pls help, phone stuck in initial screen - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

i was installing cwm and now when i switch on the phone, i'm stuck on the initial black/white screen with samsung s advance i9070 showing. i can go into download mode but not recovery.

In Download Mode you must have only ... Download Mode.
Flash again stock jelly Bean with Odin, if you can enter in DM.

R_a_z_v_a_n said:
In Download Mode you must have only ... Download Mode.
Flash again stock jelly Bean with Odin, if you can enter in DM.
Click to expand...
Click to collapse
is this what you mean... http://forum.xda-developers.com/showthread.php?t=2198341
A) JELLYBEANIZATION:
Download Odin3 from here. http://forum.xda-developers.com/atta...1&d=1341114315. Extract it into a folder.
Download Stock JB firmware from here. http://hotfile.com/dl/222710569/1f2e...86223.zip.html . Extract it into a separate folder, you will get a .tar.md5 file.
Make sure you have Kies installed, but not running.
Turn your phone off, and boot into Download mode, this can be done by holding the Vol.Down+Home+Power buttons together at the same time, till it boots.
Press Volume up to continue. Plug in your phone (make sure it's at least 60% charged) . Wait till Odin recognizes (It should say something like COMORT... to the left).
Click on PDA and choose the firmware (.tar.md5) that you extracted in step 2. Click start.
Right now, a virus which will fry your phone's internals is being installed... Calm down, joke.
When your phone boots into JB, and Odin says "PASS". Unplug.

gvmsia said:
is this what you mean... http://forum.xda-developers.com/showthread.php?t=2198341
...
Click to expand...
Click to collapse
Yes.

R_a_z_v_a_n said:
Yes.
Click to expand...
Click to collapse
thanks. the 1st link to odin works but the 2nd link to stock JB firmware doesnt. http://hotfile.com/dl/222710569/1f2e...86223.zip.html
is there anywhere else i can get it?

gvmsia said:
is there anywhere else i can get it?
Click to expand...
Click to collapse
Search on sammobile or samsung updates
Here http://www.sammobile.com/firmwares/ or here http://samsung-updates.com/

R_a_z_v_a_n said:
Search on sammobile or samsung updates
Here http://www.sammobile.com/firmwares/ or here http://samsung-updates.com/
Click to expand...
Click to collapse
thanks. my country (malaysia) is not listed in either one. http://samsung-updates.com/device/?id=GT-I9070 which version can i use?
can i use the one on this page? http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s-advance-i9070.html

gvmsia said:
thanks. my country (malaysia) is not listed in either one. http://samsung-updates.com/device/?id=GT-I9070 which version can i use?
can i use the one on this page? http://honai-android.blogspot.com/2013/05/how-to-update-galaxy-s-advance-i9070.html
Click to expand...
Click to collapse
we hav the firmwares on devhost. find it here
http://forum.xda-developers.com/showthread.php?t=2110245

it's alive!! THANKS!!!:good::highfive:

Related

Galaxy mini 2 Bricked

So I tried to install a rom and every thing went fine. I rebooted my phone via clockworkmod and then it shows me the logo of Galaxy mini 2 and the screen gets whiter and whiter. I tried going back to CWM but it wont open the only thing i can do is go to download mode.
So if somebody coud help me i would appreciate it.
Have you tried reflashing stock?
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
TheWhisp said:
So are we now creating new topic for every brick? I had the same problem, it's a brick. What did you do?
Click to expand...
Click to collapse
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
easy
MINI 2 said:
Sorry I didnt know there was a topic already made. I accidently flashed with CWM a rom that was not made for galaxy mini 2. So is there a way to unbrick it using odin?
Click to expand...
Click to collapse
go into download mode and flsh stock rom via odin
did you flash the trebon build ? If so, you should be able just to reflash with odin
TheWhisp said:
did you flash the trebon build ? If so, you should be able just to reflash with odin
Click to expand...
Click to collapse
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
Download a rom from sammobile for GT-S6500(D or whatever) then download odin3 put ur phone in DL mode press power vol down and home
Install kies and reboot pc
Open Odin3 go to PDA and select the file u downloaded
Press start and wait
Sent from my GT-S6500D using xda app-developers app
MINI 2 said:
Yes i flashed the trebon build. Can somebody explain me how to flash roms with odin because i know only how to flash them with CWM?
Click to expand...
Click to collapse
You could follow my TUT here. xD
take the flashing guide part
Next time, please, check carefully what you're flashing.
Thank you all for your comments.
TheWhisp said:
Next time, please, check carefully what you're flashing.
Click to expand...
Click to collapse
Will do.
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
TheWhisp said:
How could you even flash it since the updater-script cancels installation if the device name/model number is not in the list?
Click to expand...
Click to collapse
Idk, i downloaded it and installed with CWM 6.0.2.8. I havent had any error or warning.
If you can access the Download Mode flash the stock firmware.. mine can't even acces the Download Mode even with USBJig, it still shows a white line..
he had a soft brick, you had a hard brick.. take it to the service center
This should be posted in Q n A not in Android Development.
then report it...posting there is waste of time...since most or all of mini 2 users are here...

