Supports all AOSP / CM based KitKat ROMs (Be sure to download the correct version)
WARNING!: Only flash the kernel for your device, flashing the wrong kernel can/will lead to hard brick. Never try to install the 5110/5100 on to the 5120 and never install the 5120 on to the 5110/5100.I recommend Trickster MOD and No-frills CPU Control to customize the kernel.
Use at your own risk.
Be sure to make a full nandroid backup before flashing.I am not responsible for any damages that may occur.
Features:
Linux 3.0.71
OC & UV support for CPU and GPU
Max CPU speed is 1920MHz
Max GPU speed is 700MHz
Exfat support
DynamicFSYNC
Governors: Adaptive, Pegasusq(default), Interactive, Powersave, Performance, Ondemand, Userspace, LulzActivQ, SmartassH3, ZZmoove.
ARCH-Power enabled
ZRAM
Dynamic read-ahead
Hotplugging enable/disable
TriangleAway Support
j4fs support
Frontswap Support
Click to expand...
Click to collapse
Downloads: DracoKernel
You will see two folders "Normal ROMs" and "Alternate ROMs"
Use the normal one if you are running: CM, AOSB, Slim, or Beanstalk.
Use alternate if you are running: Carbon or Omni
Since PAC adds its own custom frameworks, it will have its own version.
If you flash the wrong one, you will be stuck on the bootanimation. Easy fix, just go flash the other one.
Installation:
Flash in recovery.
Then flash SuperSU
Goals of this kernel:
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end. With that being said, I am open to any suggestions and contributions, but I will only implement it in if it makes sense to me and does not hinder one's experience using this as a daily driver. Also, try to limit talk of benchmark scores because they do not accurately depict real life experience.
Source: https://github.com/ryukiri/DracoKernel
XDA:DevDB Information
[Kernel][N5110 / N5120 / N5100] DracoKernel, a Kernel for the Samsung Galaxy Note 8.0
Contributors
ryukiri
Kernel Special Features:
Version Information
Status: Testing
Created 2014-02-23
Last Updated 2014-05-03
Reserved
Changelog:
2.22.2014
Initial Release
Reserved
To Do:
Make sure it compiles with linaro and -O3 optimizations
BLN support
Check Boeffla sound problem
Doubletap2wake (low priority since our hardware limitations will cause it to have massive battery drain)
USB OTG
Touchwake(?)
Patch up to Linux 3.0.101
Dual boot (not sure since I don't use it much, but i may implement it in the future)
Suggestions?
Click to expand...
Click to collapse
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
people could always use mobile odin though.
mobile seem not working on the current nightly, so unable to flash
Gekritzelt von meinem Note 8
Dexxmor said:
For more responses , you should make a recovery flashable zip, for the noobs and for people with no pc
Click to expand...
Click to collapse
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
ryukiri said:
Yeah, I was planning to so flashable zips in the future. This first release is like a beta. I need to make sure all 3 variants work properly. You have the n5100 right? I heard from tejkkarani that it takes forever to boot so hold off on flashing for now. (Great if anyone else could confirm this) I'm going to take a look at it today.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
:cyclops:I have a N5100 also also waiting to try out kernel
matthewtech770 said:
:cyclops:I have a N5100 also also waiting to try out kernel
Click to expand...
Click to collapse
Can you test it?
ryukiri said:
Can you test it?
Click to expand...
Click to collapse
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
matthewtech770 said:
Cool I will i see it's a .img format how do I install this I think I know I have to replace the img in a CM11 I have downloaded and switch out the img and then reflash the CM11 rom right
Click to expand...
Click to collapse
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
ryukiri said:
I sent you a PM. Its recommended to use Heimdall, but that way might work. Try it. I'll try to get a flashable zip asap. Computer is compiling a new ROM right now so I'll see after that.
EDIT: The flashable zip should be available soon. I'm testing it on my n5110. Check your PM in a few mins.
EDIT2: Sent you a PM, can you test it now?
Click to expand...
Click to collapse
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
matthewtech770 said:
I flash the n5100 zip you sent me tab is still booting just the cm11 circle spinning around :crying:
Click to expand...
Click to collapse
I apologize for the inconvenience. Just realized that this kernel does not work on anything but PAC. Therefore, I will spend a lot more time testing before releasing again. Thread will be closed until further notice.
Thread re-opened. Figured out the problem faster than I initially expected. Downloads are up for the N5110. I have personally tested them on the ROMs we have. There are two different versions for now so please download the correct one. Enjoy!
FYI: N5100 builds will start shortly (approximately 12-24 hours from now or so), and N5120 will start a day or two after that.
Edit: N5100 should be ready now.
