Bluetooth is very weird on CM11. I have one device (Motorola H730) which would auto connect when I turn it on. But on this other bluetooth device (Flexsmart X3) would not auto connect. I have to remove it from my phone and re-add every time I want to use Flexsmart X3. Anyone know why this is happening? Both devices works fine on my old android phone.
Related
Are there any app's available which allows the Bluetooth on my Hero to be set as always discoverable. My handsfree car kit used to auto connect to my old Windows mobile device but now I have to make my Hero discoverable every time I enter my car and its very annoying.
DITTO
i would love this too, as it is a pain in the arse having to activate it all the time. Another stupid "improvement" from HTC.....what the hell were they thinking ???
You can add a Bluetooth On/Off Widget on one of the home screens.
Once the Hero is paired the devices should discover themselves with no issue. Set to discoverable or not.
My car kit very very rarely does not see and auto connect to the Hero. On the odd occasion that it doesn't connect, turning Bluetooth on and off via the HTC widget usually gets it hooked back up.
Its not perfect, but TBH no less perfect than other handsets I've owned.
Bluetooth file transfer is what we are really missing.
Having a nightmare with my car kit - PARROT CK3100 LCD and T-mobile G2
I have to turn on bluetooth make it discoverable the enter the pairing code ( everytime as it does not seem to keep the code) then the Parrot LCD flashes " MEM FULL " twic and then it connects but does not see the address book
Any suggestions much appreciated
Devchef1
Flash it
I was having very similar problems connecting my Hero to my car Bluetooth, it just would not pair, or work , i have flashed the official HTC update rom onto my Hero and now it connects everytime, no discover mode needed, and it works like a dream, you might want to give it a go, i fixed my issues .
Devchef1
I don't know why you have to keep pairing - mine auto detects no prob - both on stock G2 rom and Modaco 2.2e.
I can help you with the address book though - put a contact on your sim card. Anything will do, just make one up. Thereafter, I think you'll find your address book syncs.
Haven't seen the mem full thing, but I do recall you can only have five devices paired to the ck3100, so maybe you need to delete a pairing?
Cheers.
Rich
Android Bluetooth Discoverable Mode
Hi!
I'm having a similar problem with trying to keep the bluetooth on discoverable mode for some longer time as well. The phone I'm working with is the Nexus One and I was hoping anyone could help finding a way to get the app to turn on the discoverable mode automatically without having to request the user every 120 seconds or 300 seconds? The API for Bluetooth really limits me from making the duration of the discoverable mode longer and allowing me to change the bluetooth setting without user permission. Any help is appreciated.
Thank you!
AndroidTeam5
That is well and great that it reconnects for many people. But, for many people it does not! I have Myn's Donut running from my sd on my HTC Touch. It never auto-connects to my Pioneer Avic-f90bt. I have to make it discoverable or turn the bluetooth off/on every time I get in the truck. When I run the phone with WM6 it always, always auto connected...always. So if the easy fix is an app to leave bluetooth on, how hard can it be for a programmer to do this. Simply saying "oh, it works fine on my phone" doesn't help us!
I have a Captivate (i896) running CM9 (the latest nightly build) and am enjoying CM9 immensely. The only problem I have with it is that the Bluetooth will not automatically connect to devices that it is already paired with.
Here is an example, I get in my car and the car tries to connect to the phone but cannot, even though bluetooth is on and ready to go. It will connect if I go into the bluetooth settings on the phone and tell it to connect. If it helps, it is the Ford sync system in the car. I am having the problem though to varying degrees with any bluetooth device.
Any thoughts?
Anyone else experience bluetooth connectivity issues on the new 4.2.2 firmware?
My car and BT headphones now take a lot longer to connect and disconnect to the phone compared to previous firmware.
In fact, the first time (after the update) i needed to manually connect to each deivce, almost like I had to remind the phone it was paired with them.
In comparison, my Nexus devices connect almost immediately on 4.2.2
Can anyone who is on 4.2.2 help test this?
Help confirm whether it is just me experiencing this or not. Thanks.
I have the same problem with my Mercedes BT System.
I connect my phone and lost my connection in 3-4min. After 10sec its connected again.
So my temporary work around was this:
1) Disconnect the Phone with my car
2) Clear Connetcion
3) Start new search and conntect the phone to BT
4) Didn´t allow the Mercedes BT to use my sms, contacts and so on.
With this it´s working if the BT System didn´t check my sms and contacts. But erverytime when I switch of the connection or car, I have to disallowed the BT System to check sms and contacts --- so this is only temporare and I hope for a better solution!
(Sry for my writen english - its bad )
My Bluetooth devices connected very quickly.
And no problems with sms and contact request?
Do you made a fullwipe?
My BMW simply won't pair with my XZ since updating to 4.2.2 - was working fine before on 4.1.2, but when I try to pair now, they recognise eachother, and I enter a code on the car to be verified on the phone, but after I enter the code on the phone, it all just freezes. The car sits there saying "Pairing...", but the phone thinks it's all been successful.
