I think that my nexus 7 became more and more slow when installing new android updates. So I want to give it a try and flash a 4.1 rom, just for curiosity.. I can find older roms but I can't find older version of bootloaders. Is there any dedicated thread with older downloadable version of bootloaders? Can I extract those from factory images?
So far I learned that to downgrade I have only to flash an older bootloader and then the older rom. Is that correct? Thanks for the help.
Inviato dal mio Nexus 5 utilizzando Tapatalk
Bump
Inviato dal mio Nexus 7 utilizzando Tapatalk
Yes, you just need to flash bootloader, system and boot images via fastboot.. To get them just download the full 4.1 factory image from the official website
Inviato dal mio Xperia U utilizzando Tapatalk
Related
If I flash the cyano boot.img on stock ROM I can after boot in stock ROM with modify recovery and after make a backup of stock before flash cyano?
Inviato dal mio C6603 con Tapatalk 2
Install stock recovery to make your backup.
Before install cyano boot.img then?
Inviato dal mio C6603 con Tapatalk 2
RealBearTears said:
Before install cyano boot.img then?
Inviato dal mio C6603 con Tapatalk 2
Click to expand...
Click to collapse
dont do it you will soft brick the phone..
G1_enthusiast said:
dont do it you will soft brick the phone..
Click to expand...
Click to collapse
Ok thanks.
Inviato dal mio Nexus 7 con Tapatalk 2
RealBearTears said:
If I flash the cyano boot.img on stock ROM I can after boot in stock ROM with modify recovery and after make a backup of stock before flash cyano?
Inviato dal mio C6603 con Tapatalk 2
Click to expand...
Click to collapse
U will definitely brick just flash a recovery and never cross flash......
riflesnroses said:
U will definitely brick just flash a recovery and never cross flash......
Click to expand...
Click to collapse
Ok I understand the point, thanks. It's the same to flash rom from internal memory or sdcard external after flash recovery?
Inviato dal mio C6603 con Tapatalk 2
Thanks all finaly boot into cm10.1
Inviato dal mio Nexus 7 con Tapatalk 2
Hi, I have the SGS3 mini, and I opened this thread for an informazion (sorry mods if I wronged section move it in the right place). I'd like to ask the link of the last stock firmware (flashable through cwm) that is supported from an aosp theme, and a link for this one. And an other thing..is there a way to DE-samsungnize the Rom fastly? A flashable zip or something similar? Thanks in advantage, bye.
Inviato dal mio GT-I9505 utilizzando Tapatalk
alinghi100 said:
Hi, I have the SGS3 mini, and I opened this thread for an informazion (sorry mods if I wronged section move it in the right place). I'd like to ask the link of the last stock firmware (flashable through cwm) that is supported from an aosp theme, and a link for this one. And an other thing..is there a way to DE-samsungnize the Rom fastly? A flashable zip or something similar? Thanks in advantage, bye.
Inviato dal mio GT-I9505 utilizzando Tapatalk
Click to expand...
Click to collapse
You're posting in the wrong place. You shouldn't post here, you should post at s3 mini q&a, help and troubleshooting.
Waiting for a moderator I told it before
Inviato dal mio GT-I9505 utilizzando Tapatalk
Up?
Inviato dal mio GT-I9505 utilizzando Tapatalk
Right section but still waiting for an answer
alinghi100 said:
Right section but still waiting for an answer
Click to expand...
Click to collapse
have you perhaps taken the time to look at the various ROMs available?
there are a few that might have the look and feel you are looking for
Only stock but AOSP themed is Enox, but it has not been updated from may last year. So..... Maclaw's AOKP.
Do you say this? http://maclaw.pl/s3-mini
Last one ?? Cm 11 right?
Inviato dal mio GT-I9505G utilizzando Tapatalk
alinghi100 said:
Do you say this? http://maclaw.pl/s3-mini
Last one ?? Cm 11 right?
Inviato dal mio GT-I9505G utilizzando Tapatalk
Click to expand...
Click to collapse
No. That is CM. AOKP is here.
i've installed cm13 nightly today and after flash the rom i've flashed gapps but when i reboot the phone he loop it. i've tested without the gapps and the phone start it on boot. what could be the problem? thanks for helps
Try factory reset, clear dalvik and cache.
