Database Develop

[Q] Fastboot failure help needed

I am running a Verizon Moto X still on 4.2.2. I am rooted. This is NOT the Dev edition. I have plenty of experience with rooting/flashing these phones so back when I first got it the directions on rooting/flashing roms was VERY vague. No one specified you needed the Dev edition to unlock the boot loader. Well I think this came from at one point when I tried to flash TWRP (maybe). Either way, I want to take the OTA update and cannot. Does anyone know how to fix this without doing the RSD, reflash stock method? Here is a picture of what it looks like (thanks for your help in advance):

You should check out the 'Chinese Middleman' thread. If you get the bootloader unlocked you should be able to fix anything.

I can't unlock the bootloader since this is not a Dev edition. Unless something has changed, I'll check it.

You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk

shamelin73 said:
You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Even though it's not a Dev edition?

Yes you should be able too.
Sent from my XT1053 using Tapatalk

danman421 said:
Even though it's not a Dev edition?
Click to expand...
Click to collapse
All XT1053s can be unlocked, yes. Additionally, if you follow my advice, you don't NEED to unlock. If one of the commands fails, simply skip to the next as I previously advised, and TRY flashing with RSD Lite after you have run the commands I listed.
If you want to check and make sure fastboot is working, type:
fastboot devices
if you see your phone and it's serial number listed, you fastboot IS properly communicating with your phone.
You do not need to unlock your BL to do any of this...but if you are interested in ROOTING, you will need to.

All I really want to do is make it so my phone can take the update and any future updates. What do you mean as you previously stated?

shamelin73 said:
You should be able to unlock the boot loader but will not have warranty.
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
I tried this as I did before and I get "your device does not qualify for bootloader unlocking". All I need to know is how to fix this from someone.

danman421 said:
All I really want to do is make it so my phone can take the update and any future updates. What do you mean as you previously stated?
Click to expand...
Click to collapse
I confused you with a member I had helped previously - sorry. Please disregard the "previously stated" comment.
danman421 said:
I tried this as I did before and I get "your device does not qualify for bootloader unlocking". All I need to know is how to fix this from someone.
Click to expand...
Click to collapse
It does NOT require unlocking the bootloader to flash your carrier's correct ROM. Simply follow the instructions in the "Return to 100% Stock" thread to flash the XT1053 ROM, and you'll be able to take all future updates.
If you DO unlock the bootloader, flash custom recovery, and root your device, you will have to un-do any modifications made before EVERY OTA. If you don't care about root, don't worry about unlocking.
Additionally, if you DO want to unlock, you could try a different browser and make sure you are inputting the unlock data correctly. It is recommended that you copy the unlock data from the command prompt to notepad, remove all spaces and bootloader messages (you ONLY want the code - as one complete string), then copy from notepad into the Unlock website.
And finally, keep in mind that unless you unlock your BL, you will not be able to root and disable write-protect once you update to the latest version.
The real problem here is that you use an "Exploit" to root your device previously. Now you need to return to full stock to restore your partitions to their factory state.
Simply follow the instructions in the Return to stock thread (in general sub-forum), and be sure to flash the LATEST version for your carrier. It should be 4.4.3.
Good Luck.

samwathegreat said:
I confused you with a member I had helped previously - sorry. Please disregard the "previously stated" comment.
It does NOT require unlocking the bootloader to flash your carrier's correct ROM. Simply follow the instructions in the "Return to 100% Stock" thread to flash the XT1053 ROM, and you'll be able to take all future updates.
If you DO unlock the bootloader, flash custom recovery, and root your device, you will have to un-do any modifications made before EVERY OTA. If you don't care about root, don't worry about unlocking.
Additionally, if you DO want to unlock, you could try a different browser and make sure you are inputting the unlock data correctly. It is recommended that you copy the unlock data from the command prompt to notepad, remove all spaces and bootloader messages (you ONLY want the code - as one complete string), then copy from notepad into the Unlock website.
And finally, keep in mind that unless you unlock your BL, you will not be able to root and disable write-protect once you update to the latest version.
The real problem here is that you use an "Exploit" to root your device previously. Now you need to return to full stock to restore your partitions to their factory state.
Simply follow the instructions in the Return to stock thread (in general sub-forum), and be sure to flash the LATEST version for your carrier. It should be 4.4.3.
Good Luck.
Click to expand...
Click to collapse
So if I am reading this correctly, there is no way to keep all of my data and take the update?

