Related
I have a 7" kindle fire HD. When I first got it I rooted it with QemuRoot. I wasn't too worried about doing much, I just added halo launcher and the play store. Everything was good until the launcher quit working. To make a long story short, I had lost root and got it back via Bin4ry. Once again, was lazy and just installed the launcher and went about life.
I lost root again, restored it with Bin4ry and disable updates using KFFA. The launcher works, but I can't get it to be the home button default and there is a lot of junk on there from when I had a freetime membership for my kid.
I would like to reset the device to factory and start over, what do I need to do? Looking at KFFA options 3,4 or 22 look like they would apply, I just wanted to find out what is the preferred method to accomplish this without screwing anything up.
Zuggel said:
I have a 7" kindle fire HD. When I first got it I rooted it with QemuRoot. I wasn't too worried about doing much, I just added halo launcher and the play store. Everything was good until the launcher quit working. To make a long story short, I had lost root and got it back via Bin4ry. Once again, was lazy and just installed the launcher and went about life.
I lost root again, restored it with Bin4ry and disable updates using KFFA. The launcher works, but I can't get it to be the home button default and there is a lot of junk on there from when I had a freetime membership for my kid.
I would like to reset the device to factory and start over, what do I need to do? Looking at KFFA options 3,4 or 22 look like they would apply, I just wanted to find out what is the preferred method to accomplish this without screwing anything up.
Click to expand...
Click to collapse
Either 3 or 4 will work. If you don't remove OTA updates, the Kindle will get an updated pushed onto it and your root will break every time when the Kindle updates. So make sure to remove OTA updates using KFFA as well.
LinearEquation said:
Either 3 or 4 will work. If you don't remove OTA updates, the Kindle will get an updated pushed onto it and your root will break every time when the Kindle updates. So make sure to remove OTA updates using KFFA as well.
Click to expand...
Click to collapse
So I ended up using option 4 and a factory cable, for some reason it would not boot into fast mode via regular usb cable in KFFF. When it got done rebooting, I got a message asking if I wanted to use kindle or holo launcher (which I had previously installed).
That bit confused my, i thought that it would also have been deleted during the restore process?!!? Holo launcher & locker are installed and appears fully functional. Like i said before I would like to get this back to factory and start over. Superuser is on there also, did I forget a step or is there something additional that I need to do? I do not see any other apps other than what it came with.
It did take me to the set up process like on a new kindle.
Sounds like all it did was wipe the data folder. It has to go into fastboot to restore it to stock, if it doesn't want to do it during the process in kffa you can always use a mobile terminal on the kindle itself and type
Code:
su -c "reboot bootloader"
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Zuggel said:
So I ended up using option 4 and a factory cable, for some reason it would not boot into fast mode via regular usb cable in KFFF. When it got done rebooting, I got a message asking if I wanted to use kindle or holo launcher (which I had previously installed).
That bit confused my, i thought that it would also have been deleted during the restore process?!!? Holo launcher & locker are installed and appears fully functional. Like i said before I would like to get this back to factory and start over. Superuser is on there also, did I forget a step or is there something additional that I need to do? I do not see any other apps other than what it came with.
It did take me to the set up process like on a new kindle.
Click to expand...
Click to collapse
Did you use KFFA with a factory cord or a fastboot? When using KFFA, it is best to use a fastboot cord. Booting it into fastboot from USB can be done but I found it did not happen as often using KFFA. You can also use this tool here http://forum.xda-developers.com/showthread.php?t=1951254 and he has a video at the bottom of this page http://androidcowboy.com/2013/06/how-to-return-kindle-fire-hd-to-stock/
You can also try your steps again and try number 3.
stunts513 said:
Sounds like all it did was wipe the data folder. It has to go into fastboot to restore it to stock, if it doesn't want to do it during the process in kffa you can always use a mobile terminal on the kindle itself and type
Code:
su -c "reboot bootloader"
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
It was in fastboot, I used a factory cable to do so before I started KFFA. The screen said "fastboot kindle" or something to that effect.
LinearEquation said:
Did you use KFFA with a factory cord or a fastboot? When using KFFA, it is best to use a fastboot cord. Booting it into fastboot from USB can be done but I found it did not happen as often using KFFA. You can also use this tool here http://forum.xda-developers.com/showthread.php?t=1951254 and he has a video at the bottom of this page http://androidcowboy.com/2013/06/how-to-return-kindle-fire-hd-to-stock/
You can also try your steps again and try number 3.
