Database Develop

[Help]Cannot flash any Kernel (-Stock Kernel)

My Vivid is from AT&T, i have S-off and Unlocked bootloader. WCX Recover with Vivid Tools.
But any Kernel I flashed end with errors. And I can only use stock kernel for cooked rom
Here's my log file
AROMA INSTALLER version 2.00
(c) 2012 by amarullz xda-developers
ROM Name : KozmiKKernel
ROM Version : Beta 9
ROM Author : KozmiKKicK
Device : HTC Vivid (holiday)
Start at : Mon Jul 30 15:11:25 2012
-Checking Model ID
-Success!
-Model ID - HTC Holiday
-Ok to proceed
Welcome to KozmiKKernel by KozmiKKicK
Extracting files ...
Extract: /tmp/cmdline.sh
Extract: /tmp/compatibility.sh
Extract: /tmp/dd
Extract: /tmp/fastcharge.sh
Extract: /tmp/mkbootimg
Extract: /tmp/mkbootimg.sh
Extract: /tmp/modclean.sh
Extract: /tmp/reboot.sh
Extract: /tmp/scheduler.sh
Extract: /tmp/sweep2wake.sh
Extract: /tmp/unpackbootimg
Extract: /tmp/zImage
Deleting Old Modules...
about to run program [/sbin/busybox] with 3 args
about to run program [/tmp/modclean.sh] with 1 args
Copying thermald.conf
Copying post_boot.sh...
Copying ZRAM enabler...
Setting permissions...
Extract: /system/etc/init.d/90zram
Extract: /system/etc/init.qcom.post_boot.sh
Extract: /system/etc/thermald.conf
Running compatibility checks...
about to run program [/tmp/compatibility.sh] with 1 args
Pull the boot.img from your phone...
about to run program [/tmp/dd] with 3 args
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.608063 seconds, 26.3MB/s
Extract boot.img...
about to run program [/tmp/unpackbootimg] with 3 args
BOARD_KERNEL_CMDLINE ïÄ2À¬Tíx¿ViŒáÞV ¦wŘr ×u¢“œZ†KÚV…£%³ÿþ‡ï*
BOARD_KERNEL_BASE 9d0a8e97
PAGE_SIZE 411186307
Error: wrong pagesize: 411186307
run_program: child exited with status 1
Searching for this zip on the sdcard...
(this may take a few seconds)
about to run program [/tmp/cmdline.sh] with 1 args
sed: /tmp/boot.img-cmdline: No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
cat: can't open '/tmp/boot.img-cmdline': No such file or directory
Activating sweep2wake...
Deactivating HTC screenshot (PWR+HOME)...
(Use AOSP instead: Hold Vol.down+PWR for about a second)
about to run program [/tmp/sweep2wake.sh] with 1 args
Deactivating fastcharge...
about to run program [/tmp/fastcharge.sh] with 1 args
Setting chosen scheduler...
about to run program [/tmp/scheduler.sh] with 1 args
Repack boot.img with KozmiKKerneL &
changing the cmdline of the kernel...
Installing kernel...
about to run program [/tmp/mkbootimg.sh] with 1 args
cat: can't open '/tmp/boot.img-base': No such file or directory
usage: mkbootimg
--kernel <filename>
--ramdisk <filename>
[ --second <2ndbootloader-filename> ]
[ --cmdline <kernel-commandline> ]
[ --board <boardname> ]
[ --base <address> ]
-o|--output <filename>
run_program: child exited with status 1
Flashing New boot.img...
script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")
assert failed: write_raw_image("/tmp/newboot.img", "boot")
Installer Error (Status 7)
End at : Mon Jul 30 15:11:27 2012
Click to expand...
Click to collapse

You need to fastboot flash an insecure boot.IMG then you'll be set to flash whatever kernel you want in recovery.
I have a stock zip in the FAQs section of my kernel thread. Flash that and you should be set.
Sent from my HTC Holiday using xda premium

I already flashed your stock kernel and everything works fine with with customize roms. So plz tell me what's the next step

Might also wanna try a different recovery...I find that twrp recovery works best, I get problems with other ones...
Sent from my HTC PH39100 using Tapatalk 2

kozmikkick said:
You need to fastboot flash an insecure boot.IMG then you'll be set to flash whatever kernel you want in recovery.
I have a stock zip in the FAQs section of my kernel thread. Flash that and you should be set.
Sent from my HTC Holiday using xda premium
Click to expand...
Click to collapse
mg2195 said:
Might also wanna try a different recovery...I find that twrp recovery works best, I get problems with other ones...
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks u too, I flashed the boot.img in the Stock Kernel zip file then change to TWRP recovery, now it work

shokuhawan said:
Thanks u too, I flashed the boot.img in the Stock Kernel zip file then change to TWRP recovery, now it work
Click to expand...
Click to collapse
It may be resurrecting an old thread, but it saved me after the most recent ATT update to my HTC Vivid! Thanks!

MasterOfTheHat said:
It may be resurrecting an old thread, but it saved me after the most recent ATT update to my HTC Vivid! Thanks!
Click to expand...
Click to collapse
did you have that problem where ATT kept sending you an ota update and it would fail? im stuck on that and i really dont know what to do, any advice?

Boot Loop

Hallo,
I use since some months the ROM CROMi-X 6.1 on my tablet.
Yesterday suddenly became a black screen and if would restart he stuck on the ASUS bootlogo, a ****ing boot loop.
I try to restart the old ROM and the new CROMi-X, but nothing. The installation comleted, but i can't see any change.
And if I start in recovery he write something like could not mount /...cache ... or ... data
Could any one pls help me?
Thanks
:crying:

