Hi am trying to reinstall from scracth to my HTC one i am a total Noob i admit and think i have Bricked my phone Help me out .
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.161.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35AW901680
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
VODAP001 = CID
3.63.161.6 = Version Main
also when i run boot loader to install rom i keep getting the message
FAILED (remote: 12 signature verify fail)
finished. total time: 84.256s
Don't worry it can be fixed , same issue I had before , first tell me can are you unlock , temporary ????
HTC One M7 ( International )
relocked
I relocked the phone with fastboot
Stuck at bootloader Screen Help
have tryed numerous ways to get back to stock and cannot need help thanks
pely15967 said:
OTA_M7_UL_JB43_SENSE55_MR_Vodafone_UK_3.63.161.6-2.24.161.1_release_340013akpd6pd8gw00infp
the above RUU his what i get the errors with also and the original RUU that i got from downloading the update but i accidently deleted sorry
Click to expand...
Click to collapse
1- go back to your post and remove IMEI, that shouldnt be shared online.
2- an OTA is not a RUU.... there is now way to flash an OTA!!
3- there is no ruu for you
4- go unlock your bootloader again
5- what's the whole point of this exercise?
unlocked
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
pely15967 said:
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
Click to expand...
Click to collapse
5- what's the whole point of this exercise?
pely15967 said:
Have just unlocked my HTC one with HTCdev so am not unlocked again but no idea where to go from here
Click to expand...
Click to collapse
You need to flash custom recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
when you get in TWRP you need to adb sideload a rom
TWRP / Advanced / Sideload
From PC adb /fastboot folder
you use
adb sideload guru_reset_m7_2-24-161-1-zip
you get it here >> http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
When installing the Reset choose Yes to install stock recovery and No to Root
this will allow you to take the OTA update. After setting up your phone takeing all the OTA updates
then flash back your custom recovery and Root
nkk71 said:
5- what's the whole point of this exercise?
Click to expand...
Click to collapse
I think he tried to install the OTA as a ruu and it borked his phone
rumrunner error
C:\Users\Paul\Desktop\fastboot>fastboot flash zip hboot_rumrunner_2.24_401.8.zip
sending 'zip' (517 KB)...
OKAY [ 0.232s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 0.475s
am i doing something wrong ?
pely15967 said:
C:\Users\Paul\Desktop\fastboot>fastboot flash zip hboot_rumrunner_2.24_401.8.zip
Where did this come from ????
What Happened to the Guru reset I linked you
sending 'zip' (517 KB)...
OKAY [ 0.232s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 99 unknown fail)
finished. total time: 0.475s
am i doing something wrong ?
Click to expand...
Click to collapse
Why are you flashing a custom Hboot ?
download stuck
TWRP 2.6.3.3 download is stook at 99.99% any other place to download the file ?
Sorry clsA didnt see your post thanks for the links will try sort my mess up thanks will let you know how it goes thanks once again
pely15967 said:
TWRP 2.6.3.3 download is stook at 99.99% any other place to download the file ?
Sorry clsA didnt see your post thanks for the links will try sort my mess up thanks will let you know how it goes thanks once again
Click to expand...
Click to collapse
here's my TWRP
https://www.dropbox.com/s/bzep2vfb5pphr45/openrecovery-twrp-2.6.3.3-m7.img
back to TWRP
have put the guru rest rar into fastboot folder when i go to sideload it gives me 2 options
1 wipe Delvik Cache
2 wipe cahe
sorry i am a total Noob at this
pely15967 said:
have put the guru rest rar into fastboot folder when i go to sideload it gives me 2 options
1 wipe Delvik Cache
2 wipe cahe
sorry i am a total Noob at this
Click to expand...
Click to collapse
check both and swipe to begin sideload
and it's gurureset.zip not rar
from command prompt on pc
adb sideload gurureset.zip
Didn't I already say all this ?
when you get in TWRP you need to adb sideload a rom
TWRP / Advanced / Sideload
From PC adb /fastboot folder
you use
adb sideload guru_reset_m7_2-24-161-1.zip
Click to expand...
Click to collapse
errors
tryed wiping the cache and get errors show in picture
pely15967 said:
tryed wiping the cache and get errors show in picture
Click to expand...
Click to collapse
so try again and don't choose wipe cache
still getting errors
Sorry but i am still geting the same errors in ADB sideload even with not wiping the caches
pely15967 said:
Sorry but i am still geting the same errors in ADB sideload even with not wiping the caches
Click to expand...
Click to collapse
then you need to
adb push guru_reset_m7_2-24-161-1.zip /sdcard/
I'm assuming that's the name of your file, if not correct it
push
Think i have pushed the Guru zip but when i goto install in TWRP i get what his shown in the picture what do i need to do now ? no matter how long i wait it his still saying the same do i reboot phone ? then go back nto recovery ?
rebooted
Rebooted back into recovery and the push didnt work managed to delete all cache and got sideload to load up on phone but just my luck it wont work in dos window
Related
Hello
I have HTC one m7_u cid 332 hboot 1.55
For my phone there is no stock RUU searched every where
Phone is hang on HTC logo
I can go to fast boot menu tryed to unlock bootloader with htcdev but not work
My question is there any way to s-off or unlock boot loader without USB debugging on ?????