Click to expand...
Click to collapse
That was my thought, to try it again, I just like to get other thoughts and opinions from those who are much more knowledgeable about andoid operating systems than myself. I will try another wipe tomorrow (option 3) and see if it has the desired effect.
LinearEquation said:
Did you use KFFA with a factory cord or a fastboot? When using KFFA, it is best to use a fastboot cord. Booting it into fastboot from USB can be done but I found it did not happen as often using KFFA. You can also use this tool here http://forum.xda-developers.com/showthread.php?t=1951254 and he has a video at the bottom of this page http://androidcowboy.com/2013/06/how-to-return-kindle-fire-hd-to-stock/
You can also try your steps again and try number 3.
Click to expand...
Click to collapse
I tried option 3 twice with the same results. I am downloading KFHD and will give that a go tomorrow.
Zuggel said:
I tried option 3 twice with the same results. I am downloading KFHD and will give that a go tomorrow.
Click to expand...
Click to collapse
KFHD?
LinearEquation said:
http://forum.xda-developers.com/showthread.php?t=1951254 and he has a video at the bottom of this page http://androidcowboy.com/2013/06/how-to-return-kindle-fire-hd-to-stock/
Click to expand...
Click to collapse
LinearEquation said:
KFHD?
Click to expand...
Click to collapse
The link you gave me, that was the file name for the tool.
Zuggel said:
The link you gave me, that was the file name for the tool.
Click to expand...
Click to collapse
Oh gotcha. Yea, that's a System.img Restore Tool. Same idea as KFFA but a different method.
LinearEquation said:
KFHD?
Click to expand...
Click to collapse
Correct.
Zuggel said:
I tried option 3 twice with the same results. I am downloading KFHD and will give that a go tomorrow.
Click to expand...
Click to collapse
I tried to run the script myself and see exactly what you are talking about. I left a comment in Chris's thread. I'm sure he will give us the skinny on it.
Zuggel said:
I have a 7" kindle fire HD. When I first got it I rooted it with QemuRoot. I wasn't too worried about doing much, I just added halo launcher and the play store. Everything was good until the launcher quit working. To make a long story short, I had lost root and got it back via Bin4ry. Once again, was lazy and just installed the launcher and went about life.
Click to expand...
Click to collapse
OK, so here is how I worked it tonight. KFFA is a great utility but something hiccuped today. So here is the work around I just did.
First thing is root is needed for the restore utility to work. So root using this http://forum.xda-developers.com/showthread.php?t=2351201
Now you can restore to 7.2.3 and root (all one process) using KFHD System.img Restore. Choose the "KFHD_SRT_v1.3.0- 7.2.3 (separate option for restoring factory recovery)" download here http://forum.xda-developers.com/showthread.php?t=1951254 This will root your tablet and give you a couple Gapps and Play Store.
Then use KFFA to "Disable Amazon OTA updates." Make sure to look for a Super User request right after you click to proceed so the process suceeds.
Now you can proceed with using the installed Play Store or installing a 2nd bootloadr/custom rom
This is the process that worked for me. Make sure you give the restore tool plenty of time to work. It can be done by booting your KFHD into fastboot by using fastboot commands or a factory cable. Here is a video concerning the restore tool listed https://www.youtube.com/watch?v=k-8lTMLCGfE
LinearEquation said:
KFHD?
Click to expand...
Click to collapse
LinearEquation said:
OK, so here is how I worked it tonight. KFFA is a great utility but something hiccuped today. So here is the work around I just did.
First thing is root is needed for the restore utility to work. So root using this http://forum.xda-developers.com/showthread.php?t=2351201
Now you can restore to 7.2.3 and root (all one process) using KFHD System.img Restore. Choose the "KFHD_SRT_v1.3.0- 7.2.3 (separate option for restoring factory recovery)" download here http://forum.xda-developers.com/showthread.php?t=1951254 This will root your tablet and give you a couple Gapps and Play Store.
Then use KFFA to "Disable Amazon OTA updates." Make sure to look for a Super User request right after you click to proceed so the process suceeds.
