[Q] Cant unroot+install stock RUU - One (M7) Q&A, Help & Troubleshooting

Please help me
I try to unroot my HTC One. I used the "HTC one AIO kit" for that and now I'm stuck in the follow picture:
***Tampered***
***Relocked***
***Security Warning***
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-
eMMC-boot 2048 MB
Aug 9 2013 16:15:36.0
HBOOT
Blablabla..
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
SHOW BARCODE
The problem is that I can not install the original RUU (Danish version) I get an "Error 155" when I do it. I have tried to make S-Off from the "HTC One AIO kit", but it says "device not found"

You are S-On. Most likely that's why can't install RUU. you should look yo install ARHD 31.6 and S-off. Then you can install RUY
sent from my mobile device

SaHiLzZ said:
You are S-On. Most likely that's why can't install RUU. you should look yo install ARHD 31.6 and S-off. Then you can install RUY
sent from my mobile device
Click to expand...
Click to collapse
I downloaded the android revolution 31.6 and tried to install via cmd. But it goes to say the following:
..sending zip (1161503 kb).. OKAY
..writing `zip`..infosignature checking..
FAILED (remote: 12 signature verify fail)

mohbar said:
I downloaded the android revolution 31.6 and tried to install via cmd. But it goes to say the following:
..sending zip (1161503 kb).. OKAY
..writing `zip`..infosignature checking..
FAILED (remote: 12 signature verify fail)
Click to expand...
Click to collapse
you don't send the zip you flash in from custom recovery

clsA said:
you don't send the zip you flash in from custom recovery
Click to expand...
Click to collapse
When I go into Recovery, i get the picture with af phone and a red triangle in it..

mohbar said:
When I go into Recovery, i get the picture with af phone and a red triangle in it..
Click to expand...
Click to collapse
unlock your bootloader at htcdev.com and install custom recovery (TWRP)

clsA said:
unlock your bootloader at htcdev.com and install custom recovery (TWRP)
Click to expand...
Click to collapse
Ok, now I installed TWRP 2633
But how can I then install the ARHD 31.6 and s-off ? I have download the ROM on th PC but cant establish file connection with the pc ?

mohbar said:
Ok, now I installed TWRP 2633
But how can I then install the ARHD 31.6 and s-off ? I have download the ROM on th PC but cant establish file connection with the pc ?
Click to expand...
Click to collapse
boot your phone in TWRP main menu, make sure your arhd zip is in your adb/fastboot folder of your computer.
Code:
adb push <name_of_rom_file>.zip /sdcard/
then in twrp select ''install''

alray said:
boot your phone in TWRP main menu, make sure your arhd zip is in your adb/fastboot folder of your computer.
Code:
adb push <name_of_rom_file>.zip /sdcard/
then in twrp select ''install''
Click to expand...
Click to collapse
Finally i can start up the phone again - thanks for that. So now how can I s-off it and unroot the device..?

Yes.
sent from my mobile device

SaHiLzZ said:
Yes.
sent from my mobile device
Click to expand...
Click to collapse
Yes to what? Im asking how can i change the phone from s-on to s-off ..?

mohbar said:
Yes to what? Im asking how can i change the phone from s-on to s-off ..?
Click to expand...
Click to collapse
follow rumrunner s-off guide here http://forum.xda-developers.com/showthread.php?t=2488772

alray said:
follow rumrunner s-off guide here http://forum.xda-developers.com/showthread.php?t=2488772
Click to expand...
Click to collapse
Ok Ill try that..

alray said:
follow rumrunner s-off guide here http://forum.xda-developers.com/showthread.php?t=2488772
Click to expand...
Click to collapse
Hmm It says error: run rumrunner again and READ (no adb connettion to the device. Debugging on??Drivers?)
I have debugging on and installed the drivers. And I have tested that adb connection is there for the device (show serial code to the device)
I have closed all antivriuses (Bitdefender and windows firewall).
I click on soju.exe when I have the phone opened in the program (ROM) HTC sense.
Any ideas..?