danman421 said:
So if I am reading this correctly, there is no way to keep all of my data and take the update?
Click to expand...
Click to collapse
You can attempt to, by either editing the XML in the SBF and removing the line that says "erase userdata", or by skipping the erase userdata if you use the manual method, but either way CAN mess everything up.
You used an EXPLOIT previously. Any time you use an exploit, you should -expect- to have to wipe everything and re-install from scratch if you want to get back to stock in order to be able to take updates. Keep this in mind if you use any exploits in the future.

Hi! This hasn't seemed to spelled out yet..... But many Moto x's can be unlocked, not just dev editions. However, you stated in the opening post that you have a Verizon Non dev, which can not be unlocked. Only way is to pay the "China middleman" (See thread in general with that name).
And personally.... I would stay on 4.2.2 and do the Slapmymoto method to get root and write protection disabled. That is the best root scenario, aside from unlocking the bootloader.
If you update to 4.4.2 or higher, you will have write protection enabled always, and no root, or sorta root with towelroot and pie. But that will limit what you can do.
See the How do I root my phone sticky thread in general for your options.

I should have posted earlier. I ran RSDLite and put the newest version on. I am unrooted. My Moto X is a Sept '13 version the the middleman probably wont work anyways. Its not worth it with this phone, im tired of the rooting, I guess im at that point in my life... Thanks for all your help though guys!

danman421 said:
I am running a Verizon Moto X still on 4.2.2. I am rooted. This is NOT the Dev edition. I have plenty of experience with rooting/flashing these phones so back when I first got it the directions on rooting/flashing roms was VERY vague. No one specified you needed the Dev edition to unlock the boot loader. Well I think this came from at one point when I tried to flash TWRP (maybe). Either way, I want to take the OTA update and cannot. Does anyone know how to fix this without doing the RSD, reflash stock method? Here is a picture of what it looks like (thanks for your help in advance):
Click to expand...
Click to collapse
Pardon my jumping in here late but..
I see a big issue here.
Based on that screen shot, you have boot loader 30.B4, that is NOT the bootloader that comes wtih 4.2.2. Did you mean to type 4.4.2? or do you really have 4.2.2 on there?
If you really had 4.2.2 on your phone with a 30.B4 bootloader, then you had 4.4.2 on there at one point, and downgraded!! You need to be REALLY CAREFUL or you will brick your phone.

You are correct, I was on 4.4.2. My wife's S4 that I just upgraded was on 4.2.2. Sorry for the confusion.

KidJoe said:
Pardon my jumping in here late but..
I see a big issue here.
Based on that screen shot, you have boot loader 30.B4, that is NOT the bootloader that comes wtih 4.2.2. Did you mean to type 4.4.2? or do you really have 4.2.2 on there?
If you really had 4.2.2 on your phone with a 30.B4 bootloader, then you had 4.4.2 on there at one point, and downgraded!! You need to be REALLY CAREFUL or you will brick your phone.
Click to expand...
Click to collapse
Good catch! ?
OP... Perhaps full disclosure of what you have done on the phone would help.
Or is that how it was?
If it's been downgraded to 4.2.2 after being on 4.4.2... As said above.... You could brick now... Especially if you OTA.
I'd tread lightly at this point.

danman421 said:
You are correct, I was on 4.4.2. My wife's S4 that I just upgraded was on 4.2.2. Sorry for the confusion.
Click to expand...
Click to collapse
so based on post # 14 of this post... it appears you are all good now? is that the case? Or do you still need help?
Oh, and if your bootloader is locked (Verizon non-DE), you can't get code from China Middle man, and you are on 4.4.2, you could try TowelPieRoot for rooting, but write protection is enabled so it will be kind of limited (compared to SlapMyMoto/MotoWPNoMO or if you had an unlocked bootloader), and there is no root for 4.4.4.

Yes, that was a good catch. What I did was RSD Lite to 4.4.4 now which reset all my data.

