[Q] Droid 4 Stopped responding to touch input - Motorola Droid 4

A month ago I ended a call with Verizon custotmer service only to find the touchscreen on my D4 had stopped working. There was no ghosting, no other problems I knew of at the time besides a speaker that wouldn't work. Rebooting didn't work. Factory reset didn't work. The only thing different was that the phone had recently upgraded to Jellybean. Now when the phone is rebooted the WiFi automatically comes on. I could still use it attached to the lap dock, or by using the keyboard to bypass the touchscreen. I switched to my backup phone and searched for answers.
I ended up getting a new-to-me D4 from eBay. I took the slider half of the phone with the screen and switched the whole thing to my D4. Phone
was fixed, seemed to be fine.
Today rooted my phone. All was well until I was playing a game, then again the touchscreen just stopped working. I am at an utter loss, what happened to the touchscreen? Neither one was dropped, both had screen protectors on and were in cases. I was using the phone at the time both times. The picture is clear, screen uncracked. I just can't get it to accept touch input anywhere on the screen. And the WiFi is turning on again when I restart the phone.
I have never seen this happen before on any other phone, I have heated the glass and pressed where the flex cable is in case of a loose connection, nothing happens. Removing the sim and SD cards didn't help either. Any suggestions or fixes? Will replacing the glass again fix it, or should I try a factory reset again? Stock ROM, rooted jellybean, using atrix lap dock to type this.

Related

Tilt no longer enjoys being touched.

