Related
How is one supposed to get out of a bootloop while loaded in a slot on safestrap? It only loops and never gives me a chance to load SS.
I recently took the update and was able to retain root. I am one of the few that it went from .51 to .54 and said failed update. luckily I was able to flash back to the original software and start over. So now for the time being I'll be staying with the ability to fxz back to stock and forgo the camera update.
So the real question is, how do you get out of a bootloop when your on a safestrap slot and you don't have the ability to flash back to stock because you took the update? @Hashcode
Sent from non rooted motoX :'(
matt99017d said:
How is one supposed to get out of a bootloop while loaded in a slot on safestrap? It only loops and never gives me a chance to load SS.
I recently took the update and was able to retain root. I am one of the few that it went from .51 to .54 and said failed update. luckily I was able to flash back to the original software and start over. So now for the time being I'll be staying with the ability to fxz back to stock and forgo the camera update.
So the real question is, how do you get out of a bootloop when your on a safestrap slot and you don't have the ability to flash back to stock because you took the update? @Hashcode
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
I'm assuming your non rooted motox sig is not accurate anymore lol. But I would take your question to rootzwiki. That seems to be where hashcode is doing his discussion and where others are posting questions who are in bootloops etc. You will probably get a better response. But if you can get to fastboot you should be able to flash recovery back on there and sort it out I think. But i haven't been keeping up with SS too much. I think i read some stuff over there about that though.
http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v36x/
jayboyyyy said:
I'm assuming your non rooted motox sig is not accurate anymore lol. But I would take your question to rootzwiki. That seems to be where hashcode is doing his discussion and where others are posting questions who are in bootloops etc. You will probably get a better response. But if you can get to fastboot you should be able to flash recovery back on there and sort it out I think. But i haven't been keeping up with SS too much. I think i read some stuff over there about that though.
http://rootzwiki.com/topic/104161-recovery-locked-safestrap-recovery-v36x/
Click to expand...
Click to collapse
I flashed recovery first and tried to boot. No luck. Then I flashed back via rsd lite ( luckily ) and I'm back to being rooted.
Sent from non rooted motoX :'(
matt99017d said:
I flashed recovery first and tried to boot. No luck. Then I flashed back via rsd lite ( luckily ) and I'm back to being rooted.
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
next time just flash the system.img as well and you should have been good to go without losing any data.
Hello. I have an AT&T stock non-rooted and I accepted the recent OTA update to KitKat. I'm now wondering if it's too late to ever get root access using SlapMyMoto. I've searched around and can't find an answer. Can anyone point me in the right direction?
Thanks!
colgate1974 said:
Hello. I have an AT&T stock non-rooted and I accepted the recent OTA update to KitKat. I'm now wondering if it's too late to ever get root access using SlapMyMoto. I've searched around and can't find an answer. Can anyone point me in the right direction?
Thanks!
Click to expand...
Click to collapse
The thread in development will give you step by step instructions ( though, the impactor portion isn't explained but a link Is provided)
You can still root even if you are on 4.4, but need to return to stock first.
http://forum.xda-developers.com/showthread.php?t=2538896
Moto X rocking 4.4
Stock confusion!
My confusion was that I though I was on stock if I accepted the OTA update and that would make it too late. I (think) I understand now - I need to return to a previous version and then go through the process outlined in the development section.
Thanks again for the swift response!
I'm a little bit stupid to understand the return stock process. It's the same a stock via RDslite than a reset factory default? First, what means stock???
jportnoy said:
I'm a little bit stupid to understand the return stock process. It's the same a stock via RDslite than a reset factory default? First, what means stock???
Click to expand...
Click to collapse
A factory reset in the context of phones is a little bit misleading, more like an expression of a state of being rather than a literally one... It's actually just a wipe to a "fresh" state. So, if you have 4.4 on your phone and do a "factory reset" then you will still be on 4.4... Just without any of your data... Like if it had just been bought.
When someone says "return to stock" this to can have a few different meaning... In this case it's to the stock firmware (which actually isn't even the original stock, it's just the furthest back we can currently go and the closest to "stock") stock being what the phone originally came with from the manufacturer.