I have a bose audio system in my car, my XPERIA Z running PAC Rom - will pair, no audio or phone book exchange, My Dads Xperia z Works fine with stock rom. there is some issue I think with 4.2.2 maybe? I tried the Audio v19 and bluwtooth fix. NO LUCK!
Yes.. Having the same problem as well with Volvo's sensus multimedia system. It used to work fine.. Now it takes multiple tries to get it to connect since 4.2.2
I have the same problem.
I am having the same problem with the sbh25.
When i turn on the headphones my phone registers the pairing but no sound will be on. I have to manually turn the phone to speaker output then back to headphones for the music to stream through the bluetooth headset. This works first time 9/10 times. The other time i have to repeat the output step a couple of times for the music to be heard.
I had a couple of issues too with the latest 4.2.2. on my Kenwood system in the car.
This is terrible, clearly Sony did not thoroughly test the BT stack in this latest firmware.
I can honestly say, BT was pretty much working perfectly on 4.1.2 firmware. I may have to consider downgrading.
Thanks for everyones confirmation.
Hello!
I bought an SBH20, paired with my XZ via NFC, listened to music, then disconnected the headset, using the NFC.
After a while, i tred to connect again via NFC but all i get is a 'connecting' message, BT turning on -white BT icon- but no real connection, therefore the BT turns off.
After several tries it finally connects, but it's not reliable this way.
I noticed, if i enter to settings(not turning anytihng on/off) and trying to connect (still using NFC), everything works fine: connects, disconnects perfectly, and handles the BT as it should.
I've reseted the headset, tried single and multi point modes aswell. Deleted the BT devices, then repaired, still got the problem.
Am i doing sth wrong? I want to connect and disconnect the headset with a simple touch, and not toggling the BT manually (NFC yeah...) Is this something, SBH20 is not compatible with?
(btw sony support says: "For subsequent connections between devices that have already been paired once, make sure that Bluetooth™ is turned on so that the devices can connect automatically." If it's a "must" , then what is the [email protected] use of the NFC??? Just to pair once???)
Please share your experiences! Any advice would be greatly appreciated!
Thanks for reading ( and sorry for my english)
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
fl4r3 said:
I actually have the same problem using the SBH50. For me sometimes it connects perfectly fine, other times it doesn't and I have to go into bluetooth settings after which it seems to connect properly.
I have noticed that it also depends on how I disconnect it; if I remember to touch the headset to disconnect then next time when I try to connect I have more chance of it being successful. Also, when I try to connect I hold the headset aganist the phone even after the ‘connecting’ popup until I get the 'connected' popup.
These are just work-arounds which aren’t always 100% successful though so would be good to find out what the proper method is.
Click to expand...
Click to collapse
It is a real shame... In my case it's the opposite, if i touch the headset to disconnect, the next nfc-connect tends to be less successful.
(and i noticed that it also matters if i turn off the headset after disconnected, or not)
And what is really odd, that i don't have to do anything in the settings menu ( or bluetooth settings) just open it, and everything works like a charm...( all connect or disconnect tries are succesfull, no exception, even if i push the headset repeatedly to the pohone's back)
I'm not affraid to mod some system files, apps, maybe build.prop tweaks, but i don't know where to start. In bulild.prop there are only a few nfc related lines (tried to enable/disble those)
So i'm not alone...maybe even more people are in the same boat, trying to solve this.
Again; any related info is welcome
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
swtam said:
I also have a sbh50 but i normally disconnect by turning off the headset. I have set it in smartconnect to turn off bluetooth automatically when the connection shuts off but it doesnt always do that.
It reconnects with no issues when bluetooth is on and i turn the headset on again. I use the nfc tap only for the initial pairing.
The only issues I have is the google music skipping issue that i posted the other day and the gmail smart connect not working on the sbh50
Click to expand...
Click to collapse
Well, then we don't have the same issue. I tought i could use the nfc for connect/disconnect (i actually still think it is capable of that, just sony messed up sth)
Could you try to connect/disconnect and connect again with your devices, please :angel:
I'm really curious about this whole nfc story ( why does the headset have the chip/tag if it only works for initial pairing -its not a big deal to pair manually, especially that it has to be done just once-, and on the other hand: if i put nfc in the device, why not put in this functoin too- not a big deal: a proper working BT toggle, but it brings a tad more functionality-
I recently purchased a bluetooth headset (Audionic B-666), but I am unable to use it to its fullest.
Whenever I connect headset while my wifi is on, internet connection stops working. Chrome shows not connected to internet.
If I connect headset first and then connect wifi, headset disconnects.
Headset works fine with my falcon and laptop.
I am running fully stock 5.1.1. Updated to build 10.7.A.0.222.
I know it is a known bug. Is there any permanent solution to it? I have read on different forums that factory reset will fix it temporarily. Is there any way to fix it without returning the device?
Or my only chance is to flash a custom ROM?
Anyone?