Tanx
afghan-gsm-mastermind said:
Hello
I have HTC one m7_u cid 332 hboot 1.55
For my phone there is no stock RUU searched every where
Phone is hang on HTC logo
I can go to fast boot menu tryed to unlock bootloader with htcdev but not work
My question is there any way to s-off or unlock boot loader without USB debugging on ?????
Tanx
Click to expand...
Click to collapse
bootloader is unlocked with fastboot not adb, so usb debugging is not required. Btw usb debugging only affect the usb connection when the phone is booted in the OS so its does not affect bootloader unlocking, fastboot commands or adb commands from recovery.
alray said:
bootloader is unlocked with fastboot not adb, so usb debugging is not required. Btw usb debugging only affect the usb connection when the phone is booted in the OS so its does not affect bootloader unlocking, fastboot commands or adb commands from recovery.
Click to expand...
Click to collapse
I tried unlocking bootloader with htcdev all thing gose OK but after restart phone is lock again I should say phone is dead and hang on HTC logo
Waiting for help .......
afghan-gsm-mastermind said:
Waiting for help .......
Click to expand...
Click to collapse
how are we suppose to help you with a locked bootloader ?
clsA said:
how are we suppose to help you with a locked bootloader ?
Click to expand...
Click to collapse
I've told him this in a previous thread. . Without an unlocked bootloader he is stuck.. He has to unlock first...
Sent from my GT-I9505 using XDA Premium 4 mobile app
s-on, No Os, unlocked, got twrp. Cant install stock RUU!!
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot
AnonZA said:
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot
Click to expand...
Click to collapse
Post a fastboot getvar all minus imei no and serial no. Post links to recovery's you have tried and links to RUU'S. and also commands you have tried to flash recovery and RUU's
Sent from my GT-I9505 using XDA Premium 4 mobile app
AnonZA said:
Hi. Im a little bit confused with my HTC__016 One M7, My phone is currently S-On with no Os and no recovery image. I cant transfer a stock ruu to my phone or twrp to install. I have tried using adb and fastboot, I have cleared all caches too. If i boot into recovery and i use twrp to fix permissions it says E: Unable to mount data and cache. I have tried adb sideload aswell and it seems to work but then always fails at the certificate verification.. I assume that this is S-On's fault. How should i proceed? I dont want to hard brick my device, i still have my basebands too thank goodness..
What can I do to fix my phones file system or how can i transfer the stock RUU.. I have tried 3 diferent stock RUUs and they all fail at certificate verification. I would really appreciate the help..
Thanks A lot
Click to expand...
Click to collapse
sounds like your trying to sideload a RUU.zip .. that won't work
to flash RUU.zip use
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip <<yes two times
fastboot reboot
you just need the rom.zip in the same folder as fastboot
HTC__016
bored_stupid said:
Post a fastboot getvar all minus imei no and serial no. Post links to recovery's you have tried and links to RUU'S. and also commands you have tried to flash recovery and RUU's
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__016
(bootloader) battery-status: good
(bootloader) battery-voltage: 3847mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
---------- Post added at 04:00 PM ---------- Previous post was at 03:55 PM ----------
clsA: I tried those command million of times. It kept coming back with "boot loader signature verification..." My phone is WIPED as you can see. So usb debugging is off presumably..
Click to expand...
Click to collapse
You have the international M7 ul so download and install this rom. Follow the guide on installing
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Sent from my GT-I9505 using XDA Premium 4 mobile app
I Formatted partition using "How to: Fix a corrupted DATA partition on the HTC One" Then tried these commands (1) fastboot oem rebootRUU (2) fastboot flash zip rom.zip
{C:\Users\####\Desktop\Mini SDK>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1239446 KB)...
OKAY [ 46.879s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 61.244s
I think my next step is a stock stock RUU right?
Thanks a lot for the help..
Wrong one Apparently..
bored_stupid said:
You have the international M7 ul so download and install this rom. Follow the guide on installing
(LINK)
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I ran with admin rights, went through all the windows till i said update.. then i get error code 155, and that error code means incorrect ROM according to the programs readme!
What other ROM should I try?
Sorry to be such a pain.. I just need to use my device again.. lol
AnonZA said:
I Formatted partition using "How to: Fix a corrupted DATA partition on the HTC One" Then tried these commands (1) fastboot oem rebootRUU (2) fastboot flash zip rom.zip
{C:\Users\####\Desktop\Mini SDK>fastboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1239446 KB)...
OKAY [ 46.879s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 61.244s
I think my next step is a stock stock RUU right?
Thanks a lot for the help..
Click to expand...
Click to collapse
Basically you are trying to flash a file in the bootloader that is not intended to be flashed that way. Use custom recovery or it may be an update, in that case it needs stock recovery.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Hello.
I'm having an issue with my phone and I really can't fix it. I've tried for a few days before posting here.
I have CWM installed, but I first had TWRP. It's an HTC by Telus, Canada.
So, the problems:
I can't factory reset since it will give me errors like "error mounting /data" and "error mounting /sdcard/.android_secure"
I can't even acccess the sdcard, it will say "E: Can't mount /sdcard" so I definitely cant install a new ROM
I had installed CM 11 but it will never go pass the logo (I'm assuming it can't since sdcard is unavailable)
I tried installing via ADB sideload and I get "* failed to write data 'protocol fault (no status)' *"
I'm desperate I have no idea what to do and where to start.
