[JB][4.3][9.2.A.0.295]SXTX CWM+Root+Deodex - Sony Xperia T, TL, TX, V

Nice day for all!
Attention!
I have Unlocked Bootloader, so i dont know what happen on Locked Bootloaders!!!
This "Method" i have tested on my SXTX, please dont try it on SXTX LB or on Sony Xperia T.
I'm not responsible of sploit devices etc. Everything what you do, you doing only on your own risk!!!
Follow the instruction carefully and everything gonna be allright
I changed the kernel flashing process from QuickIMG to Flashtool (Big thanks to ihasacat for testing)​
Some photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Unlocked Bootloader
Installed Flashtool
Installed QuickIMG (it can work using cmd (comand prompt))
Installed fastboot drivers
Installation process (UB):
- download the .ftf firmware and put it into the Flashtool/firmware folder
- download the kernel, extract the .elf file and put it into the Flashtool/firmwares
1. Copy into the device sdcard UPDATE-SuperSU-v1.93.zip and Deodex_for_SXTX_JB4.3_official.zip.
2. Start Flastool on your PC, flash device-> flashmode, select the SXTX USA Official JB4.3 firmware and press Flash.
3. Wait until its done and settle up your phone.
4. Turn off the phone, then connect the phone to PC while holding volume UP. Flashtool should show your SXTX is connected via Fastboot
5. On Flashtool, click Flash -> Flash using Fastboot, then on the window that pops up, click "select kernel to flash" (by DooMLoRD), then look for the kernel.elf you extracted earlier to Flashtool/firmwares folder
6. Reconect your SXTX and turn on, when you will see violet (rose) notification light, immediatley press Volume Up + button.
7. In recovery flash the UPDATE-SuperSU-v1.93.zip (i dont did any wipes)
8. Reboot and settle up your phone.
9. Reboot and enter to recovery, wipe dalvik cache then flash Deodex_for_SXTX_JB4.3_official.zip (Big thanks to sera18) original thread
Also:
Step 4-5 with using QuickIMG
- download the kernel, extract the .elf file and put it into the QuickIMG/images folder
- Power of your phone, start QuickIMG.exe, select the LT29i_4.3_kernel_CWM kernel, connect your SXTX to PC with holding Volume Up + button (blue notification light on the device) (you will see "conected" in QuickIMG) and press Flash button in QuickIMG, then wait!!! (for me it was long a bit to see "done")
Downloads:
SXTX USA Official JB4.3 firmware: here
JB 4.3 Kernel with CWM: here
SuperSU 1.93: here
Deodex for SXTX JB4.3: here
Other downloads:
QuickIMG: here
Flashtool: here
If smb need Xposed Installer 2.4.1: here it is
XDA:DevDB Information
[JB][4.3][9.2.A.0.295]SXTX CWM+Root+Deodex [27.02.14], a ROM for the Sony Xperia T
Contributors
Midleo, sera18, ihasacat
Version Information
Status: Testing
Created 2014-02-18
Last Updated 2014-02-27

Google Driver notification file SuperSU has infected file, so I can't download it!

chanhtrungnct said:
Google Driver notification file SuperSU has infected file, so I can't download it!
Click to expand...
Click to collapse
From what I understand, even though rooting in itself takes advantage of exploits in Android, I don't see why Google would mark it as a virus; downloading the files individually seems to work and don't get flagged as a virus.
On the other hand, don't see why the OP doesn't link to Chainfire's original hosted file here, or even attach the file directly here in the forum, instead of linking it to a Google Drive account.
I can assure you that the one I've just posted works.

chanhtrungnct said:
Google Driver notification file SuperSU has infected file, so I can't download it!
Click to expand...
Click to collapse
The other works?
i upload the SuperSU to other ste!

Updated! You can download it from Download menu of this thread or from the link "Xda developers"

Thanks man!

chanhtrungnct said:
Thanks man!
Click to expand...
Click to collapse
Is it works for you?
Nobody reporting...

