Help help help !!!! - LG Optimus 2x

It was stuck on lg logo on start up , now it dont start up and didn`t going on cwm and nvflash with 2 volume buttons pressed without battery via usb .... I cant use nvflash for unbricking , it doesnt charge and now it doesnt start at all maybe i have problems with vol buttons but i dont think so

iun3r said:
It was stuck on lg logo on start up , now it dont start up and didn`t going on cwm and nvflash with 2 volume buttons pressed without battery via usb .... I cant use nvflash for unbricking , it doesnt charge and now it doesnt start at all maybe i have problems with vol buttons but i dont think so
Click to expand...
Click to collapse
Nvflash driver is installed? Do you see your phone as an Apx device in the device manager under the section called Other Devices, or do you see nvida...something... device under the USB devices?
Try to push really hard both volume keys. the key on my phone are really junky i have to try 10-15 times to get nvflash mode.
Tapatalk-kal küldve az én Nexus 5-el

i try all day and all night pushing buttons without battery pluging usb nothing see computer , not nvidia not nvflash

iun3r said:
It was stuck on lg logo on start up , now it dont start up and didn`t going on cwm and nvflash with 2 volume buttons pressed without battery via usb .... I cant use nvflash for unbricking , it doesnt charge and now it doesnt start at all maybe i have problems with vol buttons but i dont think so
Click to expand...
Click to collapse
lol What have you been doing with your account since 2012? Anyway check your phone's usb ports, try different usb cable and connect it to your motherboard port.

Smartflash are your needed friend.

CononCon said:
lol What have you been doing with your account since 2012? Anyway check your phone's usb ports, try different usb cable and connect it to your motherboard port.
Click to expand...
Click to collapse
do you think i dont know what to do ? i try nv flash i try everything to unbrick but i go to service and he say its i dont know how to say in english its short electricity burned

iun3r said:
do you think i dont know what to do ? i try nv flash i try everything to unbrick but i go to service and he say its i dont know how to say in english its short electricity burned
Click to expand...
Click to collapse
Time for a new phone?

Related

[Q] recovery boot sector

Hi. I apologize for my bad english, I'm from Ukraine
When I press Volume + and insert the USB cable to the phone, nothing happens. How can I restore the boot loader? The method described in this forum (by KDZ) tried. It does not help. I hope for your help. thanks in advance
Shova97 said:
Hi. I apologize for my bad english, I'm from Ukraine
When I press Volume + and insert the USB cable to the phone, nothing happens. How can I restore the boot loader? The method described in this forum (by KDZ) tried. It does not help. I hope for your help. thanks in advance
Click to expand...
Click to collapse
Press and hold Volume Up, then plug the USB cable, your screen should enter the recovery mode. CMIIW.
redy2006 said:
Press and hold Volume Up, then plug the USB cable, your screen should enter the recovery mode. CMIIW.
Click to expand...
Click to collapse
it is doesn't help. when i try this, nothing happens. screen are don't turn on.
Shova97 said:
it is doesn't help. when i try this, nothing happens. screen are don't turn on.
Click to expand...
Click to collapse
Oops, forgot to remove battery first, then Vol-Up and plug USB cable...
redy2006 said:
Oops, forgot to remove battery first, then Vol-Up and plug USB cable...
Click to expand...
Click to collapse
I remove battery and do this steps.
I read this topic - http://forum.xda-developers.com/showthread.php?t=1275315
Can you help me?
If you bricked your phone which is very hard to do you`re fu**.
Only way to bring it back is with Jtag and i don`t think riff jtag can do this job.
Just pray and search a jtag in your area !
the drivers installed correctly ?
Just try it at another computer or install a second and if possible different version of Windows. Then there install drivers and follow guid again. I also had problems under Windows XP already. Then tried it at the same PC, but Windows 7 64 bit and suddenly it worked like a charm I always have dual boot, just in case something doesnt work I play around much with my installations
Easiest way is try it at another PC, idk, maybe a friend's or maybe u have a second one.
Already tried to disable Lg Modem?

