HELP!!! phone wont boot into recovery - Motorola Atrix HD

i cant get it to go into recovery by pushing the vol down and power buttons. When i press all three side buttons i get the stock recovery but still wont boot into recovery it just shows the android opened up and i cant figure out how to fix it.

Did you even unlock the bootloader and flash a custom recovery?
Sent from my MB886 using xda app-developers app

ya i was kind of brief in the post the bootloader is unlocked and the phone is rooted and ive had a few different roms on it know it wont boot into recovery so i can put a new rom on it. Awhile back i was not happy with any roms so i used RSD Lite to turn it back to stock ever since then i cant boot into recovery.

bpc87 said:
ya i was kind of brief in the post the bootloader is unlocked and the phone is rooted and ive had a few different roms on it know it wont boot into recovery so i can put a new rom on it. Awhile back i was not happy with any roms so i used RSD Lite to turn it back to stock ever since then i cant boot into recovery.
Click to expand...
Click to collapse
That's because when you use RSD it deletes your custom recovery. You need to flash the recovery again. Remember, the command is:
fastboot flash recovery recovery.IMG
Where recovery.IMG is your custom recovery name. You can check a manual in the android development forum for Atrix HD.
Sent from my Atrix HD using xda app-developers app

Related

I need help!!! I cannot enter to recovery mode!!

After I unlock the boot-launcher through htcdev.com, i cannot access to the recovery mode, it always has problems when processing. So I follow a tip in the internet to install an CMW recovery, now my phone stop at HTC logo, cannot do anything more. I really need help, can somebody help me? I just bought this phone 5 days ago, I'm now so scared if it really died!!!
Belongs in general section... Did you flash the boot.img of your ROM?
OMG.... I didnt know that. Could you give me full guide?
I have done
Unlock boot-launcher
cannot access to recovery and then install CMW.
Never heard about boot.img @@!
abc_8989 said:
OMG.... I didnt know that. Could you give me full guide?
I have done
Unlock boot-launcher
cannot access to recovery and then install CMW.
Never heard about boot.img @@!
Click to expand...
Click to collapse
No, I don't have much time. just use the search function, you'll find sth First install a ROM of your choice. The boot.img is in the .zip of the ROM. Search down a guide and flash it via adb.
--> http://forum.xda-developers.com/showthread.php?t=1337105
My phone died at recovery mode. I cannot use flash from zip card. Argh, I may come back to ugly-htc-sense. (
Do you know that you need to hold down power + volume down to access recovery? (must be done exactly after you power on your phone; b4 HTC logo)
Yes, I hold the volume down and power key, and then the boot launcher appears, then I select recovery and stuck at HTC logo (
Try flashing a new recovery image, then once you flash a new rom, boot into fastboot and flash the boot.IMG inside the Rom
Sent from my HTC One V using xda premium
I try http://forum.xda-developers.com/showthread.php?t=1337105
but still stuck at htc logo argh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
could someone give me new recovery file? the one in the follow post has died. (
Just install the 4ext recovery app flash the recovery from there
What did you flash CWM with? Try using rom manager and it will do it all for u
Make sure you arent trying to flash the wrong rom or recovery for your device, the inc2 is vivow, the incS is vivo, what does your bootloader say at the top?
Sent from my HTC One V using xda premium
just try booting the ROM, see whether it boots in to recovery.
there is one time i made a mistake and i flash the recovery in to the boot.
and the actual boot file i flash in to recovery.
thank you guys all, just tried again and and it worked!!! Now I'm on JB 4.1/
Thank you guys all for visitng my thread and helping me . TYTYTYT!!!!!
would be good if you posted how you fixed, for future reference.