Yes, it works man!
Sent from my LT29i using XDA Premium 4 mobile app

chanhtrungnct said:
Yes, it works man!
Sent from my LT29i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Now im Happy! I thought that im posted a "not working" method

Great work!! It's work perfect but the QuickIMG don't work for me so I install kernel through the flashtool and then it works!!
Thanks Man!!

zzz017 said:
Great work!! It's work perfect but the QuickIMG don't work for me so I install kernel through the flashtool and then it works!!
Thanks Man!!
Click to expand...
Click to collapse
I wanted to post method without QuickIMG, like you did with flashtool but i didnt tryid it on my own... so
How you did exactly (steps)??? and i place it into the first post!!!
And there is another way also via "cmd, comand prompt" - i sure its work but i didnt tryied!!! if smb tryid it then let me know and i include method into the first post

Flashtool
If smb have troubles with QuickIMG, for those I changed the kernel flashing process from QuickIMG to Flashtool (Big thanks to ihasacat for testing)

The supersu cannot be download, can fix that link?? it say "We're sorry. You can't access this item because it is in violation of our Terms of Service."

zjlow1314 said:
The supersu cannot be download, can fix that link?? it say "We're sorry. You can't access this item because it is in violation of our Terms of Service."
Click to expand...
Click to collapse
Hi, of course! I attach!

zjlow1314 said:
The supersu cannot be download, can fix that link?? it say "We're sorry. You can't access this item because it is in violation of our Terms of Service."
Click to expand...
Click to collapse
So, i remeber that i already uploaded the SuperSU to XDA, so i changed the direct link on first post (you can download it now), and you can also downloaded it from downloads menu!!!!

Midleo said:
So, i remeber that i already uploaded the SuperSU to XDA, so i changed the direct link on first post (you can download it now), and you can also downloaded it from downloads menu!!!!
Click to expand...
Click to collapse
Thank you so much!! Working great on my xperia tx...

zjlow1314 said:
Thank you so much!! Working great on my xperia tx...
Click to expand...
Click to collapse
:good:

Thanks bro.
Now My TX run smoothly and perfect :good:

cptruong said:
Thanks bro.
Now My TX run smoothly and perfect :good:
Click to expand...
Click to collapse
Your welcome mate! :good:

just unlocked bootloader, use your guide and now im using 4.3 with root n more~~! thanks dude
:highfive::highfive::highfive:

Related

Root TX 9.1.B.1.67 with Stock kernel (Unlocked Bootloader)