Using on CM 11 (cm-11-20140226-NIGHTLY-n5100.zip) .. not bootloop for me. Works perfectly. As I have installed it just now cant comment on the performance or battery life. Using GravityBox (KK) with Xposed Framework. Didnt face any issues yet.
working with AOSB 1.3.0 on N5100 from 23rd February 2014 , no problem so far.
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Kernel works good at my end (newest nightly). Good job
Gesendet von meinem Nexus 4 mit Tapatalk
rowihel2012 said:
Boeffla sound app not support please fix
Is your kernel name is dirty Austin?
---------- Post added 27th February 2014 at 12:08 AM ---------- Previous post was 26th February 2014 at 11:59 PM ----------
Boefllia sound restarting the tablet not working art all
Click to expand...
Click to collapse
whoops, just checked the code. I forgot to enable it in the defconfigs (files and everything are all in place though). I'll enable it next release. And no its not, I'm going to change the name to DracoKernel in future releases. Currently, thats not too high on my priority list.
Edit: Boeffla sound may take a while. Enabled it but app isn't recognizing that the kernel has the feature..
EDIT! nevermind, i'm an idiot, lol. thanks for this kernel by the way! definitely kicks major ass!
Related
Ultralite and superfast stock rom based on UBAMC2 firmware is here..
K2wl.I9082lubamc2.v1.1a
http://d-h.st/KN3
Features
Based on new I9082LUBAMC2 Firmware
Deodexed
Zipaligned
Rooted
SuperSU (Thanks to Chainfire )
BusyBox
Init.d Support
ext2sd Inbuilt support via addon. (no need for changing settings to make it work)
Xperia keyboard (stock keyboard removed)
UC Browser
No post install setup wizard.
Inbuilt AD blocking in Apps.
Custom Kernel.
Some inbuilt tweaks for battery improvement.
Custom Kernel features (build from source with added features) –
a. Compiled with google toolchain 4.7
b. Compiled with latest kernel building optimizations O3, Ofast.
c. Specific kernel flags Optimised specially for our beloved i9082/i9082l
d. Fast usb charging support. Now you can get fast charging by connecting usb like AC adapter.
e. Customized CPU governers like hotplug, pegasusq (original Samsung governer for multicore support), interactivex, gallimaufry, ondemandx,sakuractive,lulzactive, smartassV2, adaptiveX,lagfree, etc in all around 15 governers to choose from for different needs.
f. I/O schedulers added SIO,fifo,row,V(R).
g. Disabled samsung MMC_CAP_ERASE -> no more hardbrick bug
Due to lack of time i am not able to put
four way boot menu,multiwindow all app,aroma selection etc in this release but will be added in upcoming releases.
Click to expand...
Click to collapse
Prerequisites
1.CWM by me or chotu or or pawitp
recovery 6.0.3.1 http://d-h.st/nw6 (full touch with internal and external sd support by me!!!)
2. some patience
Procedure to install
1. download from http://d-h.st/KN3
2. put it in sd card
3. go to cwm, make a nandroid back up
4.factory reset, wipe cache ,wipe davlik cacahe
5.install the rom
6. Enjoy!!!
I will provide flashable zips to deleted apps. just request them here...
I AM NOT RESPONSIBLE FOR ANY BRICKS.
Credits
Dsixda for android kitchen
All others who support me in the process...
mine
mine too
just in case
k2wl said:
mine
Click to expand...
Click to collapse
thanks, im downloading now, i give the feedback as soon as possible
Enviado de meu GT-I9082L usando o Tapatalk 2
Thank you we will test now!
Is this kernel unsecured ? I mean, will we have writable /system partition?
XDA Tapatalk on Android Device
at now everything perfect, doesnt saw any bug.
i only miss a widget, its the "active aplications", i found this picture of him:
in this picture the widget is in "tiny mode", only show the number and if o touch it gets to the task manager, the other mode show's all aplications in little tumbs and have an X to close directly an aplication or all together.
@x1123yes sytem is writable..
@mucego will provide u flashable zip for same...
right now i m busy writing a tutorial how to make ur own custom rom for grand
Thanks a lot! I've been searcing for something like this.
I'll flash and test so I can give feedback about your ROM
k2wl said:
@x1123yes sytem is writable..
@mucego will provide u flashable zip for same...
right now i m busy writing a tutorial how to make ur own custom rom for grand
Click to expand...
Click to collapse
very good rom'm doing some adjustments ned to run better
k2wl said:
@x1123yes sytem is writable..
@mucego will provide u flashable zip for same...
right now i m busy writing a tutorial how to make ur own custom rom for grand
Click to expand...
Click to collapse
:good:
by far i can say, its perfect, everything working fine and more faster than the retail rom, good job!
K2wl my phone is not going into deep sleep. Tru the night its stays at 312mhz. Wifi on.
Sent from my GT-I9082L using Tapatalk 2
hayabusa08 said:
K2wl my phone is not going into deep sleep. Tru the night its stays at 312mhz. Wifi on.