Thanks
P.S. : I don't remember how to output all the information like version-main and stuff, I'd do it with pleasure if someone points it out. And it's S-ON
Ok, issue fixed! A proper RUU worked fine to reset my phone, all good! Still don't know what was the initial problem but now that it's solved I'm happy
the command to post your output is fastboot getvar all, remove serial and imei before posting.
after you have done that, stay in fastboot mode and type fastboot erase cache
the flash TWRP 2.6.3.3 and see if you can get into it.
once in goto - wipe - advanced wipe and select everything in the list, including internal memory and format the whole phone.
you will then have to push a rom of your choice and flash it.
Seanie280672 said:
the command to post your output is fastboot getvar all, remove serial and imei before posting.
after you have done that, stay in fastboot mode and type fastboot erase cache
the flash TWRP 2.6.3.3 and see if you can get into it.
once in goto - wipe - advanced wipe and select everything in the list, including internal memory and format the whole phone.
you will then have to push a rom of your choice and flash it.
Click to expand...
Click to collapse
Output:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.661.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4093mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Erasing cache:
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.065s]
finished. total time: 0.066s
Installing recovery:
target reported max download size of 1514139648 bytes
sending 'recovery' (10854 KB)...
OKAY [ 1.692s]
writing 'recovery'...
OKAY [ 0.752s]
finished. total time: 2.445s
But it's stuck before getting to recovery. "Entering recovery" won't go away...
ok, you could try this, relock bootloader and run the official RUU download here:
http://www.htc1guru.com/dld/ruu_m7_ul_k44_sense55_mr_telus_wwe_4-19-661-8_r_radio_4t-24-3218-09_10-26-1718-01l_release_351500_signed_2-exe/
It doesn't work. windows will give me an error and ask to debug the RUU. Not sure if that's my computer or the executable...
memyselfand06 said:
It doesn't work. windows will give me an error and ask to debug the RUU. Not sure if that's my computer or the executable...
Click to expand...
Click to collapse
can you check the file size of that RUU you downloaded please, in properties on your PC, it should be 1.5gb, ive just tried downloading it myself and it says completed but its only 148mb, when I tried to run it I go a similar error to what you are getting, just means there is a problem with the site at the moment and will be fixed shortly, you'll have to wait until then to grab the file, just keep trying until you get the full file size.
Last time this happened to this site a few weeks back, he said some hacker in Canada was sending a back door reset to his site every few minutes.
---------- Post added at 06:16 PM ---------- Previous post was at 06:09 PM ----------
found another download site with the same file that you can try and grab it from instead: http://androidruu.com/getdownload.php?file=M7/RUU_M7_UL_K44_SENSE55_MR_TELUS_WWE_4.19.661.8_R_Radio_4T.24.3218.09_10.26.1718.01L_release_351500_signed_2.exe
Hmm. Mine has 750mb. I guess it's still no good.
But I still can't get into recovery ..
memyselfand06 said:
Hmm. Mine has 750mb. I guess it's still no good.
But I still can't get into recovery ..
Click to expand...
Click to collapse
you wont need recovery to flash an RUU, just relock your bootloader, plug your phone into the computer and run the RUU, and no that file is no good, that's why you are getting the error, although it says its complete, you only have 50% of it, delete it and try the other site linked below, androidruu.com
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_351500_signed_2.exe
Seanie280672 said:
you wont need recovery to flash an RUU, just relock your bootloader, plug your phone into the computer and run the RUU, and no that file is no good, that's why you are getting the error, although it says its complete, you only have 50% of it, delete it and try the other site linked below, androidruu.com
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_351500_signed_2.exe
Click to expand...
Click to collapse
Ok, thanks, I'll redownload the file. Will it restore stock recovery as well? I got all this mess because I wanted to install an OTA update for HTC sense 6.0 and everything that came with it and I think I need stock recovery in order to install official updates...
memyselfand06 said:
Ok, thanks, I'll redownload the file. Will it restore stock recovery as well? I got all this mess because I wanted to install an OTA update for HTC sense 6.0 and everything that came with it and I think I need stock recovery in order to install official updates...
Click to expand...
Click to collapse
It should put you back to full stock
Great! I'll let you know what's the result
Thanks for your time
memyselfand06 said:
Great! I'll let you know what's the result
Thanks for your time
Click to expand...
Click to collapse
install TWRP
Try format data partition first it will remove mount data error
from HTC One
yatindroid said:
install TWRP
Try format data partition first it will remove mount data error
from HTC One
Click to expand...
Click to collapse
But I can't get into recovery, how am I suppose to do that?
memyselfand06 said:
But I can't get into recovery, how am I suppose to do that?
Click to expand...
Click to collapse
flash stock recovery
Boot loader » factory data reset
Sometimes it also clear issues
from HTC One
yatindroid said:
flash stock recovery
Boot loader » factory data reset
Sometimes it also clear issues
from HTC One
Click to expand...
Click to collapse
but I cant find a stock recovery either. I'm still waiting for the RUU to download and hopefully it will fix everything
memyselfand06 said:
but I cant find a stock recovery either. I'm still waiting for the RUU to download and hopefully it will fix everything
Click to expand...