in this Method you can save orginal kernel at the end...
1.Download Root Package and copy it in Internal Memory
http://www.mediafire.com/download/gwweff6uadpwkgc
2.Download Stock Kernel .411 with CWM and Flash it via fastboot
http://www.mediafire.com/download/6p7oto8u7ddpi8q
3.after rebooting press Volume Down for CWM Recovery
4.Install Root Package
5.Flash original 67 kernel via Flashtool
http://www.mediafire.com/download/09910kmt6ju8wfn
7.Finally for Install CWM Recovery use this Program (Only version 4 worked)
http://www.mediafire.com/download/kumx4d05mxkls6z
Enjoy...
------------------------------------------------
Hossein Kazemi
دوستان فارسی زبان میتونن سوالات و فارسی یا فینگلیش بپرسند
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LockDown_HK said:
in this Method you can save orginal kernel at the end...
1.Download Root Package and copy it in Internal Memory
http://www.mediafire.com/download/gwweff6uadpwkgc
2.Download Stock Kernel .411 with CWM and Flash it via fast boot
http://www.mediafire.com/download/6p7oto8u7ddpi8q
3.after rebooting press Volume Down for CWM Recovery
4.Install Root Package
5.Flash original 67 kernel via Flashtool
http://www.mediafire.com/download/09910kmt6ju8wfn
7.Finally for Install CWM Recovery use this method
http://forum.xda-developers.com/showthread.php?t=2012738
------------------------------------------------
Hossein Kazemi
دوستان فارسی زبان میتونن سوالات و فارسی یا فینگلیش بپرسند
Click to expand...
Click to collapse
doostaaane farsi zabaan ghorbune to beran aziizzzzzzzzzzzzzzz....
kheili mikhamet dadash
vaghti emzaato khundam kolli zogh kardam
merci bekhatere Guide
ye Thanlk ham mehmune maa baash
ebi4321 said:
doostaaane farsi zabaan ghorbune to beran aziizzzzzzzzzzzzzzz....
kheili mikhamet dadash
vaghti emzaato khundam kolli zogh kardam
merci bekhatere Guide
ye Thanlk ham mehmune maa baash
Click to expand...
Click to collapse
Merci Dadash Golamm...Age Ravesh o test kardi Javab Dad khabaresho bede...Chon khodam faghat roye 2 ta gooshi Test kardam...
Translations : ( We have tested this method on two phones and it worked well...Please report your results after testing.... )
I want Direct Link for "9.1.b.1.67"
No Google Drive Pls
قربون ایرونیا :victory:
root works, but after installing CWM, the phone is not in CWM, always loaded firmware.
nnmka said:
root works, but after installing CWM, the phone is not in CWM, always loaded firmware.
Click to expand...
Click to collapse
Install again or use version 4 of this program for install cwm...
Sent from my MediaPad 10 FHD using Tapatalk HD
LockDown_HK said:
Install again or use version 4 of this program for install cwm...
Click to expand...
Click to collapse
It did not help, is not included in the CWM: (
nnmka said:
It did not help, is not included in the CWM: (
Click to expand...
Click to collapse
Are you sure that the installation has been completed correctly?We've checked it ،and CWM worked well...
ebi4321 said:
doostaaane farsi zabaan ghorbune to beran aziizzzzzzzzzzzzzzz....
kheili mikhamet dadash
vaghti emzaato khundam kolli zogh kardam
merci bekhatere Guide
ye Thanlk ham mehmune maa baash