[Q] downgrade JB to 2.36 taiwan can't boot

my samsung GT-I9070 i was flash this firmware I9070ZSLK3_I9070OZSLK3_I9070ZSLK3_HOME.tar.md5 via odin in pda
and then reset and after reset i can't turn on my phone
:crying:
-help me i love it so much
srongchhunsry said:
my samsung GT-I9070 i was flash this firmware I9070ZSLK3_I9070OZSLK3_I9070ZSLK3_HOME.tar.md5 via odin in pda
and then reset and after reset i can't turn on my phone
:crying:
-help me i love it so much
Click to expand...
Click to collapse
you can't directly go to gb with this way.if you can go to download mode flash jb again it will be back.and downgrade it with the way exists in general forum but if you can't go download mode you bricked it and go to service centers.
srongchhunsry said:
my samsung GT-I9070 i was flash this firmware I9070ZSLK3_I9070OZSLK3_I9070ZSLK3_HOME.tar.md5 via odin in pda
and then reset and after reset i can't turn on my phone
:crying:
-help me i love it so much
Click to expand...
Click to collapse
1. Find guide thread about that, it is sticky.
2. Follow its content.
shut_down said:
1. Find guide thread about that, it is sticky.
2. Follow its content.
Click to expand...
Click to collapse
do you think, can be repair!!!??
srongchhunsry said:
do you think, can be repair!!!??
Click to expand...
Click to collapse
If you can go to download mode, I think that can fix it.
I couldn't boot once when I accidentally flash GB instead of new JB version. It couldn't boot, and go to recovery. Just downlaod mode. So I flashed JB again, and all was ok. I think it will be ok when you use guide for going back to GB now.

Downgrade from 4.2.2 to 2.3 or 4.1!?