[Q] Help!! my LG p9700 is totally dead

my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
mrapeace said:
my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
Click to expand...
Click to collapse
Is SW Update still accessible?
Sent from my LG-P970
xonar_ said:
Is SW Update still accessible?
Sent from my LG-P970
Click to expand...
Click to collapse
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
mrapeace said:
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
Click to expand...
Click to collapse
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
You're tried?
N00BY0815 said:
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
Click to expand...
Click to collapse
nothing appear.... if we try to root our phone is that damage our phone hardware??
mrapeace said:
nothing appear.... if we try to root our phone is that damage our phone hardware??
Click to expand...
Click to collapse
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
xonar_ said:
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
Click to expand...
Click to collapse
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Same Here
Hello,
I have exactly the same problem as statet above. My phone is totally black.
nothing happens when i put it on charger,
nothing happens when i hold power button,
nothing happens when i hold power buton + down volume,
nothing happens when i remove battery, hold down volume and plug in usb.
My phone worked fine, i have used like 3 or 4 roms. i made a backup of a ROM.
This went totaly succesfull, just as it did before a couple of times.
After this backup it rebooted succesfully to my CM10 nightly.
Then it said my SD card got dismounted and i opend ROM manager and clicked on reboot to recovery.
and then i got in the situation where i am now.
can anyone please help me? im pretty scared that i bricked my phone.
Which is kinda odd because it wasn't aborted during any flash or backup.
Hardware cannot be damaged right ?
N00BY0815 said:
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
Click to expand...
Click to collapse
yes...i already did to plug in the cable without battery in the phone...and that why i got the problem when i convert a kdz file to bin and fls files then i flash it...the process is complete...after that i look my phone totally black...no screen respon....
xonar_ said:
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Click to expand...
Click to collapse
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
mrapeace said:
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
Click to expand...
Click to collapse
I would recommend sending it into repair shop. At this point we can't do anything if SW update mode is nor accessible. I've been working on a way to recover with shot bootloader but to no avail.
Sent from my LG-P970