I can't flash a other recovery or something else.
This is my log from the installation.
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : CROMBi-kk
ROM Version : CM11-KitKat-4.4.4-20140714-DEODEX
ROM Author : sbdags/lj50036
Device : Asus Transformer TF701T
Start at : Wed Jul 16 09:41:55 2014
Thank you for installing CROMBi-kk KitKat 4.4.4!
Sit back and relax...
-----------------------------------------------------
This will take a few minutes!
Preparing File System.....
Extract: /tmp/fsck.ext4
Extract: /tmp/mkfs.ext4
Extract: /tmp/tune2fs.ext4
Backing up CM11 Addons.....
mount: failed to mount /dev/block/mmcblk0p1 at /system: Invalid argument
about to run program [/tmp/backuptool.sh] with 2 args
Not backing up files from incompatible version: 11
run_program: child exited with status 127
about to run program [/sbin/umount] with 2 args
about to run program [/sbin/umount] with 2 args
umount: can't umount /data: Invalid argument
run_program: child exited with status 1
Formatting System....
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
warning: wipe_block_device: Discard failed
Tuning System.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
Tuning Data - Journaling Enabled.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/UDA at /data: Invalid argument
Wiping Dalvik-cache.....
Wiping Cache.....
Installing Core System.....
Extract: /system/addon.d/50-cm.sh
Extract: /system/addon.d/blacklist
Extract: /system/app/Apollo.apk
Extract: /system/app/BasicDreams.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/BluetoothExt.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CMFileManager.apk
Extract: /system/app/CMWallpapers.apk
Extract: /system/app/Calculator.apk
Extract: /system/app/Camera2.apk
Extract: /system/app/CertInstaller.apk
Extract: /system/app/DSPManager.apk
Extract: /system/app/DeskClock.apk
Extract: /system/app/Development.apk
Extract: /system/app/DocumentsUI.apk
Extract: /system/app/DownloadProviderUi.apk
Extract: /system/app/Email.apk
Extract: /system/app/Exchange2.apk
Extract: /system/app/Galaxy4.apk
Extract: /system/app/Gallery2.apk
Extract: /system/app/HTMLViewer.apk
Extract: /system/app/HoloSpiralWallpaper.apk
Extract: /system/app/KeyChain.apk
Extract: /system/app/LatinIME.apk
Extract: /system/app/LiveWallpapers.apk
Extract: /system/app/LiveWallpapersPicker.apk
Extract: /system/app/LockClock.apk
Extract: /system/app/MagicSmokeWallpapers.apk
Extract: /system/app/NoiseField.apk
Extract: /system/app/PacProcessor.apk
Extract: /system/app/PackageInstaller.apk
Extract: /system/app/PhaseBeam.apk
Extract: /system/app/PhotoPhase.apk
Extract: /system/app/PhotoTable.apk
Installing Options.....
Kernel Preparation
- 10.26.1.18 CM11 Kernel
DPI Preparation
- 320 DPI
Extract: /tmp/upd-build-prop.sh
Resolution Preparation
- 2560x1600 res
Extract: /tmp/res-build-prop.sh
Boot Animations
- CROMBi-kk BLUE
Launcher
- Apex Launcher
Google Apps
- Google Core Libraries and Play Store
- Google Calendar
- Google Now and Voice Search
- Google Music
- YouTube
- Google Maps
- Google Mail
- Google Hangouts
- Google Plus
- Google TTS
- Google Ears
Misc Apps
- ES File Explorer
- AdAway installed
- Terminal Emulator
- Titanium Backup
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
- DropBox
Extract: /data/app/com.dropbox.android-1.apk
- CM11 Inverted BetterBean Blue Theme
Extract: /data/app/com.blackout1911.theme.BetterbeanThemeFree-1.apk
Installing CROMBi-kk System Tweaks.....
Extract: /tmp/crombikk-build-prop.sh
about to run program [/tmp/crombikk-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.propMisvwq': Read-only file system
sed: can't create temp file '/system/build.propITfIQ1': Read-only file system
sed: can't create temp file '/system/build.propOmKZV2': Read-only file system
/tmp/crombikk-build-prop.sh: line 6: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 7: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 8: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 9: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 10: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 11: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 12: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 13: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 14: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 15: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 16: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 17: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 18: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 19: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 20: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 21: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 22: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 23: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 24: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 25: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 26: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 27: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 28: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 29: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 30: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 31: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 32: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 33: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 34: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 35: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 36: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 37: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 38: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 39: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 40: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 41: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 42: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 43: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
Tweaks and Scripts
- Browser2RAM enabled
- Ad Blocker enabled
- Xposed App installed
Extract: /data/app/com.ceco.kitkat.gravitybox-1.apk
Extract: /data/app/com.e_vertise.dopa.phab7-1.apk
Installing build.prop
about to run program [/tmp/upd-build-prop.sh] with 1 args
/tmp/upd-build-prop.sh: line 2: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 3: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 4: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
about to run program [/tmp/res-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.prop6OKOeU': Read-only file system
sed: can't create temp file '/system/build.proppx4cD3': Read-only file system
sed: can't create temp file '/system/build.propShUKmO': Read-only file system
sed: can't create temp file '/system/build.propzZny5M': Read-only file system
sed: can't create temp file '/system/build.propGeSQmg': Read-only file system
run_program: child exited with status 1
Building symlinks.....
symlink: failed to symlink /system/bin/dump.f2fs to ../bin/fsck.f2fs: Read-only file system
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
Installer Error (Status 7)
End at : Wed Jul 16 09:42:26 2014

In your first post you talk about CROMi-X 6.1 (which is 4.3), but in your 2nd post you try to flash 4.4.4 which is CROMBi-kk I guess.
I think you need a full wipe going from the one to the other.

Yes this is a other try, the reinstall from 4.3 was the same problem.
And if i try a full wipe a get a message with no mount error.

For whatever reason CWM is not allowing you to mount your /system as rw and /data is not getting mounted.
Have you tried formatting /data? Not just wiping it. You will lose everything on the internal sdcard - be warned.
Failing that install the latest CWM 6.0.5.0 from droid basement and try again.

I'm a little desperate.
I made a fullwipe and factory reset in recovery.
But somehow it is not so pretty.
Because the data I'm not worried, the main thing is it goes again.
How do I make a complete formatting in recovery?
I try to install some different recoverys and the fastboot say all ok, but if i boot in recovery i see the old one.
Pls I don't have 450€ again.

nero0345 said:
I'm a little desperate.
I made a fullwipe and factory reset in recovery.
But somehow it is not so pretty.
Because the data I'm not worried, the main thing is it goes again.
How do I make a complete formatting in recovery?
I try to install some different recoverys and the fastboot say all ok, but if i boot in recovery i see the old one.
Pls I don't have 450€ again.
Click to expand...
Click to collapse
Type out the commands you are using to install the recovery please.
To format /data
Go to CWM
mounts and storage
format /data
format /data and /data/media (/sdcard)
Probably the second one that you want.