Sent from my GT-I9082L using Tapatalk 2
Click to expand...
Click to collapse
why u keep wifi on all night? that is keeping your phone from going to deep sleep.
K2wl like i said i have no issues with other androids phones with same wifi. The problem is kworker is preventing sleep. When i revert to stock kernel there is no issue. And i notice it only happens when i set it to min 312mhz frequency.
Sent from my GT-I9082L using Tapatalk 2
dammm fast!
great job!
---------- Post added at 12:19 PM ---------- Previous post was at 11:54 AM ----------
@k2wl
is there any way to donate something to you?
this is a great job!
Very good
Very nice rom!
So far very stable and very fast.
Keep up the good work!! o/
Maybe you could add 5 icon lockscreen shortcuts (instead of only 3)
downloading and need to try but with reviews and great feedbacks, no star yet???
gfcpinto said:
Very nice rom!
So far very stable and very fast.
Keep up the good work!! o/
Maybe you could add 5 icon lockscreen shortcuts (instead of only 3)
Click to expand...
Click to collapse
This would be great
+1
Great work so far bro but the only thing tat bugs me is the fast battery drain and the 3 hr time window required to fully charge my phone from the scratch.This never happened with stock kernel...
Sent from my GT-I9082
Roms built using the ArchiDroid Optimisations
Disclaimer:- I am not responsible for anything that you do to your device by flashing my zips, i provide them as-is, anything you do is your risk and i take no responsibility, by downloading the zips you agree to this statement.
For those who do not know what the optimisations are it is just a commit that intends to increase the performance of a ROM by using different optimisations at code level, more information on that can be found Here It boasts a supposed increase in performance by up to 6x.
Click to expand...
Click to collapse
I'll be building updates when i have the time too (make a request if you want a certain ROM added) The builds will be much larger then the normal versions as they are odex'd etc. I am using the Unofficial P880-Dev sources only unless specified otherwise and using 4.8-sm to build the Rom, and 4.7-sm to build the kernel.
Click to expand...
Click to collapse
Downloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/Liquid%20Smooth%20-%20AD/[/url]
PacMan
Code:
[url]https://s.basketbuild.com/devs/Absol/PacMan%20Rom%20-%20AD/[/url]
Paranoid Android (AOSPA-Legacy)
Code:
[url]https://s.basketbuild.com/devs/Absol/Paranoid%20Android%20-%20AD/[/url]
Omni-Rom
Code:
[url]https://s.basketbuild.com/devs/Absol/Omni%20Rom%20-%20AD/[/url]
CyanogenMod 11.0
Code:
[url]https://s.basketbuild.com/devs/Absol/CyanogenMod%2011.0%20-%20AD/[/url]
Official Sources - Pending
CarbonRom
Code:
[url]https://s.basketbuild.com/devs/Absol/Carbon%20Rom%20-%20AD/[/url]
NamelessRom
Code:
Pending
Team Win Recovery 2.7.1.0 MultiRom & Normal
Code:
[url]https://s.basketbuild.com/devs/Absol/Team%20Win%20Recovery%20Project/[/url]
http://forum.xda-developers.com/showthread.php?t=2754997 - OT of Commit
https://github.com/P880-dev/android_kernel_lge_x3 - Kernel Source
https://github.com/P880-dev/ - All Sources
Click to expand...
Click to collapse
Hid3away said:
Roms built using the ArchiDroid OptimisationsDownloads (Can make mirrors available on request)
LiquidSmooth
Code:
[url]https://s.basketbuild.com/devs/Absol/LiquidSmooth-AD/[/url]
Click to expand...
Click to collapse
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
ze7zez said:
Is the ROM of this post is no longer valid?
I downloaded yesterday. However, there is now a file to download.
Click to expand...
Click to collapse
That's still fine, it's just the next one is more up-to-date and odex'd.
The build from yesterday was not odex'd.
Sorry for the inconvenience..
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
dimi89 said:
Sooo just read arch's post about this improovements and i am interested in testing this builds (liquid is my personal pick),however i am also interested in how did u build it since on his thread i read that there is 2 versions O2 and O3 so witch one did u use.Is there any stability issues or any other rom problems when u build it this way ?
BTW thank you for your effort to bring us this
Click to expand...
Click to collapse
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
root apps could not get root permission on your cm11 rom
~MaX~ said:
root apps could not get root permission on your cm11 rom
Click to expand...
Click to collapse
Have you tried flashing a SU zip? Setting root perms to Apps and ADB? Setting auto response to Allow?installing SuperSU from playstore and using that to install/manage root? Google'd the problem to see if other devices had that issue? Did you try clean flashing? Did you try a custom kernel?
no?
Anyways, Omni is built Gonna build TWRP 2.7.1 whilst i have it synced anyways.. Don't know if Adam has or not already, links in OP for OmniRom.