Lgp990 stuck at logo screen, not detected by windows

Hi there, I'm new here but I have been following this forum for a long time.
Here's my problem:
I own a LGP990 with DJANGO rom. apart from the random stuck in the DJANGO loading screen which required me to reinstall it, it was all working fine.
Until yesterday, when I plugged it to recharge. The battery charged for a while and then got stuck for hours when almost done.
I unplugged it and try to turn it on but since that moment it always gets stuck at LG logo screen and when plugged it doesn't display any battery charging. I then tried to start recovery to reinstall from zip as I did every time it got stuck in the django loading screen, but recovery does not start.
No problem, I thought, lets smartflash/nvflash a stock rom and i'm good to go. Wrong, the phone won't even get recognized by windows, though I installed the driver several times (disabling driver signature as well) and running it as admin; i tried different driver versions, different usb cables... It does not even play that background sound when plugging usb devices...
I'm using windows 7 32bit.
That's it, I have ran out of ideas... anyone got one? (besides sending it to assistance, since warranty is voided)
little edit: whenever i plug the battery the phone start by itself!
gaernik said:
Hi there, I'm new here but I have been following this forum for a long time.
Here's my problem:
I own a LGP990 with DJANGO rom. apart from the random stuck in the DJANGO loading screen which required me to reinstall it, it was all working fine.
Until yesterday, when I plugged it to recharge. The battery charged for a while and then got stuck for hours when almost done.
I unplugged it and try to turn it on but since that moment it always gets stuck at LG logo screen and when plugged it doesn't display any battery charging. I then tried to start recovery to reinstall from zip as I did every time it got stuck in the django loading screen, but recovery does not start.
No problem, I thought, lets smartflash/nvflash a stock rom and i'm good to go. Wrong, the phone won't even get recognized by windows, though I installed the driver several times (disabling driver signature as well) and running it as admin; i tried different driver versions, different usb cables... It does not even play that background sound when plugging usb devices...
I'm using windows 7 32bit.
That's it, I have ran out of ideas... anyone got one? (besides sending it to assistance, since warranty is voided)
little edit: whenever i plug the battery the phone start by itself!
Click to expand...
Click to collapse
thats an issue I had, power button is making funny games, to enter recovery keep the vol- button pressed before you return the battery.
It always worked for me. let me know if it works.
this is what u have to do man...
http://www.ibtimes.co.uk/articles/40...timus-p990.htm
http://androidadvices.com/unbrick-lg...hone-tutorial/
http://progmaq.es/cm10/progmaq-defau...10-20121105.7z
http://progmaq.es/cm10/progmaq-defau...10-20121105.7z
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
massimo69 said:
thats an issue I had, power button is making funny games, to enter recovery keep the vol- button pressed before you return the battery.
It always worked for me. let me know if it works.
Click to expand...
Click to collapse
what do you mean before you return the battery? i kept vol- button before removing and then plugging it to the usb but still not detecting
interr said:
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: The pack includes the APX driver (folder driver)
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Click to expand...
Click to collapse
4/6 of your link are broken dude
gaernik said:
what do you mean before you return the battery? i kept vol- button before removing and then plugging it to the usb but still not detecting
Click to expand...
Click to collapse
I meant to enter recovery. If your phone turns on when you put in the battery, the power button is stuck in a connected position so to enter recovery remove the battery, press the vol- and then insert the battery. If you get your phone to enter recovery and reflash the rom I will tell you what to try to fix the issue.
1.)remove battery
2.)press volume - and volume +
3.)connect phone to pc via usb
4.)download apx driver