So, i'm usually quiet on these forums. Just reading, trying roms, etc. But here is something that has me stumped. Last thursday my phone crapped out. When i woke up and looked at it (it was connected to my laptop/charging) Applications were opening left and right, i couldn't close any of them because stuff kept opening. I tried to soft reboot it and it didn't help. Once it rebooted stuff started opening itself at random again. I ended up pulling the SIM and battery out and leaving it for 5 minutes. When i put it back and powered it up the touch screen no longer worked, but apps weren't opening on their own.
What gives?
I have hard reset (which means it's waiting for me to touch the screen to setup my rom), i have also taken off the screen protector (in case it had something stuck under it. Neither of these things helped. Per the forums I got a new screen, just put it in, and the touch screen doesn't work still... I'm drawing a blank here can anyone give me some advice. Going back to my Prophet for the time being but I HATE not having a keyboard (and it's slower than molasses)
have you tried flashing a new rom via sd?
Check that the screen protector has not moved under the front bezel and keeps pressing your touchscreen.
Robert
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Any other suggestions?
fiddelm3742 said:
I have totally removed the screen protector and even replaced the screen for that matter so I dont think that's it. I haven't tried flashing a new rom. I just found it odd that this has worked for so long and now I get what appears to be hardware problems. As for flashing Via SD memory, is that better than doing it via cable for some reason? I'd be willing to give it a go...
Click to expand...
Click to collapse
Similar problem happened to my Kaiser phone, although no multiple files opened, the phone just won't react to any touching, not stylus pen either. So I first soft reset, then hard reset, none of them works, now the phone can Sync alright, but the screen just stands on the Window Mobile screen, saying "Tap the screen to set up your window mobile device"
I only have this new phone for <3 weeks.
I went to HTC site, want to download a latest ROM file from them, after typing in the S/N, it won't let me, saying that ROM is not suitable for my phone.
So now I am download ROM file from this site, will choose one to flash the phone, see whether it works.
I will call HTC tech support tomorrow after Thanksgiving, see what they suggest
Hope some gurus here can also make some suggestion, Thanks!
Well I replaced the LCD and the new LCD works great, but the screen still doesn't respond to touches. What gives?! I hard reset and I got past the windows screen alignment thing by creating a welcome.not file but it's still pretty much worthless w/o a touch screen. Anyone have any suggestions?
Whoa, i thought something odd was going on. Never mind i got entirely the wrong idea.
Ha, not the case.
Anyone know if a flex cable would fix my issue? I dont really know what the felx cable is for but i've seen posts about people replacing them w/ LCD problems. I don't know if it is touch screen related or not, and i'm kind of tired of buying parts that don't fix my problem
please just flash a new rom whch ever you want (for some reason i thought you said that it keeps restarting your device because if that was the case the only option you would have was to flash via sd as activesync would load long enough for you to get a connection to flash from the computer)..trust me just try it..what have you got to lose
I reflashed one yesterday actually. The newest HyperDragon (which is looks like a new one is available today) It wasn't rebooting but initially windows were popping open left and right so i restarted it a couple of times(which i first had the problem, not yesterday) Yesterday it worked like any normal rom w/o the ability to touch. Anywho, after the flash of a different rom. No luck. I'm thinking it's a hardware problem of some sort but as i've already replaced the LCD i have no idea what?
yah thats sounds funky..you can bring it in for a warranty exchange either at a local DSC or over the phone (that is if your with att) and if not call HTC..all devcies come with a 16 or 18 month warranty
Well I called ATT yesterday, apparently I purchased the phone On Oct 17th 2007 which means It's out of warranty (apparently it has a 12 month warranty?) So it sounds like I'm SOL. So, i guess I'm off to ebay to try and fine a phone that I can canibalize to try and get mine going again.
touch screen
this may sound dum but when you replaced the screen did you replace the touch part as this is different from the screen
Well I picked up this
http://www.blackberry8100parts.com/...B3-NEW-HTC-TyTN-II-KAISER-P4550-_p_35-70.html
which includes the digitizer (from what I know it's all one part when they send it to you) The screen has the digitizer built in. So i replaced the part they sent me.
I just stated having this issue. My touchscreen stopped responding to touches over the weekend while the keyboard was extended. I just took the phone apart to make sure everything was connected right & put it back together, & now the touchscreen doesn't work at all. This sucks!
Any news? i'm having the same problem: no response at all, stuck at "Tap the screen to set up Windows Mobile-based device"
An interesting problem with screen
well my tilt fell out of the car holster while using gps and i suspect the screen hit my gear shift. I didn't notice anything odd after i put the battery back in it (yeah it fell that hard lol). Later that night I went to check mail and noticed something not right. Turns out my screen seems to have been pushed in a bit. Well here's the issues I've noticed so far: All the touch responses seem fine except for 1) the screen alignment doesn't register taps, but otherwise the touchscreen works and 2) on the htc home screen, I can't tap the house icon unless I tap any other icon first.
Initially I thought there was some pressure or deformation right at that particular spot, but it reacts the exact same way in landscape mode. I can't tap the house icon first; I have to tap something else first, then the icon works fine until I open a program or something and go back to the home screen. Then I simply have to tap weather or something and then home.
I'd reflash the rom or do a hard reset, but the screen alignment didn't work when I tried it so I didn't want to get stuck at the "tap your screen to begin" part.
Any ideas or do I just need to buy another screen or maybe just the digitizer. the amount the screen seems recessed is maybe a millimeter at most. Just enough so that I noticed a difference when touching contacts just above the housing. I tried cleaning by using a business card and running between screen and housing. Ohh... and one more thing... when I open the cube and then close it, I get what I refer to a static frazzle for split second and it goes back to normal. That only happened a couple of times after the business card thing. Do you think I just loosened a connection? damn... I still haven't taken it apart yet. Think I need to. Any help appreciated.
If your screen does not work, you can still use your phone. There is an app that you use on your computer that acts as the touch screen. This also works when the screen craps out.
http://www.sparus-software.com/spip.php?page=download&lang=en&ref=at&t=tilt
(EveryWAN Remote Support Personal Edition - Free download)
yeah -- my touchscreen didn't crap out totally, it just got muffed up when I dropped it a bit. Well, i went ahead and installed codefreaks remote screen alignment thing and did a hard reset. Well, the hardreset did the trick w/out the need for anything else. The alignment worked and everything. So, i'm back in business. Everything seems to work properly, except that my screen is still recessed a tad; but, that's not a big deal really.

