Hi I need some help from you guys my HTC Incredible S is stuck on HTC logo
S - ON RL
HBOOT 1.16.0000
Radio 3805.09.03.27_M
i tried RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
But i am getting this error
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Click to expand...
Click to collapse
USB cable is fine i attached my Sensation and it works fine. any suggestions?
Just making sure, only your incredible s is plugged in, right? Your sensation is not plugged in too?
Do you have the correct drivers and stuff installed?
markj338 said:
Just making sure, only your incredible s is plugged in, right? Your sensation is not plugged in too?
Do you have the correct drivers and stuff installed?
Click to expand...
Click to collapse
Yes Only HTC Incedible S 1 cell phone at a time.
That's the thing when i connect Incedible S i go to Device manager i cant see any Android phone there But when i connect HTC sensation i can see Android Phone in Device manager
Cateye said:
Yes Only HTC Incedible S 1 cell phone at a time.
That's the thing when i connect Incedible S i go to Device manager i cant see any Android phone there But when i connect HTC sensation i can see Android Phone in Device manager
Click to expand...
Click to collapse
Do you have the phone connected in Charge Only mode? Have you tried turning Debugging Mode on?
tpbklake said:
Do you have the phone connected in Charge Only mode? Have you tried turning Debugging Mode on?
Click to expand...
Click to collapse
I can't check if cellphone is in Debugging mode or not because when i turn on the cellphone i see HTC logo and then nothing happens. cell phone is stuck on HTC Logo
Use latest HTC drivers and don't forget to remove HTC Sync if installed. Also try another usb port and another usb cable.
I have installed latest drivers through HTC Sync then UNinstall HTC Sync software
Use 2 different Data cables. Tried different USB ports but every time i attach HTC Incredible S computer can't find any Android Device in device manager. On the other hand when i attach HTC sensation Device manager recognise the android device.
if i cant solve this problem then my guess is that every time i try to run RUU i will get Error 170 so please help me out guy ....
Cateye said:
I can't check if cellphone is in Debugging mode or not because when i turn on the cellphone i see HTC logo and then nothing happens. cell phone is stuck on HTC Logo
Click to expand...
Click to collapse
Can you still get to the HBOOT menu? If so, does the device show up if you select the FASTBOOT option on the HBOOT screen?
It should change the screen to FASTBOOT USB mode.
tpbklake said:
Can you still get to the HBOOT menu? If so, does the device show up if you select the FASTBOOT option on the HBOOT screen?
It should change the screen to FASTBOOT USB mode.
Click to expand...
Click to collapse
Now all i have to do is run RUU right?
Cateye said:
Now all i have to do is run RUU right?
Click to expand...
Click to collapse
What happns if you select FASTBOOT from that same menu? It should change to FASTBOOT USB and then check Device Manager again.
If so, yes I would go ahead and try running the RUU again.
i did select FastBoot and it changes into FastBoot USB
and then i run RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
for 40 mins i saw this message and nothing happens
Any suggestions?
Cateye said:
i did select FastBoot and it changes into FastBoot USB
and then i run RUU RUU_VIVO_SENSE30_S_HTC_WWE_3.11.405.2_Radio_20.4805.30.0822U_3822.01.08.14_M_release_252414_signed_4
for 40 mins i saw this message and nothing happens
Any suggestions?
Click to expand...
Click to collapse
Well you could put it into HBOOT USB mode and try running the RUU again and see if there is any difference.
when i go for HBOOT USB mode i get
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
Click to expand...
Click to collapse
Try doing factory reset and then install RUU.
Amar-S said:
Try doing factory reset and then install RUU.
Click to expand...
Click to collapse
tried it but nothing happens
can i use this method?
http://forum.xda-developers.com/showpost.php?p=21046189&postcount=2
Can some one please provide me ROM.zip file only ?
The method is worth a shot.. the Rom.zip file will be here when u are running the RUU.. just copy/paste it on desktop in the process
c:/your user name/appdata/local/temp and search rom.zip
Click to expand...
Click to collapse
I had something like that before when I tried to go back to stock. Basically I flashed the RUU, got rid of cwm recovery and all that, and I ended up getting stuck on the HTC logo white screen, with it refusing to boot.
I ended up going back to cwmr and a custom ROM.
So maybe the best way for you to be able to use your phone would be to go and put a custom ROM on it. However mine was S-OFF so it was easy for me to flash recovery again, I've forgotten how to go S-OFF from S-ON but you should be able to do it without booting.
However I would also know how to go back to stock.
Yea you can use PG32IMG.ZIP method.
If still not , Unlock your bootloader and install a custom rom.
I will use this method once i get back home
run the ruu again in pc.. and extract the rom.zip from temp folder in pc.. it will be in c drive-your user name-appdata-local-temp and search rom.zip.. rename it to PG32IMG.ZIP make sure its not PG32IMG.ZIP.ZIP
Click to expand...
Click to collapse
Amar-S said:
Yea you can use PG32IMG.ZIP method.
If still not , Unlock your bootloader and install a custom rom.
Click to expand...