I hope I explained that in an understandable way... Had a early thanks giving feast with the in-laws and I'm drunk on Turkey and hef.
AT&T Moto X rocking rooted 4.4
I need some help. My phone is capable of booting into fastboot mode, but doesn't seem to be able to boot normally.
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
doctor_evil said:
I need some help. My phone is capable of booting into fastboot mode, but doesn't seem to be able to boot normally.
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
Click to expand...
Click to collapse
In the fastboot screen whats version is your booloader ?
Sent on my Gummy running Lenoto X
looks to be the one that I shouldn't have installed the OTA update. why in the F would they send me an update that isn't compatible with my bootloader version?
Well they're getting it back for a repair, I didn't pay 399 for a developer edition phone just to have a dang paperweight because they sent me an incompatible OTA update.
doctor_evil said:
looks to be the one that I shouldn't have installed the OTA update. why in the F would they send me an update that isn't compatible with my bootloader version?
Well they're getting it back for a repair, I didn't pay 399 for a developer edition phone just to have a dang paperweight because they sent me an incompatible OTA update.
Click to expand...
Click to collapse
They didn't send you a incompatible boot loader, the ota's always come with a new boot loader, so what I like to know is, what version is your boot loader , its Motorola's fault that you accepted the ota while having a custom recovery, had you read my thread here http://forum.xda-developers.com/showthread.php?t=2639102
You wouldn't have any issues.
If you don't want my help, thats fine by me, getting tired of this ota crap anyways
Sent on my Gummy running Lenoto X
Clearly you don't really want us to help or you would have answered the previous posters question. You also gave no details into if you had rooted the phone or unlocked the bootloader.
From the bootloader screen select the "factory" option.
I may agree with the op here. Moto supplied me with a 4.4 version for my dev ed. If I take an update, have an issue and moto still only provides 4.4 sbf what a I supposed to do?
However, OP you do need to supply more information as we can only speculate as to what your issue is.
Sent from my SM-P600 using Tapatalk
edthesped said:
I may agree with the op here. Moto supplied me with a 4.4 version for my dev ed. If I take an update, have an issue and moto still only provides 4.4 sbf what a I supposed to do?
However, OP you do need to supply more information as we can only speculate as to what your issue is.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Its not moto's fault, its up to the user to make sure you read the sticky notes, read the threads and search, moto puts out the ota for unrooted users.
Sent on my Gummy running Lenoto X
flashallthetime said:
Its not moto's fault, its up to the user to make sure you read the sticky notes, read the threads and search, moto puts out the ota for unrooted users.
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
However I purchased a Dev Ed phone. Motorola supplied me with a recovery firmware to restore my device to stock. I therefore expect the Factory supplied firmware to not brick my phone. If Motorola makes changes in an update that would cause previous versions of their software to damage phones when used as supplied Motorola needs to bear some of the responsibility. They can build a failsafe into the update that would prevent an attempt of a downgrade, supply upgrades that can safely be downgraded, add some kind of notification or not market "Dev Ed" phones for mass consumption.
Sent from my SM-P600 using Tapatalk
But the update clearly and concisely says, YOU CANNOT roll back to a previous firmware after applying said update.
Onus is on the user at that point.
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Tx Redneck said:
But the update clearly and concisely says, YOU CANNOT roll back to a previous firmware after applying said update.
Onus is on the user at that point.
Click to expand...
Click to collapse
Does it? I never saw that going to 4.4. As long as they put a new sbf up all should be fine.
Sent from my SM-P600 using Tapatalk
---------- Post added at 06:44 PM ---------- Previous post was at 06:43 PM ----------
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
Did you call Motorola?
Sent from my SM-P600 using Tapatalk
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
UPDATE:
I tried again to select the factory option in fastboot and unlike the previous times I had tried, this time seems to have fixed it. It booted up into Android OS. I think I'll try the OTA once again and see if this time is more successful, as if it screws up again I have a repair rma number and a fedex shipping label, but hopefully it does better this time.
doctor_evil said:
UPDATE:
I tried again to select the factory option in fastboot and unlike the previous times I had tried, this time seems to have fixed it. It booted up into Android OS. I think I'll try the OTA once again and see if this time is more successful, as if it screws up again I have a repair rma number and a fedex shipping label, but hopefully it does better this time.