Touch Screen has stopped working

Basically about 2 months ago I rooted the phone and put in cyangen mod, everything was fine until the touch screen stopped working. Most of the time it was brief but sometimes the touch screen just wouldn't work for a whole day and then start working again. Thinking I had done the root wrong I unrooted the phone back to it's orginal. However the problem still showed up despite that. I recently updated it to the donut update, and that's when the problem got worse. Now the touch screen won't work and when I go to the contacts using the trackball I get an error. And anytime i recieve a phone call I get the same error. Thinking it was a software problem and factory reset the phone and scaled it back to rc29. But still the touch screen doesn't work, and now because of that I am stuck on the setup screen at the beginning which ask you to touch the android to continue (which I can't). I have wiped and factory reset the g1 many times, and usually that has made the touch screen work again, but now it seems to not work at all. I deducted over the last couple of days that it must be the power adapter causing all of this. Since I got the touch screen working yesterday and had no problems the entire day. Then a hour after I put it on the charger the touch screen stopped working again and hasn't worked since. Is there anything that can be done at this point to fix it? I read somewhere about a script that makes the g1 touch screen work again but haven't been able to find it.
Same problem
I'm having a near identical problem. Most all of the symptoms are the same - except my touchscreen has only worked for a few seconds on one occasion after the initial failure. I've tried wiping, and about 3 different mods (JaCx, Cyan, Enomther). None have helped, and currently I'm stuck at the same point where it's asking me to touch the Android to begin, and I can't. The only difference is that I didn't unroot. So I'm going to try a few more roms, but I doubt I'll have any luck. My phone was also put on a charger that wasn't made for the g1. I began to notice the problem thereafter. Not sure why, but that certainly seems like the only reasonable variable which could be causing this.
Anyone out there have any ideas? It'd be much appreciated.
Have you guys dropped your phone recently? I'd like to share my story as well. Two weeks ago, I dropped the phone on hard tile while it was still in its leather/suade case. I picked it up and instantly found the touch capabilities were gone (with screen open or closed). After many soft resets and not knowing how else to fix it, I also decided to revert back to rc29 from cyanogenmod. Still no go, after being stuck at the setup screen. I disassembled the phone, using the G1 service manual, to make sure none of the ribbons were knocked loose and examined the lcd and digitizer for any cracks. No problems that I could see. Disassembled, and reassembled the phone a few more times and still with no avail.
If you were one of the first to receive a g1, such as myself, oct 22nd is the last day of your 1 yr warranty. So give t-mobile a call, and submit a claim before then if you want to take advantage of it. Make sure you reflash to stock image, and that there are no signs of visible damage on the phone or else the warranty will be void. Good luck.
Edit: If your phone's touch screen is working at random times, I'm suspecting its a hardware problem, most likely a damaged or worn out flex cable from opening and closing the screen. Try slowly opening the screen and touching the screen at the same time to see if anything happens.
When I was waiting for my G1 I came on this forum (Had a Diamond before so knew about it anyway) and found a topic discussing problems like this... If you have an Early G1 then I'm guessing this is the problem...
There is some sort of design flaw with the ribbon cable connecting the Touch Screen to the Mainboard catching onto the sliding mechanism. This eventually destroys the cable and causes the touchscreen to stop working. On Later models they've fixed it by taping the ribbon cable down instead of letting it hang loose.
In short... you need to unroot your phone and take it back to T-Mobile.
Interesting thoughts, thanks for the input. My G1 has never been dropped, and is actually relatively new, only a couple months old. But it's not on T-Mobile. I flashed MLIGN 2.5.7 (Hero). I did this b/c I know it bypasses the typical "touch here" activation BS. So I can boot, and get into the OS just fine. Which is where I'm at now.
Here's what I've done. I completely wiped my Fat32, Ext2, and Linux_Swamp partitions using Gparted. I completely wiped the phone using Cyan 1.4 Recovery. Yet no matter which Mod I use my touch screen doesn't cooperate, AND (no matter which mod I'm using) when I try to launch basic apps (dialer/phone, some settings menus, etc) I am notified that, "android.process.acore" has stopped. Without fail. It ALWAYS does this when attempting to access the dialer/phone. I would be more than happy to take some time troubleshooting the touch screen IF my damn dailer/phone would work. But it does not.
I read on some other forums about there being 2 compcache files for someone who had a similar issue. That's slightly above my head, though, and I'm not quite sure how to go about checking that and/or deleting one. Really, I just want to be able to access my dialer/phone app for the time being. Then I can take some time to trouble shoot the touch screen.
Anyone have any ideas about the process failing, or the compcache affect?
Also, I'm using 1.33.2005 SPL.
Thanks
gat0rjay said:
Interesting thoughts, thanks for the input. My G1 has never been dropped, and is actually relatively new, only a couple months old. But it's not on T-Mobile. I flashed MLIGN 2.5.7 (Hero). I did this b/c I know it bypasses the typical "touch here" activation BS. So I can boot, and get into the OS just fine. Which is where I'm at now.
Here's what I've done. I completely wiped my Fat32, Ext2, and Linux_Swamp partitions using Gparted. I completely wiped the phone using Cyan 1.4 Recovery. Yet no matter which Mod I use my touch screen doesn't cooperate, AND (no matter which mod I'm using) when I try to launch basic apps (dialer/phone, some settings menus, etc) I am notified that, "android.process.acore" has stopped. Without fail. It ALWAYS does this when attempting to access the dialer/phone. I would be more than happy to take some time troubleshooting the touch screen IF my damn dailer/phone would work. But it does not.
I read on some other forums about there being 2 compcache files for someone who had a similar issue. That's slightly above my head, though, and I'm not quite sure how to go about checking that and/or deleting one. Really, I just want to be able to access my dialer/phone app for the time being. Then I can take some time to trouble shoot the touch screen.
Anyone have any ideas about the process failing, or the compcache affect?
Also, I'm using 1.33.2005 SPL.
Thanks
Click to expand...
Click to collapse
I realize this is an old thread but did you ever get the issue figured out? My phone did this just last night
Alright as suggested earlier in the thread it was a hardware issue. I found that my touchscreen had become unplugged and was causing the errors.
Sorry to bring this guy back from the dead but I figured I would educate a few people one a common touch-screen problem.
Yeah, 90% of the time it's the adapter you're using. Being a G1 owner with lots of mini-USB chargers i found the same problem. Also being a tech rep at t-mobile, i've had lots of calls revolving around this and fixing it.
The G1 uses a 1000mA charger (1A). For me, the touch-screen going haywire/unresponsive seemed to get more severe as the the chargers specs went lower. An old Motorola charger at 500mA was ridiculous. Talking to customers with the exact symptoms and hardware, eventually lost all functionality of the touch screen.
On a side note, it's not just the G1 that has problems with the wrong charger. A linksys router I have has a standard power port connection type in the back but requires a bigger amp adapter. hooking the wrong one up will cause complete failure. In many situations, not enough energy is just as detrimental as too much energy. One last example: Take a big 10" sub driver, hook it up to a crappy 300W amp, you get an overheated coil and eventually a busted driver.
So, lesson is, just because it fits doesn't mean it's safe to use. I never mix and match adapters with any device ever because of the risk of damage.