Click to expand...
Click to collapse
LockDown_HK said:
Merci Dadash Golamm...Age Ravesh o test kardi Javab Dad khabaresho bede...Chon khodam faghat roye 2 ta gooshi Test kardam...
Click to expand...
Click to collapse
May i remind you that you need to post in english please, you can add the english translation below your own if you prefere to post that way.
Thanks
The-Hulk said:
May i remind you that you need to post in english please, you can add the english translation below your own if you prefere to post that way.
Thanks
Click to expand...
Click to collapse
sorry ,this is a conversation between me and my friends
OK.I'll translate it...
LockDown_HK said:
Are you sure that the installation has been completed correctly?We've checked it ،and CWM worked well...
Click to expand...
Click to collapse
Yes, there is no error in the console, writes that the setting is correct. Strangely, that does not work, installed without errors
maybe mine is the only case
nnmka said:
Yes, there is no error in the console, writes that the setting is correct. Strangely, that does not work, installed without errors
maybe mine is the only case
Click to expand...
Click to collapse
Maybe,please wait for other test results
can somebody tell me that after UB I will lose BE forever, right?
nnmka said:
Yes, there is no error in the console, writes that the setting is correct. Strangely, that does not work, installed without errors
maybe mine is the only case
Click to expand...
Click to collapse
no, you are not the only one, currently i have root, but can't install cwm, it always goes to OS directly, without giving time to press vol-down button to go to recovery, it's strange :|
ebi4321 said:
no, you are not the only one, currently i have root, but can't install cwm, it always goes to OS directly, without giving time to press vol-down button to go to recovery, it's strange :|
Click to expand...
Click to collapse
root access work completely on your phone?
has anyone tried rooting .67 with flashtool?
sid3091 said:
has anyone tried rooting .67 with flashtool?
Click to expand...
Click to collapse
flashtool just uses the tools provided by doomlord or bin4ry so if they don't work, flashtool wont work.
PS, why don't you try it and report back?
gregbradley said:
flashtool just uses the tools provided by doomlord or bin4ry so if they don't work, flashtool wont work.
PS, why don't you try it and report back?
Click to expand...
Click to collapse
lol. You've got me there.
Any risks? Ive put everything i had and imported this phone
sid3091 said:
lol. You've got me there.
Any risks? Ive put everything i had and imported this phone
Click to expand...
Click to collapse
No more risk than anyone else trying it.
But I don't think it will work.
Try reading this thread on how to get root on this firmware.
Its in the first 5-6 of the threads in the general section...
nnmka said:
Yes, there is no error in the console, writes that the setting is correct. Strangely, that does not work, installed without errors
maybe mine is the only case
Click to expand...
Click to collapse
I've added a new method , please check first topic...