Now you can proceed with using the installed Play Store or installing a 2nd bootloadr/custom rom
This is the process that worked for me. Make sure you give the restore tool plenty of time to work. It can be done by booting your KFHD into fastboot by using fastboot commands or a factory cable. Here is a video concerning the restore tool listed https://www.youtube.com/watch?v=k-8lTMLCGfE
Click to expand...
Click to collapse
I didn't need to root, I have a factory cable (assuming that was why I needed root to get into fastboot?!?). I tried KFHD_SRT_v1.3.5- 7.3.0 and it worked fine, except for some reason I could not turn on wireless. I am trying it again to see if it works out better for me. If not, I will try version 1.3.0
Zuggel said:
I didn't need to root, I have a factory cable (assuming that was why I needed root to get into fastboot?!?). I tried KFHD_SRT_v1.3.5- 7.3.0 and it worked fine, except for some reason I could not turn on wireless. I am trying it again to see if it works out better for me. If not, I will try version 1.3.0
Click to expand...
Click to collapse
You need root to use the restore tool, not get into fastboot, like I stated. If you are not rooted, you can not use the restore tool listed. Use the USB cord to root and the fastboot cord to restore. The fastboot cord to restore to 7.2.3 so you have a matching boot.IMG. Then when flashing a 2nd bootloader and custom rom, you will most likely not bootloop or get a red screen.
I don't mind helping but you should read the help I offer before disregarding. I never BS anyone one here. I really suggest you read some topics on this or you might end up with a paper weight.
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
---------- Post added at 01:49 AM ---------- Previous post was at 01:46 AM ----------
LinearEquation said:
You need root to use the restore tool, not get into fastboot, like I stated. If you are not rooted, you can not use the restore tool listed. Use the USB cord to root and the fastboot cord to restore to 7.2.3 so you have a matching boot.IMG. Then when flashing a 2nd bootloader and custom rom, you will most likely not bootloop or get a red screen.
I don't mind helping but you should read the help I offer before disregarding. Or at least research some threads on here. I never BS anyone one. I really suggest you read some topics on this or you might end up with a paper weight.
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
Click to expand...
Click to collapse
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
LinearEquation said:
You need root to use the restore tool, not get into fastboot, like I stated. If you are not rooted, you can not use the restore tool listed. Use the USB cord to root and the fastboot cord to restore. The fastboot cord to restore to 7.2.3 so you have a matching boot.IMG. Then when flashing a 2nd bootloader and custom rom, you will most likely not bootloop or get a red screen.
I don't mind helping but you should read the help I offer before disregarding. I never BS anyone one here. I really suggest you read some topics on this or you might end up with a paper weight.
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
---------- Post added at 01:49 AM ---------- Previous post was at 01:46 AM ----------
Sent from my Kindle Fire HD 7 running 4.3 Paranoid Android using xda app-developers app
Click to expand...
Click to collapse
When I restored using KFHD, the image was already rooted, or so the title stated. When I replied I had already done what i replied about before I read your suggested route. It's still not right, so I am following your route and hoping the kids sleep long enough for me to finish it in one sitting!!
LinearEquation said:
OK, so here is how I worked it tonight. KFFA is a great utility but something hiccuped today. So here is the work around I just did.
First thing is root is needed for the restore utility to work. So root using this http://forum.xda-developers.com/showthread.php?t=2351201
Now you can restore to 7.2.3 and root (all one process) using KFHD System.img Restore. Choose the "KFHD_SRT_v1.3.0- 7.2.3 (separate option for restoring factory recovery)" download here http://forum.xda-developers.com/showthread.php?t=1951254 This will root your tablet and give you a couple Gapps and Play Store.
Then use KFFA to "Disable Amazon OTA updates." Make sure to look for a Super User request right after you click to proceed so the process suceeds.
Now you can proceed with using the installed Play Store or installing a 2nd bootloadr/custom rom
This is the process that worked for me. Make sure you give the restore tool plenty of time to work. It can be done by booting your KFHD into fastboot by using fastboot commands or a factory cable. Here is a video concerning the restore tool listed https://www.youtube.com/watch?v=k-8lTMLCGfE
Click to expand...
Click to collapse
When I used Bin4ry, it added a second version of superuser to it (not sure if that is important or not), then I chose option 1 (Restore factory rooted with SuperSU) in KFHD. I now have a red triangle asking me to reboot or reset..
