff in the internal storage I can't afford to lose, and it's really important to me. A full wipe of all data would not be ideal. I can access recovery mode.
I have tried a suggestion a user here made and made a nandroid backup, did a full wipe, reinstalled the ROM (which allowed me to get out of the bootloop) and then restored the data from the backup (which stuck me back in a bootloop). Still no idea and I really don't want to lose this data. If it's too much effort to fix the loop, is it possible to extract the data from the backups on a PC and manage to restore it to a clean wipe?
Thanks in advance!

Fixed my problem by doing a clean installation, and using Titanium Backup to extract the data from my nandroid backup. It was quite a simple solution, really. No idea why no one seemed to suggest it, though.
Oh well, my problem is solved.

Related

[Q] Can't install or update apps no memory error

Hi I am new to the Android market. I bought a Captivate last May read as many posts on how to flash a new rom to my phone. I flashed Firefly 3.0 to it in June. Everything was fine until a week and a half ago. I'm not sure what caused this, there was an update to TB that I downloaded, but I also deceided to change my boot animation to the Dark Blue. I did this but then deceided I liked the stock theme better and changed it back after a day or so. When the battery was low I put the phone on to charge over night, when I turned the phone on it went in to a boot loop. I put the phone in to recovery and re installed the rom.zip. The phone started to work again but was acting strange, so when I got home I re rooted, flashed back to stock and re installed Firefly 3.0 TB restored the phone, but when I set my ringtone and notifications etc, they would not save after I turned off the phone. I reset all thge ringtones and notifications and they stayed this time but |I now cannot download any apps or update apps, I keep getting out of memory error, even though I have about 11gb of memory on the internal sd and about 6gb on the exteral card. I apologize if this has been covered but I could not find any posts with the exact same issues. I'm reluctant to flash the rom again out of fear that I will have even less memory. Any help would be greatly appreciated.
Try, rebooting into recovery. Wipe cache and under advanced, wipe Dalvik cache. Reboot phone and wait while it rebuilds cache. Then go into applications. Find market and wipe data. When restoring from TiBu also make sure your not restoring SYSTEM data when you restore your apps.
Thanks for your help! I was able to download the swype beta again. I can't restore some of my old apps like ebay won't install, but new apps will, can't figure that one out. Thanks again for your help I really appreciate it!

[Q] Stuck on LG screen [Solved]

Hello, this is my second post here though I visit this forum quite frequently.
I have a p990, and I have encountered a very strange problem with my phone:
Until yesterday, everything was normal, and every couple of weeks or so I installed a new/updated rom via CWM without any problem (usually).
Yesterday I installed the CM7 Kang from Ricardo, and this also worked well. However, when I tried to install my previous rom again (Gueste 3.1, after 3 wipes of course. The reason I didn't go back to a nandroid backup was because of problem in making the last backup) it got stuck on the 2ng LG screen. the buttons are lighted when I touch the screen, but even waiting 30 minutes doesn't change anything.
Since then, I tried to install many different roms (the latest CM7 nightly and some others), and all gave me the same problem. The only things that I've been able to do in order to boot successfully was to revert to an old backup that I had, or to install MIUI, which did work for some reason.
When I tried to install the same version of CM9 again, I always got a boot loop.
Any idea as to what could cause such a strange behavior and how can it be fixed?
Sorry for the long post, I just wanted to give as many details as possible, and I'll be happy to give more details if I can if there are things that I forgot.
Thanks,
Beorn
Beorn1 said:
Hello, this is my second post here though I visit this forum quite frequently.
I have a p990, and I have encountered a very strange problem with my phone:
Until yesterday, everything was normal, and every couple of weeks or so I installed a new/updated rom via CWM without any problem (usually).
Yesterday I installed the CM7 Kang from Ricardo, and this also worked well. However, when I tried to install my previous rom again (Gueste 3.1, after 3 wipes of course. The reason I didn't go back to a nandroid backup was because of problem in making the last backup) it got stuck on the 2ng LG screen. the buttons are lighted when I touch the screen, but even waiting 30 minutes doesn't change anything.
Since then, I tried to install many different roms (the latest CM7 nightly and some others), and all gave me the same problem. The only things that I've been able to do in order to boot successfully was to revert to an old backup that I had, or to install MIUI, which did work for some reason.
When I tried to install the same version of CM9 again, I always got a boot loop.
Any idea as to what could cause such a strange behavior and how can it be fixed?
Sorry for the long post, I just wanted to give as many details as possible, and I'll be happy to give more details if I can if there are things that I forgot.
Thanks,
Beorn
Click to expand...
Click to collapse
Try this: go to recovery > mounts and storage and wipe system, data and cache, and flash your rom.
If wiping system doesn't work neither, catch a logcat when the phone bootloops
markop90 said:
Try this: go to recovery > mounts and storage and wipe system, data and cache, and flash your rom.
If wiping system doesn't work neither, catch a logcat when the phone bootloops
Click to expand...
Click to collapse
This fixed the same issue for me.
Wiped everything and flashed CM9. Works great (but battery drain is incredible!!!)
Solved!
markop90 said:
Try this: go to recovery > mounts and storage and wipe system, data and cache, and flash your rom.
If wiping system doesn't work neither, catch a logcat when the phone bootloops
Click to expand...
Click to collapse
Thanks, I did this, and now I was able to boot again with Gueste 3.1 (I'd rather wait for a bit more stable and mature version of CM9).
Actually, I did this thing twice, and it still didn't help, and in the third time I tried to make a logcat (I'm rather new to this logcat thing), and while trying to boot and make a logcat at the same time it suddenly started workind
I just hope that it will stay good now, and that I won't have this problem again in future flashes...
Thanks!