make sure your phone is connected via a USB 2.0 port - forsome reason it doesn't like USB 3.0.
also are you using the old method or the universal method? i suggest finding your phone's mainversion via ADB and see if there's a rumrunner app that matches the main version number.

thegh0sts said:
make sure your phone is connected via a USB 2.0 port - forsome reason it doesn't like USB 3.0.
also are you using the old method or the universal method? i suggest finding your phone's mainversion via ADB and see if there's a rumrunner app that matches the main version number.
Click to expand...
Click to collapse
I have tried the universal one here: http://rumrunner.us/downloads-2/
I also tried one of the verizons with ROM: 1.10.605.2 and everything was ok, until I get a message "Fu*k it..............continuously......."
How can I see mainversion via adb?

Related

Can't install clockwork?

Unlocked bootloader fine, when I go to install clockwork it does the following.
sending 'recovery' <3700 KB>
Thats as far as it goes, I left it sitting 30 mins and nothing, so disconnected tried again and same issue.
When I disconnect it says.
FAILED <data transfer failure To many links
Any idea?
slugger09 said:
Unlocked bootloader fine, when I go to install clockwork it does the following.
sending 'recovery' <3700 KB>
Thats as far as it goes, I left it sitting 30 mins and nothing, so disconnected tried again and same issue.
When I disconnect it says.
FAILED <data transfer failure To many links
Any idea?
Click to expand...
Click to collapse
What is your PC platform? Windows or Linux? If it is Windows, do you have the latest ADB/FASTBOOT drivers loaded?
tpbklake said:
What is your PC platform? Windows or Linux? If it is Windows, do you have the latest ADB/FASTBOOT drivers loaded?
Click to expand...
Click to collapse
Running Windows. I have a folder called Android and in it are adb and fastboot, not sure how I install them, I did install some things when unlocking the bootloader
try to install the recover in PG32IMG format
This may seem like odd question do u have S-OFF and have you installed Super user?
if you have try installing rom manager from your device you can get it for free in the market from there you can install clockworks right away from that program.
I hope i have helped.
As I asked a friend bought me an IncS oversea, he updated to the latest version thus I'm having hboot 2.0. I have unlocked the device using htcdev, now can I flash CWM through ROM Manager? I'm new to HTC devices.
bigeyes0x0 said:
As I asked a friend bought me an IncS oversea, he updated to the latest version thus I'm having hboot 2.0. I have unlocked the device using htcdev, now can I flash CWM through ROM Manager? I'm new to HTC devices.
Click to expand...
Click to collapse
I would say so as its what the app is designed for, but as I have never used ROM Manager I cannot be 100%.
I have always flashed recovery through fastboot
So after htcdev unlocked I can just follow this http://forum.xda-developers.com/showthread.php?p=14693680 ? As I can't S-OFF using rev tool.
bigeyes0x0 said:
So after htcdev unlocked I can just follow this http://forum.xda-developers.com/showthread.php?p=14693680 ? As I can't S-OFF using rev tool.
Click to expand...
Click to collapse
Yes you can do this
also stuck on the same step:
My phone:
Vivo PVT SHIP S-OFF RL
hboot- 6.13.1002
I tried for Revolutionary and fastboot:
Revolutionaty:
"Flashing recovery over fastboot" and there was no end
Fastboot:
" FAILED (status read failed(Too many links))"
Whats i do wrong?
Hey is HTC sync installed in ur pc...????are android drivers installed to...???while sending recovery to device have you enabled fastboot-USB mode...????
Sent from my HTC Incredible S using xda app-developers app
JohnDavids said:
also stuck on the same step:
My phone:
Vivo PVT SHIP S-OFF RL
hboot- 6.13.1002
I tried for Revolutionary and fastboot:
Revolutionaty:
"Flashing recovery over fastboot" and there was no end
Fastboot:
" FAILED (status read failed(Too many links))"
Whats i do wrong?
Click to expand...
Click to collapse
Try the procedure in this link:
http://forum.xda-developers.com/showthread.php?p=14693680