I ran option 1 with KFHD 1.3.5, back to working at least, only one version of superuser and the wireless is working. So far so good, and almost out of time right now.
Zuggel said:
When I used Bin4ry, it added a second version of superuser to it (not sure if that is important or not), then I chose option 1 (Restore factory rooted with SuperSU) in KFHD. I now have a red triangle asking me to reboot or reset..
Click to expand...
Click to collapse
You did something wrong. Your lucky you only got a red triangle and not a red screen. You need to restore again. When you are done, before exiting, clear the CASHE and data (think this is option 3 but confirm). You should already have root so use KFHD_SRT_v1.3.0- 7.2.3 (separate option for restoring factory recovery.)
Always make sure ADB and allowing apps from unknown sources is turned on on your tablet. I always turn my tablet to never sleep or an hour so it stays away and turn the brightness up on the screen when modding. Every tool you use, reconfirm the settings are the same.
LinearEquation said:
You did something wrong. Your lucky you only got a red triangle and not a red screen. You need to restore again. When you are done, before exiting, clear the CASHE and data (think this is option 3 but confirm). You should already have root so use KFHD_SRT_v1.3.0- 7.2.3 (separate option for restoring factory recovery.)
Always make sure ADB and allowing apps from unknown sources is turned on on your tablet. I always turn my tablet to never sleep or an hour so it stays away and turn the brightness up on the screen when modding. Every tool you use, reconfirm the settings are the same.
Click to expand...
Click to collapse
It seems to be working great now. Updates disable, holo launcher installed and no more freeze ups (part of why I wanted to redo it). Thank you very much LinearEquation for your help once again. Now my 2 year old can go back to watching youtube and learning educational gem like saying WTF over and over (yes, mom loved that one..of course it was my fault).
Another reason why I wanted to restore it was that I had a freetime membership for a while, a ton of apps and books were downloaded but when the membership was canceled the apps remained it just said "you don't own this" when you tried to use it...very frustrating to a young kid.
So I got the Red Triangle, and I can choose reboot your kindle (which doesn't solve any problem) and Reset to Factory Defaults. Is there any way I can access my kindle folders from the computer. I have some important documents which I don't want to loose
Nope, but that won't matter, because you probably just need to reflash the system partition to fix whatever you did. What exactly did you do before this happened?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Actually I did nothing. The only thing I noticed is that it was low in space for some while. Out of sudden it froze, I closed the tablet and then that message showed. So what do you recommend? Do you have a link with the recommended step. You say I might be able to save my personal data?
I tried one time to root... half year ago. But I gave up, I had a bad tutorial... I don't think I made changes to the system.
rajavan said:
Actually I did nothing. The only thing I noticed is that it was low in space for some while. Out of sudden it froze, I closed the tablet and then that message showed. So what do you recommend? Do you have a link with the recommended step. You say I might be able to save my personal data?
I tried one time to root... half year ago. But I gave up, I had a bad tutorial... I don't think I made changes to the system.
Click to expand...
Click to collapse
A red triangle is just a soft brick. This should be a simple enough fix in regards to what can happen. A red triangle means that the Kindle is, for one reason or another, not booting into the software.
You will need to make or buy a factory fastboot cable so you can access the bootloader. This is the only thing you can do at this point. When you get that cable follow these instructions/tutorials
First you need to restore using KFHD System.img Restore Tool located http://forum.xda-developers.com/showthread.php?t=1951254 This will have you restored with root access.
That root will break when Amazon does an OTA update unless you use Kindle Fire FirstAid to "remove OTA updates." You can go ahead and use it to install Goggle Apps/ Play Store as well. Find that here http://forum.xda-developers.com/showthread.php?t=2096888
Then you can install a 2nd bootloader and TWRP if you want. http://forum.xda-developers.com/showthread.php?t=2271909 and http://forum.xda-developers.com/showthread.php?t=2128848 are both a way. One flashes and one uses ADB commands to pus/pull.