[Q] Get past bootscreen on i9000b without losing data

Good morning.
first of all, I've already read most of the posts that concern recovering the mobile, but here's the thing:
I flashed other ROMs a while ago, the ICS one iirc, then gave up and changed back to stock froyo, followed by an update to gingerbread via Kies, so my SGS already has the stock ROM. Everything worked fine, as expected, but once in a while when i turned the phone off and back on again, it got on a bootloop, and after many attempts it started ok. It also used to crash and turn itself off sometimes, but since it rarely happened, I wasnt bothered by that.
This time, I had to turn it off, and it just doent start back. I can access download and recovery mode, but since I have some things in its memory that I dont have backup, I really wanted to avoid the hard reset.
Do someone has any idea of how to proceed?
Thanks very much.
zanettirafa said:
Good morning.
first of all, I've already read most of the posts that concern recovering the mobile, but here's the thing:
I flashed other ROMs a while ago, the ICS one iirc, then gave up and changed back to stock froyo, followed by an update to gingerbread via Kies, so my SGS already has the stock ROM. Everything worked fine, as expected, but once in a while when i turned the phone off and back on again, it got on a bootloop, and after many attempts it started ok. It also used to crash and turn itself off sometimes, but since it rarely happened, I wasnt bothered by that.
This time, I had to turn it off, and it just doent start back. I can access download and recovery mode, but since I have some things in its memory that I dont have backup, I really wanted to avoid the hard reset.
Do someone has any idea of how to proceed?
Thanks very much.
Click to expand...
Click to collapse
do you have clockworkmod recovery? if so then wipe cache, dalvik cache and fix permissions.
if not boot to download mode and flash cwm. then do same as above :good:

[Q] Repair bootloop without loosing the data?

Hi guys!
I was using the Apocalypse ROM for over half a year, just recently my battery started to go bad, the cell phone wasn't able to be operable for more than few minutes and yesterday it got turned off in the process of booting up.
Since then, even though I got new battery or when I plug it to the charger, when I turn it on, the phone starts booting and the gets stuck switching between the Apocalypse screen and the cyanogen mod screen. It never boots into the system.
I don't have any backup anymore cause the phone was working ok long time. Of course I can reinstall the system, but with the normal process I would loose all my data.
So my question is: is there a way to repair the system (bootloop) and get to the system without wiping out all the data I have there?
Make a nandroid backup and wipe.. Later on you can restore using titanium backup
Since, ur rom isn't booting anymore & u don't even have its backup:sly:, the following info might help ya:-
★First of all, take a Nandroid backup★
Do u still have Apocalypse Rom.zip?? If yes, then,
1. Goto recovery,
2. Format /system(Note:Don't format/wipe anything except /system)
3. Then install the Apocalypse rom.zip the usual way.
But do this on ur risk.
Sent Via XDA™ Premium