[ROM][TX][LT29i][UBL ONLY][4.3]JB 9.2.A.1.131 {LEAK} - Fixed-Deoxeded-Zipaligned

As most of you already know, the Andoid 4.3 for the Xperia TX has been leaked/ported thanks to EXR Team.
In this version i used a kernel with integrated the CWM and i deoxeded the ROM.​
Neither i nor the apps/mods developers are responsible for bricked devices, dead SD cards,
global economic crisis, James Bond destroyed Aston Martin DB5 or M's death.
YOU choose to make these modifications. Follow carefully the instructions you will have no problem at all.
Click to expand...
Click to collapse
Features
ONLY for UNLOCKED Bootloaders!
Based on 9.2.A.1.131 Leaked Firmware
Deoxeded
Kernel with Integrated CWM
Zipaligned
Debloated (Only some Google's stuff)
Screenshots​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS:
1.This ROM requires UNLOCKED BOOTLOADER! Don't try to install it on LOCKED BOOTLOADER if you love your phone!
2. If you decided to Unlock your bootloader, remember to BACKUP YOUR DRM KEYS!
3. Install JB 4.1.2 : firmware 9.1.B.1.67 It's better a clean install of the stock ROM and not custom Roms based on these firmwares!
4. Root it and install CWM.
5. Now reboot your phone and enter in CWM.
6. Clear cache, dalvik cache and personal data.
7. Install the ROM and let it boot (just wait for 2-3 minutes!)
8. Now restart your phone and enter in CWM; Install the UPDATE-SuperSU-v1.86.
9. Now restart your phone!
10. Enjoy!
11. Don't forget to hit the THANKS button to all the contributors!
Skip steps 3 and 4 if you are already in one of these firmwares with root permissions and CWM
DOWNLOAD LINKS
JB 9.2.A.1.131: JB 9.2.A.1.131 mega.co.nz
UPDATE-SuperSU-v1.86: SuperSU v1.86 devhost
Credits:
EXR Team
Midleo
Notice:
1.Since this is an internal testing firmware, do not expect to see the same features on the official final release... Some things could be added while others removed...
2.If you are unable to download from PlayStore after the first boot, just reboot your phone!
Thanks
Too slow on mega.co.nz. if can upload to another host
devilmaycry2020 said:
Thanks
Too slow on mega.co.nz. if can upload to another host
Click to expand...
Click to collapse
Had some problems with Internet mate. I will upload it to devhost also later this afternoon
Not Booting
Phone wouldn't boot after flashing the ROM. All the steps in OP was followed. Unless I have to flash the kernel.elf via fastboot instead of letting it do it by itself through CWM.
you can make xperia V
Thanks you
Bootloop too
zzz017 said:
Bootloop too
Click to expand...
Click to collapse
Extract the META-INF folder from the attacked rar archive and replace it with the one that's inside the rom i uploaded. Now try to install the rom again and report back please
View attachment META-INF.rar
why album app does´t recognize the sd card it says that´s not mounted even updating the album apps to the latest it says that and on photo widget all the pictures appear but cant see on album because of that bug
DaRk-L0rD said:
Extract the META-INF folder from the attacked rar archive and replace it with the one that's inside the rom i uploaded. Now try to install the rom again and report back please
View attachment 2525936
Click to expand...
Click to collapse
dude @DaRk-L0rD .why is it not showing dev options??
romeoofair said:
dude @DaRk-L0rD .why is it not showing dev options??
Click to expand...
Click to collapse
Click on build number several times bro and you will get the developer options
I flashed superuser. But still my root is not working. What will be the problem?
Sent from my LT30p using xda app-developers app
pharix said:
I flashed superuser. But still my root is not working. What will be the problem?
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
ya my root is also not working
romeoofair said:
ya my root is also not working
Click to expand...
Click to collapse
Any known method to work root?
i had the same problem.
don't reboot after flashing the rom but flash SU update immediately, then reboot.
there is one strange thing..
when i make a cwm backup and want to reboot, the phone says root access possibly lost. fix?
you can choose yes or no.
Pollie81 said:
i had the same problem.
don't reboot after flashing the rom but flash SU update immediately, then reboot.
there is one strange thing..
when i make a cwm backup and want to reboot, the phone says root access possibly lost. fix?
you can choose yes or no.
Click to expand...
Click to collapse
Choose "no". You would lose CWM if you chose "yes".
I'm getting the same thing in Album as well. Although clearing data/cache and force stopping Album.apk helped but error re-occurs again. Temp workaround for my end is using Quickpix.
izuall187 said:
Choose "no". You would lose CWM if you chose "yes".
I'm getting the same thing in Album as well. Although clearing data/cache and force stopping Album.apk helped but error re-occurs again. Temp workaround for my end is using Quickpix.
Click to expand...
Click to collapse
i tried several times, doesn't matter if i choose yes or no.. root keeps working and so does cwm.
romeoofair said:
dude @DaRk-L0rD .why is it not showing dev options??
Click to expand...
Click to collapse
Click several time on build number bro
@DaRk-L0rD I've lost my CWM and Root access. Do you have a method with it
zzz017 said:
@DaRk-L0rD I've lost my CWM and Root access. Do you have a method with it
Click to expand...
Click to collapse
Try to flash again the kernel.elf from the rom bro.