Then slap a ROM on that bad boy. Most of them are found after one of the tutorials listed. About 2/3rds down through the tutorial. http://forum.xda-developers.com/showthread.php?t=2271909
If you get stuck in TWRP without a ROM or a bootloop then use Stunts fix to get a ROM pushed onto TWRP http://forum.xda-developers.com/showthread.php?t=2459498
Here is a great help thread where the 2nd bootloader and TWRP write ups are simplified a bit. I recommend a read of that too http://forum.xda-developers.com/showthread.php?t=2347170
Ok, so I'm a noob when it comes to this stuff, but I have managed to root my Kindle Fire HD 7" and I installed the Google play store, so I was happy thus far. Yesterday I lost root and couldn't figure out why. Today I noticed that my Kindle had done an update from 7.4.6 to 7.4.8 and I'm wondering if this is why I lost root? If so, how can I fix this to get my Kindle back into root? Like I said, I'm a noob and don't want to screw up my Kindle messing around with stuff when I don't have a clue. Any advice would be of great help, thanks in advance.
Oh yeah, I should add this information: I get this pop up from Superuser, "There is no SU binary installed and Superuser can not install it. This is a problem"
Yea when it updates it clears the system partition where the su binary is stored, you need to reroot it. Never heard of a 7.4.8 update, but if it is a new one and you can reroot it then you can just downgrade it with kindle fire first aid by sticking it into fastboot with a simple "adb reboot bootloader", think kffa will do it for you though.
Sent from my Amazon Kindle Fire HD using Tapatalk
masterndentske
stunts513 said:
Yea when it updates it clears the system partition where the su binary is stored, you need to reroot it. Never heard of a 7.4.8 update, but if it is a new one and you can reroot it then you can just downgrade it with kindle fire first aid by sticking it into fastboot with a simple "adb reboot bootloader", think kffa will do it for you though.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
" Never heard of a 7.4.8 update, but if it is a new one and you can reroot it " Hmmmm, the way you worded that makes me feel like I might be stepping into uncharted territory if I try to root it again and I don't like the thought of that. I'll think about it and maybe give it a try tomorrow after I get some sleep and my head is clear. Thanks for the advice, I really appreciate it.
cautiousone said:
" Never heard of a 7.4.8 update, but if it is a new one and you can reroot it " Hmmmm, the way you worded that makes me feel like I might be stepping into uncharted territory if I try to root it again and I don't like the thought of that. I'll think about it and maybe give it a try tomorrow after I get some sleep and my head is clear. Thanks for the advice, I really appreciate it.
Click to expand...
Click to collapse
I had the same problem starting yesterday. My Kindle upgraded to 7.4.8 and any app requiring root stopped working, namely Google Play Store, SuperUser, ... I used KFFirstAide to re-root the Kindle and all is working so far.
blackeyeX2 said:
I had the same problem starting yesterday. My Kindle upgraded to 7.4.8 and any app requiring root stopped working, namely Google Play Store, SuperUser, ... I used KFFirstAide to re-root the Kindle and all is working so far.
Click to expand...
Click to collapse
:good: Awesome, thanks for passing that on to me, I'm going to give it a go and see what happens. I'll post a status update later today after I've had a chance to thoroughly test it.
:victory: Well I got it to root again and reinstalled google play with no issues to report, all went well. So is there a way to stop Amazon from updating my Kindle in the future? Now, the next task is to get a second boot loader on it, although I don't have a fastboot cable, so I'm kinda chicken, hahaha. But I'm feeling confident now, so maybe I'll give it a shot tonight. Wish me luck... A big thanks for the help, I guess I just needed some reassurance on re-rooting the thing and I'm happy.
Just make sure you downgrade the bootloader first, if you don't use the fireflash method then I recommend making sure to check the md5sum of the bootloader before downgrading it so you don't end up with a paperweight.
Sent from my Amazon Kindle Fire HD using Tapatalk
I'm having this issue also. Same update, same loss of SU + Play store.
I can't get my kindle to root like before though. It says it was successful but my fire becomes extremely laggy, no icons appear, where the navigation swipe is there are slightly darker vertical lines and the only way I've fixed it is by factory restore.
How are you rerooting???