Click to expand...
Click to collapse
ok OTA successful this time.
does anyone know if it's possible to boot the moto-x off a custom recovery using fastboot like we could for the galaxy nexus? I'd like to get root reinstalled but I don't want to mess with the current recovery, which should help I would think in regards to being able to install OTA updates without major issues.
doctor_evil said:
I have version 30.B2 according to the fastboot.
and I had originally flashed my phone with TWRP custom recovery and had rooted my phone. I used rsdlite to flash back to the current stock version then when after setting up wireless,etc. on my phone I checked for the OTA and it said that there was a new version that fixed battery issues,etc. so I downloaded it, then restarted. after it finished flashing and rebooted again is when the flashing android red triangle error message started happening. I tried to flash back to the previous stock version, and even tried re-flashing twrp custom recovery so I could go in and do a factory wipe and clear dalvik and cache, and data but nothing worked.
Click to expand...
Click to collapse
Maybe try this out.. option 2 http://forum.xda-developers.com/showthread.php?t=2446515
doctor_evil said:
ok OTA successful this time.
does anyone know if it's possible to boot the moto-x off a custom recovery using fastboot like we could for the galaxy nexus? I'd like to get root reinstalled but I don't want to mess with the current recovery, which should help I would think in regards to being able to install OTA updates without major issues.
Click to expand...
Click to collapse
Unfortunately, I don't believe it's possible to fastboot boot recovery. It's how I did everything with my Galaxy Nexus and Nexus 7. I was disappointed to find out it isn't possible with the Moto X Dev edition even though I didn't buy one.
nhizzat said:
Unfortunately, I don't believe it's possible to fastboot boot recovery. It's how I did everything with my Galaxy Nexus and Nexus 7. I was disappointed to find out it isn't possible with the Moto X Dev edition even though I didn't buy one.
Click to expand...
Click to collapse
has anyone tried it with the google play edition of the moto-g? I'm wondering if there is a way to convert from a regular retail rom over to a GPE rom for the moto-x after google starts selling it. I remember reading about them going to sell a GPE of it. Hopefully the GPE rom would be friendlier than the retail rom
doctor_evil said:
I am seeing the android laying on it's side with a red triangle with an exclamation point, this keeps blinking on and off. I've tried using rsdlite as well as the flash back to stock options in the moto-x toolkit and nothing is working. I've also cleared the cache and userdata folders but nothing has worked.
Is there a way to fix this or will I need to send my phone back to motorola for a repair?
Click to expand...
Click to collapse
I know you have fixed this now, but if you see the android with the red triangle and ! use the key combination pwr & up vol. That gets you into stock recovery and from there you should be able to boot up.
I have a Moto X Developer Edition rooted on Verizon with TWRP 2.6.3.1 and stock Android 4.4 on it. I have been trying to upgrade to 4.4.2 without doing the OTA, and without having to reflash TWRP.
So far, I have been unsuccessful.
I have tried Blur_Version.140.45.5.ghost_verizon.Verizon.en.US.zip (approximate file size 150MB) from multiple sources as all the posts I read keep saying that is what works. I have also tried a ~650MB version I found somewhere. In addition, I tried the upgrade located here: sbf.droid-developers.org/phone.php?device=0 which is called VZW_XT1060_4.4.2-KXA20.16-1.25.2_CFC_1FF.xml.zip (It's the 4.4.2 upgrade listed under Verizon US).
All of these fail. In TWRP, about 2-3 steps after it verified md5, it simply says "Failed" with no explanation as to why.
Here is my question:
How can I upgrade to 4.4.2 without a data wipe, and without having to reflash TWRP?
I have no interest in going to a ROM, I want to stay stock, and if I must, I will reflash the recovery if I have to, but I *really* don't want to.
Flash stock recovery, take the OTA, flash TWRP again.
It's so simple, so painless, so quick and it will not wipe your data.
tcrews said:
Flash stock recovery, take the OTA, flash TWRP again.
It's so simple, so painless, so quick and it will not wipe your data.
Click to expand...
Click to collapse
I was hoping to avoid that (Yep, I really am that lazy...) but that's what I was going to do tonight if I couldn't get my hands on a .zip to flash.