[Q] Trouble while trying to unroot HTC One

Hello everyone,
I have a HTC One which I want to unroot. I downloaded several Ruu's, but al of them gave the same error. The relocking of the bootloader was succesful. But then the story begins. It is first trying to "Update signature" (Not sure for the exact English words, because its in dutch). Then an error window comes up witch says that i have to find the right update tool and should try again.
I tried several times, but with the same result. I first tried to unroot from Android Revolutioin HD 12.0, then I tried a different rom to unroot from, Vanilla Rootbox. I also removed the HTC drivers and installed them again.
When I try to unlock the bootloader again, the phone runs into a bootloop. So my phone is useless at the moment.
edit: Oh, if forgot: when in bootloop, I can enter bootloader/recovery with vol down/power, but in recovery i cant acces my internal sd-card...
Can someone please help me?
What is your CID? You have to use the correct RUU for your phone unless you're supercid or s-off. Any other will fail.
iElvis said:
What is your CID? You have to use the correct RUU for your phone unless you're supercid or s-off. Any other will fail.
Click to expand...
Click to collapse
According to the guide it was sufficient to pick any Europe Ruu. But my cid was HTC__E11 i thought....
Which guide are you using?
iElvis said:
Which guide are you using?
Click to expand...
Click to collapse
It's a dutch one.
Translated summary:
- Download the right Ruu, it has to have HTC Europe in the name link
- Download/extract mini sdk link
- Boot in fastboot
- CMD: fastboot oem lock
- Run ruu.exe, follow instructions
wybren said:
It's a dutch one.
Translated summary:
- Download the right Ruu, it has to have HTC Europe in the name link
- Download/extract mini sdk link
- Boot in fastboot
- CMD: fastboot oem lock
- Run ruu.exe, follow instructions
Click to expand...
Click to collapse
That's the correct procedure. Did you try the 1.29 Europe RUU? Did you ever change your CID?
iElvis said:
That's the correct procedure. Did you try the 1.29 Europe RUU? Did you ever change your CID?
Click to expand...
Click to collapse
I tried the 1.28.401.7_ and the 1.20.401.1
Why/how should I try to change my CID?
Can't find a proper 1.29 ruu file. Can somebody please help me out? Im even willing to pay for it :crying: PM me
You need S-OFF to flash an older RUU as otherwise you cannot downgrade the bootloader
EddyOS said:
You need S-OFF to flash an older RUU as otherwise you cannot downgrade the bootloader
Click to expand...
Click to collapse
That's a good point. OP, what's on your bootloader screen? Did you ever flash the new firmware?
iElvis said:
That's a good point. OP, what's on your bootloader screen? Did you ever flash the new firmware?
Click to expand...
Click to collapse
Now my bootloader screen says:
Tampered, unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
April 20 2013 15:46:23:14316
As last I flashed Android Revoluiton HD 12.0, and after that the latest Vanilla Rootbox..
When I open custom recovery, it begins with saying:
ClockworkMod Recovery v6.0.3.0
E: Can't mount /cach/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Afterwards I tried to push a rom zipfile using ADB, first I tried to push to /data/media/0/:
"Failed to copy 'rom.zip' to '/data/media/0/': Is a directory"
Then It succeed using /data/media/ but when I tried to flash, it said "Can't mount /sdcard/"
So is trying to S-off the still the right way?
I suspect the RUU is failing because you've got a 4.2.2 rom and you've been trying to flash 4.1.2 RUUs, so it's failing the version check even though you have your original hboot. Try flashing a stock 4.1.2 rom, and if that doesn't work, try s-off.
iElvis said:
I suspect the RUU is failing because you've got a 4.2.2 rom and you've been trying to flash 4.1.2 RUUs, so it's failing the version check even though you have your original hboot. Try flashing a stock 4.1.2 rom, and if that doesn't work, try s-off.
Click to expand...
Click to collapse
I have no clue how to flash a rom right now, see my last post. Can't flash anything in recovery...
wybren said:
I have no clue how to flash a rom right now, see my last post. Can't flash anything in recovery...
Click to expand...
Click to collapse
Just download the ruu.exe file to your PC, turn oo your phone on and connect it to your PC (driver should be installed).
Just double klick at the ruu.exe file and wait ... you have to confirm some popups ..
But i´m not shure if it is possible to downgrade the hboot even with s-off anybody tried already?
Bajo76 said:
Just download the ruu.exe file to your PC, turn oo your phone on and connect it to your PC (driver should be installed).
Just double klick at the ruu.exe file and wait ... you have to confirm some popups ..
But i´m not shure if it is possible to downgrade the hboot even with s-off anybody tried already?
Click to expand...
Click to collapse
I already tried two ruu's, 1.20.401.1 and 1.28.401.7, with the same result: Stops when it is trying to update the signatures, and then says I have to look for a more proper ruu...
Ok, so follow this instructions to get s-off.
here
when done flash the ruu.exe you already downloaded again
Bajo76 said:
Ok, so follow this instructions to get s-off.
here
when done flash the ruu.exe you already downloaded again
Click to expand...
Click to collapse
Already at the first step I got this:
c:\adt\sdk\platform-tools>adb push revone /data/local/tmp/
failed to copy 'revone' to '/data/local/tmp/': Is a directory
What dooes it says if you type
adb shell
?
Bajo76 said:
What dooes it says if you type
adb shell
?
Click to expand...
Click to collapse
It shows an '~ #' and a blinking '_'
ok download this and save it to folder:
c:\adt\sdk\platform-tools
Enable usb-debugging on phone (developer tools)
Boot your phone normaly (Dont turn it off) and connect it through usb wih your pc.
Then type the command again:
adb push revone /data/local/tmp/