I can't remember how I rooted in the first place, I only remember that I had massive issues getting GP store on and used this KFFA which is what I'm now using to reroot.
http://forum.xda-developers.com/showthread.php?t=2069329
Any suggestions would be massively appreciated
kindle fire hd 7.4.8
same thing happen to me so I tried getting adb to work witch it didn't that well, so I downloaded the update .bin file from amazon and edited it useing winRAR just added SuperSU to /system/app then changed a few things in kindle first aid then used a fastboot cable to upload the custom update so my kindle is running v7.4.9 witch I changed it to because it didn't work any other way. i'll make a video
dEADwEIRD said:
I'm having this issue also. Same update, same loss of SU + Play store.
I can't get my kindle to root like before though. It says it was successful but my fire becomes extremely laggy, no icons appear, where the navigation swipe is there are slightly darker vertical lines and the only way I've fixed it is by factory restore.
How are you rerooting???
I can't remember how I rooted in the first place, I only remember that I had massive issues getting GP store on and used this KFFA which is what I'm now using to reroot.
http://forum.xda-developers.com/showthread.php?t=2069329
Any suggestions would be massively appreciated
Click to expand...
Click to collapse
I just followed the same steps as I did the first time I rooted it, I used KFFA. But this time around some of the actions described didn't happen, like Superuser didn't ask for permission as it did the first go around and a few other little things, but I just took it slow and easy and it came out working fine. Also I used KFFA to install GP, it also skipped a few actions, but I just have it a little extra time to do its thing and it works perfectly. I saw a fix for the laggy screen and icons issue somewhere, I think it's in KFFA? I would have to double check that when I get home to be certain.
stunts513 said:
Just make sure you downgrade the bootloader first, if you don't use the fireflash method then I recommend making sure to check the md5sum of the bootloader before downgrading it so you don't end up with a paperweight.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Thanks for the heads up on that, I've held off on doing it until I have more time to research it. I like to feel somewhat comfortable going into it and not totally freaked out. Thanks again, you guys are great around here.
Sorted.
I rooted using The Bin4ry Method and using KFFA to bring all the other systems back on line.
is anyone having problems with ADB and fastboot on 7.4.8?
Because I tried rooting using KFFA that didn't work I kept getting errors so I tried using fastboot to flash the recovery using this code
Code:
fastboot flash recovery recovery.img
I get "device not found" or when it dose work i get "failed to flash" (something like that) but i have the adb drivers installed would there be different ones for 7.4.8? When I type
Code:
fastboot device
it finds the device it just dosn't work when I want to flash
and only half the adb commands work
You have to have it with a special parameter telling it what the kindles vendor id is so it should look like this...:
Code:
fastboot -i 0x1949 flash recovery recovery.IMG
Try that.
Sent from my Amazon Kindle Fire HD using Tapatalk
"... I used KFFirstAide to re-root the Kindle and all is working so far."
I tried using bin4ry's root, which is how I originally rooted my kindle, but it did not work.
I am pleased to say that KFFirstAide was able to restore root.
Thank you xda for pointing me in the right direction!
stunts513 said:
You have to have it with a special parameter telling it what the kindles vendor id is so it should look like this...:
Code:
fastboot -i 0x1949 flash recovery recovery.IMG
Try that.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Thank you!!! i got root access by flashing with twrp recovery witch you can get more info at
http://forum.xda-developers.com/showthread.php?t=2128848
on my other kindle i used Bin4ry root witch work but i had to turn off adb/usb debugging and turn it back on during the process because it wouldn't find the device if i didn't
you can download Bin4ry here
http://forum.xda-developers.com/showthread.php?t=1886460
gregcavaretta said:
on my other kindle i used Bin4ry root witch work but i had to turn off adb/usb debugging and turn it back on during the process because it wouldn't find the device if i didn't
Click to expand...
Click to collapse
Thank's, KFFA not recovered and Bin4ry work only after turn off adb / usb debugging
Ciao dal Max
gregcavaretta said:
Thank you!!! i got root access by flashing with twrp recovery witch i downloaded at
http://teamw.in/project/twrp2/79
on my other kindle i used Bin4ry root witch work but i had to turn off adb/usb debugging and turn it back on during the process because it wouldn't find the device if i didn't
you can download Bin4ry here
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
wtf????? that was a twrp image for the kf1, that should have broken more than it fixed on a kfhd.
Holy ****!!! Your kindle works after flashing the recovery IMG that was for the kf1???
Sent from my Kindle Fire HD 7 running PAC-man
wire55 said:
Holy ****!!! Your kindle works after flashing the recovery IMG that was for the kf1???