I use
fastboot recovery recovery.img
And i get a positiv message

nero0345 said:
I use
fastboot recovery recovery.img
And i get a positiv message
Click to expand...
Click to collapse
You should be using this command:
Code:
fastboot flash recovery recovery.img

Sry, I write it wronge, I have tried to install the recovery with this command you write, but in the terminal i get the message all ok and done. But if I would boot, the old one ist loading and starting, not this one I try to install.
Sry for the longe time, I was at work.
What should I make after format /data?

sbdags said:
You should be using this command:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Sry, I write it wronge, I have tried to install the recovery with this command you write, but in the terminal i get the message all ok and done. But if I would boot, the old one ist loading and starting, not this one I try to install.
Sry for the longe time, I was at work.
What should I make after format /data?

nero0345 said:
Sry, I write it wronge, I have tried to install the recovery with this command you write, but in the terminal i get the message all ok and done. But if I would boot, the old one ist loading and starting, not this one I try to install.
Sry for the longe time, I was at work.
What should I make after format /data?
Click to expand...
Click to collapse
Are you sure the renamed recovery.img is the file you intend to flash? Happened to me... had an old version still in my fastboot folder and forgot to delete it.
How do you reboot?
Do you see a brief blue progress bar on the boot screen?
Post the output of your cmd window as a screen shot.
After formatting data just reboot.

berndblb said:
Are you sure the renamed recovery.img is the file you intend to flash? Happened to me... had an old version still in my fastboot folder and forgot to delete it.
How do you reboot?
Do you see a brief blue progress bar on the boot screen?
Post the output of your cmd window as a screen shot.
After formatting data just reboot.
Click to expand...
Click to collapse
Yes if I would install a recovery i name the file in recovery.img and yes ist is the only file in the folder.
How should I reboot? Normal
If i start my device i see at first the ASUS Logo and on the top left corner the leter "Device Unlocked" or something else and after 2-4 secends I see the Asus bootlogo and the circle of points that rotat around the circle.
I belive the format is finished, but if I reboot, same problem. I am stuck on the boot screen.
I hope you would like see this?
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.119s]
booting...
OKAY [ 0.028s]
finished. total time: 1.151s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 643825664 bytes
sending 'recovery' (8192 KB)...
OKAY [ 1.120s]
writing 'recovery'...
OKAY [ 0.279s]
finished. total time: 1.403s

nero0345 said:
Yes if I would install a recovery i name the file in recovery.img and yes ist is the only file in the folder.
How should I reboot? Normal
If i start my device i see at first the ASUS Logo and on the top left corner the leter "Device Unlocked" or something else and after 2-4 secends I see the Asus bootlogo and the circle of points that rotat around the circle.
I belive the format is finished, but if I reboot, same problem. I am stuck on the boot screen.
I hope you would like see this?
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.119s]
booting...
OKAY [ 0.028s]
finished. total time: 1.151s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 643825664 bytes
sending 'recovery' (8192 KB)...
OKAY [ 1.120s]
writing 'recovery'...
OKAY [ 0.279s]
finished. total time: 1.403s
Click to expand...
Click to collapse
Why are you doing this first?
Code:
fastboot boot recovery.img
You don't need to and this is probably causing the issue.

sbdags said:
Why are you doing this first?
Code:
fastboot boot recovery.img
You don't need to and this is probably causing the issue.
Click to expand...
Click to collapse
I make it to test it

I try again to install a ROM after format /date and /cache, but nothing.
I can cry.
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : CROMBi-kk
ROM Version : CM11-KitKat-4.4.4-20140714-DEODEX
ROM Author : sbdags/lj50036
Device : Asus Transformer TF701T
Start at : Thu Jul 17 11:05:33 2014
Thank you for installing CROMBi-kk KitKat 4.4.4!
Sit back and relax...
-----------------------------------------------------
This will take a few minutes!
Preparing File System.....
Extract: /tmp/fsck.ext4
Extract: /tmp/mkfs.ext4
Extract: /tmp/tune2fs.ext4
Backing up CM11 Addons.....
mount: failed to mount /dev/block/mmcblk0p1 at /system: Invalid argument
about to run program [/tmp/backuptool.sh] with 2 args
Not backing up files from incompatible version: 11
run_program: child exited with status 127
about to run program [/sbin/umount] with 2 args
about to run program [/sbin/umount] with 2 args
umount: can't umount /data: Invalid argument
run_program: child exited with status 1
Formatting System....
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
warning: wipe_block_device: Discard failed
Tuning System.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
Tuning Data - Journaling Enabled.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/UDA at /data: Invalid argument
Wiping Dalvik-cache.....
Wiping Cache.....
Installing Core System.....
Extract: /system/addon.d/50-cm.sh
Extract: /system/addon.d/blacklist
Extract: /system/app/Apollo.apk
Extract: /system/app/BasicDreams.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/BluetoothExt.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CMFileManager.apk
Extract: /system/app/CMWallpapers.apk
Extract: /system/app/Calculator.apk
Extract: /system/app/Camera2.apk
Extract: /system/app/CertInstaller.apk
Extract: /system/app/DSPManager.apk
Extract: /system/app/DeskClock.apk
Extract: /system/app/Development.apk
Extract: /system/app/DocumentsUI.apk
Extract: /system/app/DownloadProviderUi.apk
Extract: /system/app/Email.apk
Extract: /system/app/Exchange2.apk
Extract: /system/app/Galaxy4.apk
Extract: /system/app/Gallery2.apk
Extract: /system/app/HTMLViewer.apk
Extract: /system/app/HoloSpiralWallpaper.apk
Extract: /system/app/KeyChain.apk
Extract: /system/app/LatinIME.apk
Extract: /system/app/LiveWallpapers.apk
Extract: /system/app/LiveWallpapersPicker.apk
Installing Options.....
Kernel Preparation
- 10.26.1.18 CM11 Kernel
DPI Preparation
- 320 DPI
Extract: /tmp/upd-build-prop.sh
Resolution Preparation
- 2560x1600 res
Extract: /tmp/res-build-prop.sh
Boot Animations
- CROMBi-kk BLUE
Launcher
- Apex Launcher
Google Apps
- Google Core Libraries and Play Store
- Google Calendar
- Google Now and Voice Search
- Google Music
- YouTube
- Google Maps
- Google Mail
- Google Hangouts
- Google Plus
- Google TTS
- Google Ears
Misc Apps
- ES File Explorer
- AdAway installed
- Terminal Emulator
- Titanium Backup
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
- DropBox
Extract: /data/app/com.dropbox.android-1.apk
- CM11 Inverted BetterBean Blue Theme
Extract: /data/app/com.blackout1911.theme.BetterbeanThemeFree-1.apk
Installing CROMBi-kk System Tweaks.....
Extract: /tmp/crombikk-build-prop.sh
about to run program [/tmp/crombikk-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.prop4U8QGE': Read-only file system
sed: can't create temp file '/system/build.propzpYgtD': Read-only file system
sed: can't create temp file '/system/build.propWIExOQ': Read-only file system
/tmp/crombikk-build-prop.sh: line 6: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 7: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 8: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 9: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 10: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 11: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 12: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 13: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 14: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 15: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 16: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 17: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 18: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 19: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 20: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 21: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 22: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 23: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 24: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 25: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 26: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 27: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 28: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 29: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 30: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 31: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 32: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 33: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 34: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 35: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 36: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 37: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 38: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 39: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 40: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 41: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 42: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 43: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
Tweaks and Scripts
- Browser2RAM enabled
- Ad Blocker enabled
- Xposed App installed
Extract: /data/app/com.ceco.kitkat.gravitybox-1.apk
Extract: /data/app/com.e_vertise.dopa.phab7-1.apk
Installing build.prop
about to run program [/tmp/upd-build-prop.sh] with 1 args
/tmp/upd-build-prop.sh: line 2: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 3: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 4: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
about to run program [/tmp/res-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.propRlJcH6': Read-only file system
sed: can't create temp file '/system/build.propbiValf': Read-only file system
sed: can't create temp file '/system/build.propwZST3P': Read-only file system
sed: can't create temp file '/system/build.propypRuEJ': Read-only file system
sed: can't create temp file '/system/build.propVIfJGb': Read-only file system
run_program: child exited with status 1
Building symlinks.....
symlink: failed to symlink /system/bin/dump.f2fs to ../bin/fsck.f2fs: Read-only file system
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
Installer Error (Status 7)
End at : Thu Jul 17 11:06:00 2014