[Tutorial][Rescue]Sprint HTC One users that flash GSM roms on their CDMA devices.

Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users on the latest 4.3/4.4.2 OTA are flashing 4.3/4.4.2 GSM roms and soft bricking their devices lately.
I have personally rescued a several devices in the past couple months so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
This guide is for Sprint HTC One users only.
3.04.651.2 RUU Thanks @OMJ
3.05.651.6 RUU From HTC
4.06.651.4 RUU Thanks @OMJ and @-viperboy-
5.03.651.3 RUU Thanks @OMJ **Note you will have to update your hboot to 1.57 in order for this RUU to work...solution is flash the 5.03.651.3 s-on firmware first.**
5.05.651.2 RUU
6.23.651.6 RUU Latest from htc.com
Device not recognized? (If you are using Windows 8.1 this will most likely not work unless your hboot is 1.55 or 1.56 or 1.57)
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
Latest HTC Drivers AFH
Video showing how to flash the firmware Thanks @thoughtlesskyle
If you are S-OFF flash
3.04.651.2 s-off firmware
3.05.651.5 s-off firmware
3.05.651.6 s-off firmware
4.06.651.4 s-off firmware
5.03.651.3 s-off firmware
5.05.651.2 s-off firmware (Sense 6) and you are done.
If you are already on 4.06.651.4 or 4.06.651.9 you will have to flash the 3.05.651.6 s-off firmware first...reason being is the 4.06 s-off firmware does not have the latest radio included (use the same commands from 5.)
6.23.651.6 s-off firmware Latest and most likely the last.
**Note the 5.03.651.3 firmware has a new radio so no need to flash the older version to get the radio.**
If you are s-on follow these steps ALL the way to the end (there are no shortcuts unless you are s-off and step 9 is optional as noted)
1.Download
3.04.651.2 s-on firmware
3.05.651.5 s-on firmware
3.05.651.6 s-on firmware
4.06.651.4 s-on firmware
5.03.651.3 s-on firmware
5.05.651.2 s-on firmware (Sense 6)
6.23.651.6 s-on firmware Latest and most likely the last.
2.Rename it firmware.zip (put the firmware.zip into the platform tools folder or the folder attached below)
3.Boot to bootloader
4.Lock bootloader(fastboot oem lock)
5.Then use these commands:
Code:
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
6.If you get this error after the second command(most likely will)
Code:
failed 90 hboot pre-update! please flush image again immediately
press the UP Arrow on your keyboard and press enter to issue the command again.
7.Then unlock the bootloader again and re-flash Latest TWRP. (before formatting go to setting/screen and disable screen timeout)
8.Within Latest TWRP select Wipe > Format Data(it will ask you to confirm by typing YES) once done adb push a rom to your phone (adb push nameofrom.zip /sdcard/ ).
8a. If you are using the 4.06.651.4 s-on firmware I would suggest you push this Stock Rooted Odexed Rom to your device or it may not boot.
8b. After flashing the 4.06.651.4 rom you will most likely need to flash the latest radio because the 4.06 firmware does not have a radio included find it HERE
8c. If you are using the 5.03.651.3 s-on firmware I would suggest you push this 5.03.651.3_Stock | Rooted | 4.4.2 | Sense 6 to your device or it may not boot.
8d. If you are using the 6.23.651.6 s-on firmware I would suggest you push this [STOCK ROM] [5.0.2] [SENSE 6] Sprint 6.16.651.2 AND 6.23.651.3 to your device or it may not boot.
9.Optional but recommended: S-OFF using Sunshine
10.Win lol :victory:
Thanks @OMJ for the firmware
Thanks @thoughtlesskyle for the 5.03.651.3 firmware and stock odex rom
Thanks @beaups and @Fuses for Rumrunner and Firewater