[Q] Can't charge while phone is on

I flashed a cyan build delta using the app cyandelta the other day and after that, the phone refused to charge unless it was turned off. I figured the build had broken something but discovered that the phone would hang when trying to boot into twrp. So i did a full reset using the 1.29 ruu to see if that would help and it did not except now i get a warning on screen saying the usb host is unplugged and unable to change in the notification area.
the stock build also suffers from other random quirks like during phone call it repeatedly turns on and off the speaker phone and the gyro sensor will randomly turn my screen sideways.
took it into the sprint store and said there was corrosion on the charging port but i know it has not gotten wet at all the past few days and that the problem occurred right after the flash.. They refuse to touch the phone and say i have to pay 150 to replace it. I have tried cleaning the port with a dry toothbrush to no avail
Is there anything else i can try and re flash that might fix some messed up software or was flashing the ruu the best bet.
Thanks for your time and help
-shadow
Had the EXACT same issue on mine, never unlocked or rooted. Sometimes the volume would just disappear as well (even when using headphones) but the Beats icon would still show. Everything would go into permanent landscape mode at times. Calls answered in speaker automatically. If I plugged it in while it was on I got the usb host notification. The car mode app thingamajig launched for no flippin' reason, had to turn it off to charge it, all that jazz.
Definitely a hardware issue with the usb port. I took mine to Sprint hoping for a replacement but it has a barely visible crack horizontally across the screen so that was denied unless I agreed to pay the $150 deductible. It flew out of a car with me about a month prior so that did some damage to the phone. Then I dropped it the day these issues started happening. The port felt loose, I figured all of the wear and tear messed it up.
I didn't actually fix the phone though. It just randomly started working smoothly again and I haven't had a problem with it since - it has been a couple of months now. From all of the research I did, I saw that most people had the problem just fix itself for no reason and never come back. I tried cleaning the port and poking and prodding but nothing fixed it. Just one day, BOOM, all better.
Hope it decides to behave soon
Sent from my HTCONE using Tapatalk 2