{ROM}[T][STOCK][JB 4.3][UB&LB][9.2.A.0.295] Official Firmware - Rooted&Deodexed 25/02

{ROM}[T][STOCK][JB 4.3][UB&LB][9.2.A.0.295] Official Firmware - Rooted&Deodexed 25/02
Hello everyone
I proudly present you the official 4.3 fw 9.2.A.0.295!!​
Neither i nor the apps/mods developers are responsible for bricked devices, dead SD cards,
global economic crisis, James Bond destroyed Aston Martin DB5 or M's death.
YOU choose to make these modifications. Follow carefully the instructions you will have no problem at all.
Click to expand...
Click to collapse
Features:
1. Based on 9.2.A.0.295 Skyfall Edition CE
2. Deoxeded and Rooted
3. PhilZ Touch
4. Integrated kernel
5. Zipaligned
Since it's the official release it will work on both Locked and Unlocked bootloader​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions. Please follow carefully!
1. Install JB 4.1.2.
2. Root.
3. Install CWM.
4. Now enter in CWM
5. Wipe cache, dalvik cache and do a factory reset.
6. Now install the ROM.
7. Once finished installing the ROM, you have to flash immediately the UPDATE-SuperSU.
8. Now reboot your device.
9. Done
10. Enjoy the official 4.3 fw
**Skip steps 1-3 if you are already using a custom JB rom with CWM or a CM based rom that already has a kernel with integrated cwm
Download links
9.2.A.0.295 Rooted & Deoxeded : 9.2.A.0.295 Skyfall edition mega.co.nz
UPDATE-SuperSU : UPDATE-SuperSU
Credits:
Jozinek for the FTF file
matt4321 for helping me when i need him and for the kernel
peetr_ for the PhilZ Touch
steveboss for the help
Changelog
13/02: v1 Initial version
18/02: v2 with integrated dual recovery
25/02: v3 Switched to a new recovery fully working!
FAQ:
---Recovery works for sure when you flash a file from your sdcard. You could face also some random reboots. Backup and restore doesn't work currently.
Q:How to flash it on TL?
A:About the TL guys, i have no idea. The main difference is the baseband. I suppose you can install the ftf file excluding the baseband but i am not able to help you on the root thing.
Q:Can i use it on locked bootloader?
A: It's for both locked and unlocked bootloaders
Q: WiFi not working / MAC address issue?
A:: Please check here --- http://forum.xda-developers.com/showpost.php?p=37265217&postcount=8
Q: I don't have root access. What am i suppose to do?
A: Copy the Update-SU on your sdcard. Reboot in recovery and flash it again.
YEEAAAAAAHHHHHHHH, finally we have it.
You were hot on your toes getting this up, good work bro
Sent from my LT30p using Tapatalk
matt4321 said:
YEEAAAAAAHHHHHHHH, finally we have it.
You were hot on your toes getting this up, good work bro
Sent from my LT30p using Tapatalk
Click to expand...
Click to collapse
Thanks for the tips bro
Wow, this is great, thanks!
Can you install the xposed framework on this?
Sir, I want a photo of yours so I can put it on my wall.
Just kidding, thank you!
when is the kernel being flashed?
It's not in your updated zip and you're not flashing it by flashtool?
matt4321 said:
when is the kernel being flashed?
It's not in your updated zip and you're not flashing it by flashtool?
Click to expand...
Click to collapse
Step 11 bro
DaRk-L0rD said:
Step 11 bro
Click to expand...
Click to collapse
whheeeyyyy, I think I'm going blind haha! thanks man
---------- Post added at 01:52 AM ---------- Previous post was at 01:36 AM ----------
here is the kernel packed into a flashable zip: http://d-h.st/PtZ
EDIT: flashable kernel is working! you can now update with no need for flashtool
@DaRk-L0rD feel free to add this to the OP for simpler installation
waiting for the simple step
wipe flash reboot enjoy
How to install CWM after this rom? I can not install CWM
i can use in xperia TL how to install ?
makysssdroid said:
i can use in xperia TL how to install ?
Click to expand...
Click to collapse
Same question. I have xperia TL LT30at on Android 4.1.2.
Xperia TL
a_new_day1503 said:
Same question. I have xperia TL LT30at on Android 4.1.2.
Click to expand...
Click to collapse
Yes honestly the tl is the exact same as the t only thing is you wont be on lte but instead h plus o:good:r whatever its called
I m using it on my tl btw
corbett562 said:
Yes honestly the tl is the exact same as the t only thing is you wont be on lte but instead h plus o:good:r whatever its called
I m using it on my tl btw
Click to expand...
Click to collapse
My TL is rooted but i cant install CWM for it, i used http://forum.xda-developers.com/showthread.php?t=2012738 but after run install.bat, cmd is stucked at * daemon started successfully *.
Can u help me ? Thanks alot.
Deoxeded? ;D Thanks, I'll wait for a non-branded or T-Mobile HU update, but it's good to have something to experience with
a_new_day1503 said:
My TL is rooted but i cant install CWM for it, i used http://forum.xda-developers.com/showthread.php?t=2012738 but after run install.bat, cmd is stucked at * daemon started successfully *.
Can u help me ? Thanks alot.
Click to expand...
Click to collapse
u Have to check unknown sources and debug mode or it wont work
So if i want to try it coming from cm 10.2 have to install 4.1.2 First?
Send from IPAD with Tapatalk
flashtools does not recognize 295.ftf files
only recognize 141
what to do?
lol
HelixDNA said:
flashtools does not recognize 295.ftf files
only recognize 141
what to do?
Click to expand...
Click to collapse
im assuming u had the same problem as me lol its simple
at the end put .ftf lol

