I installed the TWRP recovery tool on my phone through odin, pretty much following the standard instructions everywhere. (Download mode->odin->PDA->tar file->start) however, now my phone is not rebooting at all; it is stuck on the screen displaying 'Samsung Galaxy S Advance' for over 30 minutes. I'd be extremely grateful for any assistance on how to fix this issue. :fingers-crossed:
1.What system do you have (2.3.6 or 4.1.2) ?
2.Do you have root ?
3.Can you enter recovery or download mod ?
4.Do you have I9070 or I9070P ?
Sent from my GT-I9070P using xda app-developers app
RE:
MikiGry said:
1.What system do you have (2.3.6 or 4.1.2) ?
2.Do you have root ?
3.Can you enter recovery or download mod ?
4.Do you have I9070 or I9070P ?
Sent from my GT-I9070P using xda app-developers app
Click to expand...
Click to collapse
1. 4.1.2
2. yes
3. not recovery, but download mode, yes, after replacing the battery
4. I9070
1.Odin flashnable TWRP was only for gingerbread.
If you want costom recovery go to CoCore thread.
2.Go to download mod and flash stock jellybean.
After that your phone will boot.
3.Dont worry. Uf you can enter download mod your phone is not bricked.
Wysłane z mojego GT-I9070P przy użyciu Tapatalka
n00bism
MikiGry said:
1.What system do you have (2.3.6 or 4.1.2) ?
2.Do you have root ?
3.Can you enter recovery or download mod ?
4.Do you have I9070 or I9070P ?
Sent from my GT-I9070P using xda app-developers app
Click to expand...
Click to collapse
I just saw your post on @diego-ch's thread saying that this is for gingerbread and not jellybean! Is that the problem? Is there any, any way to fix it now?
sda_n00b said:
I just saw your post on @diego-ch's thread saying that this is for gingerbread and not jellybean! Is that the problem? Is there any, any way to fix it now?
Click to expand...
Click to collapse
Just flash stock JB firmware with Odin again. And it will be fine.
Thanks
Yup! It worked! Thanks a lot!:good::laugh:
Related
hey ! i'm new in here !
i need help
i have galaxy mini s5570
the first time i installed CWM and update to a custom ROM
(without Root) and it's worked
and i made it back to an other stock rom JVKT1
and i rooted it and installed CWM
and when i want to install another custom ROM from CWM it got stuck at the boot image
and i want to restore the old one 'from cwm' it gor stuck too
so i managed to get to another one by Odin and worked :laugh:
is there any way to install Custom rom from odin
or i can fix the phone to install them from CWM
please help me ! i'm now at s5570XWKTN (PDA) / PHONE : s5570XWKT6 / (CSC) : s5570OXXKTB
from : http://forum.xda-developers.com/showthread.php?t=1551586
please help
the-bomber said:
hey ! i'm new in here !
i need help
i have galaxy mini s5570
the first time i installed CWM and update to a custom ROM
(without Root) and it's worked
and i made it back to an other stock rom JVKT1
and i rooted it and installed CWM
and when i want to install another custom ROM from CWM it got stuck at the boot image
and i want to restore the old one 'from cwm' it gor stuck too
so i managed to get to another one by Odin and worked :laugh:
is there any way to install Custom rom from odin
or i can fix the phone to install them from CWM
please help me ! i'm now at s5570XWKTN (PDA) / PHONE : s5570XWKT6 / (CSC) : s5570OXXKTB
from : http://forum.xda-developers.com/showthread.php?t=1551586
please help
Click to expand...
Click to collapse
Okay.... install cwm as before and wipe data and cache before and after flashing custom roms....
Sent from my GT-S5570 using xda premium
ashu.bigsmoke said:
Okay.... install cwm as before and wipe data and cache before and after flashing custom roms....
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
wow , it's working :victory: thanks dude
the-bomber said:
wow , it's working :victory: thanks dude
Click to expand...
Click to collapse
Don't say thanks.... there's a button for it.... press it.....
Sent from my GT-S5570 using xda premium
actually you don't need to wipe after installation (unless stated otherwise in roms instructions) i never do and so far i didn't have any problems
yackovsky said:
actually you don't need to wipe after installation (unless stated otherwise in roms instructions) i never do and so far i didn't have any problems
Click to expand...