5.)(go to device manager install manually apx driver, select the folder where you downloaded and extracted apx ini driver file
6.)flash using nvflash
7.)enjoy.
massimo69 said:
I meant to enter recovery. If your phone turns on when you put in the battery, the power button is stuck in a connected position so to enter recovery remove the battery, press the vol- and then insert the battery. If you get your phone to enter recovery and reflash the rom I will tell you what to try to fix the issue.
Click to expand...
Click to collapse
doing as you said brings me to the "s/w upgrading" screen, not into recovery
wawyed said:
1.)remove battery
2.)press volume - and volume +
3.)connect phone to pc via usb
4.)download apx driver
5.)(go to device manager install manually apx driver, select the folder where you downloaded and extracted apx ini driver file
6.)flash using nvflash
7.)enjoy.
Click to expand...
Click to collapse
problem is that nvflash says "no usb device found" and phone does not appear in device manager
gaernik said:
doing as you said brings me to the "s/w upgrading" screen, not into recovery
Click to expand...
Click to collapse
thats because you have your usb connected
massimo69 said:
thats because you have your usb connected
Click to expand...
Click to collapse
it says so even with usb disconnected :|
gaernik said:
it says so even with usb disconnected :|
Click to expand...
Click to collapse
Then use the AIO toolkit to smartflash a new rom
massimo69 said:
Then use the AIO toolkit to smartflash a new rom
Click to expand...
Click to collapse
as I said earlier, nvflash/aio toolkit give me a "usb device not found" error
gaernik said:
doing as you said brings me to the "s/w upgrading" screen, not into recovery
problem is that nvflash says "no usb device found" and phone does not appear in device manager
Click to expand...
Click to collapse
if you can enter s/w upgrading then you can use smartflash to flash a new rom.
gaernik said:
as I said earlier, nvflash/aio toolkit give me a "usb device not found" error
Click to expand...
Click to collapse
in AIO you have an option to smartflash roms not nvflash. You need to unpack a KDZ rom and install the ROM via smartflash
all the instructions are in the op of the AIO toolkit
the problem still remains, no phone detected and no com port appears in smartflash...
gaernik said:
the problem still remains, no phone detected and no com port appears in smartflash...
Click to expand...
Click to collapse
mmmmhhhhh..... change usb port, change cable, reinstall the drivers. other than that I am at loss
AIO tool has an option to install Nvflash driver. Its the last option in a different color.
Or you could try to reinstall LG driver. I just downloaded the latest driver from lg support tool today. It works fine.
And be noted that you have to hold down both volume up and down while plugging the USB cable to enter nvflash mode. Holding vol down while plugging the cable in will enter boot loader mode which is not the same thing. Remember to remove the battery first of all.
Sent from my LG-P990 using xda premium
massimo69 said:
mmmmhhhhh..... change usb port, change cable, reinstall the drivers. other than that I am at loss
Click to expand...
Click to collapse
done all of that, nothing worked...
mintjustin said:
AIO tool has an option to install Nvflash driver. Its the last option in a different color.
Or you could try to reinstall LG driver. I just downloaded the latest driver from lg support tool today. It works fine.
And be noted that you have to hold down both volume up and down while plugging the USB cable to enter nvflash mode. Holding vol down while plugging the cable in will enter boot loader mode which is not the same thing. Remember to remove the battery first of all.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
installed the driver from support tool but still cant get it recognized neither by smartflash nor nvflash
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver) and install the drivers
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
guys I appreciate all your help but nothing worked. still windows does not detect it, I even plugged to a pc that used to see it :|
lg optimus 2x ics root
gaernik said:
guys I appreciate all your help but nothing worked. still windows does not detect it, I even plugged to a pc that used to see it :|
Click to expand...
Click to collapse
hey...ur problem solved??