KidJoe said:
so based on post # 14 of this post... it appears you are all good now? is that the case? Or do you still need help?
Oh, and if your bootloader is locked (Verizon non-DE), you can't get code from China Middle man, and you are on 4.4.2, you could try TowelPieRoot for rooting, but write protection is enabled so it will be kind of limited (compared to SlapMyMoto/MotoWPNoMO or if you had an unlocked bootloader), and there is no root for 4.4.4.
Click to expand...
Click to collapse
Correct, I do not need help anymore but thank you.

[Q] Locking & Unlocking Moto X 2013

Hey Folks,
I was curious to know if you have unlocked your bootloader, and then locked it again via fastboot oem lock command, if you wanted to unlock the bootloader maybe in the distant future again, would you need to use the same unlock key that was given to you by moto?
Thanks!

alternetconcept said:
Hey Folks,
I was curious to know if you have unlocked your bootloader, and then locked it again via fastboot oem lock command, if you wanted to unlock the bootloader maybe in the distant future again, would you need to use the same unlock key that was given to you by moto?
Thanks!
Click to expand...
Click to collapse
Yes the one you got in your mail.
Take care not to lose it.
I am not sure if they give it again

adity said:
Yes the one you got in your mail.
Take care not to lose it.
I am not sure if they give it again
Click to expand...
Click to collapse
Ah okay great.
Thank you!

I've unlocked my bootloader but have never once considered relocking it. Why would you lock it after unlocking it in the first place? I can't think of a single benefit.

nhizzat said:
I've unlocked my bootloader but have never once considered relocking it. Why would you lock it after unlocking it in the first place? I can't think of a single benefit.
Click to expand...
Click to collapse
I've seen some people claim they want to be as "close to stock as possible" when selling their phone. Unfortunately it doesn't really make a difference.
There are 3 states for the 2013 Moto X bootloader:
LOCKED Status:0
Unlocked Status:3
Locked Status:2
note: Status 2 is also known as relocked.
As users we can toggle it to either Status 2 or Status 3, but we can never set it back to Status 0. On Status 2 or 3, you'll get the Bootloader Unlocked warning message at reboot (where replacing the LOGO.BIN with custom one will hide the message).

alternetconcept said:
Hey Folks,
I was curious to know if you have unlocked your bootloader, and then locked it again via fastboot oem lock command, if you wanted to unlock the bootloader maybe in the distant future again, would you need to use the same unlock key that was given to you by moto?
Thanks!
Click to expand...
Click to collapse
Have you managed to lock it?

alexhdkn said:
Have you managed to lock it?
Click to expand...
Click to collapse
I didn't actually. I just tried right now but got the following message.
(bootloader) FAIL: Please run fastboot oem lock begin first!
The reason I wanted to re-lock it was for purposes of my phone getting stolen. I'm assuming if it was relocked, the person wouldn't get the joy of installing a custom recovery.
Yeah kind of silly. In any case, couldn't get it to lock.

alternetconcept said:
I didn't actually. I just tried right now but got the following message.
(bootloader) FAIL: Please run fastboot oem lock begin first!
The reason I wanted to re-lock it was for purposes of my phone getting stolen. I'm assuming if it was relocked, the person wouldn't get the joy of installing a custom recovery.
Yeah kind of silly. In any case, couldn't get it to lock.
Click to expand...
Click to collapse
There is a process to re-lock which involves flashing the stock rom first, etc. and it does wipe the phone.
So if you re-lock, you'll also lose root. (at least until you unlock, flash custom recovery and root).

KidJoe said:
There is a process to re-lock which involves flashing the stock rom first, etc. and it does wipe the phone.
So if you re-lock, you'll also lose root. (at least until you unlock, flash custom recovery and root).
Click to expand...
Click to collapse
Yeah. I think I realized that I would need to wipe my phone again to re-lock it. I turned it back to stock so I can get the OTA which should hopefully come out soon.
I guess once they allow us to download stock 5.0.2, I'll do a re-lock then.
Thanks though for the info.

[Q] Android M flash

hello guys ) i just wanna ask if its possible to flash android m with nexus root toolkit or no ??