Click to collapse
You can use Rom.zip from ruu
When you run ruu see temp folder in Windows it contains some long number named folder that contains rom.zip
flash that zip in fastboot
from HTC One
Hi Guys
i think i really messed up my HTC one first of all here's the screen details on the boot loader
and I'm a complete noobie on android and this is phone is my frist android device
****UNLOCKED****
M7_UL PVT SHIP S-OFF RH
CID-HTC__044
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Apr 25 2014
PC: Windows 7 Ultimate
The story is I tried to root my device using this tutorial in youtube from zedomax
and it was a success without trouble,
So I tried to install a custom ROM ViperOne_6.2.0.zip
and its where everything got messed up when the installation returned an error during installation
I tried reinstalling and i think i wiped all the data on the storage including the backup using the TWRP wipe button including OS files
after several attempts i was able to re enter TWRP and/or CWP trying to install via Sideload command but failed
i cant load zip files via my PC too because my pc cant read/write the storage of my phone. (I installed USB drivers and phone is detectable on device manager)
now the bootloader have this error Active cmdline overflow! (1094 Bytes)
Since I'm a real newbie in android may I kindly ask a step-by-step instruction on how can i recover if possible from this trouble.
I would really appreciate everyone's help from this forum.
here's a guide to fix that active cmdline overflow, you messed up one of your partitions and your phone wont work until you fix that issue, you need to follow that guide to the letter, do not skip any parts, read it all first and understand it, if you get any of the commands wrong you could end up with a complete brick so copy and paste them.
http://forum.xda-developers.com/showthread.php?t=2739126
Thank you for the quick reply,
I tried to install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly
when I erased cache then rebooted the fast booth, the "Active cmdline overflow! (**** Bytes)" error was gone
but when i enter recovery, it reboots again to fastboot and the error reappears.
and the cycle repeats again.
I can't get past this
one more thing...I noticed that you used a different adb C:\ADB3> is there a version 3 or is it just a folder name?
when I try to detect device in fastboot:
D:\HTCOne recover\HTCOneRoot>fastboot devices
FA32GW9**** fastboot
but when i try to use the same command on adb:
D:\HTCOne recover\HTCOneRoot>adb devices
List of devices attached
nothing on the list. And ADB commands don't work because it can't recognize the device.
I really need your help. Thanks in Advance
I would like to add that I can't access the phone storage through my PC
one more thing...
how would I know if i got these?
from the guide
"Well you need adb commands, root and busybox... which are only available in a custom recovery or a rooted ROM (with USB debugging enabled)"
1. adb commands
2. root and
3. busybox
4. custom recovery or a rooted ROM (with USB debugging enabled)
which are only available in a custom recovery or a rooted ROM (with USB debugging enabled)"
WilmanB said:
Thank you for the quick reply,
I tried to install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly
when I erased cache then rebooted the fast booth, the "Active cmdline overflow! (**** Bytes)" error was gone
but when i enter recovery, it reboots again to fastboot and the error reappears.
and the cycle repeats again.
I can't get past this
one more thing...I noticed that you used a different adb C:\ADB3> is there a version 3 or is it just a folder name?
Click to expand...
Click to collapse
have you restored mmcblk0p19 like said in the guide?
but when i try to use the same command on adb:
D:\HTCOne recover\HTCOneRoot>adb devices
List of devices attached
nothing on the list.
and ADB commands don't work because it can't recognize the device.
I really need your help. Thanks in Advance
I would like to add that I can't access the phone storage through my PC
Click to expand...
Click to collapse
adb only works from custom recovery or from a booted rom with usb debug on. adb will not works from bootloader and you will not see phone storage from bootloader.
alray said:
have you restored mmcblk0p19 like said in the guide?
Click to expand...
Click to collapse
but adb does not recognize my phone so i cant restore mmcblk0p1 like it says on the instruction
adb wont respond to any adb commands
but fastboot is responsive
"adb only works from custom recovery or from a booted rom with usb debug on."
how do i do this? How will I know if I'm running in a booted ROM with USB debug On?
I install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly but it wont enter recovery mode
First of all you will know if you are running a booted Rom if your phone boots up lol, in your case, yours doesn't, so ignore this and usb debugging.
Fastboot commands only work in bootloader.
Adb commands for you will only work inside recovery.
You must get into recovery to use adb to fix your phone, the reason you apprear to not be able to get in is because of your hboot version, you need to downgrade it, however I leave this completely in your hands and won't be held responsible if you brick your phone, simply, if you flash even the slightest wrong hboot, you'll have a brick, read the rest of that thread after the instructions, your same issue is in that thread.
WilmanB said:
but adb does not recognize my phone so i cant restore mmcblk0p1 like it says on the instruction
adb wont respond to any adb commands
but fastboot is responsive
Click to expand...
Click to collapse
ADB commands = Usable from custom recovery mode or from a normally booted phone (not your case)
FASTBOOT commands = Usable only from bootloader, where you currently are. You can't use adb here
"adb only works from custom recovery or from a booted rom with usb debug on."
how do i do this? How will I know if I'm running in a booted ROM with USB debug On?
Click to expand...
Click to collapse
flash the nobcb verison of twrp, boot in recovery and then you'll be able to use ADB commands.
I install "fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img" on fastboot. It installed correctly but it wont enter recovery mode
Click to expand...