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
:good: Downloading OMNI
KrisJoe said:
Could you please try to build an AD cm11 official version?
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
PA (AOSPA-LEGACY) is sync'd and building now thou
Normal AOSPA, like pure PA builds, but it has camera and Audio Issues /: Not sure which adds and removes i need, i followed the tutorial but it's outdated i think?
Hid3away said:
I used O3 optimisations
EDIT: CM-11 build is up with the ArchiDroid Optimisations, -O3 and 4.8-sm Rom and 4.7-sm Kernel
Click to expand...
Click to collapse
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
devilozzo said:
From JustArchi
"... O3 enables all O2 optimizations and some extra optimizations that like to increase code size and may, or may not, increase performance. ..."
So... increase performance or not? Did you test if it actually improve performance?
Click to expand...
Click to collapse
The thread has [TESTING] in the title for a reason
In all honesty, i can't tell if it does make a difference, but it's all down to the feel of the ROM...
O3 makes file bigger with chance of increased performance
O2 makes file smaller with chance or worse performance.
O3 is clear choice.
It's testing phase, you tell me if it's faster or slower
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
Try using this app. Very usefull in your case.
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Sent from my LG-P880 using XDA Premium 4 mobile app
---------- Post added at 05:10 PM ---------- Previous post was at 05:01 PM ----------
Twrp 2.7.1.0 works.
Sent from my LG-P880 using XDA Premium 4 mobile app
Kanad said:
Dear Hideaway,
Can you post a flashable zip of TWRP? This will be helpful to some of us like me who don't have immediate access to PC.
Regards,
Kanad
Sent from my LG-P880 using XDA Free mobile app
Click to expand...
Click to collapse
No i can't be bothered haha
there is a great free Root app called Flashify hat allows flashing .img files on the device, search it up on the playstore, works with boot and recovery images, and it's working perfect on our p880
Here's the link if your still too lazy to search it up on play
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Can you add Carbon ROM, please ?
SpyKnife said:
Can you add Carbon ROM, please ?
Click to expand...
Click to collapse
Of Course i can mate, it's in the queue now, once PA's finished, it's gonna be Pac-Man, and then it's CyanogenMod Official, and then it will be Carbon for you mate
for those who want to install recovery without pc you can always use terminal emulator:
rename your image to TWRP_2.7.1.0.img and have it placed in Download folder
su
cat /sdcard/Download/TWRP_2.7.1.0.img >/dev/block/mmcblk0p1
sync
EDIT: Forgot the one in the end.
Should be fine now, sorry.
Sent from my LG-P880 using XDA Premium 4 mobile app
Hid3away said:
Yeah sure thing guys, let me finish with initial PA and PAC, and then i will be able to build it! In the meantime, I built TWRP 2.7.1.0 both normal and MultiRom versions, but i'm not too sure if @Adam77Root is okay with me releasing those as he has the main thread kind of thing? I'll add to OP thou anyways but if you want me to remove i will ASAP!!
Click to expand...
Click to collapse
Sure, I'm perfectly fine with it. Keep up the good work!
Adam77Root said:
Sure, I'm perfectly fine with it. Keep up the good work!
Click to expand...
Click to collapse
Thankyou!
Also, PA is now built and uploaded! 400MB/s upload
Gigabit connection or something like that, it's so quick :3
Download link is in OP
If anyones interested, i'm using this company until i find a free alternative: https://www.digitalocean.com/?refcode=1a1e82c1521c
Very good service
My kernel for moto g. I dont like bloated OP's so i will make this short
Features:
intelli-plug
linaro 4.9 built
frandom
15+ governors
lots of io schedulers
LMK tweeks
kexec multi rom patch
LZ4 compression
disabled some debugging to reclaim more ram
more i forgot but is all on my git here: https://github.com/cannondalev2000/kernel_motorola_msm8226/commits/kk44?page
downloads will be here: http://www.drdevs.com/devs/cannondalev2000/InSaNiTy/
there may be some times where i upload and dont post on here in that case look at my git for changelog and additions
also dont ***** to me if this bricks your phone because its not possible and i can not be held responsible if you brick flashing this in any way
that is all. flash and enjoy
mine
At least a kernel without dt2w. That's my kernel!
Cool one more kernel for my moto g..will check and revert..
I've lost wifi connection. Any problem with wifi modules? I'm on Mahdi rom
Finally a kernel that works on the latest Carbon Nightly (CARBON-KK-NIGHTLY-20140828-0903-falcon). WIFI and camera working, Trickster mod settings sticks!!
Thank you!! @cannondaleV2000
Awesome!
Thank you for the kernel!
Working fine on PA 4.6 Beta1
1- Awesome kernel, thank you so much for your work and the camera feels better than before...