Sent from my Kindle Fire HD 7 running PAC-man
Click to expand...
Click to collapse
stunts513 said:
wtf????? that was a twrp image for the kf1, that should have broken more than it fixed on a kfhd.
Click to expand...
Click to collapse
I posted the Wrong link i'm truly sorry if you messed up your kindle fire
Hi Everybody!!
I'm serching for help because i get a bit confused on various guides to install an alternative rom in my Kindle Fire; the point is that this tablet has a stok so that is quite annoying and i wanted to get rid of it.
What i've undertood by now is that i have to:
- Root the device
- Install TWRP/Bootloader
- Install custom Rom
My problem is that i dunno what guide i should follow, because my actual firmware version is 7.4.6, and i've read that i may need to revert back to 7.2.3 and i didn't understood how to do it.
I will need a factory cable? Where I get the software to do it?
Technically you don't need to downgrade the os, only the bootloader. I recommend this guide: http://forum.xda-developers.com/showthread.php?t=2271909
A fastboot cable is not required but is recommended in case you mess up. If your device is not yet rooted you can root it with binary's root. Turn on usb debugging under your kindles security settings and use the drivers in my signature to update the unknown devices drivers. When rooting if you use the latest version of binary's root I believe you must choose "old" as the method to root.
If you follow the tutorial I linked above for twrp and 2nd bootloader there is something I want to point out. When you follow then instructions and open the fireflash app, there should be red warning text about downgrading the bootloader, you need to make sure you check the box above/next to that warning text, somehow people miss it and the result is a red screen brick that only a fastboot cable can fix. Secondly I just recommend to put the ROM and corresponding gapps you plan to flash on the kindle ahead of time. Its just a good idea to in case you get stuck in twrp.
Sent from my Amazon Tate using Tapatalk
It ended up that at the time i posted the question i wasn't on the mood for installing the rom, but today i decided to ge rid of amazon's os, and everything worked like a charm, so thanks!! The video linked in fireflash app post was very well made
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Bob Boblaw said:
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Click to expand...
Click to collapse
I did the same thing, bought the tablet on prime day and was successfully able to root it and put the AOSP nexus rom
First things first make sure you have the 7-inch tablet for the following steps because apparently it only works with that specific model. Since this is my first post I can't post any links so sorry about that however, I have added the video title so that you can just google it and find the video.
Anything above fire os 5.1.2 ( that is 5.1.4, 5.1.3, 5.1.2.1) has to be downgraded to 5.1.2.
Also downgrading from 5.1.4 to 5.1.1 is going to give you a hard brick. I don't know how you didn't know that but it was clearly stated in the xda guide I was following
Basically you have to follow rootjunkys video and instead of using the file he uses in the video use the fire OS 5.1.2 file which is also available on his website.
Imortant: Do a factory reset before downgrading. I did not do that and the rooting process did not work.
Video title: How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet
After you have fire OS 5.1.2 follow the rooting process shown in another rootjunky video
Video title: How to root the Amazon Fire 5th gen 7in on Fire OS 5 1 2 SuperTool Mac linux and Windows
Note: He shows how to do the whole process while using mac but it can be done on windows awell and the windows files are already present. Instead of using the .sh file and opening the terminal double click the .bat file and follow along.
You can use his SuperTool to put the play store app and fire flash app.
Note: For some reason fire flash was not working properly for me by using the SuperTool, so I just installed it from the google play store.
Now you should have rooted fire OS 5.1.2 along with superSU. Now with the fire flash app and you can download any rom that you want to flash. Follow the steps in the video for instructions
Video title: Amazon Fire 5th gen AOSP Nexus rom install with Flash Fire app
Hope this helps.
All credit to rootjunky
erikthebikeman said:
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Click to expand...
Click to collapse
It's not a matter of someone getting off their keister and whipping up a "tool" (presumably you are talking about root) that works with FireOS 5.1.4 or whatever the latest version is. Like many manufactures Amazon actively discourages rooting devices and attempt to block known exploits. It's a cat and mouse game. We may see a "tool" soon, much further down the road or never. Be happy you can root the device at all and be thankful for the individuals who unselfishly share their time and talents with the community.
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Bob Boblaw said:
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Click to expand...