Dear all.
Any idea on how to downgrade from 4.2.2 Custom firmware to 4.1 or 2.3 stock firmwares?
hassanayoub85 said:
Dear all.
Any idea on how to downgrade from 4.2.2 Custom firmware to 4.1 or 2.3 stock firmwares?
Click to expand...
Click to collapse
ODIN to the rescue.
How to use it to downgrade?
Why don't you 'search'?
And fyi there is a thread, I think in general forum, on how to upgrade or downgrade. Check that out.
And please click Thanks if I helped you!
hassanayoub85 said:
How to use it to downgrade?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
REgards !
That method is only for original firmware and not from custom 4.2.2
Then flash stock JB and after you can downgrade, right?
Powered by CM10.1
R_a_z_v_a_n said:
Then flash stock JB and after you can downgrade, right?
Powered by CM10.1
Click to expand...
Click to collapse
After installed the custom 4.2.2 no download mode available, and the odin dont recognise the mobile.
hassanayoub85 said:
After installed the custom 4.2.2 no download mode available, and the odin dont recognise the mobile.
Click to expand...
Click to collapse
Install a Cocore Kernel, then flash a stock based rom, or reboot on download mode if has the option
Sorry my English
Regards!
Didnt worked, still oding cant recognise it to install original stock firmware
So it should be about your PC drivers.Uninstall and re-install latest drivers or you can install crappy Kies it will install too
Thanks all guys.
The Phone is on Download Mode now, and Odin recognised my phone.
And the 2.3.6 version is uploading now, and seems it is solved.
Thanks alot.
Hi..
i was downgrading to GB on my device I9070 it showed pass in odin.. and when it restarted it just stuck on the device name on the screen(start screen)
I tried to enter the download mode to re install the OS but now my phone isnt detected.. while in download mode..
also did a reinstal of drivers and also kies... nothing helped.. but my other galaxy device connected (I9103)
please help.
akshayprbhu said:
Hi..
i was downgrading to GB on my device I9070 it showed pass in odin.. and when it restarted it just stuck on the device name on the screen(start screen)
I tried to enter the download mode to re install the OS but now my phone isnt detected.. while in download mode..
also did a reinstal of drivers and also kies... nothing helped.. but my other galaxy device connected (I9103)
please help.
Click to expand...
Click to collapse
Which method you use at downgrading ? Did you use pit file and did you check re-partition on Odin ?
Darkness and Hope said:
Which method you use at downgrading ? Did you use pit file and did you check re-partition on Odin ?
Click to expand...
Click to collapse
no.. i didnt check the re-partition nor i used .pit file.. only the pda in which i had loaded the stock GB rom downloaded from sammobile
akshayprbhu said:
no.. i didnt check the re-partition nor i used .pit file.. only the pda in which i had loaded in stock GB rom downloaded from sammobile
Click to expand...
Click to collapse
That's why you have issues with it.Downgrading have different method you should use pit file and check re-partition, you can't downgrade with a stock GB.
There's a thread in our i9070 forum.Use the given files in the thread maybe PC can recognize your phone.
Darkness and Hope said:
That's why you have issues with it.Downgrading have different method you should use pit file and check re-partition, you can't downgrade with a stock GB.
There's a thread in our i9070 forum.Use the given files in the thread maybe PC can recognize your phone.
Click to expand...
Click to collapse
well... one forum said use pit files.. another said no need.. installed the drivers twice.. tried all that i came so far.. no fruit.. will be going to service center tomorrow.. the last hope that i have..
akshayprbhu said:
well... one forum said use pit files.. another said no need.. installed the drivers twice.. tried all that i came so far.. no fruit.. will be going to service center tomorrow.. the last hope that i have..
Click to expand...
Click to collapse
Nope dude you must use given files on the thread.Use Odin3 v1.85 for process not 3.07.
Anyway here link or go to the service center.