2- Bugs:
Simple ondemand doesn't work, the phone reboots.
3- Request:
Can you add (if is possible) underclock to 192MHZ?
Thanx for this amazing kernel @cannondaleV2000 but the download link isn't opening...Plz solve this issue....Dying to try it
Can someone upload the build and post it here,or pm it to me.
Provided link doesn't work.
Absolutely fantastic kernel! Pretty barebones but very smooth performances.
---------- Post added at 09:02 PM ---------- Previous post was at 08:58 PM ----------
Akshay7273 said:
Thanx for this amazing kernel @cannondaleV2000 but the download link isn't opening...Plz solve this issue....Dying to try it
Click to expand...
Click to collapse
CrysiZ said:
Can someone upload the build and post it here,or pm it to me.
Provided link doesn't work.
Click to expand...
Click to collapse
http://d-h.st/1ww
justanicename said:
Finally a kernel that works on the latest Carbon Nightly (CARBON-KK-NIGHTLY-20140828-0903-falcon). WIFI and camera working, Trickster mod settings sticks!!
Thank you!! @cannondaleV2000
Click to expand...
Click to collapse
No WIFI for me.
I got a perfect kernel for my g
Sent from my Moto G using XDA Premium 4 mobile app
There will be a stock version of the kernel?
Thank you very much
Finally I'm able to taste multirom feature because of inSaNiTy kernel (none of the kernels were compatible)
Device : 1033xt GPE converted version
I will to test it. Thanks
why this file is so big?
I found one .ko file almost 32 mb in zip file..
why this file is so big?
sorry guys the download link was down for a bit as the server i use was down for a while. all is good now
Deleted
Deleted..
the .ko file is so big because being built with linaro 4.9 increases the size of the code output. and dont link to other kernels in my kernel thread -_-
Code:
***WARNING***
-READ CAREFULLY!!
YOU FLASH THIS KERNEL AT YOUR OWN RISK.I TAKE NO RESPONSIBILITY FOR ANY DAMAGE THAT MAY OCCUR DUE TO THE FLASHING OF THIS IMAGE.
I WILL NOT BE RESPONSIBLE FOR LOST DATA,BRICKED PHONE,OR ANYTHING OF THE SUCH.(PHONE EXPOLDES,OVERHEATS ETC)
THIS KERNEL IS ONLY FOR THE S5 MINI SM-G8OOF (Exynos) DO NOT FLASH THIS ON ANY OTHER DEVICE!
EOL (End of Life)
I will be creating a new thread for my N kernel - Stay tuned!
UPDATED Linux kernel to 3.4.113 on 27-10-2016UPDATED to v2.5 on 13-10-2016
Code:
Changes in version 2.5
*Unlocked CPU frequencies 1500,300 and 200MHZ
*Switched to self built Linaro/Sabermod toolchain
*Added many more optimization flags
*Added DriveDroid support
Features
-Now supports Many different ROMS for the G800F
-Compiled with self built optimized Linaro/SaberMod toolchain ("LinaroMod")
-Unlocked CPU frequencies: 1500MHZ,200MHZ and 300MHZ
-Updated Linux kernel from 3.4.39 to the latest 3.4.113
-Added many optimizations (You can see all of the optimization flags in the makefile on the kernel source page)
-enabled graphite
-Added Drivedroid Support - http://softwarebakery.com/projects/drivedroid
-Fading LED's
-Added I/O schedulers
-zen
-sio
-fifo
-fiops
-tripndroid
-vr
-Added CPU governors
-zzmoove
-hyper
-alucard
-darkness
-nightmare
-wheatley
-smartassv2
-dancedance
-pegasusq
Click to expand...
Click to collapse
You will need Kernel Adiutor (free from the play store) or similar app capable of allowing you to switch I/O schedulers and
CPU governors in order to be able to change and set those.
I can recommend this.
http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
Click to expand...
Click to collapse
Known Issues
Let me know and I will try to fix them
Click to expand...
Click to collapse
Installation
I HIGHLY recommend that you do a full backup before flashing this kernel.I am not responsible if you lose any or all of your data.BACKUP!!
1.Download the "Spookcity_Kernel-MM"
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
4.Select install
5.Flash the downloaded kernel
6.Go back a few times in TWRP.Select wipe -> Advanced wipe and wipe Dalvic/Art cache and the cache partition
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
7.Reboot and hopefully enjoy.
Click to expand...
Click to collapse
Downloads
Spookcity_Kernel-MM
Click to expand...
Click to collapse
Sources
Toolchain - https://github.com/Spookcity/Android-Toolchains
Kernel - https://github.com/Spookcity/android_kernel_samsung_kminilte
Click to expand...