Stuck on boot after TWRP restore

Hey,
I actually have a Note 10 plus, rooted with magisk and TWRP, but the Note10 and S10 are very similar, so Ill ask here too (ive waited like 15 hours and got no help in the note 10+ sub).
I have done a full nandroid backup. I restore it with TWRP, and I get stuck on boot, the note 10 screen (not samsung screen), and it never boots. If i restore only data, i get a bootloop.
I wipe dalvik and cache. No difference.
The backup IS NOT corrupted. I tried multiple backups and all is the same
What am I supposed to do? Im completely lost, and found literally nothing from google or here. Also if I flash firmware with odin after the restore, it will boot, but I lose all data, and eevrything. So thats not gonna work.
This is unbelievable and hasnt happened to me when i was doing this last time a few years ago.
I havent had access to my phone in over a day because of this now, its a complete disaster.
Please help. Thanks in advance guys.
masaforce said:
Hey,
I actually have a Note 10 plus, rooted with magisk and TWRP, but the Note10 and S10 are very similar, so Ill ask here too (ive waited like 15 hours and got no help in the note 10+ sub).
I have done a full nandroid backup. I restore it with TWRP, and I get stuck on boot, the note 10 screen (not samsung screen), and it never boots. If i restore only data, i get a bootloop.
I wipe dalvik and cache. No difference.
The backup IS NOT corrupted. I tried multiple backups and all is the same
What am I supposed to do? Im completely lost, and found literally nothing from google or here. Also if I flash firmware with odin after the restore, it will boot, but I lose all data, and eevrything. So thats not gonna work.
This is unbelievable and hasnt happened to me when i was doing this last time a few years ago.
I havent had access to my phone in over a day because of this now, its a complete disaster.
Please help. Thanks in advance guys.
Click to expand...
Click to collapse
I'm not sure, but maybe the nandroid backup isn't compatible with your device.
The thing is that these new phones have a different partition scheme. As you're rooted, you normaly boot on the recovery partition. But when you flash that backup image, maybe it doesn't take into account that partition setting, and that's what messes up your phone.
This is only a small hypothesis, but it can definitely explain your problem. As I've never done any backup myself, I'm not sure about this solution, but maybe try restoring the data on another device, then transfer it on your N10 with USB for example
masaforce said:
Hey,
I actually have a Note 10 plus, rooted with magisk and TWRP, but the Note10 and S10 are very similar, so Ill ask here too (ive waited like 15 hours and got no help in the note 10+ sub).
I have done a full nandroid backup. I restore it with TWRP, and I get stuck on boot, the note 10 screen (not samsung screen), and it never boots. If i restore only data, i get a bootloop.
I wipe dalvik and cache. No difference.
The backup IS NOT corrupted. I tried multiple backups and all is the same
What am I supposed to do? Im completely lost, and found literally nothing from google or here. Also if I flash firmware with odin after the restore, it will boot, but I lose all data, and eevrything. So thats not gonna work.
This is unbelievable and hasnt happened to me when i was doing this last time a few years ago.
I havent had access to my phone in over a day because of this now, its a complete disaster.
Please help. Thanks in advance guys.
Click to expand...
Click to collapse
I am experiencing the same issue.
Device: Tab S 10.5
I am tring to restore a Backup made with TWRP. the restore ends without any error, and when I reboot into System, it stays on Splash Boot forever!!
I though about a corrupted Backup, so went with Fresh Start install + TWRP + Root, then Backup TWRP.
Same issue, stuck on Splash Boot forever!!!
I even tried to unRoot just after the restore, it do not change anything!!!
I also noted that when the Device boot, there is a brif "double vibration", maybe notifying something is wrong.

Categories

Resources