Big issue after firmware update try

Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
arnouf said:
Hello,
I've a "non commercial" version of a GTab 8.9.
This tab is running by default Android 3.1. I would like to update to Android 4.0.4. Kies doesn't want indicating my tablet doesn't support the update (i don't know it was 4.0.4 version or another)
I tried to use the standard : Odin + the new firmware. The tablet is unlocked and rooted.
Each time that I tried I get the error : "can't nand write" :-/ I tried all current stuff to fix this issue : change cable, PC, odin version (1.83, 1.85, 3.07, 3.09). I tried to change recovery with succss
but impossible to change rom. I found a link on tsar dot com (sorry I'm too young here to post link) to reformat tab and I put the pit file : this has worked....but now : i can't access to the recovery. I can only open the download mode...but I can't do anything and I don't have others files described ont the following link
XDA's guy are ones to save me !!
thanks by advance (sorry for my poor english)
Click to expand...
Click to collapse
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
omarainea said:
I didn't quite understand everything, but I'll provide you every link you need to fix this
and if I forgot something or you need anything, feel free to ask for
now here are links for some absolutely working files:
Samsung USB Driver For GT-P7300/GT-P7310 v1.5.5.0
Odin3 v1.85 For GT-P7300/GT-P7310
Samsung latest official GT-P7300 framework Tar for Odin
Samsung latest official GT-P7310 framework Tar for Odin
Samsung latest official GT-P7320 framework Tar for Odin
ClockworkMod Recovery v5.5.0.4 Odin Tar File For GT-P7300/GT-P7310
Team Win Recovery Project v2630 Odin Tar File For GT-P7300 & GT-P7310
all you have to do is to flash your tab's ROM [chose the link in regard of your tab's model number (p7300,p7310,p7320)]
and then flash your prefered recovery
Click to expand...
Click to collapse
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
arnouf said:
Thanks for your reply. I tried this first but it didn't work because when I want "start" with the good firmware (7300), the md5 check works but that's all. When odin want write boot.img or other file, i get an error "Can't write" and odin stops.
As this method didn't work I try with the tsar dot com solution. Hoping that's can help me.
Thanks a lot.
Click to expand...
Click to collapse
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
omarainea said:
ok if this is the same file you tried, you should try to flash another one Previous official framework for P7300
Click to expand...
Click to collapse
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
arnouf said:
Ok I'm going to try. But I think it's going to fail.... the reason is the Nand seems block or something like that.
I download file, test and I'll give you a feed back. Thanls for your help.
Click to expand...
Click to collapse
Or your nand is really broken
I've a similar issue in /data partition (it can't be writtable after a try to flash with Odin from a virtual machine) and I fixed it with the PIT file to repartition, reflash stock firmware and then a wipe/factory reset from stock recovery (I think it did a format)...
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
arnouf said:
I try to put pit file. It's works as I told in my first post. But I can't flash the firmware with a standard stock rom (apparently). Can you tell me tools and roms that you used to fix the issue exaclty ?
Click to expand...
Click to collapse
I think the same as @omarainea have posted...
jolinnard said:
I think the same as @omarainea have posted...
Click to expand...
Click to collapse
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
arnouf said:
Poor guy I am ! After a pit file download with heimdall...My tab doesn't start, screen is still off, and I don't have information in charge....brick, brick, brick...
Click to expand...
Click to collapse
what did you do to break your device ??
omarainea said:
what did you do to break your device ??
Click to expand...
Click to collapse
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
arnouf said:
I think that I use incorrectly the heimdall sofware when I want to load the pit file. Messages said all was ok, I unplug the USB cable. I would like to reboot the tab and...black screen, impossible to restart....complete black screen
Click to expand...
Click to collapse
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
Click to expand...
Click to collapse
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
omarainea said:
I'm not familiar with heimdall tool but I know that it should be used with Galaxy S devices:
anyway, so now you can't enter download mode or recovery ??
if that so, then you have officially break your device:silly:
and the most recommended solution is to take your tab to a near Samsung store
and they'll fix it for you
Click to expand...
Click to collapse
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
arnouf said:
Apparently some guys use heimdall with P7300...
Yes the tab is really broken now !
Thanks for helps given by each guy here ! Thanks a lot.
Click to expand...
Click to collapse
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
jolinnard said:
What I remember is Heimdall doesn't work with my P7310 and it don't let me do anything.
Anyway, plug into a Windows machine running Odin 1.85 (I think this version it's fine) your tab, press 10 seconds UP and power button and see if your tab is detected. In that case try to flash stock package again.
Some time ago it happened to me with a Galaxy Ace phone, when phone is booting screen was off but the phone enters into download mode anyway and you could flash whatever you want.
A last shot for you could be disassemble your tab and pull off battery. Wait some minutes and then pull on again. Try to start in download mode with tab plugged into your computer. If you don't have enough knowledge to disassemble your tab (and I can assure you of that it's not easy) maybe you need to bring it to Samsung support.
Click to expand...
Click to collapse
Heimdall works for our tablets. I use it for P7300, for example.
DemonGloom said:
Heimdall works for our tablets. I use it for P7300, for example.
Click to expand...
Click to collapse
Ok, so I don't know what could happen when I tried it, I think last time was in 2012 or maybe early 2013...