Touchscreen Issues

Hi Guys; I recently got my new 2nd Generation Moto G but after setting it up and using it for 20 minutes or so I noticed that sometimes while scrolling through settings, contacts and webpages, that when i am swiping over a horizontal band in the exact center of the screen, the sensitivity of that region of the screen becomes very unreliable and the phone will often interpret scrolling as a press. While scrolling in my phonebook it has a tendancy to call people, when browsing the web it has a tendancy to press links i never wanted it to, and this same behaviour is repeated regardless of what application i am in.
It certainly seems to be more frequent and prominent while I am charging the phone, regardless of the charge current. I have charged it from my pc, 1000ma wall adapter and 850ma wall adapter; all with the same results.
Sometimes turning the screen off and on again can rectify this, but its usualy back again in no time
I have tried factory resetting the phone, with the screen protector both on and off, while on charge and off charge and while making sure nothing else could be interfering with the touch screen i.e., a case.
I only got this phone from ebuyer in the UK 3 days ago, 2 days earlier than it was actually ment to come! so its a real shame im having these problems, I've already spoken to Motorola about it and they have advised me to RMA the phone as they cant give me a definitive answer as to wether or not this is a Hardware or Software issue.
Has anyone else been having issues similar to those that I have experienced with their own new Moto G devices
I would RMA, mine is fine.
my moto(2014) has the same touch screen issues while phone is on charging. unresponsivene & its very annyoing. hpns only whn ph is charging
Sent from my GT-P3100 using XDA Free mobile app
xDDen said:
my moto(2014) has the same touch screen issues while phone is on charging. unresponsivene & its very annyoing. hpns only whn ph is charging
Sent from my GT-P3100 using XDA Free mobile app
Click to expand...
Click to collapse
Are you using the official charger or some other one
Check u r charger or wall socket. its becoz of voltages issue.
ohh okk thnx guyz i was using samsung charger.
Sent from my GT-P3100 using XDA Free mobile app
Unfortunately my phone displays this behaviour both on and off the charger. It does however display the issue more frequently while on charge.
The chargers I'm using are all 5v which is typical of a phone charger. I have one at 850ma which charges painfully slow, I have another at 1000ma which charges much more quickly. And I use my Computers USB ports to charge at times, no matter how I charge the phone the problem remains.
Sometimes it will work fine for an hour or so then it will go insane on me. I have requested RMA with ebuyer. Had the phone only showed this issue on charge I may have been contempt with it, but the problem can happen anywhere, anytime and for a brand new phone that's not acceptable.
@ xDDen: have you tried charging the phone from any other source besides the Samsung charger you have?
yes now am charging with moto g's charger and it is working fine now without any issues
Sent from my GT-P3100 using XDA Free mobile app
Aileach XDA said:
Hi Guys; I recently got my new 2nd Generation Moto G but after setting it up and using it for 20 minutes or so I noticed that sometimes while scrolling through settings, contacts and webpages, that when i am swiping over a horizontal band in the exact center of the screen, the sensitivity of that region of the screen becomes very unreliable and the phone will often interpret scrolling as a press. While scrolling in my phonebook it has a tendancy to call people, when browsing the web it has a tendancy to press links i never wanted it to, and this same behaviour is repeated regardless of what application i am in.
It certainly seems to be more frequent and prominent while I am charging the phone, regardless of the charge current. I have charged it from my pc, 1000ma wall adapter and 850ma wall adapter; all with the same results.
Sometimes turning the screen off and on again can rectify this, but its usualy back again in no time
I have tried factory resetting the phone, with the screen protector both on and off, while on charge and off charge and while making sure nothing else could be interfering with the touch screen i.e., a case.
I only got this phone from ebuyer in the UK 3 days ago, 2 days earlier than it was actually ment to come! so its a real shame im having these problems, I've already spoken to Motorola about it and they have advised me to RMA the phone as they cant give me a definitive answer as to wether or not this is a Hardware or Software issue.
Has anyone else been having issues similar to those that I have experienced with their own new Moto G devices
Click to expand...
Click to collapse
Yea i have the same problem, what did u do.
mnishamk said:
Are you using the official charger or some other one
Click to expand...
Click to collapse
Mine actually didn't come with a charger. I was a bit surprised, but checking the Amazon page (for Germany, since I bought it here, though not from amazon) reveals that this seems correct/intentional. It did include the usual µUSB cable though (and it's not like I don't have enough USB chargers).
For completeness sake: I don't have the described problem, no matter if plugged in or not...
Touch issue
I'm using Moto G 2014 charger only and still facing issue bringing down notification panel.