Thanks @WayneQuasar for helping me figure out the correct order to do these steps(many hours and many failed attempts before we figured it out lol)
If you need assistance I'll be happy to help.
If you need help add me on hangouts [email protected]
First come first served please tell me your XDA name and a link to what you are having problems with.
bigdaddy619 said:
Hello XDA,
I have noticed a lot of Sprint(CDMA) HTC One users on the latest 4.3 OTA are flashing 4.3 GSM roms and soft bricking their devices lately.
I have personally rescued a few devices in the past week so I'm posting this guide in hopes that it will save some headaches and stress for Sprint users.
This guide is for Sprint HTC One users only.
Device not recognized? (If you are using Windows 8.1 this will most likely not work)
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
1.Download the s-on firmware zip
2.Rename it firmware.zip (put the firmware.zip into the folder you use to open your cmd window or the folder attached below)
3.Boot to bootloader
4.Lock bootloader(fastboot oem lock)
5.Then use these commands:
Code:
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Fastboot reboot-bootloader
6.If you get this error after the second command(most likely will)
Code:
failed 90 hboot pre-update! please flush image again
press the UP Arrow on your keyboard and press enter to issue the command again.
7.Then unlock the bootloader again and re-flash TWRP.
8.Within TWRP select Wipe > Format Data(it will ask you to confirm by typing YES) once done sideload or adb push a rom to your phone.
9.Optional but recommended: S-OFF using Rumrunner
10.Win lol :victory:
Thanks @OMJ for the firmware
Thanks @beaups and @Fuses for Rumrunner
Thanks @WayneQuasar for helping me figure out the correct order to do these steps(many hours and many failed attempts before we figured it out lol)
If you need assistance I'll be happy to help.
Click to expand...
Click to collapse
I have followed your steps exactly, after I flash TWRP I try to enter recovery and it says "entering recovery..." for a few seconds then goes to a normal boot to a black screen. What should I do?
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
bigdaddy619 said:
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
Click to expand...
Click to collapse
I think so, but I am going to try with the link you gave.
---------- Post added at 11:00 PM ---------- Previous post was at 10:53 PM ----------
bigdaddy619 said:
Did you flash the Sprint version of twrp
http://techerrata.com/browse/twrp2/m7wls 2.6.3.0
Click to expand...
Click to collapse
Okay this worked!! Sorry I am very new to this, I know how to sideload, but what ROM should I use? I just want to get to stock rooted. does that mean OMJ's?
MacSkizzle said:
I think so, but I am going to try with the link you gave.
---------- Post added at 11:00 PM ---------- Previous post was at 10:53 PM ----------
Okay this worked!! Sorry I am very new to this, I know how to sideload, but what ROM should I use? I just want to get to stock rooted. does that mean OMJ's?
Click to expand...
Click to collapse
You can use OMJ's stock rooted or there is a Reset tool in Development if you want completely stock
bigdaddy619 said:
You can use OMJ's stock rooted or there is a Reset tool in Development if you want completely stock
Click to expand...
Click to collapse
Thank you so much! You really don't know how much stress you've relieved from me.:highfive:
MacSkizzle said:
Thank you so much! You really don't know how much stress you've relieved from me.:highfive:
