Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Aaroneious said:
Found this on amazon for the Vivo tab, which uses the same 36-pin connector as the TF701. So I bought it for $20US hoping it would work with the 701 and it does! Plugged in the OTG adapter and attached my sandisk extreme usb 3 thumbdrive. Used the included SD/uSD card adapter to connect a couple SD cards and had no problems. Didn't do any speed tests or anything, just wanted to make sure they worked, and they did.
ASUS Extension Kit for VivoTab-Series Tablets
Click to expand...
Click to collapse
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Trevor_g said:
Wow... Great find!
Hey - happen to have a PS3 controller you could test with? Almost bought the dock purely for this purpose, so I'm dying to know if plugging a controller in through USB would work...
If this really is fully supported by the tf701t, I'm seriously questioning why they didn't say so?
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Sorry, no, I don't have a PS3 controller.
Aaroneious said:
Sorry, no, I don't have a PS3 controller.
Click to expand...
Click to collapse
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Trevor_g said:
No problem. There is another way to find out. Do you have a USB mouse and/or keyboard handy? If you wouldn't mind testing these basic peripherals, we could really verify if this thing provides host mode for more than disk drives.
If so, I'm buying!
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Standard mouse and keyboard both work fine when plugged into the OTG adapter.
Shocking. Why in the world would Asus not bother marketing this toward the TF community too?!
Glad you found this. Thanks for sharing and testing... Off to buy!
Sent from my K00C using Tapatalk
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
guho said:
In 4 one. 9 left in stock. Now all I need is an extra usb cable. Can anyone point me to one?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Yeah I just want the extra cable - assume any vivo tab one works?
OTG USB adapter
I have ordered one too. Thanks for the link. :cyclops:
OTG USB Adapter
That's good idea, but unfortunately I can't buy this thing. There are blutooth usb-hub, for example _ttp://usb.brando.com/prod_detail.php?prod_id=00142
Will it work?
can someone find me the right product on the german amazon site? or uk?
i cant find
Can you charge and use USB with this?
Nice
Finaly, i recieved my OTG USB adapter today, and it works perfectly.
Thanks for the link.
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
evodev said:
or you can just buy the one meant for the transformer and it's a few dollars cheaper if you can't get the other one. Just doesn't come with the SD card adapter. This is the one that I intend to buy once I get my tablet
Click to expand...
Click to collapse
Warning: This will not work with our TF701!!!!!! Read the Q&A below the product description !!
should the one for the tf700t also work?
The adapters mentioned that work with the 701 are all usb-2.
Does anyone know of a usb-3 adapter that will work?
matthelm said:
Can you charge and use USB with this?
Click to expand...
Click to collapse
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
nop- said:
I'm considering getting a TF701T, does anyone know if you could use this to charge the device? It'd be nice to know I have a backup if the proprietary USB cable fails.
Click to expand...
Click to collapse
Also can you simultaneously power the device and provide input using a usb hub(plug in keyboard and mouse for example)?
I went to the computer store. Bought the following:
The adapter which is 2.0 by the way.
USB 3.0 HUB with Power Adaper.
A male to A male cable.
While connected to a the HUB, and while the device is on its says "NOT CHARGING". I turn it off(tablet), Not getting a charge while connected to a the hub. It also drained it while the tablet is off. Nevermind the hub for power.
NO CHARGE FROM HUB
While connected to the PC it drained the power down to 6% then went back up to 50%. Not sure about that because it seemed to charge while it was off.
NO CHARGE FROM PC
As for the power adapter that comes with the tablet to it. Not charging while ON. Turn it off and no charge.
NO CHARGE FROM ASUS POWER ADAPTER
SO no it doesnt charge in any practical sense from this VIVO adapter as far as i can tell. Maybe its the MALE to MALE cable. I dont know. But its not worth trying if there a chance of drain killing it.
Unfortunately from the adapter there is no media connection or usb debugging to pc or usb hub afiak.
NO MEDIA CONNECTION OR USB DEBUGGING
The good news is that the device can connect to the USB HUB and the keyboard , mouse and thumb drive work flawlessly together.
Related
I have everything planed out for my tab install for my Dodge Magnum. But since the Nexus 7 doesnt have a sd slot I need to find a cable that can charge the tablet and use my flash drive at same time.