Also i face issue when trying to unlock phone via pattern lock.
Flipkart offering me a replacement- Shall i go for it?
Been having a problem with the screen, mainly on the back soft button part of the screen, keep finger on it and it multi presses like a mad thing, doesn't happen all the time though, was driving me crazy. took off the Ultimate Shield screen protector and the problem went away, put the shield back on and the problem didn't come back, then couple of hours later (today) I got the ota update and the screen goes mad again, took shield off again and the problem continued, a few minutes later and it's all fine again. now (a few hours later) still all is fine.
Problem is I was all ready for doing a RMA to Amazon.co.uk for it, stuck on what to do now as if I send it back and they find no fault.
mtbgus said:
Been having a problem with the screen, mainly on the back soft button part of the screen, keep finger on it and it multi presses like a mad thing, doesn't happen all the time though, was driving me crazy. took off the Ultimate Shield screen protector and the problem went away, put the shield back on and the problem didn't come back, then couple of hours later (today) I got the ota update and the screen goes mad again, took shield off again and the problem continued, a few minutes later and it's all fine again. now (a few hours later) still all is fine.
Click to expand...
Click to collapse
Same issue here, but without any screen protector. OTA update hasn't changed anything. Sometimes it works and sometimes the screen recognizes double/triple taps where it should be only one...
mtbgus said:
Been having a problem with the screen, mainly on the back soft button part of the screen, keep finger on it and it multi presses like a mad thing, doesn't happen all the time though, was driving me crazy. took off the Ultimate Shield screen protector and the problem went away, put the shield back on and the problem didn't come back, then couple of hours later (today) I got the ota update and the screen goes mad again, took shield off again and the problem continued, a few minutes later and it's all fine again. now (a few hours later) still all is fine.
Problem is I was all ready for doing a RMA to Amazon.co.uk for it, stuck on what to do now as if I send it back and they find no fault.
Click to expand...
Click to collapse
Well the touch screen issues got way too much for me so I returned the phone to Amazon uk and got a refund, bought another moto g from Argos the same day I returned it and I'm glad I did, everything is ok with the new phone, no screen issues at all.
Moto G 2014 Tocuh Screen issues
Same issue here.
Bought phone 1 week ago from Argos. Initially fine, then suddenly cant use the swipe down notification bar.
Turned on the Show Touch indicator in Developer options and it clearly shows that the screen is registering the touches about 0.5cm down the screen from where I am touching. So you can never hit the notification bar when its doing that. I found that turning the screen off with the power button and then back on again usually clears the problem.
In the UK the phone only comes with a USB cable, so I use a variety of chargers.
I think mines going back as not functioning properly
I also having same issue you should post your emei. It might be I purchased defective from one of previous user having same issue. I'm at Singapore.
EMEI1: 359296054942769
EMEI2: 359296054942777
Android Version: 4.4.4
Based Version: MSM8626BP_1032.394.88.00R,EMEA_DSDS_CUST
Kernel Version: 3.4.42-g668a77b
[email protected] #1
Tue Aug 26 20:30:04 CDT 2014
System Version: 21.11.23.titan_retaildsds.retaildsdsall.en.03.reteu
Build Number: KXB21.85-23
DavidITunstall said:
Same issue here.
Bought phone 1 week ago from Argos. Initially fine, then suddenly cant use the swipe down notification bar.
Turned on the Show Touch indicator in Developer options and it clearly shows that the screen is registering the touches about 0.5cm down the screen from where I am touching. So you can never hit the notification bar when its doing that. I found that turning the screen off with the power button and then back on again usually clears the problem.
In the UK the phone only comes with a USB cable, so I use a variety of chargers.
I think mines going back as not functioning properly
Click to expand...
Click to collapse
I am currently having this problem
francescomulas said:
I am currently having this problem
Click to expand...
Click to collapse
Me too! I am very sorry to learn that it is a hardware problem.
I'm afraid to take it to the service center because the problem is intermittent and technicians could not detect it .
Any of you have solved?
If it was a hardware problem we could try asking a kind of compensation, I don't know, some free accessories, or maybe the change of the device...
Had a problem with mine, it would go mental pressing the back softkey, press it once and it would just keep doing it by itself, so a problem with lower left of the screen, sent it back to Amazon for refund and got another one from Argos, this one is mostly alright with the screen touches but will sometimes do a double press or think a press is a swipe anywhere on the screen, it's not been so bad that I kept it, but now other problems like the memory shortage making apps close is starting to really get to me, also the screen rotation get stuck in landscape now and then, even it sometimes goes to landscape by itself.
In the process of getting a different phone as this is starting to annoy too much.