i9506 Lolipop Official Samsung firmware 5.0.1

Hey guys! Samsung finally released Lollipop for international i9506!
It's available for few country sale codes:
Latest
GT-I9506 NEE Nordic I9506XXUDOD3 I9506NEEDOD4
Click to expand...
Click to collapse
Change list: 4723452 BUILD DATE: 17.04.2015
Download link
https://mega.co.nz/#!5Y8hlL6Y!Tr-DOZftNhrbJ2op0fhNBaE7C-pdXMRZo6xjGud866g
http://uploaded.net/file/o2j56wxd
http://rapidgator.net/file/dfd236558d8d456af12b749548781f98
Change list: 4260938 Build date 27.02.2015
GT-I9506 Greece I9506XXUDOB5 I9506EURDOB1
Click to expand...
Click to collapse
Download link
https://mega.co.nz/#!wd9V1ZQS!764e_J-sd6GrZ7sbSb-YLt_epH384zR9M6XJeMgFX5A
http://rapidgator.net/file/e53c2bfa66c94f6fed3a507c42ca4e3d
http://uploaded.net/file/wwrzlcba
https://www.wetransfer.com/download...758651c53716cfa5f8e4b77820150311203037/e400ae
GT-I9506 Czech I9506XXUDOB5 I9506OXXDOB1
Click to expand...
Click to collapse
https://mega.co.nz/#!RQ1H2KxQ!KeC8jK_Jc1VNNYkQtty2d3QWwFStUsADWDLjSbnDT7I
https://www.wetransfer.com/download...be278087d4f3161b98f9888420150312184703/e7a0c2
Change list: 4060099 Build date 30.01.2015
GT-I9506 Greece5.0.1 I9506XXUDOAAI9506EURDOB1
Click to expand...
Click to collapse
Download link
http://rapidgator.net/file/68fbf7b2fdca69bbed5f0326c3a641e1
http://uploaded.net/file/i5s8waad
https://mega.co.nz/#!RQtWCD5S!Neak_LiOMRtWgwGnm7i1vJU45YctaesRxd-ElUEemtw
Change list: 3875041 Build date 13.01.2015
GT-I9506Germany (Vodafone)5.0.1I9506XXUDOA6 I9506VFGDOA4
GT-I9506Czech Republic (Vodafone)5.0.1I9506XXUDOA6 I9506VFGDOA4
GT-I9506Czech Republic5.0.1I9506XXUDOA6 I9506OXXDOA1
GT-I9506Slovakia5.0.1I9506XXUDOA6 I9506OXXDOA1
GT-I9506Sweden (tre) 5.0.1I9506XXUDOA6I9506HTSDOA1
GT-I9506Nordic open5.0.1I9506XXUDOA6 I9506NEEDOA6
GT-9506 Austria (A1)5.0.1I9506XXUDOA6I9506VFGDOA4
Click to expand...
Click to collapse
Download links
http://live.samsung-updates.com/index.php?device=GT-I9506
http://www.sammobile.com/firmwares/database/GT-I9506/
For Slovakia only (ORX CSC)
https://mega.co.nz/#!5sEDBbxB!G7QAqzdstUxQxmbvF2VpOPoJtKUydH1L_I5SMXBdphk
infos:
http://www.sammobile.com/2015/02/06/android-5-0-lollipop-rolls-out-to-the-samsung-galaxy-s4-lte-a-gt-i9506/
Same thread in general section http://forum.xda-developers.com/galaxy-s4/general/official-lollipop-5-0-1-rolling-t3023312
Yeah, wrong section and I've misted it
Added Mega mirror link for Slovakia (csc orx)
After lollipop update, is possible to downgrade to official kitkat?
Taptalked
Very good gestion
Please people read DeHawk's section about upgrading and downgrading bootloaders. It is not so simply...
if kk and lollipop roms have the same bootloader, the downgrade is simple with stock rom with odin.
i need to know if anyone tryed it before i flash lollipop
I have installed the Czech Republic version with odin and everything seems to work fine.
judasjj said:
I have installed the Czech Republic version with odin and everything seems to work fine.
Click to expand...
Click to collapse
Wifi too ?
Sent from my GT-I9506 using XDA Free mobile app
Wifi works to
German have WIFI error
Developer.WL said:
German have WIFI error
Click to expand...
Click to collapse
i also had wifi error at first, flashed the rom 3 more times with odin and than wifi worked. :good:
the trick apparently is..
Just make sure you follow the sammobile instructions carefully, others have just loaded odin and flashed the rom and the modem etc. was left 'untouched'. So make sure you do the proper sequence e.g. download mode (its in the sammobile instructions).
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
These are the steps which i make
Reboot / Boot into download-mode?
Developer.WL said:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
These are the steps which i make
Click to expand...
Click to collapse
Not too sure about that part! It is actualy recommended that one should turn-off phone and then boot into download-mode rather than "reboot" into download-mode. The experts might give their two-cents on the mutter.
judasjj said:
Wifi works to
Click to expand...
Click to collapse
my wifi doesnt work on the German Firmware ,
how did you get yours to work?
lythro said:
my wifi doesnt work on the German Firmware ,
how did you get yours to work?
Click to expand...
Click to collapse
i have flashed the firmware about 3 times with odin and it worked ^-^
Wifi
breakingstorm said:
i have flashed the firmware about 3 times with odin and it worked ^-^
Click to expand...
Click to collapse
Nice i will wait for the update if there is
There's no wifi bug. You just have to turn off the device (no restart!!!) before going to download mode. Otherwise modem will stay untouched - from previous firmware causing wifi problems.
Wysłane z mojego GT-I9506

Categories

Resources