Click to collapse
Code:
CHANGELOG
[U]18-06-2017[/U]
-Switched to anykernel2
[U]31-10-2016[/U]
-Added zip for Bliss Rom
[U]13-10-2016[/U]
-Unlocked CPU freq 1500,200,300MHZ
-Switched to my self built toolchain
-Added many more optimization flags to the build
-Added DriveDroid support
-Added zip for Zephyr-OS
[U]24-07-2016[/U]
- Added zips to support more custom ROMS
[U]V2 - 23-07-2016[/U]
-Fixed RAMDISK to make it compatible and actually work with newer builds of CM13
-Changed SELinux from disabled to permissive to be in line with the "stock" CM kernel
-Added I/O schedulers
-fiops
-tripndroid
-vr
-Added CPU governors
-pegasusq
[U]V1 - Initial Release[/U]
Thanks to
-hennymcc and CTXz for bringing CM13 to our device! I used their kernel sources to build this.Without them I never would have been able to attemp this.
-DJ_Steve for his custom kernel.Without being able to look at his sources and cherry-pick some things I would also not have been able to do this.
-CurtisMJ Ditto same thing here.His kernel build and sources were very helpful to me.
-frap129 for his amazing toolchains!
-ArchiDroid
Anyone I may have left out sorry.I appreciate you all!
Click to expand...
Click to collapse
I hope you enjoy and please say thanks if you find this at all useful
XDA:DevDB Information
Spookcity_Kernel, Kernel for the Samsung Galaxy S5 Mini
Contributors
spookcity138
Kernel Special Features:
Version Information
Status: Beta
Created 2016-05-26
Last Updated 2017-06-18
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
Thanks for trying out the kernel. That's weird about the WiFi. I have never had that happen in the bunch of times I have flashed it. I will def look into it.I'll have a look at the log, although at this point I'm also not that great at interpreting those, so it may not help. I'll see what I can do though
Sent from my SM-G800F using Tapatalk
can you tell me someone what is kernel?
br3acker said:
can you tell me someone what is kernel?
Click to expand...
Click to collapse
http://www.makeuseof.com/tag/linux-kernel-explanation-laymans-terms/
zaworka said:
Nice, finally some new development for our phone =)
I will test the kernel right away...
One thing that I would really love would be if you have the time to look into adding DT2W :angel:
Thanks for your work so far :good:
*edit*
booting went well. However WiFi doesnt work for me :/ I uploaded the logcat-output filtered for "wifi" to hastebin. If you need anything else for debugging let me know. Thanks to dual boot I will keep your custom kernel on one ROM
log
Click to expand...
Click to collapse
OK,well after looking at the log and trying to decipher it and then thinking a bit I have only come up with one possibility.Maybe somehow your wpa_supplicant.conf file located in /data/misc/wifi/wpa_supplicant.conf has the wrong permissions for some reason.If you want you could try to check and possibly change the permissions.If you decide to try this I would backup the file because you never know.
The permissions should be: Owner - wifi Group - wifi...
Owner read and write/Group read and write/ others none.
If your permissions are correct on that file the only other thing I could possibly think of to do if you wanted would be to delete that file,wpa_supplicant.conf.Only after you back it up it though because you will lose all of your passwords,and reboot.It should recreate it.Do that at your own risk though.This is all I have come up with because I have never had that problem,so it's a bit difficult.
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
zaworka said:
I am sorry, I think the error was my fault and not a bug of the kernel. I think the build that I am running at the moment is one I build myself and used sabermod toolchain. I remembered that I had the same problem using DMPKernel on that build. I thought I was using one of hennymmc's builds by now - so, sorry for reporting but thanks for looking into anyways.
Unfortunately I tried both and didnt solve the issue ,the permissions were set correctly btw.
I just installed the CM13 on another partition but - unless I have a flashable zip file - I can not install your kernel on that one. Would it be possible to provide the kernel as .zip?
Click to expand...
Click to collapse
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
spookcity138 said:
Sure thing.I updated the download section above and added a flashable zip.I think it'll work.
Click to expand...
Click to collapse
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
zaworka said:
Nice, that worked! Thanks for the effort :good:
Will test it over the next few days :fingers-crossed:
Click to expand...
Click to collapse
Good,I'm glad that worked.You thoughts and feedback are most welcomed.
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
sasukesama said:
Any chance this kernel hits the G800H for cm 13 too ?
I can be your tester
Click to expand...
Click to collapse
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Hey, I appreciate the offer. That is something I can look into at some point. No promises. In still trying to learn all of this stuff.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Sounds good
I think you can do the same (using the cm13 kernel and DJ_Steve kernel stuff) as he has a G800H version of his kernel
I use your kernel , you can repair the wifi ?
Abde77 said:
I use your kernel , you can repair the wifi ?
Click to expand...