Click to expand...
Click to collapse
NP good luck and yes I do know I help 2-3 a day haha
bigdaddy619 said:
NP good luck and yes I do know I help 2-3 a day haha
Click to expand...
Click to collapse
You aren't in the clear yet. When I start ADB sideload, it forever says starting adb sideload feature... What now?
MacSkizzle said:
You aren't in the clear yet. When I start ADB sideload, it forever says starting adb sideload feature... What now?
Click to expand...
Click to collapse
You have to put the zip in the folder you are using to run your commands
type adb sideload romname.zip
Then press enter
bigdaddy619 said:
You have to put the zip in the folder you are using to run your commands
type adb sideload romname.zip
Then press enter
Click to expand...
Click to collapse
I did that and got error: device not found. my adb version is 1.0.31, is it something wrong with drivers? again thanks for bearing with me
MacSkizzle said:
I did that and got error: device not found. my adb version is 1.0.31, is it something wrong with drivers? again thanks for bearing with me
Click to expand...
Click to collapse
Look in post one to fix the drivers
bigdaddy619 said:
Look in post one to fix the drivers
Click to expand...
Click to collapse
I already had the MyHTC drivers installed. I'm still getting "Starting ADB sideload feature..." on my phone and "error device not found" in my command.
MacSkizzle said:
I already had the MyHTC drivers installed. I'm still getting "Starting ADB sideload feature..." on my phone and "error device not found" in my command.
Click to expand...
Click to collapse
Uninstall it and start over, I know there are a few versions maybe you are using an older version coz it sounds like a driver issue
bigdaddy619 said:
Uninstall it and start over, I know there are a few versions maybe you are using an older version coz it sounds like a driver issue
Click to expand...
Click to collapse
After uninstalling the driver, i found my M7WLS and went to update the driver. I selected "Android USB Devices" the only drivers available are samsung ones.?
MacSkizzle said:
After uninstalling the driver, i found my M7WLS and went to update the driver. I selected "Android USB Devices" the only drivers available are samsung ones.?
Click to expand...
Click to collapse
Get the latest drivers from HERE the ones dated 6/6/13 and also the BMP drivers
bigdaddy619 said:
Get the latest drivers from HERE the ones dated 6/6/13 and also the BMP drivers
Click to expand...
Click to collapse
Downloaded and installed them, now there's nothing like ADB USB devices in my drivers to choose
MacSkizzle said:
Downloaded and installed them, now there's nothing like ADB USB devices in my drivers to choose
Click to expand...
Click to collapse
It should be one of the first 2 choices
Also try unistalling everything HTC and reboot your PC and re-install
bigdaddy619 said:
It should be one of the first 2 choices
Click to expand...
Click to collapse
My first two choices are 61883 device class and avc devices. did i somehow install drivers wrong?!
Did you see my edit?
bigdaddy619 said:
Did you see my edit?
Click to expand...
Click to collapse
will try
---------- Post added at 12:58 AM ---------- Previous post was at 12:41 AM ----------
MacSkizzle said:
will try
Click to expand...
Click to collapse
So I got the drivers installed but when I enter adb sideload on my phone it still just says starting. I tried sideloading a rom anyways and a whole mess of stuff shows up but doesn't reboot my phone or anything.