Apparently, yes. https://plus.google.com/113329792100896065459/posts/ZFUJD6Yn4hm

jj14 said:
Apparently, yes. https://plus.google.com/113329792100896065459/posts/ZFUJD6Yn4hm
Click to expand...
Click to collapse
thank you for the fast reply

Yes I followed those steps and flashed it perfectly.

BossJ said:
Yes I followed those steps and flashed it perfectly.
Click to expand...
Click to collapse
yeah same here, everything went more then well.

Should I relock the bootloader after flashing M ?

M5Rahul said:
Should I relock the bootloader after flashing M ?
Click to expand...
Click to collapse
NOOO!!!!
To many folks have encountered an issue that soft-bricked their device afterwards.
You will still receive OTA with an unlocked bootloader.

M5Rahul said:
Should I relock the bootloader after flashing M ?
Click to expand...
Click to collapse
you can relock it (safer) but if you want to flash any new rom later you will loose all your data. cause everytime you flash you need to unlock the bootloader. its up to you

stricker said:
you can relock it (safer) but if you want to flash any new rom later you will loose all your data. cause everytime you flash you need to unlock the bootloader. its up to you
Click to expand...
Click to collapse
Hang on now, lets be clear about the advice that we're giving here.
Yes, a locked bootloader is safer if a thief were to get his hands on your device. However, locking the bootloader has a whole host of other problems linked to it. For example, if you end up in a boot loop with a locked bootloader because something breaks in the rom or kernel, if you have stock recovery, you can never unlock the bootloader again, without sending it for repair.
I would suggest people using experimental ROMs should keep their bootloader unlcoked to avoid this

danarama said:
Hang on now, lets be clear about the advice that we're giving here.
Yes, a locked bootloader is safer if a thief were to get his hands on your device. However, locking the bootloader has a whole host of other problems linked to it. For example, if you end up in a boot loop with a locked bootloader because something breaks in the rom or kernel, if you have stock recovery, you can never unlock the bootloader again, without sending it for repair.
I would suggest people using experimental ROMs should keep their bootloader unlcoked to avoid this
Click to expand...
Click to collapse
If I did lock the boot loader, can it not be unlocked again using NRT ? I'm wondering since this (Android M) is an official release from Google, there should be a way to unlock the Boot loader if someone wants to roll back to lollipop ... Am I wrong in this assumption ?
Sent from my Nexus 6 using Tapatalk

M5Rahul said:
If I did lock the boot loader, can it not be unlocked again using NRT ? I'm wondering since this (Android M) is an official release from Google, there should be a way to unlock the Boot loader if someone wants to roll back to lollipop ... Am I wrong in this assumption ?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
It's a security feature whereby if you do not have "enable OEM unlocking" set in the rom, you cannot unlock the bootloader. If you don't have it set, have stock recovery then have a rom that will not boot, you cannot set that, ergo cannot unlock the bootloader. If you're going to mess with exxperiemental previews, I would suggest not re-locking the bootloader.

danarama said:
It's a security feature whereby if you do not have "enable OEM unlocking" set in the rom, you cannot unlock the bootloader. If you don't have it set, have stock recovery then have a rom that will not boot, you cannot set that, ergo cannot unlock the bootloader. If you're going to mess with exxperiemental previews, I would suggest not re-locking the bootloader.
Click to expand...
Click to collapse
I just checked and the 'OEM unlocking' option is turned on under Dev Options.
So, can I unlock the bootloader and flash back to 5.1.1 ?
Sent from my Nexus 6 using Tapatalk

M5Rahul said:
I just checked and the 'OEM unlocking' option is turned on under Dev Options.
So, can I unlock the bootloader and flash back to 5.1.1 ?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
If you like.

[Q][Solved] Relocking the bootloader

Hey guys,
I am currently trying to get my Moto X back to stock and relock the bootloader. Not because I need to, but just because I want to. I have a retDe XT1092 which I have converted to a XT1095. Is there any way to get the phone back to software status official and relock the bootloader? It doesn't matter to me that Motorola does know that I was unlocked before, I just want to relock it. I hope you guys can help me.

May I ask why you want to relock it? There really is no benefit to relocking it. :/
Anyway the command is:
fastboot oem lock
Sent from my XT1095

I know, but want to keep myself from flashing on this phone. I am trying to get away from rooting on non-nexus phones.
Yeah I've tried that multiple times, but as long as your software status isn't official the oem lock will fail. I'd guess this happens because most images you can download are not signed images.