{ROM}[STOCK][JB 4.3][UB&LB][9.2.A.0.295] Official Firmware - Rooted&Deodexed

Hello everyone
I proudly present you the official 4.3 fw 9.2.A.0.295 from SingTel SG Rooted and Deoxeded!!
Since it's the official release it will work on both Locked and Unlocked Bootloaders​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions. Please follow carefully!
1. Download the 4.3 FTF file from here!
2. Install JB 4.1.2.
3. Root.
4. Install CWM.
5. Now enter in CWM and install the ROM.
6. Once finished installing the ROM, you have to flash immediately the UPDATE-SuperSU.
7. Now turn off your phone.
8. Open flashtool.
9. Flash device-> Flashmode.
10. Now select the 9.2.A.0.295 forSingTel SG .
11. Now you have to exclude everything except the kernel!! It's very important!
12. Now reboot your device.
13. Done
14. Enjoy the official 4.3 fw
**Skip steps 2-4 if you are already using a custom JB rom with CWM
Download links
9.2.A.0.295 Rooted & Deoxeded : 9.2.A.0.295 Rooted & Deoxeded mega.co.nz
UPDATE-SuperSU : UPDATE-SuperSU
Credits:
@chunlianghere for the FTF file,
@matt4321 for helping me when i need him!
1) Since i don't own the device, please try it and report. Most likely it will work properly.
Thanks in advance!
2) Currently there is no cwm that is working properly on our devices. Please be patient and a solution hopefully will come soon
DaRk-L0rD said:
1) Since i don't own the device, please try it and report. Most likely it will work properly.
Thanks in advance!
2) Currently there is no cwm that is working properly on our devices. Please be patient and a solution hopefully will come soon
Click to expand...
Click to collapse
i'm using xperia VL (sol21). Will try and hope if there is any signal. cause in 4.1.2 signal is ok, sim card reconized. But in 4.3 there is no signal.
DaRk-L0rD said:
1) Since i don't own the device, please try it and report. Most likely it will work properly.
Thanks in advance!
2) Currently there is no cwm that is working properly on our devices. Please be patient and a solution hopefully will come soon
Click to expand...
Click to collapse
Is there a problem of using this ROM for us in the Philippines?
Primark said:
Is there a problem of using this ROM for us in the Philippines?
Click to expand...
Click to collapse
Don't think so bro. Will work properly.
Just a tip: Please don't quote the 1st and the 2nd post. Tag me or just ask
Thanks in advance
This zip cannot be installed, I had tried many time, it show me an error: "set_perm: some changes failed e:error in /external_sd/.... (status 7) installation aborted"
DeviantArt2402 said:
This zip cannot be installed, I had tried many time, it show me an error: "set_perm: some changes failed e:error in /external_sd/.... (status 7) installation aborted"
Click to expand...
Click to collapse
1) Try to redowload the file.
2) Place it on your internal storage and not on the sdcard.
Please try this method and let me know
DaRk-L0rD said:
Don't think so bro. Will work properly.
Just a tip: Please don't quote the 1st and the 2nd post. Tag me or just ask
Thanks in advance
Click to expand...
Click to collapse
Will I lose every settings in my phone if I flash this manually? or does it work like the update of sony wherein everything is intact?
Primark said:
Will I lose every settings in my phone if I flash this manually? or does it work like the update of sony wherein everything is intact?
Click to expand...
Click to collapse
Everything will be deleted
Thank you and Yikes, I guess I have to backup everything first before I do anything LOL.
---------- Post added at 04:12 PM ---------- Previous post was at 04:04 PM ----------
I just have to ask is
the number two step a typo?
because I am assuming that what we have to install is the 4.3
but it says there that install jb 4.1.2
Primark said:
Thank you and Yikes, I guess I have to backup everything first before I do anything LOL.
---------- Post added at 04:12 PM ---------- Previous post was at 04:04 PM ----------
I just have to ask is
the number two step a typo?
because I am assuming that what we have to install is the 4.3
but it says there that install jb 4.1.2
Click to expand...
Click to collapse
Then read what says after step 14.
There is no mistake on the instructions bro
DaRk-L0rD said:
Then read what says after step 14.
There is no mistake on the instructions bro
Click to expand...
Click to collapse
Guess I'll have to buy you a beer thanks. LOL.
Primark said:
Guess I'll have to buy you a beer thanks. LOL.
Click to expand...
Click to collapse
Thanks bro, really appreciated
I just tried it bro.. It boots to sony logo however it does not go to the bootanimation and it reboots right away.
Since only the kernel from the .ftf is gonna be flashed, why is the whole .ftf needed?
Pangkoy08 said:
I just tried it bro.. It boots to sony logo however it does not go to the bootanimation and it reboots right away.
Click to expand...
Click to collapse
Thanks bro. I will take a look at it asap
NASSOOR said:
Since only the kernel from the .ftf is gonna be flashed, why is the whole .ftf needed?
Click to expand...
Click to collapse
Because you don't have to flash it in fastboot
so this ROM not fixed yet based user report ?
ovan febriawan said:
so this ROM not fixed yet based user report ?
Click to expand...
Click to collapse
I am afraid not mate. Will do some research and I will let you know asap. Maybe something wrong with the updater script
@NuriJ bro can you give me a hand please?
but i guess its best to fastboot the kernel