It's still new, so nobody can guarantee that it will actually work, nobody tests nightlies, but those who download them.
I've tried but is the same. Surely is a ROM problem. I will be wait next month for a stable ROM
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
I've tried but is the same. Surely is a ROM problem. I will be wait next month for a stable ROM
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
There are no official stable versions anymore (called snapshots), not for all versions (for shamu there isn't).
But for sure in a month it will be more stable.
CarefulThrone65 said:
i've installed cm13 nightly today and after flash the rom i've flashed gapps but when i reboot the phone he loop it. i've tested without the gapps and the phone start it on boot. what could be the problem? thanks for helps
Click to expand...
Click to collapse
If it boots without the gapps, try different gapps. I use http://opengapps.org/ 6.0 Stock on my personal CM 13 builds without issue.
These was the gapps that i've used. But nothing is changed
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
These was the gapps that i've used. But nothing is changed
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
Use the same one you use (557MB) and no problem whatsoever.
Which recovery you use?
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
Which recovery you use?
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
TWRP 2.8.7.1
The same that i use. I don't understand because happens only at me.
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
The same that i use. I don't understand because happens only at me.
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
Do you wipe everything besides the sdcard storage before you flash cm and gapps?
Yes i've do all wipe exept the sdcard for flashing the ROM because i haven't de otg cable.
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
Yes i've do all wipe exept the sdcard for flashing the ROM because i haven't de otg cable.
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
You might try re-downloading the gapps and the cm rom, one of them might be corrupted somehow.
When i can surely i will try to download the ROM. Now i remain with the cm 12.1.
Inviato dal mio Nexus 6 utilizzando Tapatalk
Could be a file system problem?
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
When i can surely i will try to download the ROM. Now i remain with the cm 12.1.
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
From what i xperienced so far CM13 is quite good, have no fear my friend (JK). Almost everything is fixable and help is near
Thanks for everythink ?
Inviato dal mio Nexus 6 utilizzando Tapatalk
CarefulThrone65 said:
Thanks for everythink
Inviato dal mio Nexus 6 utilizzando Tapatalk
Click to expand...
Click to collapse
You`re welcome
I've downloaded again the gapps and the rom and i've flashed their. Now the phone is started.
Inviato dal mio Nexus 6 utilizzando Tapatalk
Hi i have z3 compact d5803 with original firmware 23.4.a.1.264 and with lock bootloader. I want only root d5803 and install recovery TWRP, Where i can found guide?
Well it is pretty easy to do,basically you download Kingroot and Supersu-me,and you firstly root your phone with Kingroot and then you open up the Supersu-me app and it will remove Kingroot and it will put SuperSU,and then you just need to download XZDualRecovery and install it and that's it!
Dinkec27 said:
Well it is pretty easy to do,basically you download Kingroot and Supersu-me,and you firstly root your phone with Kingroot and then you open up the Supersu-me app and it will remove Kingroot and it will put SuperSU,and then you just need to download XZDualRecovery and install it and that's it!
Click to expand...
Click to collapse
Well, where I can find this app?
Inviato dal mio PRO 5 utilizzando Tapatalk
87Fra87 said:
Well, where I can find this app?
Inviato dal mio PRO 5 utilizzando Tapatalk
Click to expand...
Click to collapse
Where i can find guide?
Inviato dal mio PRO 5 utilizzando Tapatalk
87Fra87 said:
Well, where I can find this app?
Inviato dal mio PRO 5 utilizzando Tapatalk
Click to expand...
Click to collapse
Google "kingroot apk"
Dinkec27 said:
Well it is pretty easy to do,basically you download Kingroot and Supersu-me,and you firstly root your phone with Kingroot and then you open up the Supersu-me app and it will remove Kingroot and it will put SuperSU,and then you just need to download XZDualRecovery and install it and that's it!
Click to expand...
Click to collapse
Where i can find supersu-me apk?
Inviato dal mio PRO 5 utilizzando Tapatalk
87Fra87 said:
Where i can find supersu-me apk?
Inviato dal mio PRO 5 utilizzando Tapatalk
Click to expand...