Click to collapse
Code:
fastboot flash recovery twrp-recovery-2.7-m7-nobcb.img
fastboot erase cache
fastboot reboot-bootloader
then try to boot in recovery mode again.
if you are still not able to boot the nobcb recovery, better to ask in the thread Seanie280672 linked you
Wow, thank you all very much. I am now able to enter recovery mode using HBOOT -1.44.0000 through CWT recovery
no more cmdline overflow.
and I'm done restoring mmcblk0p19
now i just need to find the correct RUU to flash I need your help again guys? I'm not really sure what RUU to flash or what to do next from here
WilmanB said:
Wow, thank you all very much. I am now able to enter recovery mode using HBOOT -1.44.0000 through CWT recovery
no more cmdline overflow.
and I'm done restoring mmcblk0p19
now i just need to find the correct RUU to flash I need your help again guys? I'm not really sure what RUU to flash or what to do next from here
Click to expand...
Click to collapse
post the output of "fastboot getvar all" excluding imei and serialno and we'll be able to tell you what ruu you can use.
alray said:
post the output of "fastboot getvar all" excluding imei and serialno and we'll be able to tell you what ruu you can use.
Click to expand...
Click to collapse
@elray
Thanks for replying these are what i got from the getvar command
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.707.1
version-misc: PVT SHIP S-OFF
serialno: FA32GW9*****
imei: 3558590500*****
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: HTC__044
battery-status: good
battery-voltage: 4318mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
I wish you can locate a proper RUU for my device.
I would also like to ask if it is possible to install custom ROM on my phone.
I tried to install the ViperOne 6.2.0 and Android Revolution HD 71.1 but it's both unsuccessful
now I'm stuck on Android 4.2.2 in HTC Sense 5 because i can't install new updates to KitKat and Sense 6
WilmanB said:
@elray
Thanks for replying these are what i got from the getvar command
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4A.17.3250.14
version-cpld: None
version-microp: None
version-main: 2.24.707.1
version-misc: PVT SHIP S-OFF
serialno: FA32GW9*****
imei: 3558590500*****
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0714000
cidnum: HTC__044
battery-status: good
battery-voltage: 4318mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-d16dc66985
hbootpreupdate: 11
gencheckpt: 0
I wish you can locate a proper RUU for my device.
I would also like to ask if it is possible to install custom ROM on my phone.
I tried to install the ViperOne 6.2.0 and Android Revolution HD 71.1 but it's both unsuccessful
now I'm stuck on Android 4.2.2 in HTC Sense 5 because i can't install new updates to KitKat and Sense 6
Click to expand...
Click to collapse
http://www.htc1guru.com/dld/ruu-zip-m7_u_asia_wwe_custom_guruu_3-63-707-4-zip/
or any other ruu if you change your mid/cid
alray said:
http://www.htc1guru.com/dld/ruu-zip-m7_u_asia_wwe_custom_guruu_3-63-707-4-zip/
or any other ruu if you change your mid/cid
Click to expand...
Click to collapse
Sorry @alray but the file in your link returned an error while flashing
3x to flash without rebooting, returned this error:
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.103s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.549s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.183s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.610s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.112s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.540s
D:\HTCOne recover\HTCOneRoot>fastboot reboot
rebooting...
finished. total time: 0.038s
I think the RUU file is incompatible with my device that's why it wont proceed.
this is the filename:
RUU Zip M7_U_Asia_WWE_Custom_GuRUU_3.63.707.4.zip
Android.txt
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
mainver: 3.63.707.4
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
WilmanB said:
Sorry @alray but the file in your link returned an error while flashing
3x to flash without rebooting, returned this error:
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.103s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.549s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.183s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.610s
D:\HTCOne recover\HTCOneRoot>fastboot flash zip RUU.zip
sending 'zip' (1206124 KB)...
OKAY [ 46.112s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 46.540s
D:\HTCOne recover\HTCOneRoot>fastboot reboot
rebooting...
finished. total time: 0.038s
I think the RUU file is incompatible with my device that's why it wont proceed.
this is the filename:
RUU Zip M7_U_Asia_WWE_Custom_GuRUU_3.63.707.4.zip
Android.txt
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
mainver: 3.63.707.4
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
Click to expand...
Click to collapse
was your phone in ruu mode?
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
alray said:
was your phone in ruu mode?
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
Click to expand...
Click to collapse
yes sir it was in ruu mode. the one with green HTC logo and black background.
WilmanB said:
yes sir it was in ruu mode. the one with green HTC logo and black background.
Click to expand...
Click to collapse
try this one: http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
otherwise, change your mid and cid and try to flash another version ruu.
hello,
so i recently accidentally removed my android OS from my htc one (m7) and the backup i took , and now im stuck with a bricked phone.
it is still unlocked , S-on however and i have the Twrp custom recovery.
I have the stock RUU for my phone but i can't use ADB push command to forward it to my phone.
It might be because my usb debugging is off ( probably not ) but i cant open my phone , it keeps stuck at the bootscreen.
i also couldnt flash it with fasboot flash zip command.
If anyone could help me out with this, i would be so happy.
Thanks in advance
angizwa said:
hello,
so i recently accidentally removed my android OS from my htc one (m7) and the backup i took , and now im stuck with a bricked phone.
it is still unlocked , S-on however and i have the Twrp custom recovery.