Is your phone still converted to 1095? If so that is why lock wont work.
You would have to flash back the 1092 de image to be unmodified.
Sent from my XT1095

Okay good to know. I thought this wouldnt matter. But are there even any existing official images for the 1092?

Moto x firmwares:
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095

These aren't official. I've already tried them. If you flash those you won't be able to relock the bootloader. This is the reason why I opened this thread because I don't know any way of accomplishing my goal.

Bl4ckX said:
These aren't official. I've already tried them. If you flash those you won't be able to relock the bootloader. This is the reason why I opened this thread because I don't know any way of accomplishing my goal.
Click to expand...
Click to collapse
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.

juliospinoza said:
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.
Click to expand...
Click to collapse
His is retde. And these are official, they are leaks from motorola.
Sent from my XT1095

juliospinoza said:
One thing is official and other thing is carrier, and I think you need the firmware of your carrier, the one who came with your phone before the flashing. Maybe if you tell us we can find it for you.
Click to expand...
Click to collapse
I was able to get the signed firmware from motorola, You have to start with fastboot oem lock begin and then flash. After flashing you use the fastboot oem lock and the bootloader will relock, however, you will still get the unlocked warning message. You will have to flash the modified logo.bin to make it go away.

AGISCI said:
His is retde. And these are official, they are leaks from motorola.
Sent from my XT1095
Click to expand...
Click to collapse
If you are so convinced that these are official I am willing to try them out but I am pretty sure they aren't
strafer69 said:
I was able to get the signed firmware from motorola, You have to start with fastboot oem lock begin and then flash. After flashing you use the fastboot oem lock and the bootloader will relock, however, you will still get the unlocked warning message. You will have to flash the modified logo.bin to make it go away.
Click to expand...
Click to collapse
This doesn't sound right. Using oem unlock begin the phone will check if each and every image is signed. You shouldn't be able to flash a modified logo.bin and the message should actually go away by itself. Are you sure your relock attempt didn't fail?

Bl4ckX said:
If you are so convinced that these are official I am willing to try them out but I am pretty sure they aren't
This doesn't sound right. Using oem unlock begin the phone will check if each and every image is signed. You shouldn't be able to flash a modified logo.bin and the message should actually go away by itself. Are you sure your relock attempt didn't fail?
Click to expand...
Click to collapse
I am 100% sure they are official because they are signed by motorola. If they were not official they wouldn't have motorola's signature.
Sent from my XT1095

AGISCI said:
I am 100% sure they are official because they are signed by motorola. If they were not official they wouldn't have motorola's signature.
Sent from my XT1095
Click to expand...
Click to collapse
I am currently downloading the XT1092 retDe image. I will report back in 6hours when I am back from work and this damn free download is finished. It takes forever..

The bootloader unlocked message would be a signed Motorola image since it is shipped with the phone. The bootloader essentially has a toggle that would switch between the normal and the unlocked message. I assume the toggle just doesn't get switched back when you OEM lock. It's not like he flashed a different custom logo or anything.
Sent from my Moto X 2014 Pure Edition using Tapatalk

Correct. You will notice the status message when you enter the bootloader there is a status code. 1=LOCKED 2=RELOCKED and 3=UNLOCKED. Once you unlock the bootloader, you can never go back to status 1 again and you will always get the bootloader unlocked message. If you read the message it states that the bootloader HAS been unlocked. There is a counter trigger in the phone telling it how many times it has been unlocked. When I had my old Galaxy S2 Skyrocket I remembered a program that would "RESET" this counter, but I do not believe one exists for Motorola. Once you unlock your bootloader there is no going back.
http://i5.androidxda.com/main/Motorola_Bootloader_Warning.png

Yeah I know about this relocked state, but it doesn't matter as I don't want to RMA the phone. I just want it locked but I wasn't able to accomplish a successful oem lock and I am now searching for a way to do so.
Edit: So this morning after the download had finished I brought my X to fastboot mode. And for whichever reason the software status was set to official even on the XT1095 image. I would have sworn that this wasn't the case when I flashed it and I have no idea why it changed. And a big thanks to you @AGISCI after typing "fastboot oem lock begin" I could flash the Image you linked here and software status stayed official and I was even able to relock the bootloader. So I simply must have had wrong images in the past, because I did entirely the same process I did now, 3 times already and it didn't work out at all.
So thanks again guys. The only annoyance is that I can't get rid of the bootloader unlocked message. This one seems to stay.