[SafetyNet] Stock Kernel + TWRP + Magisk + Magisk Manager for Z5 Single/Dual

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BOOT "Android 7.1.1 32.4.A.0.160"
dm-verity disabled
Sony RIC disabled
DRM fix installed
Click to expand...
Click to collapse
TWRP by @kv123
version 3.1.1-0
Click to expand...
Click to collapse
Magisk
use latest version
Click to expand...
Click to collapse
Magisk Manager
use latest version
Click to expand...
Click to collapse
Download
Google Drive
Latest Magisk & Magisk Manager
Installation
Download all files
Copy sumire_twrp, sumire_device_boot into "C:\Flashtool\x10flasher_lib"
Reboot device into Fastboot mode
Press LEFT SHIFT and click right mouse button into x10flasher_lib folder, then press "Open command window here" option
Flash boot "fastboot.exe flash boot boot_E66xx_Android_711.img"
Flash twrp "fastboot.exe flash recovery sumire_twrp.img"
Open device into Recovery mode (vol down + power)
Flash "Magisk-latest.zip" file
Flash "SafetyNet Cleaning Tools.zip" file
Reboot device
Do NOT forget to hit Thanks button :fingers-crossed:​
Buh to run adb i think root is required brov, so uninstalling magisk den to install again wont affect cos when yhu uninstall yhu loose root.
Thanks
---------- Post added at 12:04 PM ---------- Previous post was at 12:01 PM ----------
For Nougat 33 FW right??
---------- Post added at 12:06 PM ---------- Previous post was at 12:04 PM ----------
Before 4th step, yhu missed dat, press and hold on shift button den right click on a blank space and click on open command prompt in tha same folder tha files are located
whalesplaho said:
to run adb i think root is required
Click to expand...
Click to collapse
No, it does not required ROOT to run ADB (Android Debug Bridge). Follow just instructions.
whalesplaho said:
For Nougat 33 FW right??
Click to expand...
Click to collapse
Yes, it is for Nougat. I will edit post.
whalesplaho said:
press and hold on shift button then right click on a blank space and click on open command prompt in the same folder that files are located
Click to expand...
Click to collapse
I assume everyone know that. I shared a complete flash guide. If you flash kernel before you know that :fingers-crossed:
sceryavuz said:
No, it does not required ROOT to run ADB (Android Debug Bridge). Follow just instructions.
Yes, it is for Nougat. I will edit post.
I assume everyone know that. I shared a complete flash guide. If you flash kernel before you know that :fingers-crossed:
Click to expand...
Click to collapse
Okay brov....
Sure i know dat, im just saying tho for others!
Thanks...
Delete
peddy2k said:
Delete
Click to expand...
Click to collapse
You can't pass right?
I just add a tool, please try that.
New step : Flash "SafetyNet Cleaning Tools.zip" file
Working perfectly.... :good::good::highfive:
please port for z5p e6853
whalesplaho said:
Working perfectly.... :good::good::highfive:
Click to expand...
Click to collapse
I never used SafetyNet but it is a good thing AndroidPay service does not work on Turkey and I don't play Pokemon
anjelz2012 said:
please port for z5p e6853
Click to expand...
Click to collapse
Send kernel.sin file or create one by yourself. You can use this tutorial for your phone with your stock kernel.
sceryavuz said:
I never used SafetyNet but it is a good thing AndroidPay service does not work on Turkey and I don't play Pokemon
Click to expand...
Click to collapse
Same here buddy... Just decided to try!
Buh when i tried to change font with font selector, i gat freeze!
whalesplaho said:
Same here buddy... Just decided to try!
Buh when i tried to change font with font selector, i gat freeze!
Click to expand...
Click to collapse
Try to give root access on Magisk and check font selector permissions, sometime it is about Storage permission.
I am using Fontster (Exo) : https://play.google.com/store/apps/details?id=com.chromium.fontinstaller
I gave first Storage permission then ROOT.
sceryavuz said:
Send kernel.sin file or create one by yourself. You can use this tutorial for your phone with your stock kernel.
Click to expand...
Click to collapse
here link kernel.sin Z5P e6853 firmware 2.33 https://drive.google.com/file/d/0B2ZpxwD6Ar_0NmpEbk1qTFZwLVE/view?usp=sharing
anjelz2012 said:
here link kernel.sin Z5P e6853 firmware 2.33 https://drive.google.com/file/d/0B2ZpxwD6Ar_0NmpEbk1qTFZwLVE/view?usp=sharing
Click to expand...
Click to collapse
Here your thread : https://goo.gl/hIW7YV
sceryavuz said:
Here your thread : https://goo.gl/hIW7YV
Click to expand...
Click to collapse
Thanks, is amazing:good:
sceryavuz said:
Try to give root access on Magisk and check font selector permissions, sometime it is about Storage permission.
I am using Fontster (Exo) : https://play.google.com/store/apps/details?id=com.chromium.fontinstaller
I gave first Storage permission then ROOT.
Click to expand...
Click to collapse
It doesnt have any permission..... Using tha fonsters buh doesnt have feature to add fonts!
Thanks
I really would like to have SafetyNet pass. I'm considering switching from HaoZeke 's rom to something else. What rom do you suggest?
MichaMichaMicha said:
I really would like to have SafetyNet pass. I'm considering switching from HaoZeke 's rom to something else. What rom do you suggest?
Click to expand...
Click to collapse
If you don't like AOSP, only option is Stock.
Magisk repos updated now :fingers-crossed:
sceryavuz said:
Magisk repos updated now :fingers-crossed:
Click to expand...
Click to collapse
Hi, I know that is forum for z5, but i think is the se step for z5c also?
Just wondering where i can get boot file for sazuran?
I would really appreciate your help.
Edit:
I need first make my kernel wit drm, ric off and etc.
And then extract boot file somehow from my device?
Edit2:
Can I use boot file from twrp back up?but Its named boot.emmc.win..
I read that it can be flashed as it is without renaming or coverting it to "boot.img"
Or maybe you know the more simple way to get boot.img

Categories

Resources