Ironically, I bought the Dev Edition specifically so things like this would be easy.
It is easy.....just need to do it.
I support my sister, her husband and my wife (as well as my own) who all have Moto X's. 2 seconds to flash recovery, however long it takes for the OTA to install and reboot and then 2 seconds to flash TWRP again. Heck...I'd just leave the stock recovery in place since it's not needed if you don't plan on flashing any ROMs. The OTA doesn't even remove root.
tcrews said:
It is easy.....just need to do it.
I support my sister, her husband and my wife (as well as my own) who all have Moto X's. 2 seconds to flash recovery, however long it takes for the OTA to install and reboot and then 2 seconds to flash TWRP again. Heck...I'd just leave the stock recovery in place since it's not needed if you don't plan on flashing any ROMs. The OTA doesn't even remove root.
Click to expand...
Click to collapse
Oh, that last bit is good to know! Well, I think even if it did remove root, getting it back is easy on the DE.
I think you're right though, I probably won't install TWRP again, I specifically got the Moto X because I was tired of messing around with stuff when I all I want is a rooted, stock Android experience.
So, after several hours of messing with this, and thinking the stock recovery had gotten messed up because the instructions I had for getting in to it were wrong, I finally got the OTA installing...
and it fails.
I don't know why, I haven't seen the error (I'm not looking at the phone when it fails).
So... Awesome.
Taegost said:
So, after several hours of messing with this, and thinking the stock recovery had gotten messed up because the instructions I had for getting in to it were wrong, I finally got the OTA installing...
and it fails.
I don't know why, I haven't seen the error (I'm not looking at the phone when it fails).
So... Awesome.
Click to expand...
Click to collapse
Are there files out so you can just flash 4.4.2 with mfastboot? Would be easiest.
kj2112 said:
Are there files out so you can just flash 4.4.2 with mfastboot? Would be easiest.
Click to expand...
Click to collapse
I assume so, but I haven't found any instructions specifically saying how to do that, except for the ones that tell you how to return to stock without using RSD Lite.
Unfortunately, I don't know enough about how all this stuff works to be able to figure out which bits and pieces to put together to get upgraded without wiping my data.
What really pisses me off is that I specifically bought this phone so I wouldn't have issues like this, and here I am...
BTW: The only thing the error says is "Error". That's it, nothing else.
Taegost said:
I assume so, but I haven't found any instructions specifically saying how to do that, except for the ones that tell you how to return to stock without using RSD Lite.
Unfortunately, I don't know enough about how all this stuff works to be able to figure out which bits and pieces to put together to get upgraded without wiping my data.
What really pisses me off is that I specifically bought this phone so I wouldn't have issues like this, and here I am...
BTW: The only thing the error says is "Error". That's it, nothing else.
Click to expand...
Click to collapse
This guide has a return to stock section. It will tell you how to flash the stock firmware.
http://forum.xda-developers.com/showthread.php?t=2603358
Unfortunately the moto x is not a simple phone for tinkering with, like say a nexus, even the dev edition.
It can be easier once you do fully understand everything. Just gotta know what applies to you...meaning mostly the locked versus unlocked methods for everything.
After owning an s2, a moto x and now an n5 (n7 too...but I don't tinker with it really....its a family device) I've come to the mind set that for flashers and rooters.....nothing at all beats owning a nexus. Every other device has some limitations that a nexus won't have.
kj2112 said:
This guide has a return to stock section. It will tell you how to flash the stock firmware.
http://forum.xda-developers.com/showthread.php?t=2603358
Unfortunately the moto x is not a simple phone for tinkering with, like say a nexus, even the dev edition.
It can be easier once you do fully understand everything. Just gotta know what applies to you...meaning mostly the locked versus unlocked methods for everything.
After owning an s2, a moto x and now an n5 (n7 too...but I don't tinker with it really....its a family device) I've come to the mind set that for flashers and rooters.....nothing at all beats owning a nexus. Every other device has some limitations that a nexus won't have.
Click to expand...
Click to collapse
Yeah, that's the page I was talking about when I said I found the full instructions...
