Database Develop

[Q] problems with proximity sensor and lighting

hello friends
I have a problem with my Atrix HD , I've released the bootloader to install a cooked rom because mine came with version 4.1.1 JB at & t, but I started to be erratic because the screen is turned off and did not return to turn , try to fix it by factory reset but did not succeed , so change the rom due to atrix_hd_utility tool which made ​​me downgrade to the version ( ICS 4.0.4 ) 7.7.1Q - 144_MB886_MR1 - 22_SIGNED_CFC.xml the which it has worked great. except for the proximity sensor
but as one simpre want more I tried to install the ROM Manager several rom versions as:
-CM 10.2 (4.3 JB )
- Holoblur (JB 4.1.2)
- Pacman (4.3 JB )
-CMB (4.3 JB )
but always I have left in a loop in the bootanimation , and had to install ics with atrix_hd_utility nuevamete , try and install rsd lite version 4.1.2 MB886_niimx -user - 9.8.2Q - 50_MB886_NII_TA - 2-16 -release- keys- NII - MX.xml
but when I try to flash tells me failed.
also try the myth tool tools but also stays in a loop in the bootanimation , not to do , I ask who has knowledge collaboration that I can do, I appreciate your cooperation .

Proximity sensor issue
Hi, I am new in this forum, and I have an AT&T Atrix HD with the same problem. Does the Proximity Sensor fail after we unlock the bootloader??? I would appreciate any information about it. I flashed the cellphone with the firmwares 4.0.4 and 4.1.1, and I even tried the fix posted here http://forum.xda-developers.com/showthread.php?t=2424379&highlight=proximity, but it did not fix it. Everything works great, except for it. Everytime that I try to make a call, I have to use the Power button to turn the screen on and off when I place the cellphone near to my ear.

The proximity sensor doesn't work on a lot of roms without flashing skeevydudes fix.
Sent from my PACMAN MATRIX HD MAXX

Proximity was fixed a couple months ago on CM10.2 and is working from the start in CM11.
You should just go for CM11. If you're having bootloops and **** like that just download the latest nightly zip file http://www.cmxlog.com/11/mb886/, backup your stuff, go to recovery mode, make a nandroid backup, erase system, cache, dalvik, data partitions and flash the zip file.

CM11 Infinite Boot Loop

Hi,
I have an infinite boot loop when i try to get CM11 on my Z1.
You have to know that :
- I unlock my bootloader with adb and it's work : my bootloader is unlock
- I try ALL nightly honami rom on cyanogen website
- When i turn on CWM I clean reset all cache (wipe, dalvik and wipe data)
- I install the gaps too for 4.4
So after that i try an unofficial CM 10.2 stable version with gaps for 4.3
And get infinite boot again and again... !
I don't see where is the problem ? I wait 20 minutes for each times and roms are put the SD card.
I use adb for unlock my bootloader and i boot the good boot.img for each rom in the shell before the install.
Help please ! Why it's not work ?
Thanks

:up:

Did you ask this to the OP of the Rom which you installed, maybe he know the solution.

I had this issue once on my galaxy s2.
By that time, I used a custom kernel that wasnt optimized for CM. Could it be that you are using a custom, non-CM-supporting kernel?
Also try a factory reset before you install CM

I get this with just about every rom apart from CM11. I'm currently struggling with romaur
Hope you manage to get it sorted

The questions remains . What kernel are you using? Did you do a factory reset before flashing?

You must wipe data,system and caches BEFORE installing a custom ROM

[Q] boeffla + cm11 com.phone.android has stopped

hi, im running i9305 UEMK1 running cm11 updated from samsung 4.3 oem (with knox bootloader >.<) everything is running fine on cm own kernel + rom.
but when im trying to flash boeffla 2.1b2 kernel for cm11, it flashes just fine but when it boots up and loads to screen lock "com.android.phone has stopped" pop-up jumps on screen and if i click on the ok button it will just appear again and again
Tried reflashing cm11 + gapps + kernel several times with always wiping cache+ dalvik doesnt help also after restoring cm11 backup, i lost imei but only for cm11's own imei partition->
flashed stock backup, had many fc's but imei + network working -> flashed cm11 + gapps again and now my phone is running fine for everyday use on cm11 but i still want the advantages of custom kernel and answers on that WHY isnt boeffla working on cm (19.03.2014 nightlie btw)

Please wait some time, I will upload the newest kernel in the thread today

[Q] [Help] Flashing CM11 - M9 on S3(I9300), CM stock camera is missing.

I have flashed CM11 - M9 on my Samsung Galaxy S3 (I9300) freshly, doing factory reset and wiping all the data, then flashed PA Gapps Full Modular version. After booting the phone, was getting a prompt "Google Keyboard has stopped", there after was unable to get the keyboard option at all, during setting up the phone and CM account. Again, wiped, factory reset, clear cache and freshly flashed the CM11 - M9 without flashing PA Gapps this time. Booted the phone, got the setting done, noticed that Gapps are already installed in the phone. And CM stock Camera is missing
I have been using CM 11 since a long time, but issue arrived when I flashed Gapps 4.4.3 (Google Stock) to get the latest Google Play , but my CM camera has been replaced with Google Camera which sucks, thereby I have decided to reflashed my phone with CM11 - M9. Now the Stock CM Camera is missing.
Installed CynogenMod Version: 11-20140804-SNAPSHOT-M9-i9300
Someone, please suggest, how to fix this issue?? How to flash a fresh CM11 along with Gapps, which doesn't replace CM stock camera??

CyanogenMod 12.1 for i9300 Camera problem

Hello guys im new here and sorry if i post it wrong. I installed this UNOFFICIAL CyanogenMOD 12.1 for my Galaxy S3 http://forum.xda-developers.com/galaxy-s3/development/5-1-x-cyanogenmod-12-1-t3066864 . And yes i know its an unofficial rom to S3. But i have a question about this i installed it this night worked flawless only problem i have with it now atm and wondering if more of you S3 users use this custom rom. My Camera does not work if i start the camera that follows the CM its says just Camera has stopped working. If i open up google camera the rear/back camera just getting purpel/pink stripes over half the screen and it freeze. Like if i point the camera at my shoes it will just freeze there no matter where i point it.
When i then take picture nothing happens. But the selfie camera (front one) works but not the back one. So my question is should i just try to wipe the data and rom from my Clockworkmod recovery and reinstall the rom? I will point all the steps i did.
Step 1: Rooted stock rom jelly bean 4.3 android version with CF-Auto-Root-m0-m0xx-gti9300.zip through Odin.
Step 2: Made sure by my self the root was success full and it was downloaded the root checker and it told the phone is rooted did also check with SuperSU same there.
Step 3: I installed the CWM 6.0.4.4 through odin v3.09. booted the phone and see that it installed right and it did.
Step 4: Downloaded the CM rom from the first link and putted into my SDcard and gapps for Android 5.1.X from CM wikipedia.
Step 5: Installed ROM Manager from play store. Checked again if my root was succesfully on JB 4.3 it was.
Step 6: Opened ROM Manager and installed the CM 12.1 from the link in this post checked Backup this rom and checked Delete data and cache then restart and install.
Step 7: Install is done booted into recovery mode and installed GAPPS and then downloaded the camera but did not work.
So is it anyway to fix this or have an offical CM 12.1 for S3? And sorry again if i posted wrong