[How To] CWM Recovery

With the new boot loader unlock it comes time to use a recovery other than safe strap. The easiest way to flash a custom recovery, in this case, clockwordmod recovery, is to simply download ROM Manager and use it to flash the Motorola Photon Q version of CWM Recovery. I flashed it and booted into it and haven't experienced any problems as of yet so for those looking for a custom recovery straight out of the gate, this is for you.
Sent from my MB886 using xda premium
Nice i don't know if i should try it or wait for an official one for our device. In the mean time back to my nexus 4
Sent from my MB886 using xda premium
If you really want to give it a spin you can always flash the Photon Q version otherwise I'm sure there will be an official version ported soon
Sent from my MB886 using xda premium
Dumb question...... if I uninstall ss and install cwm will I lose the current ROM im using?
Sent from my MB886 using xda app-developers app
You'll have to reinstall yes.
Sent from my JokerMATRIX HD MAXX
Dumb question part 2..... uninstall ss first and then install cwm? Also erase all ROM slots before uninstalling? Thanks!
Sent from my MB886 using xda app-developers app
Yea make sure to erase the rom slots. I forgot to and uninstalled then was missing quite a bit of space lol.
Sent from my JokerMATRIX HD MAXX
I was thinking it might be a good idea lol. Thanks!
Sent from my MB886 using xda app-developers app
it actually works. lol
freshlycutlawn said:
With the new boot loader unlock it comes time to use a recovery other than safe strap. The easiest way to flash a custom recovery, in this case, clockwordmod recovery, is to simply download ROM Manager and use it to flash the Motorola Photon Q version of CWM Recovery. I flashed it and booted into it and haven't experienced any problems as of yet so for those looking for a custom recovery straight out of the gate, this is for you.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Have you flashed anything with it?
I haven't actually tried yet flashing a ROM but since I'm on stock and don't want to flash white yet I haven't had the opportunity, as long as its flashing to the device it should work with no problems
Sent from my MB886 using xda premium
freshlycutlawn said:
I haven't actually tried yet flashing a ROM but since I'm on stock and don't want to flash white yet I haven't had the opportunity, as long as its flashing to the device it should work with no problems
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
So far, i have installed the cwm for the photon q like you, and made a back up through it. Im going to see if it will restore from it as well. ill keep everyone updated.:good:
:edit: I sucessfully backed up my stock JB rom, wiped everything, and restored everything back and everythings perfect... I dont know what else to try before attempting to flash using the photon CWM. any ideas?
I uses the photon q recovery to backup & restore, and haven't had any issues yet. No ROM flashing for the time being, just haven't tried it yet.
Sent from my MB886 using xda premium
I Flashes AOSPizza and was getting a bootloop, had to start the phone in DB Mode from the Fastboot menu to get it to start up, charging my battery and will be restoring original at&t firmware as soon as possible....Dont need a brick just bought this!
I'm on aosp pizza but I reverted to the stock jelly bean system. Mounted system installed the aosp ROM the Mexico firmware was giving me hell except with cm 10
Sent from my Nexus 4 using xda app-developers app
DaveNavy said:
I Flashes AOSPizza and was getting a bootloop, had to start the phone in DB Mode from the Fastboot menu to get it to start up, charging my battery and will be restoring original at&t firmware as soon as possible....Dont need a brick just bought this!
Click to expand...
Click to collapse
Did you try to go back into CWM and wipe everything again after the boot loops? That sometimes helps when it is boot looping after an install.
bconcio said:
Did you try to go back into CWM and wipe everything again after the boot loops? That sometimes helps when it is boot looping after an install.
Click to expand...
Click to collapse
I tried the same thing with cm10, i tried 3 times and got bootloops on each, in the end, at least we know the back up and restore function works well.:good:
jbatacan said:
I tried the same thing with cm10, i tried 3 times and got bootloops on each, in the end, at least we know the back up and restore function works well.:good:
Click to expand...
Click to collapse
I'm Stock Again, Restart always sent me to fastboot with a failed flash error, I could back out of it to the pizza ROM each time however I don't want to depend on my phone booting incorrectly so I used RSD and I'm stock again, I'm going to give it another try tonight.
UPDATE...Reflashed everything started over and everything works PERFECT Yippie!!! I'm very pleased!!!!
Running AOSPizza and Loving it!
DaveNavy said:
I'm Stock Again, Restart always sent me to fastboot with a failed flash error, I could back out of it to the pizza ROM each time however I don't want to depend on my phone booting incorrectly so I used RSD and I'm stock again, I'm going to give it another try tonight.
UPDATE...Reflashed everything started over and everything works PERFECT Yippie!!! I'm very pleased!!!!
Running AOSPizza and Loving it!
Click to expand...
Click to collapse
So what was your full procedure? I want to try this and try to install CM10 later.
From what I read, you installed the Photon Q CWM, installed Pizza through that, got boot loops, flashed back to stock, then installed Pizza again?
bconcio said:
So what was your full procedure? I want to try this and try to install CM10 later.
From what I read, you installed the Photon Q CWM, installed Pizza through that, got boot loops, flashed back to stock, then installed Pizza again?
Click to expand...
Click to collapse
Fastboot was kicking errors and was boot looping into fastboot with firmware flash fail, I found however I could start into AOSPizza in DB mode (Safe Mode) , so I did that, charged up the phone 100% then used RSDLite and Reflashed Stock current firmware, it however does not re-lock the bootloader as some have mentioned might be the case in other post's, from there I started up the phone,turned on usb debug, used "motochopper" to root it, then installed Rom Manager from the market, flashed clockwork to device with the Photo Q CWM , copied AOSPixxaV1.zip ( The ROM ) and GappizzaV1.zip to the Phones internal storage not on the external SD memory card, from there went to clockwork mod on my atrix opened up the program and selected to reboot into recovery, went to the mounts and storage then select Mount System then go back then install zip from sd card then choose zip from sd card, then scroll to your rom and select it and it will flash when its complete you will go back and go to reboot system now, it will ask you if you want to bypass stock recovery on boot select it and your phone will reboot into AOSPizza......Have Fun!