I specifically bought this phone because I didn't want to mess around with it like this, I just wanted to root it so I could use Titantium Backup and be done with it... and now I'm stuck at a halfway point.... Again...
I'll probably end up just doing the full wipe and manually flash to 4.4.2 (RSD Lite doesn't see my device... yay), since I have gone from my mute button not working (with 4.2.2), to a really bad echo for whomever I'm talking to when it's on speakerphone (Even when speakerphone is muted... THAT made for a fun conference call...).
Taegost said:
Yeah, that's the page I was talking about when I said I found the full instructions...
I specifically bought this phone because I didn't want to mess around with it like this, I just wanted to root it so I could use Titantium Backup and be done with it... and now I'm stuck at a halfway point.... Again...
I'll probably end up just doing the full wipe and manually flash to 4.4.2 (RSD Lite doesn't see my device... yay), since I have gone from my mute button not working (with 4.2.2), to a really bad echo for whomever I'm talking to when it's on speakerphone (Even when speakerphone is muted... THAT made for a fun conference call...).
Click to expand...
Click to collapse
Flashing stock and rooting on an unlocked Moto x is basically the same as a nexus. It really is simple, once you are familiar with fastboot.
I guess there are toolkits that automate everything....like Samsung's Odin, and there's a few for nexus....but it really doesn't help anyone learn. And that's kinda what this hobby is all about.
But, I am sorry you're having trouble. Not sure what else to add. The guides are there, and they work. Usually. I can't think of anything to add to whats already been said.
Hope it works out for you!
kj2112 said:
Flashing stock and rooting on an unlocked Moto x is basically the same as a nexus. It really is simple, once you are familiar with fastboot.
I guess there are toolkits that automate everything....like Samsung's Odin, and there's a few for nexus....but it really doesn't help anyone learn. And that's kinda what this hobby is all about.
But, I am sorry you're having trouble. Not sure what else to add. The guides are there, and they work. Usually. I can't think of anything to add to whats already been said.
Hope it works out for you!
Click to expand...
Click to collapse
I don't think I'm articulating my issue properly. I understand how to do everything in the guides you mentioned, they're a piece of cake. That doesn't solve my problem.
My problem is that I want to get to 4.4.2 WITHOUT wiping my data, but can't do the update via OTA or flashing in recovery. RSD Lite doesn't work either.
The ONLY option I have available to me is to manually push the update with fastboot, which I can definitely do with the instructions provided... But those instructions require me to wipe my data.
I know it's possible to apply the update with fastboot without requiring me to wipe my data, but I don't know enough about the inner workings to know which steps to skip, and which need to be modified, in order to make that happen.
Taegost said:
I don't think I'm articulating my issue properly. I understand how to do everything in the guides you mentioned, they're a piece of cake. That doesn't solve my problem.
My problem is that I want to get to 4.4.2 WITHOUT wiping my data, but can't do the update via OTA or flashing in recovery. RSD Lite doesn't work either.
The ONLY option I have available to me is to manually push the update with fastboot, which I can definitely do with the instructions provided... But those instructions require me to wipe my data.
I know it's possible to apply the update with fastboot without requiring me to wipe my data, but I don't know enough about the inner workings to know which steps to skip, and which need to be modified, in order to make that happen.
Click to expand...
Click to collapse
It says right at the bottom of the return to stock section in the guide I linked too.....you can skip
Fastboot erase user data
fastboot erase cache
Though if you have any problems after, you might have to do it again and do erase those, before spending time trying to figure out what's wrong.
kj2112 said:
It says right at the bottom of the return to stock section in the guide I linked too.....you can skip
Fastboot erase user data
fastboot erase cache
Though if you have any problems after, you might have to do it again and do erase those, before spending time trying to figure out what's wrong.
Click to expand...
Click to collapse
Wow... Attention to detail -5
Sorry about that, when I looked through that article, I skimmed through and saw that the "Return to Stock" section was (almost) identical to the other instructions I was reading...But I missed that last paragraph when I looked at the link you provided, the directions I was using referenced that article but did not include that last bit...
Thank you for your patients, I feel like a dumbass now *sheepish grin*
Taegost said:
Wow... Attention to detail -5
Sorry about that, when I looked through that article, I skimmed through and saw that the "Return to Stock" section was (almost) identical to the other instructions I was reading...But I missed that last paragraph when I looked at the link you provided, the directions I was using referenced that article but did not include that last bit...