I have the stock RUU for my phone but i can't use ADB push command to forward it to my phone.
It might be because my usb debugging is off ( probably not ) but i cant open my phone , it keeps stuck at the bootscreen.
i also couldnt flash it with fasboot flash zip command.
If anyone could help me out with this, i would be so happy.
Thanks in advance
Click to expand...
Click to collapse
What RUU are you trying to flash? Here is alray's procedure for your situation. You might want to check the prerequisites on installed drivers. Also, is there a RUU.exe file to use instead of a zip file?
If these procedures don't work, then post a fastboot getvar all except for the imei and serialno.
@majmoz
The ruu im using is a zip ( i used it before and it works, ) its the guru reset M7 3.62.401.1, my drivers work too , it recognizes my phone when plugged into my pc
here is my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4070mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.165s
angizwa said:
@majmoz
The ruu im using is a zip ( i used it before and it works, ) its the guru reset M7 3.62.401.1, my drivers work too , it recognizes my phone when plugged into my pc
here is my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4070mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.165s
Click to expand...
Click to collapse
angizwa said:
hello,
so i recently accidentally removed my android OS from my htc one (m7) and the backup i took , and now im stuck with a bricked phone.
it is still unlocked , S-on however and i have the Twrp custom recovery.
I have the stock RUU for my phone but i can't use ADB push command to forward it to my phone.
It might be because my usb debugging is off ( probably not ) but i cant open my phone , it keeps stuck at the bootscreen.
i also couldnt flash it with fasboot flash zip command.
If anyone could help me out with this, i would be so happy.
Thanks in advance
Click to expand...
Click to collapse
guru reset M7 3.62.401.1 is not a RUU, its a ROM (stock rom) and must be installed using a custom recovery, not using "fastboot flash zip" command which is only used to flash RUU.zip or Firmware.zip
However, 3.62.401.1 is no longer the version you need (your hboot is 1.57) so you probably need the 5.11.401.10 or 6.09.401.5 rom.
Also usb debugging have nothing to do with using adb from custom recovery, its only to enable adb when booted in the OS.
make sure to use twrp 2.6.3.3 with latest adb 1.0.31 and latest htc drivers installed and push the correct stock rom to your phone using adb push or sideload.
@alray
oohh okay thanks, ill get that twrp, but do i have to change twrp version ? mine is 2.7-something, i'll download the correct ruu... i feel so stupid right now thanks, i really hope this works
angizwa said:
@alray
oohh okay thanks, ill get that twrp, but do i have to change twrp version ? mine is 2.7-something, i'll download the correct ruu... i feel so stupid right now thanks, i really hope this works
Click to expand...
Click to collapse
There is no RUU you can flash for that version with s-on. Find a stock rom for your version. And better to use twrp 2.6.3.3
Sent from my HTC One using XDA Free mobile app
you can sideload a rom through adb while you're in twrp super easy and fast
@alray
oh okay ill look for a stock rom then
@2B_4G10
i know i tried sideload and push, but for some reason ADB doesnt want to work
i typed adb devices in command and it did show an empty list, no idea why...
hmm i tried flashing the stock rom,
i got this error
http://i.imgur.com/XzOOJYE.jpg
what does this mean ?
oh and after relocking, it gave me a signature check (remote : 12 ) fail... :/
angizwa said:
hmm i tried flashing the stock rom,
i got this error
http://i.imgur.com/XzOOJYE.jpg
what does this mean ?
oh and after relocking, it gave me a signature check (remote : 12 ) fail... :/
Click to expand...
Click to collapse
look back at post #4, already explained why
@alray
oh... so its not a stock rom ? adb doesnt work on my device anymore... adb devices gives me an empty list...
and i cant flash the other TWRP version ... it gives me this problem :
target reported max download size of 1514139648 bytes
sending 'customrecovery' (10854 KB)...
OKAY [ 1.767s]
writing 'customrecovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.709s
angizwa said:
@alray
oh... so its not a stock rom ?
Click to expand...
Click to collapse
Only RUU (Rom Update Utility) can be flashed with fastboot flash zip commands, not ROM even if the rom is a STOCK rom. RUUs and ROMS are 2 differents things. The RUU is a package containing the system(ROM), kernel, radio, bootloader, touch screen drivers and much more. It must be signed with HTC encrypted key to be flashed using "fastboot flash zip"
A ROM is a package including the system (/system) and the kernel (boot.img) and MUST be flashed from custom recovery, even if its a stock rom (like a guru reset rom or a stock odexed rom)
adb doesnt work on my device anymore... adb devices gives me an empty list...
Click to expand...
Click to collapse
Probably because your drivers are not installed correctly. this can be verified from Windows device manager. When the phone is booted in recovery, check that the phone is listed as a "android ADB interface".
and i cant flash the other TWRP version ... it gives me this problem :
target reported max download size of 1514139648 bytes
sending 'customrecovery' (10854 KB)...
OKAY [ 1.767s]
writing 'customrecovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.709s
Click to expand...
Click to collapse
FAILED (remote: signature verify fail) = Locked or Relocked bootloader, you must have an unlocked bootloader to flash recovery.