[Q] htc one noob problems

Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0
aratula67 said:
Hi all, Ok, I have my htc one unlocked the bootloader and have rooted it but somewhere....... Somehow i have wiped the system,I have no factory reset, I can go through the fastboot usb then into recovery with TWRP and now i'm stuck........ If i try to reboot the phone all i get is the device starting up to white htc screen then restarting again, Can i have someone point me in the right direction please.
M7_UL PUT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v31.120.274.0617
OS-2.24.841.1
eMMC-boot 2048MB
Jun 21 2013,23:03:15.0
Click to expand...
Click to collapse
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.
aratula67 said:
I'll see if i can work out No's 2 and 3.
I tried otg-usb with (bigxie_m7_GPe_KRT16S_odexed-signed.zip) and i got (no md5 visible) it says it's installing but then it says failed to load.
Click to expand...
Click to collapse
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop
nkk71 said:
is that a 4.4 GPE ROM?
4.4 ROMs require TWRP 2.6.3.3+
and 4.4 GPE ROMs usually require S-Off, otherwise they'll bootloop
Click to expand...
Click to collapse
how do i updrade to twrp 2.6.3.3 please
aratula67 said:
how do i updrade to twrp 2.6.3.3 please
Click to expand...
Click to collapse
[RECOVERY] TWRP touch recovery v2.6.3.4
Same Problem in addition to adb!
I got the same problem stuck with the start up screen but my problem is i cant see my device in adb! I tried several times but no luck! Any solutions for that?
Thanks...
Nothing, Nada, Zip............
nkk71 said:
install a ROM, using one of those methods:
1- OTG cable
2- adb push <name of rom>.zip /data/media/0/
3- adb sideload <name of rom>.zip (http://forum.xda-developers.com/showthread.php?t=2317986)
Click to expand...
Click to collapse
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??
aratula67 said:
Hey thanks for your help but i tried all three of these and all i get is failed to load....... Any further hints for me??
Click to expand...
Click to collapse
can you be a bit more specific about the error; maybe copy/paste command prompt.
nkk71 said:
can you be a bit more specific about the error; maybe copy/paste command prompt.
Click to expand...
Click to collapse
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?
aratula67 said:
Ok, after some more reading and research i've finally managed to load ViperOne 3.5.0 rom. TWRP (2.6.1.0) says it's there and there's a backup done, But in bootloader mode it says S-ON, unlocked and rooted but the htc one just keeps rebooting all the time gets to white screen (htc quietly brilliant) and that's it........ then reboots over and over, until i manually press power and volume down to go to bootloader or recovery screen......
Any ideas?
Click to expand...
Click to collapse
did you select WIPE in the installer? if not reinstall using WIPE, and in TWRP, wipe cache and dalvik. (it's in Wipe -> Advanced Wipe -> select Dalvik and Cache only, then swipe to wipe)