nero0345 said:
I try again to install a ROM after format /date and /cache, but nothing.
I can cry.
Code:
AROMA INSTALLER version 2.56
(c) 2012 by amarullz xda-developers
ROM Name : CROMBi-kk
ROM Version : CM11-KitKat-4.4.4-20140714-DEODEX
ROM Author : sbdags/lj50036
Device : Asus Transformer TF701T
Start at : Thu Jul 17 11:05:33 2014
Thank you for installing CROMBi-kk KitKat 4.4.4!
Sit back and relax...
-----------------------------------------------------
This will take a few minutes!
Preparing File System.....
Extract: /tmp/fsck.ext4
Extract: /tmp/mkfs.ext4
Extract: /tmp/tune2fs.ext4
Backing up CM11 Addons.....
mount: failed to mount /dev/block/mmcblk0p1 at /system: Invalid argument
about to run program [/tmp/backuptool.sh] with 2 args
Not backing up files from incompatible version: 11
run_program: child exited with status 127
about to run program [/sbin/umount] with 2 args
about to run program [/sbin/umount] with 2 args
umount: can't umount /data: Invalid argument
run_program: child exited with status 1
Formatting System....
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
warning: wipe_block_device: Discard failed
Tuning System.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
Tuning Data - Journaling Enabled.....
about to run program [/tmp/tune2fs.ext4] with 6 args
tune2fs 1.41.12 (17-May-2010)
mount: failed to mount /dev/block/platform/sdhci-tegra.3/by-name/UDA at /data: Invalid argument
Wiping Dalvik-cache.....
Wiping Cache.....
Installing Core System.....
Extract: /system/addon.d/50-cm.sh
Extract: /system/addon.d/blacklist
Extract: /system/app/Apollo.apk
Extract: /system/app/BasicDreams.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/BluetoothExt.apk
Extract: /system/app/Browser.apk
Extract: /system/app/CMFileManager.apk
Extract: /system/app/CMWallpapers.apk
Extract: /system/app/Calculator.apk
Extract: /system/app/Camera2.apk
Extract: /system/app/CertInstaller.apk
Extract: /system/app/DSPManager.apk
Extract: /system/app/DeskClock.apk
Extract: /system/app/Development.apk
Extract: /system/app/DocumentsUI.apk
Extract: /system/app/DownloadProviderUi.apk
Extract: /system/app/Email.apk
Extract: /system/app/Exchange2.apk
Extract: /system/app/Galaxy4.apk
Extract: /system/app/Gallery2.apk
Extract: /system/app/HTMLViewer.apk
Extract: /system/app/HoloSpiralWallpaper.apk
Extract: /system/app/KeyChain.apk
Extract: /system/app/LatinIME.apk
Extract: /system/app/LiveWallpapers.apk
Extract: /system/app/LiveWallpapersPicker.apk
Installing Options.....
Kernel Preparation
- 10.26.1.18 CM11 Kernel
DPI Preparation
- 320 DPI
Extract: /tmp/upd-build-prop.sh
Resolution Preparation
- 2560x1600 res
Extract: /tmp/res-build-prop.sh
Boot Animations
- CROMBi-kk BLUE
Launcher
- Apex Launcher
Google Apps
- Google Core Libraries and Play Store
- Google Calendar
- Google Now and Voice Search
- Google Music
- YouTube
- Google Maps
- Google Mail
- Google Hangouts
- Google Plus
- Google TTS
- Google Ears
Misc Apps
- ES File Explorer
- AdAway installed
- Terminal Emulator
- Titanium Backup
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
- DropBox
Extract: /data/app/com.dropbox.android-1.apk
- CM11 Inverted BetterBean Blue Theme
Extract: /data/app/com.blackout1911.theme.BetterbeanThemeFree-1.apk
Installing CROMBi-kk System Tweaks.....
Extract: /tmp/crombikk-build-prop.sh
about to run program [/tmp/crombikk-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.prop4U8QGE': Read-only file system
sed: can't create temp file '/system/build.propzpYgtD': Read-only file system
sed: can't create temp file '/system/build.propWIExOQ': Read-only file system
/tmp/crombikk-build-prop.sh: line 6: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 7: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 8: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 9: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 10: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 11: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 12: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 13: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 14: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 15: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 16: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 17: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 18: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 19: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 20: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 21: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 22: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 23: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 24: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 25: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 26: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 27: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 28: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 29: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 30: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 31: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 32: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 33: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 34: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 35: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 36: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 37: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 38: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 39: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 40: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 41: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 42: can't create /system/build.prop: Read-only file system
/tmp/crombikk-build-prop.sh: line 43: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
Tweaks and Scripts
- Browser2RAM enabled
- Ad Blocker enabled
- Xposed App installed
Extract: /data/app/com.ceco.kitkat.gravitybox-1.apk
Extract: /data/app/com.e_vertise.dopa.phab7-1.apk
Installing build.prop
about to run program [/tmp/upd-build-prop.sh] with 1 args
/tmp/upd-build-prop.sh: line 2: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 3: can't create /system/build.prop: Read-only file system
/tmp/upd-build-prop.sh: line 4: can't create /system/build.prop: Read-only file system
run_program: child exited with status 1
about to run program [/tmp/res-build-prop.sh] with 1 args
sed: can't create temp file '/system/build.propRlJcH6': Read-only file system
sed: can't create temp file '/system/build.propbiValf': Read-only file system
sed: can't create temp file '/system/build.propwZST3P': Read-only file system
sed: can't create temp file '/system/build.propypRuEJ': Read-only file system
sed: can't create temp file '/system/build.propVIfJGb': Read-only file system
run_program: child exited with status 1
Building symlinks.....
symlink: failed to symlink /system/bin/dump.f2fs to ../bin/fsck.f2fs: Read-only file system
script aborted: symlink: some symlinks failed
symlink: some symlinks failed
Installer Error (Status 7)
End at : Thu Jul 17 11:06:00 2014
Click to expand...
Click to collapse
Download the file again or try another Rom ( cm for example)