My flash drive(Usb on dash, so its easily removable)
http://www.amazon.com/gp/product/B00812F7O8/ref=ox_sc_act_title_4?ie=UTF8&smid=ATVPDKIKX0DER
Plugging this into the usb otg cable
http://www.amazon.com/Black-4-Port-...qid=1348442221&sr=8-3&keywords=4+port+usb+hub
I would love host cable with 2 usb inputs but cant seem to find it and dont know if its even possible.
Any help would be appreciated.
I found this on the bay : item # 140839631580 (Can't post link I'm too new... I was a lurker for a while -_-)
i didn't think the N7 could support power and OTG
You want it for video or audio? You could try a wifi solution for audio. Or be the guy that gets the pins to work.
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Unfortunately OTG sends ground up the sense pin to trigger host mode. Once activated it sends 5V DOWN the USB cable to power your USB devices. Trying to send voltage up the cable at the same time to the Nexus would not be a good idea. The only way around it I can think of would be to hack the firmware to only activate the data pins in host mode and keep the power circuit seperate, then you could power the USB device from a modified dock/hub which sends power up the USB cable to the device.
A lot of work, and without the powered hub, OTG would be useless!
In the long run wouldn't it be easier to just plug in the power lead when needed and have the otg in the rest of the time? (or vice versa). It would mean you having to have easy access to the usb port but I can't see an easy non technical solution to connecting both at once.
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
earlyberd said:
Don't use the Nexus 7 for a car install. You can get an Acer Iconia A100 with a full-size USB port to connect to whatever external storage solution you want, and it's usually about the same price or cheaper than the Nexus 7.
Click to expand...
Click to collapse
Trying to sell tablet now. Going for galaxy tab 2
Sent from my SAMSUNG-SGH-I747 using xda premium
Wouldn't this work?
http://tobuygoods.com/product_info.php?language=en¤cy=USD&products_id=131
I have galaxy tab 2 for sale. Pm me for details...
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Rolandh said:
Would it be possible to charge while using an OTG Cable for Keyboard/Mouse or does the same principle apply as inn data via OTG & charge?
Roland
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Same principle. In normal OTG host mode the tablet powers the peripherals. A USB keyboard/mouse will be no exception to that.
intruda119 said:
I have no clue what im doing but this is what im playing with at the moment. Its a old dock for sgs2 i believe but it has a dc and usb input on the back of it.
Im about to this because i have very little patience for china.
http://www.amazon.com/gp/product/B008CQKM2U/ref=ox_sc_act_title_1?ie=UTF8&smid=A24Y22QERZZ9SS
Would get the cheaper one but the juiced one has a flexible cable vs the fixed usb on the other one. Would this be pointless though?
Click to expand...
Click to collapse
Sorry to resurrect an old thread but was wondering if you ever ended up getting that Juiced systems adapter and if it worked well with the N7. Been looking at it but haven't found any success stories on XDA with the N7, just the few Amazon reviews...
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
sadde said:
That cable would work but u need specific kernel tweaks for otg + charge to work. Pm me if anyone needs it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Why PM you, why not just put it up here, Anyway here you guys go
http://forum.xda-developers.com/showthread.php?t=1835720
I am interested in this kernel patch quite a bit. I have a galaxy note 2 (sprint version). What are the odds someone has figured out how to get power and otg working on the note 2?
erica_renee said:
there is NO data and charge at the same time. This is due to how the device switches from charge to usb mode thru the pin 4 . it senses rather a data cable or charge cable is being used . will not charge via otg..
there are several threads with experiments trying to get this work .You could use a wifi or bluethooth drive for data...
Click to expand...
Click to collapse
Ofcourse there is charge and otg at the same time by just simply shorting pins 4 and 5 with a resistor,in my case for xperia p , a 100k resistor does it.
Timurs USB ROM from another site is what you want. Has links and everything you need.
I was going to do a car install as well but after sourceing parts and work estimates ( I want clean install, like stock) just more hassle than its worth for me. Please post pics if you get an install going.
Sent from my Nexus 7 using XDA Premium HD app
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
I have this one
http://www.amazon.com/gp/product/B005GI2VMG/ref=oh_details_o01_s00_i00
Works perfectly with my thumb drives and external hdd. Not only does it work, but the price was unbeatable.
Don't buy one of those $10+ cables as it does the same exact thing as this one.
I might add, you could possibly look into getting one that can charge the device at the same time it's using an external storage device. Unless you're okay with it.
Stickmount works with root on my devices
Nexus Media Importer works without root on my devices
GNex and N10.
Hope this helps!
Confirmed that my OTG cable works.