@angizwa follow procedure linked at post #2
nope, no android ADB in my driver list when in recovery oO , but i can see android usb devices when in fastboot... i guess i have the wrong drivers... ill see if i can find them, i really hope that was the problem oO
angizwa said:
hmm i tried flashing the stock rom,
i got this error
http://i.imgur.com/XzOOJYE.jpg
what does this mean ?
oh and after relocking, it gave me a signature check (remote : 12 ) fail... :/
Click to expand...
Click to collapse
you flash roms with custom recovery (TWRP) not with fastboot. Why did you relock the bootloader ? unlock it reflash TWRP 2.6.3.3 then sideload / Push the rom
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
@clsA
yes i tried sideload before, but as i said, my adb doesnt work... adb devices does show me an empty list ...
angizwa said:
@clsA
yes i tried sideload before, but as i said, my adb doesnt work... adb devices does show me an empty list ...
Click to expand...
Click to collapse
Then you need to fix your drivers
see post 2 of the superguide
http://forum.xda-developers.com/showthread.php?t=2541082
@clsA
ok thanks, ill try fixing them
Hello,
Okay so I had an HTC one that was stuck on the boot screen. Well I had a feeling it was rooted but was not sure because clorkworkmod always said boot with "root access" which I ignored. So first off I found something called guru reset 2.24.401.8 which was my version of my phone. So I used adb side load to move to my device then installed it. It worked fine and I was excited however it booted to a black screen with only the battery status, reception meter, and time bar. When I tried using recovery again the phone would show a green sign and then a red exclamation mark sign. I tried for so long going into recovery, but to no avail. I used fast boot to flash recovery and erase cache but did not work. I am terribly stuck and need help.
MIDN0710000
Version:2.24.401.8
Please help a brother in need.
Thank you
Sorry for any mistake wrote this really late.
kobster98 said:
Hello,
Okay so I had an HTC that was stuck on the boot screen. Well I had a feeling it was rooted but was not sure because clorkworkmod always say boot with "root access" which I ignored. So first off I found something called guru reset 2.24.401.8 which was my version of my phone. So I use adb side load to move to my device then install it. It worked fine and I was excited however it booted a black screen with only the battery status reception meter and time. When I tried using recovery again the phone would show a green sign and then a red exclamation mark sign. I tried for so long going in recovery to no avail. I use fast boot to flash recovery and erase cache but did not work. I am terribly stuck and need help.
MIDN0710000
Version:2.24.401.8
Please help a brother in need.
Thank you
Sorry for any mistake wrote this really late.
Click to expand...
Click to collapse
When you flashed the Guru Reset you must have selected "stock recovery" because that is the black screen with green or red triangle. Follow these steps:
Get TWRP 2.6.3.3 from: http://techerrata.com/browse/twrp2/m7
(make sure MD5 is correct, that site does not play nice with download managers)
in bootloader/FASTBOOT USB:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Thanks
I have been able to do it and thank you, but i am having issue with adb my fastboot work and is able to find my devices but adb does not.
kobster98 said:
I have been able to do it and thank you, but i am having issue with adb my fastboot work and is able to find my devices but adb does not.
Click to expand...
Click to collapse
ADB works in OS/Android with USB Debugging enabled in Developer Options and in Recovery Mode. It will not work if the phone is in bootloader/FASTBOOT USB.
About to give up
Okay you have been great help, and i need major help i have tried every thing, my phone doesn't boot up properly and just has a black screen, i have tried using guru reset 2.24.401.8 to reset and it doesnt work, i tried with an unlocked bootloader, but with S-On and i read an article saying guru reset should work regardless if it is s-on or s-off. im not sure though. I am not stuck because my phone Hboot is 1.54 and i have tried using rumrunner but doesnt work because my adb only work in recovery. I would like to S-off my phone to be able to install the guru reset. rom. I have tried using RUU's but cant find my radio version. is there any possible way to S-off my phone without an OS to install unto. Or is there any way to re-install my OS i am running out of ideas. Thank you very much!!
kobster98 said:
Okay you have been great help, and i need major help i have tried every thing, my phone doesn't boot up properly and just has a black screen, i have tried using guru reset 2.24.401.8 to reset and it doesnt work, i tried with an unlocked bootloader, but with S-On and i read an article saying guru reset should work regardless if it is s-on or s-off. im not sure though. I am not stuck because my phone Hboot is 1.54 and i have tried using rumrunner but doesnt work because my adb only work in recovery. I would like to S-off my phone to be able to install the guru reset. rom. I have tried using RUU's but cant find my radio version. is there any possible way to S-off my phone without an OS to install unto. Or is there any way to re-install my OS i am running out of ideas. Thank you very much!!
Click to expand...
Click to collapse
There is no way to s-off without a Rom on the phone.
You can push a Rom to the phone using adb in recovery. Which recovery are you using. You should use TWRP 2.6.3.3 to avoid any problems installing the Guru Reset Rom.
Put the Rom in your adb/fastboot folder and rename it to rom.zip. Connect adb in recovery and in the command window type.
Code:
adb push rom.zip /sdcard
The command window will appear unresponsive until the push completes several minutes. When it's done install the Rom with twrp recovery.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
rom install
i tried and installed a guru reset rom,however when i installed it just boots to a plain blackscreen with only the battery status, time, and reception bar showing, yes i am using twrp 2.6.3.3.
thank you for reply
kobster98 said:
i tried and installed a guru reset rom,however when i installed it just boots to a plain blackscreen with only the battery status, time, and reception bar showing, yes i am using twrp 2.6.3.3.
thank you for reply
Click to expand...