Click to collapse
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
What's the problem with the WiFi exactly? I need to update this anyway. I will at some point.I've had no WiFi probs though.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Oleggluk said:
Conducted any work on the development of the kernel? About sound problems and headphones like DJ_Steve , initially had no problems, and then there., maybe it depends on kernel version? Is there a chance to make all the improvements in version 3.4.39 ? (Google translation)
Click to expand...
Click to collapse
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I actually haven't touched this recently at all.I've been spending too much time on the mess that is my AOSP build [emoji2]
I give up on that for now though.It's giving me a headache.
I will try to get back to this soon,as I don't even think it works with any of my builds.I don't know.I'm not even using this right now.
I never actually had any real audio issues with this however and I did use if for awhile,so that's strange.
Click to expand...
Click to collapse
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Oleggluk said:
Also does not have wi-fi access in the new Assembly СМ13 from ayke with this kernel. I took apart your kernel and replace the ramdisk from the new build, wifi now works. (Google translation)
Click to expand...
Click to collapse
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
spookcity138 said:
I kinda remember this issue as well.Good to know about the ramdisk.
Its such a strange thing how only some experience the robotic voice...and you have no microphone problems with ayke's build either? Like it stops working after a phone call?
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Robot voice I have never had. And mute has the same problem that error camera. If you kill the mediaserver, the microphone performance is restored. You can use the long-known app Mediaserver Killer. (Google translation)
I don't like large threads. My old espresso needs an up, so where we go.
It's based on latest omap4 common by unlegancy-android with these changes:
Compiled with custom Linaro GCC by @Christopher83.
CPU underclocked to 200MHz and overclocked up to 1400MHz.
GPU overclocked up to 512MHz. (384 default)
Custom voltages based on user experience.
Touch boost from franco kernel. (default boost set to 1200MHz)
Mini-FAQ:
Q: It works on all ROMs? Nougat?
R: It should work on any recent ROM who use omap4 common by unlegancy-android.
Q: All variants?
R: Due compatibility issues it could be not work on some devices/combinations, test it.
If won't work, please provide the variant, ROM, TWRP and last_kmsg if possible.
Click to expand...
Click to collapse
Q: Is safe 1400MHz on espresso?
R: Yes, passed my stability tests without problems.
Q: Works with ramdisk mods? (Magisk)
R: Yes, by AnyKernel2.
Code:
Change CPU max clock:
# echo 'x' > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
x = 1080000, 1200000, 1300000, 1400000
Change GPU max clock:
# echo 'x' > /sys/devices/platform/omap/pvrsrvkm.0/sgxfreq/frequency_limit
x = 153600000, 384000000, 512000000
Make boot and system backup before installation, download.
XDA:DevDB Information
s1mple espresso, Kernel for the Samsung Galaxy Tab 2
Contributors
dcastro172, Android-Andi, Ziyan, Sam Nakamura
Source Code: https://github.com/dcastro172/android_kernel_ti_omap4
Kernel Special Features:
Version Information
Status: Testing
Created 2018-04-23
Last Updated 2018-05-05
NICE.....Test It Soon
Didn't work for me
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2
Skarni said:
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2
Click to expand...
Click to collapse
I checked these ROMs and they use omap4 common, should have worked, maybe a ramdisk issue, to be fair I just tested it with recent OmniROM MM and it's working fine, I will try these.
THANK YOUUU FINALLY A NEW KERNEL HERE...does it work on nougat Roms?
Skarni said:
Tried to install it over AICP and just boot looped.
Then I installed ResurectionRemix and installed the kernel and had the same results.
Used TWRP 3.2.0.0
Thanks for trying to give us something new for our old Tab2
Click to expand...
Click to collapse
I tested today with ResurectionRemix by @smart-t78 and works well, the first boot without s1mple taken so much time, then I switch off and powered on, it booted.
Enrico03 said:
THANK YOUUU FINALLY A NEW KERNEL HERE...does it work on nougat Roms?
Click to expand...
Click to collapse
Yeah, tested with latest Lineage 14.1, however, I found an issue about frequency scaling, it boots with max frequency of 300MHz :laugh:
But you can change it using adb/terminal later.
New build up :fingers-crossed:
Now it's compiled with custom Linaro GCC by @Christopher83
Added touch boost from franco kernel :highfive: (interactive governor only, configurable)
Removed 200MHz in attempt to fix frequency scaling issues
OP updated.
Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.
Skarni said:
Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.
Click to expand...
Click to collapse
Doesn't magisk hide solve the Netflix problem? It should actually...
(sorry for the OT)
-------------------------------
Thanks @dcastro172 a new custom kernel sounds like fun, would be very cool to have something more or less stable with this significant OC added, I'll need to check this out when I'm near to my p5110 soon.. :good:
Sent from my Nexus 7 using XDA Labs
Skarni said:
Installed latest OmniRom 6 booted and then installed S1mple kernel. Left it to boot for 1 hour and it never booted. turned off and tried again, not luck.
re-installed my AICP backup.