Relock Droid Turbo Bootloader

What's the process for going about it? I did do a search, but didn't find anything useful. Any help would be appreciated.
Reasoning: I'm going to be upgrading and turning in the phone, so it's time to put it back to factory.

mlw4428 said:
What's the process for going about it? I did do a search, but didn't find anything useful. Any help would be appreciated.
Reasoning: I'm going to be upgrading and turning in the phone, so it's time to put it back to factory.
Click to expand...
Click to collapse
1. Go back to stock everything by following section 0 of this guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
2. While in bootloader mode, use the fastboot command "fastboot oem lock"
If you're turning in the phone to Verizon, this method is okay. However, don't do this if you plan on selling the phone to someone else. If they were to try and unlock the phone again, they would most likely brick it.

According to jcase relocking the bootloader it still shows a modified status code. Your warranty is permanently voided.

Are you on an Edge plan? Otherwise I don't know why you would be returning the phone to upgrade. Also not sure what their rules are on permanently modifying the software of one of these essentially "lease-to-own" devices, so might want to check the terms and conditions if this applies to you. If you are just trading it in for credit toward a new phone, I'd just sell it yourself unlocked and get a lot more for it.
Sent from my XT1254 using Tapatalk

SpyderPride said:
If you are just trading it in for credit toward a new phone, I'd just sell it yourself unlocked and get a lot more for it.
Click to expand...
Click to collapse
A bootloader unlocked, rooted XT1254 would be more valuable to a buyer than one locked down. You've already done all the hard work.

TheSt33v said:
1. Go back to stock everything by following section 0 of this guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
2. While in bootloader mode, use the fastboot command "fastboot oem lock"
If you're turning in the phone to Verizon, this method is okay. However, don't do this if you plan on selling the phone to someone else. If they were to try and unlock the phone again, they would most likely brick it.
Click to expand...
Click to collapse
Heya so I'm in a serious bind.
I skipped your step 1 and locked my bootloader. I have an unlocked bootloader. I recently upgraded through the normal verizon pushed update the marshmallow update. Anyhow. I now want to return the phone for an upgrade and well... I locked the bootloader. Then turn the phone off and turned it back on and it now says locked, but it says failed to validate system image. I then got freaked out and downloaded all the step 1 files and tried to flash the stock rom (which i already had installed!) and that doesn't seem to work. Did I brick my phone? Is there any way to get it working now that it is locked with any kind of android at all?

You're probably fine @droidfun1. You just need to use the marshmallow firmware package instead of the lollipop one. Get it here: https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3531571

Yup, I tried flashing the stock 6.0.1 rom with fastboot on my mac but I got all kinds of fails.
I found a mac compatible command line version of RSDLite and it totally worked! Not sure why fastboot couldn't successfully flash the same stock rom?
Now I just need to remove the bootloader unlocked warning (my phone is now locked status 2), but not sure if I can now that it is locked.
TheSt33v said:
You're probably fine @droidfun1. You just need to use the marshmallow firmware package instead of the lollipop one. Get it here: https://forum.xda-developers.com/dr...-official-stock-firmware-6-0-1-mcg24-t3531571
Click to expand...
Click to collapse

droidfun1 said:
Yup, I tried flashing the stock 6.0.1 rom with fastboot on my mac but I got all kinds of fails.
I found a mac compatible command line version of RSDLite and it totally worked! Not sure why fastboot couldn't successfully flash the same stock rom?
Now I just need to remove the bootloader unlocked warning (my phone is now locked status 2), but not sure if I can now that it is locked.
Click to expand...
Click to collapse
Strange. As far as I understand it, RSDlite just automates fastboot, so even if you're using RSDlite, you're actually using fastboot. Whatever works though.
As for the unlocked bootloader message, see my response to that post you made.