Click to collapse
It acts as a safeguard against bootloops after flashing custom roms.... and in most of it it's written....
Sent from my GT-S5570 using xda premium
almost of the time wiping is needed after installation (specifically for sgm)
dheeraj (dhlalit11) said:
almost of the time wiping is needed after installation (specifically for sgm)
Click to expand...
Click to collapse
yes you need to wipe
hi all,
can anyone help and send me here pls to root my latest 4.1.2 original stock firmware I8190XXAMB4 (turkey) with cwm???
thanx alot.
Download this, and flash in CWM, update SuperSU as well, see below : http://d-h.st/ook
Download SuperSU here, flash also in CWM : http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip
Sent from my GT-I8190 using xda premium
scaliskano said:
hi all,
can anyone help and send me here pls to root my latest 4.1.2 original stock firmware I8190XXAMB4 (turkey) with cwm???
thanx alot.
Click to expand...
Click to collapse
I8190XXAMB4_I8190OJVAMB3_HOME.tar.md5
root necessary helper..?
I tried this solution, my s3 mini gave this problem..."signification problem"
what can ı do?
Hi,
can I use this recovery http://forum.xda-developers.com/showthread.php?t=1987313 for my GT-I9070P (NFC version)?
and can I then use it for flashing CoCore EP 6.8b - TWRP ?
Or could I skip the temporary CWM and flash only CoCore EP 6.8b - TWRP with frapeti's kernel flash tool?
Thx for your answers
pnuda said:
Hi,
can I use this recovery http://forum.xda-developers.com/showthread.php?t=1987313 for my GT-I9070P (NFC version)?
and can I then use it for flashing CoCore EP 6.8b - TWRP ?
Or could I skip the temporary CWM and flash only CoCore EP 6.8b - TWRP with frapeti's kernel flash tool?
Thx for your answers
Click to expand...
Click to collapse
You can do what you prefer. It's better flashing cwm first instead using universal kernel flasher because flashing the kernel in recovery installs modules too
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
You can do what you prefer. It's better flashing cwm first instead using universal kernel flasher because flashing the kernel in recovery installs modules too
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
OK thx I'll flash CWM...hope it won't brick my phone (cause in the thread there isn't written anything about I9070P only I9070...so I hope it will work
pnuda said:
OK thx I'll flash CWM...hope it won't brick my phone (cause in the thread there isn't written anything about I9070P only I9070...so I hope it will work
Click to expand...
Click to collapse
It won't brick and it works on I9070P too
Sent from my GT-I9070 using Tapatalk 4 Beta
KINGbabasula said:
It won't brick and it works on I9070P too
Sent from my GT-I9070 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thank you now I'm finally decided to do it
cocore 6.8 + twrp for i9070
can u pls provide a link for cocore 6.8 + twrp for i9070 NOT I9070P
Secondly should i first make a backup using temp cwm and then flash cocore so that if anything goes wrong i can restore
hallebaaz said:
can u pls provide a link for cocore 6.8 + twrp for i9070 NOT I9070P
Secondly should i first make a backup using temp cwm and then flash cocore so that if anything goes wrong i can restore
Click to expand...
Click to collapse
Less unusefull threads/posts - more searching. Look in thread you created. :silly:
today i flash indian stock firmware on my note but it stucks on logo.......plz help me...
kevalthakkar said:
plz help me...
Click to expand...
Click to collapse
Not possible if you do not provide more details what you did (new device? what Rom? how did you install? etc).
ThaiDai said:
Not possible if you do not provide more details what you did (new device? what Rom? how did you install? etc).
Click to expand...
Click to collapse
I m using aryamod v 5.5 i want to go to service centre so i flash stock firmware but it stucks on logo....
Sent from my GT-S7562 using XDA Premium HD app
kevalthakkar said:
I m using aryamod v 5.5 i want to go to service centre so i flash stock firmware but it stucks on logo....
Sent from my GT-S7562 using XDA Premium HD app
Click to expand...