[Q] Optimus 4X HD full brick

I tried to put the CM10 on my phone, after installing the zip in recovery mode, I rebooted the device and it never returned to start. Does not show a single light. Do not enter in any way with any combination. When I connect by usb the only thing that appears in device manager is "apx device." Already tried so many things and nothing worked.
anyone have any idea what's going on?
by the way, I tried a lot here in xda before opening a thread.
is your bl unlocked?
Rudjgaard said:
is your bl unlocked?
Click to expand...
Click to collapse
yes
does it vibrate? does it turn on? can you control it through adb? can you enter sw mode?
Rudjgaard said:
does it vibrate? does it turn on? can you control it through adb? can you enter sw mode?
Click to expand...
Click to collapse
No, no, no and no. the only sign of life when it is connected to the pc. Appears "apx" in device manager.
Yeah you are in apx mode, which is basically the boot section of the nvidia tegra chipset.
You should be able to boot normally by unplugging the phone, remove battery for a few seconds, reinsert and hold power button for about 10 seconds
Also try holding power and vol+ (hold them a while) you should be able to boot into normal recovery
Rudjgaard said:
Yeah you are in apx mode, which is basically the boot section of the nvidia tegra chipset.
You should be able to boot normally by unplugging the phone, remove battery for a few seconds, reinsert and hold power button for about 10 seconds
Click to expand...
Click to collapse
I've try that but dont work.
In device manager the apx device is it properly installed or does it have the triangle?
When it first connected as apx device it probably asked you for drivers, i doubt you installed them.
I don't know if the apx drivers for the 04 are out already, check these terms in xda i know some people have been working on them.
Maybe you can find them here
If the device isn't bricked you are in a situation in which you should be able to flash stuff.
For some this method worked:
Try turn off phone
take battery out
hold vol- and put usb cable into phone
if s/w mode starts put battery in and flash kdz
Otherwise check this thread out
or this
I have to go out and can't follow you for a while, sorry
Rudjgaard said:
In device manager the apx device is it properly installed or does it have the triangle?
When it first connected as apx device it probably asked you for drivers, i doubt you installed them.
I don't know if the apx drivers for the 04 are out already, check these terms in xda i know some people have been working on them.
Maybe you can find them here
If the device isn't bricked you are in a situation in which you should be able to flash stuff.
For some this method worked:
Try turn off phone
take battery out
hold vol- and put usb cable into phone
if s/w mode starts put battery in and flash kdz
Otherwise check this thread out
or this
I have to go out and can't follow you for a while, sorry
Click to expand...
Click to collapse
it have the triangle, but i jus want it in normal mode. I dont want that apx mode so i dont need the drivers. But tks for every thing
condegil said:
it have the triangle, but i jus want it in normal mode. I dont want that apx mode so i dont need the drivers. But tks for every thing
Click to expand...
Click to collapse
The only way for you to get connected in APX is without battery, connect to PC while pressing vol- & vol+.
Anyway... why you want to do that? APX mode doesn't work in JB.
Ok... I got it.
Did you tried to deactivate the APX device in device manager?
You can try to performe the bootloader unlock again (run adb and connect the phone while the program wait for device...)
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html (instructions inside).
Or try to get in SW mode by trying untill it works... (connect to PC while pressed vol-).
Any update on the problem?
Rudjgaard said:
Any update on the problem?
Click to expand...
Click to collapse
No, i think what happened was that all the firmware is erased and this naturally gave access to apx that should be hidden by the software. Probably there was some error when I wipe to put the CM10. I see no other explanation.
The phone is actually mine. Already sent it to warranty hoping they'll fix it.
Resuming, the phone went unexpectadly in APX mode and havent found a way of quitting that mode, couldn't boot S/W neither bootloader.
And btw the phone is carrier locked and to be honest I'm not sure if it might be part of the problem or not. Anyway in about two weeks the phone should be back and hopefully fixed. If not I'll check here for some more help guys, thanks for attetion so far