Rikodu said:
Download the file again or try another Rom ( cm for example)
Click to expand...
Click to collapse
I have tried it with Stock Rom and the two CROMBi ROMs.

nero0345 said:
I have tried it with Stock Rom and the two CROMBi ROMs.
Click to expand...
Click to collapse
Try Cyanogenmod

It's not the rom - it's your device - for some reason it can't mount data and system - you need to fix that. Normally a job for recovery. Bt seing as you can't install a recovery that makes me even more concerned - that means other partitions are corrupted.
There is a post somewhere on how to fix from fastboot or adb - let me see if I can dig it up.
EDIT:
Ok you need to read this post very carefully and follow the instructions exactly if possible. I suspect this is the only way to get it back.
http://forum.xda-developers.com/showthread.php?t=2546941

[Q&A] [ROM] ViperOne 7.0.1 • Tweaks, HUB, Themes, Icons, OTAs and more • All variants

[Q&A] [ROM] ViperOne 7.0.1 • Tweaks, HUB, Themes, Icons, OTAs and more • All variants
Q&A for [ROM] ViperOne 7.0.1 • Tweaks, HUB, Themes, Icons, OTAs and more • All variants
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

eliasadrian said:
I've been having issues, also. I've only noticed it in group messages, and my wife got my messages on her htc one but my iPhone friends didn't. I just thought it was Apple screwing up group messaging again...
Click to expand...
Click to collapse
I get the same failure error (failed after repeated attempts) when I try to send out a group message or response as a MMS. Are you using the stock sense messaging app (MMS over Wifi will only go through the stock app) and do you have the send group messages as MMS option checked in the settings?

Hi turge,
I just download viperone m8 2.4
but i pinched wrong button on FILEMANAGER instead of install viper one.
but it pop up PLEASE WAIT and it stucked for few hours.
I already tried pressing power button for 2 minutes, it didn't worked.
I also tried to pressing power buton together with volume down for 2 minutes, it didn't work either.
Please help what to do now?
Your answer highly appreciated.
by the way, I am amazed your viper since viper one 1.0
thanks for creating awesome ROM.
Scooterholic.

I am download viprone v 7.0.1 and Double-clicking on Home Button Does not work
any one he's know please Help me

Updating to 7.0.1
Okay, so on my HTC One M7 I have 7.0.0 installed and everything is working perfectly. Now, I want to update to 7.0.1, but I don't know how to do so without erasing everything I currently have on my phone. I went to settings and checked for an update, because I heard that is how you do OTA updates, but it said there were none. I know I can just download then flash it onto my phone, but I'm pretty sure that also erases everything. So yeah, I was wondering if anybody could help me out here.
---------- Post added at 04:36 PM ---------- Previous post was at 04:24 PM ----------
Okay, so on my HTC One M7 I have 7.0.0 installed and everything is working perfectly. Now, I want to update to 7.0.1, but I don't know how to do so without erasing everything I currently have on my phone. I went to settings and checked for an update, because I heard that is how you do OTA updates, but it said there were none. I know I can just download then flash it onto my phone, but I'm pretty sure that also erases everything. So yeah, I was wondering if anybody could help me out here. (if this is posted twice, it's because I'm new here and have no clue how to post in a thread correctly)

guys help me I'm in viper rom 2.7 to 7.1 hours, then you must do what my brothers are kenel kenel la-4.3.10 # 1 SMP ga1054aroot @ abm010 PREEMTP à brothers

Shadow Fyre said:
Okay, so on my HTC One M7 I have 7.0.0 installed and everything is working perfectly. Now, I want to update to 7.0.1, but I don't know how to do so without erasing everything I currently have on my phone. I went to settings and checked for an update, because I heard that is how you do OTA updates, but it said there were none. I know I can just download then flash it onto my phone, but I'm pretty sure that also erases everything. So yeah, I was wondering if anybody could help me out here.
Click to expand...
Click to collapse
From what I read in the OP there isn't an OTA for this update. You can just flash 7.0.1 over 7.0.0 without a wipe in Aroma. This will preserve your data.
ViperOne Install Instructions​
Download the the latest ViperOne full ROM zip from the download section
Place the file somewhere on your phone storage. Alternatively, if you have a USB OTG cable (I have this exact one), you can place the rom on a USB key (FAT32, NTFS are all supported).
Confirm the MD5 on the download page matches the MD5 of the file on your phone (ES File Explorer will show the MD5 of the file)
Reboot to TWRP Recovery
Backup current ROM if desired
Install ROM using TWRP and select wipe during aroma install if coming from another base You are coming from the same base!
Reboot and Enjoy
Click to expand...
Click to collapse

my htc one 802D get rebboting
my phone keep rebboting nd stucks at htc logo.
please guide me what to do.
i have flashed through TWRP2.7.0.0

Hi
Got a problem with flashing ViperOne 7.0.1. I mean Aroma stucks on Formatting Partitions and freezes there. Tried to make full wipe (including system , dalvik etc - done 3 times) but it doesnt work. Downloaded 2 times... Doesnt work. Plz help

Bruce666 said:
Hi
Got a problem with flashing ViperOne 7.0.1. I mean Aroma stucks on Formatting Partitions and freezes there. Tried to make full wipe (including system , dalvik etc - done 3 times) but it doesnt work. Downloaded 2 times... Doesnt work. Plz help
Click to expand...
Click to collapse
You might try downloading and installing the latest stock firmware for your phone, boot into recovery and do a factory reset then reboot into bootloader. Now install your custom recovery then flash ViperOne.

But in this case I have to send ROM via adb sideload, right?

Bruce666 said:
But in this case I have to send ROM via adb sideload, right?
Click to expand...
Click to collapse
You could use ADB sideload or push but if your PC file manager recognizes your phone you can just copy the ROM to the /Download folder on your phone. To do that you would have to boot into the OS first, copy the file over then boot into bootloader to flash the custom recovery.

Hi there!
Is there a tweak/mod/settings to lower volume when it is it's lowest settings when sound is still heard?

ViperOne 7.0.1 on m7 Weather problem
I was wondering if someone could give me a hand. I'm new to flashing and I followed all the instructions and am loving the Viper ROM on my m7, (v7.0.1) nothing but good impressions except for one. I had to manually extract the weather clock apk from the zip and install it afterwards (took a while to find it) and weather also wasn't installed. The widget works fine, but it's in Celsius and to change that I need the weather app, I'm sure.
I extracted the weather.apk file from the zip and installed it, getting the ever-so-helpful error "The App was not installed" at the end of the install process. I tried using Venom's installer and it said it was installed, but it wasn't.
Can anyone offer me a way to change the degree style or install weather.apk? (I don't want to stop using the weatherclock, I like all the skins and options that ViperOne gives it.
And sorry if this is a dumb question.