Click to collapse
I think you can find it on the page on how to root the normal Z3 with a locked bootloader
Dinkec27 said:
I think you can find it on the page on how to root the normal Z3 with a locked bootloader
Click to expand...
Click to collapse
Can you post link here?
Inviato dal mio PRO 5 utilizzando Tapatalk
87Fra87 said:
Can you post link here?
Inviato dal mio PRO 5 utilizzando Tapatalk
Click to expand...
Click to collapse
Well I couldn't find the apk anymore so here is a guide on this link:
http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html
I have install kingroot, then I have try root but it don't work why?
Inviato dal mio PRO 5 utilizzando Tapatalk
87Fra87 said:
I have install kingroot, then I have try root but it don't work why?
Inviato dal mio PRO 5 utilizzando Tapatalk
Click to expand...
Click to collapse
I had to do it with king root desktop app (it is on chinese or something i dunno, i clicked all the blue buttons until i managed it to work). It all worked until I decided to reboot. Got stuck on a bootloop until i flashed the stock firmware again.
I need the stock firmware WAS-LX1AC02B113 to restore my Huawei p10 lite because it does not update anymore and reports an error in the installation. Please help me find this firmware.
Inviato dal mio WAS-LX1A utilizzando Tapatalk
There is no 113 firmware on FF there is 114 and higher you can use any.
gm007 said:
There is no 113 firmware on FF there is 114 and higher you can use any.
Click to expand...
Click to collapse
Thanks for having responded, i've already tried the b114 but the problem does not work after a hard reset i get the update ota B120 and when i start the installation fails and says the package is corrupt. I would need the stock firmware to reset the phone to factory conditions
Inviato dal mio WAS-LX1A utilizzando Tapatalk
1987yeah said:
Thanks for having responded, i've already tried the b114 but the problem does not work after a hard reset i get the update ota B120 and when i start the installation fails and says the package is corrupt. I would need the stock firmware to reset the phone to factory conditions
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
How are you trying to install?
Choose full firmware not ota.
Check if the firmware are approved before installing.
gm007 said:
How are you trying to install?
Choose full firmware not ota.
Check if the firmware are approved before installing.
Click to expand...
Click to collapse
I tried the full ota b114, the B115 and the B120 are not approved, but the odd thing is that after hard resetting, I get an update via Ota the B120, which if I try to install I'm out of this screen (photo Of example) and when I start the phone I will also see this screen
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Yes it seems you need the same firmware you have b113 to fix it.
You can try erecovery, while usb connected hold volume up + power.
Or use this methodhttps://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
But p10 lite not supported yet hope it will be soon.
gm007 said:
Yes it seems you need the same firmware you have b113 to fix it.
You can try erecovery, while usb connected hold volume up + power.
Or use this methodhttps://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
But p10 lite not supported yet hope it will be soon.
Click to expand...
Click to collapse
So without the b113 stock firmware I can install another version after unlocking the bootloader and should I fix the problem?
Inviato dal mio WAS-LX1A utilizzando Tapatalk
1987yeah said:
So without the b113 stock firmware I can install another version after unlocking the bootloader and should I fix the problem?
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
Yes you can with this tool.
Okay, but is it okay if firmware finder says it is not approved? So in theory could I also make the debrand with this method?
I could also use the Huawei Multi Tool that is compatible with the P10 Lite
Inviato dal mio WAS-LX1A utilizzando Tapatalk
1987yeah said:
Okay, but is it okay if firmware finder says it is not approved? So in theory could I also make the debrand with this method?
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Click to expand...
Click to collapse
Yes you can install any firmware with this tool even if it's not approved and you can rebrand to any region.
gm007 said:
Yes you can install any firmware with this tool even if it's not approved and you can rebrand to any region.
Click to expand...
Click to collapse
I tried to flash a version of Europe so no brand and unfortunately nothing happens I think I go into a kind of bootloop, I do not know if there is a specific firmware or it's all worthless and you have to wait for some other method, anyway I will try again Flash the latest update of my B120 brand
Inviato dal mio WAS-LX1A utilizzando Tapatalk
Ehy and what do you tell me about the oeminfo c432? However I tried to flash a couple of different European firmware and did not work, the only one that worked is the WAS-LX1AC02B114, I do not understand why
Inviato dal mio WAS-LX1A utilizzando Tapatalk