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
Can you still get to the headphone jack with that cable?
Is there any long (length wise) USB OTG Cable?
So I can just keep the flash drive or external drive in my messenger bag and use my phone or tablet LOL.
Also will USB 3.0 work with the devices?
Lumsdoni said:
Can anyone recommend a decent USB OTG that hangs down the side of the nexus 10 rather than sticks out?
Preferably one they've proven to work with an N10.
I appear to have lost my Samsung one I was hoping to use.
Thank you.
Swype'd at pace from my Galaxy S2
Click to expand...
Click to collapse
I bought both of these. Both connect with the larger portion of the USB connector towards the screen so they hang down the side of the tablet:
SANOXY Micro USB Host Mode OTG Cable - The connector for this one was flipped from the picture and hangs down the side of my N10.
eForCity Micro USB OTG to USB 2.0 Adapter - This one came just like it was pictured.
Both came from Hong Kong which took about 2 weeks in the mail however they cost just around $1.00 each and with free shipping not much to lose.
I use mine with a elago Mobile Nano II USB 2.0 microSDHC Flash Memory Card Reader and a 32GB card (my 64GB is in my S3). With the adapter in the OTG cable it barely hangs out the bottom and makes it very compact.
I have 2 kinds of OTG cables here, both working perfectly fine with my Galaxy Nexus. However on Nexus 10 when I connect a USB device to the OTG (or connect the OTG cable with a USB device already plugged in) the tablet turns off completly and I have to remove the OTG to be able to start it again.
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
bschrib said:
OK -- Sorry to resurrect a glue'd horse, but does anyone have a link for one that ALWAYS ships the correctly sized (read not too long) OTG adapter? I've already ordered two of the OTG adapters through Amazon but they BOTH have too long of a connector and it basically sits loose in any device. Very lame.
Click to expand...
Click to collapse
I'm looking for one as well. The cheap ones from eBay are too long. They work but the connection is loose. Do NOT buy the ones linked below.
http://pages.ebay.com/link/?nav=item.view&id=300803544652
I bought THIS one from monoprice for $1.43 last week its on its way...ill report back when it arrives. Monoprice stuff is usually pretty good quality, hoping it is nice and secure
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
egrims said:
http://www.amazon.com/dp/B008CQKM2U/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Has anyone tried this? Says it will work with the Nexus 7 so I'm assuming the 10 as well? Would be nice to have all in one.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Just an FYI I e-mailed Juiced Systems to see if this would work with the Nexus 10. Their response is below:
The adapter should work with 4 out of the 5 functions for the Nexus 10(MHL maybe not). I have yet to test it out personally. This is something we will test soon and will post online. The nexus 10 does have an HDMI mini port built into it already. If MHL doesn't work that is because google did not think it was necessary to make it MHL capable when it has an HDMI mini port. The Nexus 7 is not MHL capable either, not sure why they chose to do that. I will keep you posted once the nexus 10 testing comes back.
Thank you
sunoryjim said:
Confirmed that my OTG cable works.
Click to expand...
Click to collapse
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
productofusa said:
confirming this one works, and its a really great fit, nice and tight not like the loose too long one.thanks for the link.
Click to expand...
Click to collapse
Can you still access the headphone jack with this OTG cable?
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
xeTaiz said:
Can anyone tell me how an OTG cable can be better than another except of the price/length/design ??
Isn't that micro USB to USB cable just a normal cable connecting 5 pins which are either in a bigger or a smaller plug?
Why should such a cable not work (except of the situation that the cable is damaged)?
Click to expand...
Click to collapse
I watched a video on how to make your own, if it was correct, they stated that one pin was unused and when it is connected to chassis ground tells the device to go into OTG mode.
So this OTG cable is not just connecting each pin? It's not just an adapter?
Okay then, good to know, thank you
lexlucas said:
Can you still access the headphone jack with this OTG cable?
Click to expand...
Click to collapse
If you took a razor knife to the strain relief part it would work, as it is you can stress it out of the way enough to fit a headphone jack but it puts a bit too much pressure on the USB port for my liking try it they're cheap!
i see most are using ones with a cable, is there an issue with ones like these?
http://www.overstock.com/Electronic...l?recSet=4e4a53cb-bea5-4a2e-aec6-88ea05c24288
http://www.ebay.com/itm/90d-right-A...160919848094?ssPageName=ADME:B:EOIBSA:SG:3160
I got 2 of this, works pretty well and sits close to the side of the tablet.