CWM recovery?

OK here's the deal, I have my phones boot loader unlocked and its rooted, now I want to install cwm, on all my previous devices I did this through ROM manager but atm our device is not supported there. However I saw a guy on here (can't remember his name) use a twrp recovery from the photon q on our device, can I do the same with cwm in ROM manager? Or are there compatibility issues?
Sent from my MB886 using xda app-developers app
They used the photon for cwm. Don't do that though. Use our official one located in the development section.
Sent from my PACMAN MATRIX HD MAXX
UhmierSmith said:
OK here's the deal, I have my phones boot loader unlocked and its rooted, now I want to install cwm, on all my previous devices I did this through ROM manager but atm our device is not supported there. However I saw a guy on here (can't remember his name) use a twrp recovery from the photon q on our device, can I do the same with cwm in ROM manager? Or are there compatibility issues?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
This tool should solve your problem and then some.
http://forum.xda-developers.com/showthread.php?t=2262726
Enjoy!
Sent from my PACman Atrix HD using XDA Premium
Blackest Pain said:
This tool should solve your problem and then some.
http://forum.xda-developers.com/showthread.php?t=2262726
Enjoy!
Sent from my PACman Atrix HD using XDA Premium
Click to expand...
Click to collapse
Do this but replace the cwm.img in "*\Myth Tools\tools" folder with the one from this thread or just use the one from that thread up front, no need to hassle with replacing files or anything. Go to the thread I linked, download the file, boot your phone into fastboot and run the command from the thread inside the folder the cwm.img is in.
penser said:
Do this but replace the cwm.img in "*\Myth Tools\tools" folder with the one from this thread or just use the one from that thread up front, no need to hassle with replacing files or anything. Go to the thread I linked, download the file, boot your phone into fastboot and run the command from the thread inside the folder the cwm.img is in.
Click to expand...
Click to collapse
Thanks^ I completely forgot to include that :highfive:
I'm going to jump on this thread too.
I'm having issues, I can seem to get CWM to install. I have rooted/unlocked. I replaced the cwm with the newer one. I used the myth tool to reboot into Fastboot, while on the unlocked screen, I ran the recovery on the tool. The phone restarted, but I figure out how to get to cwm recovery, or if it even worked.
jblaylock said:
I'm going to jump on this thread too.
I'm having issues, I can seem to get CWM to install. I have rooted/unlocked. I replaced the cwm with the newer one. I used the myth tool to reboot into Fastboot, while on the unlocked screen, I ran the recovery on the tool. The phone restarted, but I figure out how to get to cwm recovery, or if it even worked.
Click to expand...
Click to collapse
adb reboot recovery or hold down volume up and power button when turning the phone on or hold down volume up, volume down and power button when powering on then in the boot options screen use volume down to move highlight and volume up to select.
frog1982 said:
adb reboot recovery or hold down volume up and power button when turning the phone on or hold down volume up, volume down and power button when powering on then in the boot options screen use volume down to move highlight and volume up to select.
Click to expand...
Click to collapse
I know how to access the boot menu. All I get is the stock menu, not the CWM menu
jblaylock said:
I know how to access the boot menu. All I get is the stock menu, not the CWM menu
Click to expand...
Click to collapse
it did not install then either fastboot flash or install with terminal links on to do both are below.
http://forum.xda-developers.com/showthread.php?t=2226527
http://forum.xda-developers.com/showthread.php?t=2249467&highlight=terminal
frog1982 said:
it did not install then either fastboot flash or install with terminal links on to do both are below.
http://forum.xda-developers.com/showthread.php?t=2226527
http://forum.xda-developers.com/showthread.php?t=2249467&highlight=terminal
Click to expand...
Click to collapse