Bruce666 said:
Hi
Got a problem with flashing ViperOne 7.0.1. I mean Aroma stucks on Formatting Partitions and freezes there. Tried to make full wipe (including system , dalvik etc - done 3 times) but it doesnt work. Downloaded 2 times... Doesnt work. Plz help
Click to expand...
Click to collapse
Sounds like recovery issue to me. I'll suggest u to do a full wipe firmware flashing then install recovery of ur choice and flash the Rom..

cutecool said:
Sounds like recovery issue to me. I'll suggest u to do a full wipe firmware flashing then install recovery of ur choice and flash the Rom..
Click to expand...
Click to collapse
Yes thats right. The problem was incompatibility. After Flash twrp 2.6.3.3 didnt had any problems.

ViperOne 7, chrome lost it's menu
So installed the rom successfully but now I have chrome missing it's menu button. The way I have to now access it is by holding the home button, but before on stock it sat on the top right. How do I get it back? I rather keep a dedicated button up there.

HTC one (m7), from stock One_6.09.401.5_deodexed to ViperOne 7.0.1
Please help!!
come from fresh install of One_6.09.401.5_deodexed (this runs fine)
but when i try to install ViperOne 7.0.1 it fails
i have also perviously wiped my Phone (almost compeletely)
heres my log:
AROMA INSTALLER version 2.70B6
(c) 2013 by amarullz xda-developers
ROM Name : ViperOne
ROM Version : 7.0.1
ROM Author : Team Venom
Device : HTC One
Start at : Thu Oct 23 11:07:34 2014
===========================================
ViperOne 7.0.1 By Team Venom
Be patient – 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extract: /sdcard/Venom/Tools/BuildPropUpdate.sh
Extract: /sdcard/Venom/Tools/ConfigureSettings.sh
Extract: /sdcard/Venom/Tools/CopyLogFile.sh
Extract: /sdcard/Venom/Tools/DeleteDataWithoutMedia.sh
Extract: /sdcard/Venom/Tools/DeleteSystemApp.sh
Extract: /sdcard/Venom/Tools/DeleteUserApp.sh
Extract: /sdcard/Venom/Tools/EnableOTA.sh
Extract: /sdcard/Venom/Tools/ExtraTweaks
Extract: /sdcard/Venom/Tools/FileSystemCheck.sh
Extract: /sdcard/Venom/Tools/SetPropSetting.sh
Extract: /sdcard/Venom/Tools/SetSetting.sh
Extract: /sdcard/Venom/Tools/UpdateDefaultXml.sh
Extract: /sdcard/Venom/Tools/VenomCheck.sh
Extract: /sdcard/Venom/Tools/VenomMod.sh
Extract: /sdcard/Venom/Tools/VenomThemeTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomUpdate.sh
Extract: /sdcard/Venom/Tools/fsck.ext4
Extract: /sdcard/Venom/Tools/sqlite3
Extract: /sdcard/Venom/Tools/zip
Extract: /sdcard/Venom/Tools/zipalign
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Extract: /temp/fsck.ext4
Extract: /temp/mkfs.ext4
Extract: /temp/tune2fs.ext4
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
Creating filesystem with parameters:
Size: 1946152960
Block size: 4096
Blocks per group: 32768
Inodes per group: 7920
Inode size: 256
Journal blocks: 7423
Label:
Blocks: 475135
Block groups: 15
Reserved block group size: 119
Created filesystem with 11/118800 inodes and 15607/475135 blocks
Formatting /cache
Creating filesystem with parameters:
Size: 671084544
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 2559
Label:
Blocks: 163839
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/40960 inodes and 5255/163839 blocks
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Extract: /system/app/BasicDreams.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/CIMEXT9.apk
Extract: /system/app/Calculator.apk
Extract: /system/app/CalculatorWidget.apk
Extract: /system/app/CertInstaller.apk
Extract: /system/app/ChromeBookmarksSyncAdapter.apk
Extract: /system/app/DeviceManagement.apk
Extract: /system/app/DocumentsUI.apk
Extract: /system/app/DownloadProviderUi.apk
Extract: /system/app/DriveActivator.apk
Extract: /system/app/FMRadioService.apk
Extract: /system/app/FaceLock.apk
Extract: /system/app/Flashlight.apk
Extract: /system/app/Font_Helvetica.apk
Extract: /system/app/Font_LCD.apk
Extract: /system/app/Font_Yuen.apk
Extract: /system/app/GoogleCalendarSyncAdapter.apk
Extract: /system/app/GoogleContactsSyncAdapter.apk
Writing Data
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.adobe.reader-1.apk
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
Extract: /system/customize/resource/bootanimation.zip
Extract: /system/customize/resource/downanimation.zip
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
Generic
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
Extract: /data/system/carrier_icon.png
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Removing User Apps
Twitter
about to run program [/sbin/busybox] with 4 args
Removing Google Apps
Google+
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
sh: can’t open ‘/sdcard/Venom/Tools/DeleteSytemApp.sh’
run_program: child exited with status 2
Google Chrome
about to run program [/sbin/busybox] with 4 args
Deleting /data/app/com.android.chrome-1.apk
Google Hangout
about to run program [/sbin/busybox] with 4 args
Google News
about to run program [/sbin/busybox] with 4 args
Removing Venom Apps
Removing System Apps
Browser
about to run program [/sbin/busybox] with 4 args
Mail
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
Notes
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
Bookmark sync
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/ChromeBookmarksSyncAdapter.apk
HTC Backup
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/DeviceManagement.apk
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/HTCBackup.apk
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 1 in /tmp/VenomSettings.prop
Removing Media
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 1 in /tmp/VenomSettings.prop
Installing Keyboards
English UK
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
13332+0 records in
13332+0 records out
6825984 bytes (6.5MB) copied, 1.445587 seconds, 4.5MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
symlink(): created [/system/bin]
symlink(): created [/system/xbin]
symlink(): created [/system/xbin/bb]
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Thu Oct 23 11:07:54 2014

drakhonHTC said:
Please help!!
come from fresh install of One_6.09.401.5_deodexed (this runs fine)
but when i try to install ViperOne 7.0.1 it fails
i have also perviously wiped my Phone (almost compeletely)
Installer Error (Status 7)
End at : Thu Oct 23 11:07:54 2014
Click to expand...
Click to collapse
use the latest twrp recovery to flash rom.