HTC One M7 UL 3.62.401.1 Stuck @ HTC Logo

Bootloader unlocked
m7_UL PVT SHIP S-ON RH
hboot-1.55.0000
radio-4a.21.3263.04
opendsp-v32.120.247.0909
0s: 3.62.401.1
emmc-boot 2048mb
oct 17 2013 h6 23.6.14
Problem is that phone is stuck @ HTC logo
Before that phone was rooted and twrp recovery installed.
Customer do something from recovery (that he unable to describe), then phone stuck @ HTC logo.
I am trying to install RUU.exe but not find any RUU that match with 0s: 3.62.401.1 and radio and CID : Htc__j15.
Then I am trying to s-off for flashing different firmware by supercid, but I failed to s-off because phone is stuck @HTC and don't found as adb
so rumrunner_HTC_0.5.0 tool unable to recognized it.
Now unable to downgrade hboot to 1.44 and s-off the device and find any compatible ruu.exe
I tried factory reset both from Bootloader and recovery but no luck.
Now phone is Stuck @ HTC logo . If I select Boot-loader (Hboot) Nothing found in device manger,
CWM Recovery accessible, only fastboot and oem ruu mode assessable (fastboot oem rebootRUU) and by this it is recognized by ruu.exe
what to do? any method to s-off in this situation or any suggestion?
Thanks.
mmrozibul said:
Bootloader unlocked
m7_UL PVT SHIP S-ON RH
hboot-1.55.0000
radio-4a.21.3263.04
opendsp-v32.120.247.0909
0s: 3.62.401.1
emmc-boot 2048mb
oct 17 2013 h6 23.6.14
Problem is that phone is stuck @ HTC logo
Before that phone was rooted and twrp recovery installed.
Customer do something from recovery (that he unable to describe), then phone stuck @ HTC logo.
I am trying to install RUU.exe but not find any RUU that match with 0s: 3.62.401.1 and radio and CID : Htc__j15.
Then I am trying to s-off for flashing different firmware by supercid, but I failed to s-off because phone is stuck @HTC and don't found as adb
so rumrunner_HTC_0.5.0 tool unable to recognized it.
Now unable to downgrade hboot to 1.44 and s-off the device and find any compatible ruu.exe
I tried factory reset both from Bootloader and recovery but no luck.
Now phone is Stuck @ HTC logo . If I select Boot-loader (Hboot) Nothing found in device manger,
CWM Recovery accessible, only fastboot and oem ruu mode assessable (fastboot oem rebootRUU) and by this it is recognized by ruu.exe
what to do? any method to s-off in this situation or any suggestion?
Thanks.
Click to expand...
Click to collapse
1) Flash the Guru Reset ROM in CWM . Download from this link:
http://www.htc1guru.com/2013/10/guru-reset-3-62-401-1-stock-rom/
Follow the instructions on this page to understand how to put a ROM zip on ur phone through ADB:
http://forum.xda-developers.com/showthread.php?t=2317986
Remember, u have 2 push the Guru Reset ROM zip to the phone
2) Flash the zip file in CWM
3) DONT SELECT ROOT. SELECT STOCK RECOVERY
4) Continue the procedure
5) Profit
Basically, no need for S-OFF and HBOOT 1.44
raghav kapur said:
1) Flash the Guru Reset ROM in CWM . Download from this link:
http://www.htc1guru.com/2013/10/guru-reset-3-62-401-1-stock-rom/
Follow the instructions on this page to understand how to put a ROM zip on ur phone through ADB:
http://forum.xda-developers.com/showthread.php?t=2317986
Remember, u have 2 push the Guru Reset ROM zip to the phone
2) Flash the zip file in CWM
3) DONT SELECT ROOT. SELECT STOCK RECOVERY
4) Continue the procedure
5) Profit
Basically, no need for S-OFF and HBOOT 1.44
Click to expand...
Click to collapse
I have that rom already, I will try post result..
Thanks a lot..
mmrozibul said:
I have that rom already, I will try post result..
Thanks a lot..
Click to expand...
Click to collapse
Pls hit the thanks button if u think I helped u
raghav kapur said:
Pls hit the thanks button if u think I helped u
Click to expand...
Click to collapse
Problem solved by Adb sideload method.
Phone is alive now
this si my first time writing on this forum.ive been stuck with no OS on my One,hboot 1.55,os-3.62.401.1(4.3),unlocked bootloader,with TWRP,with superuser acces.I acidentali delete my whole os and data/system/nternal... in TWRP.TWRP coudnt mount data/system/dalwik cache/internal storage-nothing.i get bootloop.then i get problem with superuser- in TWRp.Tryed to push or sideload many roms and zips,but adb coudnt recognize my device in the way it should.so,with no os and nothing on my internal storage,and getting problem with superuser in TWRP,i tried to run ruu.zip.it start but stuck cuz i was unlocked bootloader and not s-off.so i go from the bigining.I tried to sideload too,but i failed!!!this is what i done---Relock bootloader.Unlock bootloader.Flash latest CWM recovery.Thru cwm i flash cm 10.1.It boots!!then flash susuperuser.zip to gain root.with root checker i chech if i manage root.if not,use another superuser.zip...then i flash ARHD 11 to try s-off(fail).then i flash ARHD 52.0,again check my root.then i run firewater and get S-off.I see many people stuck with no os and with adb problems,or cant get s-off to retun to stock or run the device which is in bootloop.this is how i manage to un-softbrick my One,and to get S-off
Sory for my english,and sory if the thread is wrong.I just want to help if someone got stuck in bootloop/with no os/with no S-off to run ruu.zip or any rom.
( Im not responsible if you brick your device,this is just sugestion and way how i did it)

Categories

Resources