Click to collapse
Did you install the reset Rom with Twrp 2.6.3.3 your first post indicates you used CWM
Can you please post the out put from
Code:
fastboot getvar all
Please remove imei and serial numbers before posting.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Help
Thanks,
Yea i have twrp 2..6.3.3 installed as recovery, i did have clorkworkmod previously but guru reset wiped my data after installation. So i switched to twrp recovery. What Rom or RUU should i install?
Thanks for your time. Info you need is below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
kobster98 said:
Thanks,
Yea i have twrp 2..6.3.3 installed as recovery, i did have clorkworkmod previously but guru reset wiped my data after installation. So i switched to twrp recovery. What Rom or RUU should i install?
Thanks for your time.
Info you need is below.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Here is the only RUU I could find that is a higher version than yours. There have been people who have bricked their phone by jumping version so I have provide the firmware for the version from 2.24.401.8 to RUU 4.19.401.9.
Firmware 3.62.401.1
Firmware 4.19.401.8
RUU 4.19.401.9
To flash the firmware, place the firmware in your adb/fastboot folder, open a command window in your adb/fastboot folder:
Code:
[B][I]adb reboot bootloader[/I][/B]
After that, type:
Code:
fastboot oem lock
Type:
Code:
[B][I]fastboot oem rebootRUU [/I][/B]
NOTE: You should see a silver HTC logo come up on your phone after executing this command.
NOTE: if this command freezes, just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
Finally:
Code:
[B][I]fastboot flash zip [COLOR="Purple"]name_of_firmware.zip[/COLOR][/I][/B]
Repeat the same command: IMPORTANT
Code:
[B][I]fastboot flash zip [COLOR="Purple"]name_of_firmware.zip[/COLOR][/I][/B]
NOTE: The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.
Last Step:
Code:
[B][I]fastboot reboot-bootloader[/I][/B]
Click to expand...
Click to collapse
After the last firmware reboots, then run the RUU.
Follow @majmoz instructions, but for the record the RUU should work fine after flashing 3.62.401.1 firmware. As the RUU will contain the full firmware up to 4.19.401.9. So no risk of firmware mismatch.
majmoz said:
Here is the only RUU I could find that is a higher version than yours. There have been people who have bricked their phone by jumping version so I have provide the firmware for the version from 2.24.401.8 to RUU 4.19.401.9.
Firmware 3.62.401.1
Firmware 4.19.401.8
RUU 4.19.401.9
To flash the firmware, place the firmware in your adb/fastboot folder, open a command window in your adb/fastboot folder:
After the last firmware reboots, then run the RUU.
Click to expand...
Click to collapse
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Thanks
So i should use the 4.19.401.9 RUU, but why am i locking the bootloader, doesnt it need to be unlocked. I will try your process. I am very grateful.
kobster98 said:
So i should use the 4.19.401.9 RUU, but why am i locking the bootloader, doesnt it need to be unlocked. I will try your process. I am very grateful.
Click to expand...
Click to collapse
Flash the 3.62.401.1 firmware as per majmoz instructions. Then you can use the RUU to update your phone to kit Kat.
You have to be unlocked to flash Custom software. But the RUU and Firmware are signed Stock files. Because your s-on you must be relocked to flash them
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Thanks
okay so i tried running the steps but my phone did not reboot once, and bootloader say successful, but i get an error.
Here:
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>Fastboot oem rebooutruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>fastboot flash zip 3.62.401.1_full_stock_sense_firmware.zip
sending 'zip' (97331 KB)...
OKAY [ 5.001s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 15.428s
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>fastboot flash zip 3.62.401.1_full_stock_sense_firmware.zip
sending 'zip' (97331 KB)...
OKAY [ 5.026s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 15.452s
kobster98 said:
okay so i tried running the steps but my phone did not reboot once, and bootloader say successful, but i get an error.
Here:
C:\Users\Family\Desktop\root\adt-bundle-windows-x86_64-20140702\sdk\platform-too
ls>Fastboot oem rebooutruu
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.002s]
finished. total time: 0.002s
Click to expand...
Click to collapse
Your command to rebootRUU is incorrect it is case sensitive. You also appear to have an extra "u" in there
Code:
fastboot oem rebootRUU
After this command your phone will reboot to a screen with a silver HTC logo. This is RUU mode
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Misunderstanding
Sorry but the problem is that i get Failed (remote:12 signature verify fail) and it does not flash says finished.
kobster98 said:
Sorry but the problem is that i get Failed (remote:12 signature verify fail) and it does not flash says finished.
Click to expand...
Click to collapse
Yes because your phone is not in ruu mode. You cannot flash the firmware in the bootloader.
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Misunderstanding
I am in RUU mode, its a black screen with the HTC logo, but when i type the command to flash the firmware it gives me "failed: 12 signature verify"
kobster98 said:
I am in RUU mode, its a black screen with the HTC logo, but when i type the command to flash the firmware it gives me "failed: 12 signature verify"
Click to expand...
Click to collapse
Ok strange, try this firmware zip instead http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/3.62.401.1.zip
Sent from my HTC One M7 - ARHD 82.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Thank you bro it worked your a life saver