still not working
cutecool said:
use the latest twrp recovery to flash rom.
Click to expand...
Click to collapse
still not working
AROMA INSTALLER version 2.70B6
(c) 2013 by amarullz xda-developers
ROM Name : ViperOne
ROM Version : 7.0.1
ROM Author : Team Venom
Device : HTC One
Start at : Sat Oct 25 08:36:04 2014
===========================================
ViperOne 7.0.1 By Team Venom
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extract: /sdcard/Venom/Tools/BuildPropUpdate.sh
Extract: /sdcard/Venom/Tools/ConfigureSettings.sh
Extract: /sdcard/Venom/Tools/CopyLogFile.sh
Extract: /sdcard/Venom/Tools/DeleteDataWithoutMedia.sh
Extract: /sdcard/Venom/Tools/DeleteSystemApp.sh
Extract: /sdcard/Venom/Tools/DeleteUserApp.sh
Extract: /sdcard/Venom/Tools/EnableOTA.sh
Extract: /sdcard/Venom/Tools/ExtraTweaks
Extract: /sdcard/Venom/Tools/FileSystemCheck.sh
Extract: /sdcard/Venom/Tools/SetPropSetting.sh
Extract: /sdcard/Venom/Tools/SetSetting.sh
Extract: /sdcard/Venom/Tools/UpdateDefaultXml.sh
Extract: /sdcard/Venom/Tools/VenomCheck.sh
Extract: /sdcard/Venom/Tools/VenomMod.sh
Extract: /sdcard/Venom/Tools/VenomThemeTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomUpdate.sh
Extract: /sdcard/Venom/Tools/fsck.ext4
Extract: /sdcard/Venom/Tools/sqlite3
Extract: /sdcard/Venom/Tools/zip
Extract: /sdcard/Venom/Tools/zipalign
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Extract: /temp/fsck.ext4
Extract: /temp/mkfs.ext4
Extract: /temp/tune2fs.ext4
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p35 on /system failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 8 args
Setting HostsFileByAdAway to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
Creating filesystem with parameters:
Size: 1946152960
Block size: 4096
Blocks per group: 32768
Inodes per group: 7920
Inode size: 256
Journal blocks: 7423
Label:
Blocks: 475135
Block groups: 15
Reserved block group size: 119
Created filesystem with 11/118800 inodes and 15607/475135 blocks
Formatting /cache
Creating filesystem with parameters:
Size: 671084544
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 2559
Label:
Blocks: 163839
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/40960 inodes and 5255/163839 blocks
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Extract: /system/app/BasicDreams.apk
Extract: /system/app/Bluetooth.apk
Extract: /system/app/CIMEXT9.apk
Extract: /system/app/Calculator.apk
Extract: /system/app/CalculatorWidget.apk
Extract: /system/app/CertInstaller.apk
Extract: /system/app/ChromeBookmarksSyncAdapter.apk
Extract: /system/app/DeviceManagement.apk
Extract: /system/app/DocumentsUI.apk
Extract: /system/app/DownloadProviderUi.apk
Extract: /system/app/DriveActivator.apk
Extract: /system/app/FMRadioService.apk
Extract: /system/app/FaceLock.apk
Extract: /system/app/Flashlight.apk
Extract: /system/app/Font_Helvetica.apk
Extract: /system/app/Font_LCD.apk
Extract: /system/app/Font_Yuen.apk
Extract: /system/app/GoogleCalendarSyncAdapter.apk
Extract: /system/app/GoogleContactsSyncAdapter.apk
Writing Data
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.adobe.reader-1.apk
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
AT&T
Extract: /system/build.prop
Extract: /system/etc/nfcee_access.xml
Extract: /system/etc/permissions/com.htc.software.market.xml
Extract: /system/priv-app/ATT_VVM3.apk
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
Extract: /data/system/carrier_icon.png
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Removing User Apps
Twitter
about to run program [/sbin/busybox] with 4 args
Removing Google Apps
Google+
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
sh: can't open '/sdcard/Venom/Tools/DeleteSytemApp.sh'
run_program: child exited with status 2
Google Chrome
about to run program [/sbin/busybox] with 4 args
Deleting /data/app/com.android.chrome-1.apk
Google Hangout
about to run program [/sbin/busybox] with 4 args
Google News
about to run program [/sbin/busybox] with 4 args
Removing Venom Apps
Removing System Apps
Browser
about to run program [/sbin/busybox] with 4 args
Twitter
about to run program [/sbin/busybox] with 4 args
Bookmark sync
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/ChromeBookmarksSyncAdapter.apk
HTC Backup
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/DeviceManagement.apk
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
Deleting /system/app/HTCBackup.apk
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 1 in /tmp/VenomSettings.prop
Removing Media
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 1 in /tmp/VenomSettings.prop
Installing Keyboards
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
13332+0 records in
13332+0 records out
6825984 bytes (6.5MB) copied, 0.930603 seconds, 7.0MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
symlink(): created [/system/bin]
symlink(): created [/system/xbin]
symlink(): created [/system/xbin/bb]
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Sat Oct 25 08:36:16 2014

[Q] how to install liquidsmooth

I have the sprint n6. I am unlocked and rooted. The phone is decrypted. I have twrp for recovery. Everytime i try to flash this through twrp, it errors out. Do i have to sideload this? Ive tried looking through the board but didnt see anything. Thanks in advance for the help

What's the error for starts

What error? Is the rom downloaded fully and not corrupted?
Sent from my Nexus 6 using Tapatalk

Installing '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
about to run program [/tmp/backuptool.sh] with 2 args
Not backing up files from incompatible version: 12
run_program: child exited with status 127
about to run program [/tmp/otasigcheck.sh] with 1 args
You have an installed system that isn't signed with this build's key, aborting...
run_program: child exited with status 1
script aborted: Can't install this package on top of incompatible data. Please try another package or run a factory reset
Can't install this package on top of incompatible data. Please try another package or run a factory reset
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'
Error flashing zip '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'
Updating partition details...
Iata backup size is 1164MB, free: 21687MB.
That was the log from twrp

toast333 said:
Installing '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
about to run program [/tmp/backuptool.sh] with 2 args
Not backing up files from incompatible version: 12
run_program: child exited with status 127
about to run program [/tmp/otasigcheck.sh] with 1 args
You have an installed system that isn't signed with this build's key, aborting...
run_program: child exited with status 1
script aborted: Can't install this package on top of incompatible data. Please try another package or run a factory reset
Can't install this package on top of incompatible data. Please try another package or run a factory reset
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'
Error flashing zip '/sdcard/Download/LS-LP-v4.0-2014-12-21-liquid_shamu.zip'
Updating partition details...
Iata backup size is 1164MB, free: 21687MB.
That was the log from twrp
Click to expand...
Click to collapse
Before installing, did you wipe the system partition?

I thought I had. Lemme try that again.