Only 2 issues, the connector itself is long so it's a little loose and it will block the earphone jack.
sorry if this question has been asked already but i looked around and cant find a answer. other than building your own, where can i buy/order one in the US? I want to root my new chromecast but cant find one. a link would be greatly appreciated
dcmbullet said:
sorry if this question has been asked already but i looked around and cant find a answer. other than building your own, where can i buy/order one in the US? I want to root my new chromecast but cant find one. a link would be greatly appreciated
Click to expand...
Click to collapse
http://www.miniinthebox.com/usb-fem...msung-galaxy-s3-i9300-and-others_p504487.html here you go m8
bormeth said:
http://www.miniinthebox.com/usb-fem...msung-galaxy-s3-i9300-and-others_p504487.html here you go m8
Click to expand...
Click to collapse
are you sure this is the cable needed to root the chromecast? i appreciate the help
Here's another one that's 20c cheaper.
usb-female-to-micro-usb-male-micro-usb-female-otg-cable
Amazon, eBay or even mom-and-pops electronics store, if you can find one nearby, should have it. Or the guy with computers/electronics in the last row of your local flea market may have one....
Sent from my TF300T using Tapatalk 4
Correct me if I am wrong, but I thought I had read that if you have a simple powered usb hub, that will work also?
Sent from my SPH-L710 using Tapatalk 2
pdaddy said:
Correct me if I am wrong, but I thought I had read that if you have a simple powered usb hub, that will work also?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
i would also love to know if this is true because i can always find one of those
dcmbullet said:
i would also love to know if this is true because i can always find one of those
Click to expand...
Click to collapse
A powered USB hub should work Just test it out, the worst thing that could happen is that it will boot stock image, just pull the power to stop it.
Hey guys.
I'm in NYC for a few days and I'm looking for an OTG cable, powered or not. At best buy and at radioshack they look at me like I'm asking for the impossible. I'll be in towns until Tuesday, and I'd like to ask if anyone knows a store where I could buy this cable.
Thanks in advance.
Sent from my Nexus 4 using Tapatalk
loplo said:
Hey guys.
I'm in NYC for a few days and I'm looking for an OTG cable, powered or not. At best buy and at radioshack they look at me like I'm asking for the impossible. I'll be in towns until Tuesday, and I'd like to ask if anyone knows a store where I could buy this cable.
Click to expand...
Click to collapse
Sorry to say, I have yet to see a powered OTG cable in a retail store, even my geeky local "has a majority of stuff Monoprice carries" store does not have this particular type of cable.
If B&H Photo/Video has these in stock, it should work (but it'll cost more than getting the OTG cable on eBay)
Pioneer DJC-WeCAi 2.6' DJ Controller Cable - $29.00
Neutrik NAUSB-B USB Female Type-A to Type-B Converter - $5.21 (If you can find an equivalent that's not designed for panel mount, all the better)
Comprehensive On-The-Go USB A Female to Micro USB B Male Adapter Cable (4") - $2.99
-OR- NTW USB Type A Female To Micro USB Type B 5-pin On-the-Go (OTG) Pigtail Adapter - 4" - $5.99
-OR- StarTech Micro USB Male to USB OTG Host Adapter Female (5") - $5.99
$37.20 or $40.20 (if you go with a more-expensive OTG adapter) plus tax...
more expensive than the Chromecast itself but everyone has priorities.
Connections would be:
Pioneer cable RED A (flat) end --> Chromecast wall power adapter
Pioneer cable BLACK A (flat) end --> USB OTG adapter cable
Pioneer cable B (square) end --> USB A-B converter --> plug your USB Stick in here
USB OTG adapter cable --> Chromecast
You might find the right parts to get this cheaper, you just need to plan it out in your head. I was just sticking with stuff B&H has since they're in NYC.
Thanks,
I was planning a visit to B&H, but now it became mandatory.
I'll try the one from #3. I could wait until I get home, but can't leave NYC without rooting or bricking my Chromecast, in my hotel room.
Sent from my Nexus 4 using Tapatalk
loplo said:
Thanks,
I was planning a visit to B&H, but now it became mandatory.
I'll try the one from #3. I could wait until I get home, but can't leave NYC without rooting or bricking my Chromecast, in my hotel room.
Click to expand...
Click to collapse
Just so we're 100% clear, you'll need 3 total pieces to make it work - the Pioneer cable, the USB A female to B female adapter, and one of the OTG cables.