Note 4 Wifi problem

I recently got my note 4 screen replaced. While i was using the phone while still cracked the Wi-Fi worked fine. After getting my phone from the repair shop, the s pen was glued inside the phone , the screen was slightly popping out and the Wi-Fi was messed up. I couldn't get any signal unless im very close to my Wi-Fi router. I take the phone back to the repair shop and explained everything. Once I got the phone back, everything was fixed but the Wi-Fi problem was still there. I tried factory resetting the phone but that didn't work. I would like a solution to this. Thanks.
red_2 said:
I recently got my note 4 screen replaced. While i was using the phone while still cracked the Wi-Fi worked fine. After getting my phone from the repair shop, the s pen was glued inside the phone , the screen was slightly popping out and the Wi-Fi was messed up. I couldn't get any signal unless im very close to my Wi-Fi router. I take the phone back to the repair shop and explained everything. Once I got the phone back, everything was fixed but the Wi-Fi problem was still there. I tried factory resetting the phone but that didn't work. I would like a solution to this. Thanks.
Click to expand...
Click to collapse
To me it sounds like the repair shop owes you a new phone ha. No seriously though, if you had all those issues after the first repair, especially the glued spen, I would to the phone back and make damn sure I didn't leave until it was exactly the way it was when you took it except with a shiny new screen.

Categories

Resources