Click to collapse
Last try: what stock rom and how did you install it?
download the latest odin and the ddlsc stock rom first
u are saying u r on aryamod rom,it has a safe recovery wipe the system and dalvik cache
and flash ddlsc using odin
if the phone still stuck at logo then do a factory data reset using the recovery(stock recovery -after flashing ddlsc)
How To Root Marshmallow
Steps Of Root
1.Download Custom Kernel
2.Flash Kernel Through Recovery
3.Flash Super Su.zip
Kernel:-https://www.androidfilehost.com/?fid=24052804347831834
Super Su:- https://www.androidfilehost.com/?fid=24052804347833559
Still i cant remove google bloatware. Why?
Wysłane z mojego Sparkle V przy użyciu Tapatalka
Root It And Remove It
?
Has anyone tried supersu beta 2.52?
Sent from my Micromax AQ4501 using XDA Free mobile app
I Don't Know About That But My Zip Working Fine
Sent from my Sparkle V using XDA Free mobile app
manu.uddeshy said:
Has anyone tried supersu beta 2.52?
Sent from my Micromax AQ4501 using XDA Free mobile app
Click to expand...
Click to collapse
I'm getting contant bootloops but need more people to confirm.
@Night Runner Is it a modified stock kernel just to allow rooting (Permissive) or are there any other changes too?
Dude when I have flash the android then custom recovery was change with the stock recovery so I can't flash the kernal tell me how to install recovery first...
Sent from my Micromax AQ4501 using XDA Forums
It's working fine with me.
Sent from my Micromax AQ4501 using XDA Free mobile app
ngr.hd said:
@Night Runner Is it a modified stock kernel just to allow rooting (Permissive) or are there any other changes too?
Click to expand...
Click to collapse
Idk May Be We Need Custom One
manishsarkar2017 said:
Dude when I have flash the android then custom recovery was change with the stock recovery so I can't flash the kernal tell me how to install recovery first...
Sent from my Micromax AQ4501 using XDA Forums
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=xST-wpje-qw&ab_channel=KishanMahadevwala
You Should Follow This Video
manishsarkar2017 said:
Dude when I have flash the android then custom recovery was change with the stock recovery so I can't flash the kernal tell me how to install recovery first...
Sent from my Micromax AQ4501 using XDA Forums
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=xST-wpje-qw&ab_channel=KishanMahadevwala
Follow This Video
Can you please upload step-by-step procedure how to root micromax android one running on marshmallow 6.0
Thanks
dongamk said:
Can you please upload step-by-step procedure how to root micromax android one running on marshmallow 6.0
Thanks
Click to expand...
Click to collapse
Its Damn Easy Follow My Steps
elaborate pls
Brother do we need custom recovery installed like twrp ?
Or we can flash both with stock recovery ?
TheMartinCodex said:
Brother do we need custom recovery installed like twrp ?
Or we can flash both with stock recovery ?
Click to expand...
Click to collapse
Yes,You Want Custom Recovery For Flash Both Zip
You Confuse How To Install Custom Recovery See This Video
Still on STOCK Recovery
Night Runner said:
Yes,You Want Custom Recovery For Flash Both Zip
You Confuse How To Install Custom Recovery See This Video
Click to expand...
Click to collapse
I tried everything given in the video and all commands worked, but when I went into the recovery, it was still a STOCK recovery!
@Saurabh_MUFC said:
I tried everything given in the video and all commands worked, but when I went into the recovery, it was still a STOCK recovery!
Click to expand...
Click to collapse
Okay So Now You Flash Recovery Through Sp Tool
1.Open Sp Tool
2.Put Custom Recovery In Folder
3.Select Scatter Files
4.Now Untick Everything Except Recovery
5.Flash
Now You On Custom Recovery
this method works on my sprout8.
Night Runner said:
How To Root Marshmallow
Steps Of Root
1.Download Custom Kernel
2.Flash Kernel Through Recovery
3.Flash Super Su.zip
Kernel:-https://www.androidfilehost.com/?fid=24052804347831834
Super Su:- https://www.androidfilehost.com/?fid=24052804347833559
Click to expand...
Click to collapse
@Night Runner can you help me to clarify my queries regarding rooting the same??
1.Won't i be able to root through stock recovery??
2. What is the difference between stock and custom recovery as a novice in such.. And how does it affect my device??
3. How will i use ur above files to root mine?
And finally,
4. Help in a step-by-step ways to remove the bloatware from my device.
I would be especially grateful to you for your kind help to a novice like me.. Please!!