I also hope you've already checked your serial number against the rootable serial numbers and you know that the hotel's TV may not have HDMI enabled, and even if it does, its WiFi probably won't allow Chromecast to work.
If you brought your own wireless router, then you only have to deal with the TV though. Actually, if possible, I would take everything you need
with you to B&H. If you explain what you're trying to do, they might let you borrow an input on one of their TVs - then you won't have to worry about the hotel TV being locked, unless you already know it's not.
Good luck!
Just to add these cables are usefull for more than just hacking a Chromecast.
I use one to connect Hard Drives to my Xoom (Tablet) since my ROM supports OTG.
Sn are 3920 3921 3922, this shouldn't be a problem. Ref cables I'll take a look at the links later at the hotel. Thanks for your input.
Sent from my Nexus 4 using Tapatalk
I typically check amazon a couple times a day to see if there are any new accessories available. Today I see there's a 36-pin usb data/charging cable available for $8.99 US. It's only 1 meter, so same size as the one that comes with the tablet, but at least there's finally something.
USB Charging Cable for TF701
Aaroneious said:
I typically check amazon a couple times a day to see if there are any new accessories available. Today I see there's a 36-pin us b data/charging cable available for $8.99 US. It's only 1 meter, so same size as the one that comes with the tablet, but at least there's finally something.
A thought: if I plug this into a usb3 hub I can use flash drives etc w/o the dock. The cable that comes with charger can probably do the same. Maybe this is already obvious to others.
Click to expand...
Click to collapse
will this charge? via any plug? i.e. phone usb plug or the computer usb port
mikesull said:
A thought: if I plug this into a usb3 hub I can use flash drives etc w/o the dock. The cable that comes with charger can probably do the same. Maybe this is already obvious to others.
Click to expand...
Click to collapse
Which 3.0 Hub has a normal USB connection for input? Otherwise this won't work. Any links?
Sent from my HTC One using Tapatalk
wakkaday said:
will this charge? via any plug? i.e. phone usb plug or the computer usb port
Click to expand...
Click to collapse
No, you still have to use the wall plug that came with the tablet since it uses a different voltage than normal microUSB chargers. You can use the wall plug that came with the tf700 however.
Sent from my K00C using XDA Premium 4 mobile app
mikesull said:
Aaroneious said:
I typically check amazon a couple times a day to see if there are any new accessories available. Today I see there's a 36-pin us b data/charging cable available for $8.99 US. It's only 1 meter, so same size as the one that comes with the tablet, but at least there's finally something.
A thought: if I plug this into a usb3 hub I can use flash drives etc w/o the dock. The cable that comes with charger can probably do the same. Maybe this is already obvious to others.
Click to expand...
Click to collapse
Unfortunately, no, usb hubs dont work that way - it's the wrong connection type. There is, however, an OTG connector available now (at least in the US) that will allow you to connect a hub.
Sent from my K00C using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have an MHL to HDMI Cable (from cable matters)....it said it would charge my note 2 ...but it clearly DOES NOT.....
so
My question is ....is there one that WILL charge my note 2 while using the adapter. I can't find one...and some I have come across manufacturer says it won't charge...that's why I'm asking you fine people. ...THANKS
Sent from my SCH-I605 using Tapatalk
http://www.ebay.com/itm/Smart-Dock-...S_Cell_Phone_PDA_Chargers&hash=item3f282bb1c3
I have this and it will charge your phone while using hdmi out, with mouse and keyboard, and an external usb hdd connected. While it is not a cable like you were asking about it will do what you want and you can look around and find many different prices from $25-$75.
jlmancuso said:
http://www.ebay.com/itm/Smart-Dock-...S_Cell_Phone_PDA_Chargers&hash=item3f282bb1c3
I have this and it will charge your phone while using hdmi out, with mouse and keyboard, and an external usb hdd connected. While it is not a cable like you were asking about it will do what you want and you can look around and find many different prices from $25-$75.
Click to expand...
Click to collapse
I actually have that....and for me....the HDMI is speculate at best....I will try it again (I use it for night docking purposes)
I was actually looking for MHL to HDMI Cable
Sent from my SCH-I605 using Tapatalk
ganggreen777 said:
I actually have that....and for me....the HDMI is speculate at best....I will try it again (I use it for night docking purposes)
I was actually looking for MHL to HDMI Cable
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I do not believe so. Every (just) cable that I have tried so far has not worked so far.