Thanks for your help, it much appreciated. However, I think I'll have to bow out now. This stuff is over my head. I was really hoping to get PA on my phone, but I'll just have to settle for TasKarou launcher for pie controls. Thanks for everybody's help.
jblaylock said:
Thanks for your help, it much appreciated. However, I think I'll have to bow out now. This stuff is over my head. I was really hoping to get PA on my phone, but I'll just have to settle for TasKarou launcher for pie controls. Thanks for everybody's help.
Click to expand...
Click to collapse
Don't give up just yet. It's worth it to get custom ROMs on your phone.
Do a search around the forums here and you'll find a custom build of a CWM based recovery by mattlgroff made for this phone. Flash that to recovery with fastboot and you should then be able to flash custom ROMs without fear of screwing up your phone.
You may also want to flash a stock firmware with RSD-Lite. (not the recovery!)
Some users have had issues with GPS not working until after you flash stock and then go to a custom ROM after getting a GPS fix on stock. I don't know if that is still necessary or not, but it's something to keep in mind.
spy_1134 said:
Don't give up just yet. It's worth it to get custom ROMs on your phone.
Do a search around the forums here and you'll find a custom build of a CWM based recovery by mattlgroff made for this phone. Flash that to recovery with fastboot and you should then be able to flash custom ROMs without fear of screwing up your phone.
You may also want to flash a stock firmware with RSD-Lite. (not the recovery!)
Some users have had issues with GPS not working until after you flash stock and then go to a custom ROM after getting a GPS fix on stock. I don't know if that is still necessary or not, but it's something to keep in mind.
Click to expand...
Click to collapse
I have tried to flash the latest CWM via the myth tool. I tried flashing as option 1, CWM and option 2, custom recovery. Neither has worked. I about to go crazy. What do I do here?
jblaylock said:
I have tried to flash the latest CWM via the myth tool. I tried flashing as option 1, CWM and option 2, custom recovery. Neither has worked. I about to go crazy. What do I do here?
Click to expand...
Click to collapse
Just download the recovery file and boot you phone into boot loader, connect phone to PC... In cmd, type "fastboot flash recovery recover_name.img" without quotes and recovery_name being the name of your recovery file..
Sent from my Atrix HD using xda app-developers app
Aingaran said:
Just download the recovery file and boot you phone into boot loader, connect phone to PC... In cmd, type "fastboot flash recovery recover_name.img" without quotes and recovery_name being the name of your recovery file..
Sent from my Atrix HD using xda app-developers app
Click to expand...
Click to collapse
Just to clarify, do I download it to my cpu or phone? Where do I open cmd, in the folder on Windows for the phone?
Sent from my Nexus 10 using Tapatalk HD
jblaylock said:
Just to clarify, do I download it to my cpu or phone? Where do I open cmd, in the folder on Windows for the phone?
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Download it to your computer and open command prompt in the folder where both fastboot files and your downloaded recovery file is present...
Sent from my Atrix HD using Tapatalk 4 Beta
Aingaran said:
Download it to your computer and open command prompt in the folder where both fastboot files and your downloaded recovery file is present...
Sent from my Atrix HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
Tried it this morning, still cannot get cwm to flash. This is very frustrating.
I've tried like 4 more times, using Myth and using command prmt, still only get the stock recovery. What am I not doing?
come on guys, I know somebody can help me here. I'm dying to get PA rom on this phone.
Sent from my Nexus 10 using Tapatalk HD
jblaylock said:
come on guys, I know somebody can help me here. I'm dying to get PA rom on this phone.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
terminal will always work just remember your internal SD card is named sdcard0 and your external is named sdcard1.
http://forum.xda-developers.com/showthread.php?t=2249467&highlight=terminal
Do I have to erase my stock recovery prior to flashing cwm?