Click to collapse
if above mentioned method doesn't work how can i Unlock bootloader and install a custom ROM My cell hone is stuck on HTC logo
Hi,
have htc one m7_ul with unlocked bootloader, first i installed a custom rom then i wanted to back to stock i tried all things twpr recovery, Guru reset, nandroid backups but phone won't turn on without usb plugged inside. without cable i can get just HTC Logo
i S-OFF my htc, i installed HBoot 1.44, then i flashed it with ruu europe 1.28, i updated over OTA to 1.29 then 4.22 erase cache but i got same problem. with usb plugged to pc phone work sometimes, i get system error but it work
- Without usb, i got htc logo or blank screen.
- when phone is working with usb cable and unplug it, phone freeze and i cant do anything just i can reboot it with vol- and power button
Best regards.
Phone Information : HTC Incredible S, S-ON, 4EXT Recovery
I was using SVHD 2.1 ROM from quit some time, since last week, phone was lagging too much and when I connect phone to PC it was not showing me storage options. Phone was charging but I did not see any increase in battery percentage. I wanted to try VIVOKAT by szezso so went for flashing the ROM. This is where the problem started.
I did wipe data, wipe cache, wipe dalvic and wipe boot. After that I flashed VIVOKAT and when I try to flash boot.img, I found that it was not showing me "fastboot usb" mode. I tired different cable with no luck. And as expected phone is stuck in boot animation.
I thought there might be driver issue, so I re-installed HTC Sync but that also did not help.
Later I did restore of backup taken using CWMR before rooting, Now, restore appears to be successful, but phone is not booting, when I try to start it, it restarts into recovery.
can you guys please help me in resolving this issue
I tried with other PC and other HTC phone combination, USB Cable is fine and other phone is detected so I believe my phone's USB is not working.
When I restarted my phone with USB connected windows indicates that device is connected/disconnected and gives USB error. If I click that message USB devices window opens and it says - Windows has stopped this device because it has reported problems. (Code 43).
What options I have now?
I reflashed SVHD 2.1 and kangaroo kernal v19 on which I was earlier and phone booted
will check USB again after full recharge and will let you guys know.
anyone knows if replacing USB port (phone hardware) will help? asking as phone is charging normally when connected to charger but not when connected to PC
Hello.
After googling around for a few hours, I've still not found a solution to my problem.
I have an HTC One M7, unlocked version bought directly from HTC. Some time ago, I wanted Lollipop on my phone, so I installed the GPE Kernel on it.
I think I used this: http://forum.xda-developers.com/htc-one/orig-development/kernel-stock-reset-kernel-m7-gpe-t2963290
That worked fine, but some things didn't work, like FM radio, or the back/home button lights.
Also, it turns out my USB port doesn't work. I'm not sure if it was because of the new kernel, or if it physically broke inside. The phone still charged though.
I wanted to revert back to Sense kernel, so I used http://forum.xda-developers.com/htc-one/development/kernel-stock-reset-kernel-m7-sense-t2957343
I installed TWRP, booted into TWRP, and installed that kernel without backing anything up, foolishly. After everything did its thing, my phone became soft-bricked.
I don't have any other kernel files, nor rom files on my virtual sd card, so I cannot get out of the soft-brick.
It's still running the GPE kernel (because I see the Google logo when the phone boots).
My USB port still doesn't work. I tried three different cables, different USB ports on my computer (including USB 2), a USB-OTG cable: none of those work. (Device manager does not detect any changes.)
Therefore, I can't adb or fastboot into anything.
My phone is unlocked and S-off, btw.
All it seems that I have is the TWRP terminal command and WiFi/cellular connection.
Is there anyone out there who can balance out my foolishness?
Thank you.
Hey guys,
recently i found myself in a sticky situaiton, my USB connection to PC stopped working. Stometimes charging doesn't work until I reboot the phone, random car mode etc...
I tried everything, from reseting my ports on PC, reinstaling drivers, wiping phone cashe, factory reset and so on. PC just says "USB device is not recognized" .
So I wonder how to make the phone varanty possible without USB connection. Maybe trough terminal emulator?. I had TWRP recovery installed and I flashed stock recovery image directly from it, but it's still tampered and I have to get rid of it before taking it to store for varanty.
Any seggestions? I'm pretty desperate, pretty sure it's usb port on the phone or motherboard.
InFam0 said:
Hey guys,
recently i found myself in a sticky situaiton, my USB connection to PC stopped working. Stometimes charging doesn't work until I reboot the phone, random car mode etc...
I tried everything, from reseting my ports on PC, reinstaling drivers, wiping phone cashe, factory reset and so on. PC just says "USB device is not recognized" .
So I wonder how to make the phone varanty possible without USB connection. Maybe trough terminal emulator?. I had TWRP recovery installed and I flashed stock recovery image directly from it, but it's still tampered and I have to get rid of it before taking it to store for varanty.
Any seggestions? I'm pretty desperate, pretty sure it's usb port on the phone or motherboard.
Click to expand...
Click to collapse
you cannot remove tempered from bootloader and it will show relocked. Its there for a reason, so HTC can see if you been tampering with the phone.
Yes it does void the #warranty.
That said, I send my phone to HTC to replace charging port and they did not charge me .. Have the phone for over 3 years and its rooted.
Tak to HTC but bear in mind Depending the country there's a 50% chance they will charge you.