Might try it with Slim6 when I have some time, but would prefer an unrooted rom since I use netflix.
Click to expand...
Click to collapse
Did you try with Andi's builds or from official Omni website? espresso3g or wifi? It will only work with recent Andi's builds, I'm running it and works well.
Doesn't boot on latest lineageOS and needs restoring boot & system to get back a working device, here's a demsg.log....
https://drive.google.com/file/d/1cJFmLO-e4lKODHTDYCRNDJ7RfGZK50G0/view?usp=drivesdk
dcastro172 said:
Did you try with Andi's builds or from official Omni website? espresso3g or wifi? It will only work with recent Andi's builds, I'm running it and works well.
Click to expand...
Click to collapse
Yep! Used Andi's unofficlal: omni_espressowifi-6.0.1-20180414-2301.zip
---------- Post added at 01:50 PM ---------- Previous post was at 01:45 PM ----------
Sam Nakamura said:
Doesn't magisk hide solve the Netflix problem? It should actually...
(sorry for the OT)
Click to expand...
Click to collapse
"OT response to close": Only been able to get netflix to work by sideloading on ROM that is unrooted no gapps .
Magisk 16 has been problematic for me. 14 was okay. I would use magisk 14 to root to enable OC on s1mple kernel.
Sam Nakamura said:
Doesn't boot on latest lineageOS and needs restoring boot & system to get back a working device, here's a demsg.log....
https://drive.google.com/file/d/1cJFmLO-e4lKODHTDYCRNDJ7RfGZK50G0/view?usp=drivesdk
Click to expand...
Click to collapse
Skarni said:
Yep! Used Andi's unofficlal: omni_espressowifi-6.0.1-20180414-2301.zip
Click to expand...
Click to collapse
There's something very important which I'm missing, probably a very stupid issue since it works on my P5110, I read the dmesg and didn't see much useful logs, tomorrow I will investigate more. Thanks guys.
dcastro172 said:
There's something very important which I'm missing, probably a very stupid issue since it works on my P5110, I read the dmesg and didn't see much useful logs, tomorrow I will investigate more. Thanks guys.
Click to expand...
Click to collapse
FYI, I have a P3113,
The newer (maybe 2018) are default libion and it is said not to flash any custom kernels as they are not compatible.... So is this the reason some people have some trouble?
Excellent! Finally a overclockable kernel for our devices! Thank you very much Mr. dcastro172! Will test and report here ASAP!
drunkbum said:
The newer (maybe 2018) are default libion and it is said not to flash any custom kernels as they are not compatible.... So is this the reason some people have some trouble?
Click to expand...
Click to collapse
Well, recent ROMs with updated repos from unlegancy/lineageos builds with standard libion by default, my fork will only work with standard libion, some outdated ROMs use TI's libion and will not work, I think it's not the issue since @Skarni tried with latest OmniROM from @Android-Andi (which use standard libion) and won't worked for his P3113 while my P5110 woks perfectly.
And the dmesg from @Sam Nakamura is not much useful why it's from his reboot after the bootloop, I thought it has a SELinux issue but it's not, however I looked at second line and it looks like an old official build:
Code:
<5>[ 0.000000] Linux version 3.0.101-gbb24628 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sat Dec 9 09:46:13 UTC 2017
I'm trying figure it by looking at unlegancy/lineageos commits if I'm missing something but no luck yet.
galoneta said:
Excellent! Finally a overclockable kernel for our devices! Thank you very much Mr. dcastro172! Will test and report here ASAP!
Click to expand...
Click to collapse
Make sure do a backup why people are running in boot issues, if you run in boot issue please take a "cat /proc/last_kmsg > /sdcard/kmsg.txt" in TWRP terminal.
dcastro172 said:
And the dmesg from @Sam Nakamura is not much useful why it's from his reboot after the bootloop, I thought it has a SELinux issue but it's not, however I looked at second line and it looks like an old official build:
Click to expand...
Click to collapse
Not sure why the log referenced this old build, as said before I'm actually on the latest official lineageOS build from 11th February 2018 as seen on the screenshot.
I gladly provide more logs if you tell me exactly what could be of use for you...
Edit: the referenced kernel version is the one included in TWRP, check the build dates from official twrp.me and the log reference....
https://dl.twrp.me/espressowifi/
Sent from my OnePlus 3T using XDA Labs
Sam Nakamura said:
Not sure why the log referenced this old build, as said before I'm actually on the latest official lineageOS build from 11th February 2018 as seen on the screenshot.
I gladly provide more logs if you tell me exactly what could be of use for you...
Edit: the referenced kernel version is the one included in TWRP, check the build dates from official twrp.me and the log reference....
https://dl.twrp.me/espressowifi/
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
Oh, this should explain, but you was using a different kernel when you flashed it?