Click to collapse
- no need for a factory reset at any point; offers no benefit for what you are trying to accomplish.
- installation of SuperSU (replacing Kinguser and related Kingroot cruft) after rooting is highly recommended prior to using FlashFire or any other tool that messes with the system partition. The SuperTool can facilitate this otherwise ugly task.
- if you are struggling with RootJunky videos you should give serious consideration to the challenges of installing a custom rom. It doesn't get any easier going forward.
Thanks. I managed to root my Nvidia Shield TV fine so I should be able to do it, I just needed to be clear of the full process from start to finish, and as I wasn't starting from the beginning of the process that made it more confusing. The rootjunky videos are great, but when someone is saying you can use this or that or do this or that it's putting choices and variables in to the mix so it's not a straighforward step by step, and when the kits and the webpages shown on the videos have changed since they were made, for someone trying to piece the info together it takes a bit more time.
Maybe I should point out that I didn't look on here initially when I started trying to do it, I basically saw the fire on offer mentioned on a forum I use and someone said yeah, it's easy to root and get CM on if, just user this video, with the link to a rootjunky YouTube video which didn't mention the prerequisite of already having downgraded the OS (why would it) so in hindsight I didn't start at the right place or have the best information.
After reading through some stuff on here (and that's over whelming for a first timer as there is so much stuff on here for many, many devices and platforms - even just finding the Amazon fire sub forum on an iPad wasn't easy!) I'm getting a better idea for attempt two.
I'll get there, and at least I know how to not brick it now! :good:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (
&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
- Kingroot/Purify, not Kingmaker/Purity
- I can't think of a better suite of guides than the videos produced by RootJunky
- use FlashFire 0.51 to install (flash) the rom of your choice
- OP for Nexus rom has video link and and basic FlashFire guidance
- get over the minor variations in the language/tools used to support this device between the making of videos and the latest release.
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
1. Get the CM rom and put it in the tablet from here: http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
2. Install FlashFire 0.51 from play store or use the SuperTool
3. Follow the video instructions and instead of the nexus rom use the CM rom you downloaded:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Bob Boblaw said:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Click to expand...
Click to collapse
Reinstall FlashFire 0.51 (here) on CM 12.1 then use it to flash the GAapps package. Agree with your selection: ARM/5.1/nano.
Ah, great, thank you, yep, that's got it on there.
Excellent! All modded and running very quickly! Thanks for the help guys, I appreciate the patience.
Not much space on these Fire's is there, it's already telling me it's low on space and I've only installed MediaMonkey!
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage? For example, my Shield TV lets me 'add' the SD card to the main storage so it sees it all as one instead of a second removable device, so can install apps on it, etc. If this possible with Cyanogenmod? (Not sure what you'd call that feature to search for it!) Thankfully the main reason I bought it was to help manage my music with MediaMonkey so I won't be installing lots on it, but if it is possible it would be useful.
Second, with regard to OS updates on CM, are they automated or do they need to be done manually (and, if so, with care?)
Thanks again!
Bob Boblaw said:
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage?
Second, with regard to OS updates on CM, are they automated or do they need to be done manually ...
Click to expand...
Click to collapse
Short answer: 'yes'. There are various approaches to utilizing SD cards for app installation/storage each with pros, cons and compromises. I highly recommend using a tool that leverages 'symbolic links' which is by far the most reliable method. An example is Link2SD which you can find in the Play Store.
All custom roms for this device are updated manually via FlaahFire or TWRP (if available). Instructions can usually be found in the OP.
@Bob Boblaw
did you open up the file manager and install the flashfire.apk? I am on the same problem you had on your post #11, but my problem I ran into now is flash fire says "root access could not be acquired" otherwise this would be a easy to do.
I think I might have to reinstall everything and start over. >_<
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Bob Boblaw said:
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Click to expand...
Click to collapse
Yes! Thank you, that is what I had missed plus I didn't reboot my device so took like 15mins trying to figure out why it wasn't still working.
Glad you got it working ! :good:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
thunderman98 said:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
Click to expand...
Click to collapse
You can not boot/install/use twrp on this device unless running FireOS 5.0.1 or lower. Nor can you rollback to any version below 5.1.2 without bricking the device. FlashFire is the tool of choice for installing roms and performing other maintenance tasks that are typically done in a custom recovery environment.