stuck on recovery

i unlocked my phone bootloader after that i flashed cwm recovery via toolkit but after that my phone just stuck on cwm,i rebooted so manyy time but no luck.i tried diffrent recoveries and kernals but facing same issue.sometime phone shows black screen after reboot.plz i need help.i am from india.
What is the need to state that you are from India?! Anyways, if you're not having any luck, you could always flash an RUU to go completely back to stock and start over. I also highly recommend TWRP over CWM, but that is mostly my own opinion.
Sent from my One using Tapatalk 4
mangesh hotkar said:
i unlocked my phone bootloader after that i flashed cwm recovery via toolkit but after that my phone just stuck on cwm,i rebooted so manyy time but no luck.i tried diffrent recoveries and kernals but facing same issue.sometime phone shows black screen after reboot.plz i need help.i am from india.
Click to expand...
Click to collapse
fastboot erase cache
Sent from my HTC One using xda app-developers app

[Q] [Help] bootloop with no recovery

I tried to flash the new Kitkat ROM on my stock-rooted ROM but flashed it wrong (as my bootload is not unlocked as needed).
Now I'm stuck on bootloop when I see the new ROM's logo showing up for few seconds but reboot imediately..
My recovery is also gone.. I can't access it.. (I have my backup there, I only need to reach it)
I tried to use flashtool and adb but I can't control them..
How can I flash CWM recovery through any of them?
Please provide link and explain I'm freaking out here..
Thanks!
mcjordan92 said:
I tried to flash the new Kitkat ROM on my stock-rooted ROM but flashed it wrong (as my bootload is not unlocked as needed).
Now I'm stuck on bootloop when I see the new ROM's logo showing up for few seconds but reboot imediately..
My recovery is also gone.. I can't access it.. (I have my backup there, I only need to reach it)
I tried to use flashtool and adb but I can't control them..
How can I flash CWM recovery through any of them?
Please provide link and explain I'm freaking out here..
Thanks!
Click to expand...
Click to collapse
Use fastboot to flash... Just make sure your phone is in fastboot/flash mode first
If your on locked boot loader then you have to do a ftf/flash tool restore
Sent from my C6603 using XDA Premium 4 mobile app

Categories

Resources