There's a Q&A for LS right here http://forum.xda-developers.com/showthread.php?t=2977149

[SOLVED] Bootloop

So i get tired of viperone and saw the MIUI V7 post and i tried to install it, when i started i had the TWRP 2.8.4.0, get into the recovery and i did a format data because i had a lot of trash, install the zip and reboot, get stuck in htc white screen, tried to reinstall and nothing, tried to install the viperone and a error appear, i´ve tried a lot of solutions but nothing works, fastboot is working, adb dont know, hope you can help me:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.06.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -
(bootloader) imei: -
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3903mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-01dc707e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Also the viperone instalation error:
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOne
ROM Version : 9.0.0
ROM Author : Team Venom
Device : HTC One
Start at : Mon Mar 7 07:32:01 2016
I:emmc_scan_partitions:[partition_count:21] [allocat_num:128]
bad option "flags=encryptable=/dev/block/platform/msm_sdcc.1/by-name/extra"
skipping malformed recovery.fstab line: /data ext4 /dev/block/platform/msm_sdcc.1/by-name/userdata flags=encryptable=/dev/block/platform/msm_sdcc.1/by-name/extra
bad option "flags=display="USB"
skipping malformed recovery.fstab line: /usb-otg auto /dev/block/sda1 /dev/block/sda flags=display="USB OTG";storage;wipeingui;removable
recovery filesystem table in updater...
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/platform/msm_sdcc.1/by-name/boot (null) 0
2 /cache ext4 /dev/block/platform/msm_sdcc.1/by-name/cache (null) 0
3 /devlog ext4 /dev/block/platform/msm_sdcc.1/by-name/devlog (null) 0
4 /misc emmc /dev/block/platform/msm_sdcc.1/by-name/misc (null) 0
5 /recovery emmc /dev/block/platform/msm_sdcc.1/by-name/recovery (null) 0
6 /system ext4 /dev/block/platform/msm_sdcc.1/by-name/system (null) 0
===========================================
ViperOne 9.0.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m7
about to run program [/sbin/getprop] with 2 args
m7
about to run program [/sbin/busybox] with 3 args
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
mkdir: can't create directory '/temp': File exists
run_program: child exited with status 1
Setting permissions
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
14056+0 records in
14056+0 records out
7196672 bytes (6.9MB) copied, 1.007446 seconds, 6.8MB/s
Kernel Flashed.
Unmounting partitions
===========================================
Stock kernel flashed successfully!
===========================================
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
mkdir: can't create directory '/temp': File exists
run_program: child exited with status 1
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
118800 inodes, 475135 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=486539264
15 block groups
32768 blocks per group, 32768 fragments per group
7920 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/15 1/15 2/15 3/15 4/15 5/15 6/15 7/15 8/15 9/1510/1511/1512/1513/1514/15done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 20 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
40960 inodes, 163839 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=167772160
5 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304
Writing inode tables: 0/51/52/53/54/5done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
about to run program [/sbin/busybox] with 4 args
Writing Gallery OOB data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting GPSPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
14056+0 records in
14056+0 records out
7196672 bytes (6.9MB) copied, 1.812104 seconds, 3.8MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
symlink(): created [/system/bin]
Creating additional symlinks
symlink(): created [/system/priv-app]
symlink(): created [/system/priv-app/HtcRingtoneTrimmer]
symlink(): created [/system/priv-app/HtcRingtoneTrimmer/lib]
symlink(): created [/system/priv-app/HtcRingtoneTrimmer/lib/arm]
symlink(): created [/system/priv-app/PolarisOffice]
symlink(): created [/system/priv-app/PolarisOffice/lib]
symlink(): created [/system/priv-app/PolarisOffice/lib/arm]
symlink(): created [/system/priv-app/HtcMusic]
symlink(): created [/system/priv-app/HtcMusic/lib]
symlink(): created [/system/priv-app/HtcMusic/lib/arm]
symlink(): created [/system/priv-app/Automotive_Traffic]
symlink(): created [/system/priv-app/Automotive_Traffic/lib]
symlink(): created [/system/priv-app/Automotive_Traffic/lib/arm]
symlink(): created [/system/app/Bluetooth/lib]
symlink(): created [/system/app/Bluetooth/lib/arm]
symlink(): created [/system/app/HtcCupd]
symlink(): created [/system/app/HtcCupd/lib]
symlink(): created [/system/app/HtcCupd/lib/arm]
symlink(): created [/system/priv-app/DefaultContainerService]
symlink(): created [/system/priv-app/DefaultContainerService/lib]
symlink(): created [/system/priv-app/DefaultContainerService/lib/arm]
symlink(): created [/system/priv-app/HtcMusicEnhancer]
symlink(): created [/system/priv-app/HtcMusicEnhancer/lib]
symlink(): created [/system/priv-app/HtcMusicEnhancer/lib/arm]
symlink(): created [/system/app/HtcLogLevel]
symlink(): created [/system/app/HtcLogLevel/lib]
symlink(): created [/system/app/HtcLogLevel/lib/arm]
symlink(): created [/system/app/QXDM2SD]
symlink(): created [/system/app/QXDM2SD/lib]
symlink(): created [/system/app/QXDM2SD/lib/arm]
symlink(): created [/system/priv-app/HtcDLNAMiddleLayer]
symlink(): created [/system/priv-app/HtcDLNAMiddleLayer/lib]
symlink(): created [/system/priv-app/HtcDLNAMiddleLayer/lib/arm]
symlink(): created [/system/app/PacProcessor]
symlink(): created [/system/app/PacProcessor/lib]
symlink(): created [/system/app/PacProcessor/lib/arm]
symlink(): created [/system/app/Nfc]
symlink(): created [/system/app/Nfc/lib]
symlink(): created [/system/app/Nfc/lib/arm]
symlink(): created [/system/app/PrintSpooler]
symlink(): created [/system/app/PrintSpooler/lib]
symlink(): created [/system/app/PrintSpooler/lib/arm]
symlink(): created [/system/app/Smith]
symlink(): created [/system/app/Smith/lib]
symlink(): created [/system/app/Smith/lib/arm]
symlink(): created [/system/priv-app/Message]
symlink(): created [/system/priv-app/Message/lib]
symlink(): created [/system/priv-app/Message/lib/arm]
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Mon Mar 7 07:32:23 2016
Now i have the TWRP 3.0
Thanks
EDIT:
SOLVED:
steps i did:
-try to flash ruu with .exe RUU`S it failed an let the phone with the black screen with htc silver letters.
-with fastboot flash this firmware follow the steps.
It failed 3 or 4 times but kept insisting and finally work
-flash the TWRP 3.0
Code:
fastboot flash recovery twrp.img
-place the viperone zip in the phone and install it and now it works.
-I dont know what i did well or wrong and if this is going to work on your m7. That was what worked for me.
EDIT 2:
I´ve tried again to install the miui v7 and get to the same point so i did again the steps but instead of install viperone i`ve installed miui and its work