Thank you for your patients, I feel like a dumbass now *sheepish grin*
Click to expand...
Click to collapse
No worries!! .
And sorry, its userdata. My keyboard split the words up.
---------- Post added at 11:16 AM ---------- Previous post was at 11:15 AM ----------
And, you may very well have issues doing that way. But its worth a shot first. If you do have issues, then you can erase those and repeat the process.
if using fastboot/mfastboot, I would still erase cache, as it doesn't touch your data/apps/config.
Another tip, use this mfastboot -> http://mark.cdmaforums.com/X-STUFF/Mfastboot-4.4.zip
or you can use RSDlite to flash the SBF, but there is a corresponding line for "erase data"
Two helpful links that will help explain what you saw...
Taking the OTA -> http://mark.cdmaforums.com/MotoX-OTA.html
various ways to Return to stock -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html
kj2112 said:
No worries!! .
And sorry, its userdata. My keyboard split the words up.
---------- Post added at 11:16 AM ---------- Previous post was at 11:15 AM ----------
And, you may very well have issues doing that way. But its worth a shot first. If you do have issues, then you can erase those and repeat the process.
Click to expand...
Click to collapse
Alrighty, well I was able to successfully flash to 4.4.2 using the Fastboot instructions. Flashed TWRP afterwards and got root right back. Now that I know, this won't be a trial in the future (fingers crossed!)
Thanks for your help and patience
Even after a year on Android, I'm quite the novice, so please bear with me. So, I rooted my Moto X '14 using CF Autoroot because it was so easy. But, I had no idea how to unroot. So I googled some stuff and I attempted to flash back to total stock rooted rom and recovery. Foolishly, I picked the option to not wipe. So, when it rebooted, it went to the boot screen and crashed.
After trying everything, I realized I had no choice and did an external reset. So, hello 2014 because I'm back on KitKat but still was rooted. After looking around, I realized I can 'unroot' by pressing the option on SuperSU. But, I think all I did was revoke root access because on the bootloader, it still says modified.
I tried to go back to lolipop, but every time I take the OTA, the install crashes, but my phone works fine. So, what I wanna know is how I can go back to stock. Is it easy as flashing as flashing a 5.0 factory image? Or is there more I have to do?
bump
Ownage516 said:
Even after a year on Android, I'm quite the novice, so please bear with me. So, I rooted my Moto X '14 using CF Autoroot because it was so easy. But, I had no idea how to unroot. So I googled some stuff and I attempted to flash back to total stock rooted rom and recovery. Foolishly, I picked the option to not wipe. So, when it rebooted, it went to the boot screen and crashed.
After trying everything, I realized I had no choice and did an external reset. So, hello 2014 because I'm back on KitKat but still was rooted. After looking around, I realized I can 'unroot' by pressing the option on SuperSU. But, I think all I did was revoke root access because on the bootloader, it still says modified.
I tried to go back to lolipop, but every time I take the OTA, the install crashes, but my phone works fine. So, what I wanna know is how I can go back to stock. Is it easy as flashing as flashing a 5.0 factory image? Or is there more I have to do?
Click to expand...
Click to collapse
Just flash system and the root will be gone. Also, if you have other mods like TWRP or different modem the OTA won't install, so in order to get the latest update just flash all the files
Good luck
juliospinoza said:
Just flash system and the root will be gone. Also, if you have other mods like TWRP or different modem the OTA won't install, so in order to get the latest update just flash all the files
Good luck
Click to expand...
Click to collapse
Man, this would've been so helpful a month ago, lol.
Ownage516 said:
Man, this would've been so helpful a month ago, lol.
Click to expand...
Click to collapse
Sorry. Usually I just browse the last 10 questions. And in this post I saw "bump" bit I didn't check that wasn't you who did it LOL.
juliospinoza said:
Sorry. Usually I just browse the last 10 questions. And in this post I saw "bump" bit I didn't check that wasn't you who did it LOL.
Click to expand...
Click to collapse
Haha, it's all good. I just didn't know how that other dude dug this up.