[Q] LG P970H S/W Screen

Well My sister and her boyfriend were trying something whit her phone, I dont have a clue what the hell they were trying, at the end of the day, she comes to me with her LG P970H with the screen S/W Upgrade please wait while upgrading.
I try to Connect the Phone to the PC with the battery and The Pc makes a Sound and says that the USB is not recognized.
I connect the Phone without Battery And the same happens, Sound and not recognized.
Connect Pressing the Vol - , Same happens
Connect Pressing the Vol + Same Happens
Connect Pressing the both buttons with and without the battery Same Happens.
Allright then its the drivers, I go Ahead and download the Lasted Usb Drivers from LG, Try again and nothing new happen.
Download some Old Usb Drivers, Same thing nothing new happens.
Why and When does the S/W upgrade Please wait while upgrading screen appears. I think I can install another OS or make a Hard reset on the Phone if i can get the PC to Detect it. Its not the Cable and its not the PC. Tried 3 diferent cables and 2 pcs and a Macbookpro. I live in mexico and im phone company its TELCEL if that helps.
It appears as soon as i turn on the phone.
PD: please if you know what im dealing with , write the answer for dumb people like me, its hard to know what you are talking about when using names like ST, KDZ and stuff and english its not my mother languaje so dumb it for me. THX!
You must read this.
And you need the bin and fls from KDZ to extract and root your device(if you want it rooted). Since here you should look for yourself.
A soft reset is keep pushing Vol+ + Power for 5 secs.
Mexickano said:
You must read this.
And you need the bin and fls from KDZ to extract and root your device(if you want it rooted). Since here you should look for yourself.
A soft reset is keep pushing Vol+ + Power for 5 secs.
Click to expand...
Click to collapse
That wont Work, I already tried the SF, and it wont detect the Phone, Theres no Comunication Driver.
chulex67 said:
That wont Work, I already tried the SF, and it wont detect the Phone, Theres no Comunication Driver.
Click to expand...
Click to collapse
Ok, the phone was rooted?, Did you tried the soft reset?, Have you removed the battery and turn it off by 5 mins.(not necessary 5 mins but just an aproximate)?
Mexickano said:
Ok, the phone was rooted?, Did you tried the soft reset?, Have you removed the battery and turn it off by 5 mins.(not necessary 5 mins but just an aproximate)?
Click to expand...
Click to collapse
I think the phone was rooted i really dont know i think they were trying to update the system. I tried the Soft Reset Nothing happens, I think its not charging anymore it will only turn on when i connect the Usb cable. I tried removing the battery for 10 mins and tried again all steps. My Problem its that the pc Detects that theres an Usb, but it wont recognize it.
After i plug in the usb cable to the phone and i disconect it, it will remain with S/W upgrade screen for a few seconds before turning itself off. I cant turn it on by the power button.
chulex67 said:
I think the phone was rooted i really dont know i think they were trying to update the system. I tried the Soft Reset Nothing happens, I think its not charging anymore it will only turn on when i connect the Usb cable. I tried removing the battery for 10 mins and tried again all steps. My Problem its that the pc Detects that theres an Usb, but it wont recognize it.
After i plug in the usb cable to the phone and i disconect it, it will remain with S/W upgrade screen for a few seconds before turning itself off. I cant turn it on by the power button.
Click to expand...
Click to collapse
And sft does not work? Eventhough your phone is in SW mode already?
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
And sft does not work? Eventhough your phone is in SW mode already?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I mean, the only freaking thing that wont work its that my pc and laptop detect when i connect the Cable to the phone, but it Wont Recognize The Usb and when i enter the SFT theres no Communication Driver. Like i said i have downloaded old and new ones Usb Drivers for the LG but it still wont detect it.
chulex67 said:
Yeah, I mean, the only freaking thing that wont work its that my pc and laptop detect when i connect the Cable to the phone, but it Wont Recognize The Usb and when i enter the SFT theres no Communication Driver. Like i said i have downloaded old and new ones Usb Drivers for the LG but it still wont detect it.
Click to expand...
Click to collapse
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I had similar Problem when using a 64bit-os. if so, try to reboot with disabled check for Driver-signature.
Just press F8 during bootup. if you get a promt fo selecting boot-device, press enter and quickly hit F8 again.
when System is booted remove the Batterie, press and hold vol+ and connect to usb (Batterie is still removed)
now my OB was detected with S/W Upgrade Mode
N00BY0815 said:
And if you connect it to the PC normally?
Does your device manager show nothing at all, or does it maybe show unknown devices and you only have to install the drivers manually?
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
It says Usb Device Not Recognized, Unknown Device, One of the Usb Devices has Malfunctioned and Windows Does not Recognize it.
I have tried to Install Usb Drivers and everything and The pc Still Recognize the Phone. The SFT has no comunication Device because the pc its not recognizing the usb so i cant do ****. xD
Z3Rr0_C0ol said:
I had similar Problem when using a 64bit-os. if so, try to reboot with disabled check for Driver-signature.
Just press F8 during bootup. if you get a promt fo selecting boot-device, press enter and quickly hit F8 again.
when System is booted remove the Batterie, press and hold vol+ and connect to usb (Batterie is still removed)
now my OB was detected with S/W Upgrade Mode
Click to expand...
Click to collapse
Nope, Didnt work i even uninstalled the Drivers and Reinstalled both old and new usb drivers for the phone and rebooted each time to see if it worked. Same problem. Dont know if this is important but the S/W update screen appears without pressing the Vol+ or Vol - or both.
chulex67 said:
Nope, Didnt work i even uninstalled the Drivers and Reinstalled both old and new usb drivers for the phone and rebooted each time to see if it worked. ...
Click to expand...
Click to collapse
Are You sure you disabled Driver Signature Enforcement.
this must be done every reboot you do or your phone will not be recognized in S/W Upgrade Mode. After flashing with SFT it is not needed. Only for flashing in S/W Upgrade Mode.
The currently available drivers work fine with x64...
I never used SFT on x86, and I never had a problem. I didn't even need to disable driver's signature enforcement, ever.
What's weird here is that his phone boots in to S/W upgrade mode without any key press. It seems to me that now you got there a flashlight...lol

Categories

Resources