Database Develop

[Q] brick!!!!!! :..(

ok guys so i have bricked my phone...i searched this forum and i have found out that you can use SEUS and...i tried...everything went well...and then at the end of update procedure i said some error about phone battery not charged...now when i connect my phone to pc or to charger or if i just want to turn it on the only thing i se is a warning sing (a rechtangle with a ! inside) and phone next to it...what should i so

sharpshilo said:
ok guys so i have bricked my phone...i searched this forum and i have found out that you can use SEUS and...i tried...everything went well...and then at the end of update procedure i said some error about phone battery not charged...now when i connect my phone to pc or to charger or if i just want to turn it on the only thing i se is a warning sing (a rechtangle with a ! inside) and phone next to it...what should i so
Click to expand...
Click to collapse
try with flashtool: http://forum.xda-developers.com/showthread.php?t=986697
download a firmware from here: http://forum.xda-developers.com/showthread.php?t=875688

sharpshilo said:
ok guys so i have bricked my phone...i searched this forum and i have found out that you can use SEUS and...i tried...everything went well...and then at the end of update procedure i said some error about phone battery not charged...now when i connect my phone to pc or to charger or if i just want to turn it on the only thing i se is a warning sing (a rechtangle with a ! inside) and phone next to it...what should i so
Click to expand...
Click to collapse
Use flashtool

ok i will try and ill leave the result here

oke so i have tried it and it always says error flashing files when he is right about to finish flahing system.sin

Have u tried with pc companion? Could be different with seus?
Sent from my E15i using Tapatalk

I think your battery is empty. Tried another battery?
Sent from my X8 using XDA App

sharpshilo said:
ok guys so i have bricked my phone...i searched this forum and i have found out that you can use SEUS and...i tried...everything went well...and then at the end of update procedure i said some error about phone battery not charged...now when i connect my phone to pc or to charger or if i just want to turn it on the only thing i se is a warning sing (a rechtangle with a ! inside) and phone next to it...what should i so
Click to expand...
Click to collapse
i think ur battery is drained out,try another

ok solved my battery was not empty...my pc sucks so i tried another pc and it all went well with pcc ) thx for helping

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

Bricked phone ?!!

Hello everyone ! Two days ago I wanted to flash the stock firmware on my S6500D and the pc restarted when I was flashing the recovery.img I think..and now the phone shows only the Samsung logo ( but very very veeery low-quality resolution ) with some lines in right, how can I repair it..?

ye, it's a brick. I had the same problem when I bricked mine. At first it had corrupted graphics, after some minutes it didn't boot at all.

There's no way to reflash it..? Without replacing the motherboard , I mean..using the software side.

JTAG

deleted

man, try do self jtag, watch on youtube videos etc, its simply and not expensive and it can repair your phone. if it cant help, just go to mobile center for new board

Fallen_Knight said:
what happened to your phone before flashing stock?
Click to expand...
Click to collapse
he said that the flashing process was interrupted, do you read?

deleted

i heard USBjig is working on our phone to force it in download mode.
maybe you should try it

tekkenl0rd13 said:
i heard USBjig is working on our phone to force it in download mode.
maybe you should try it
Click to expand...
Click to collapse
i read jtag also working on all galaxy family devices. try it, try.

I could give the device to a repair service ( GSMobile for me ) and they could repair it, but I don't want to give money for this device because the screen is also broken and I think in 2 months I'll buy a S3 Mini ( I love S3, belive me ) and if I find a way with a small amount of money to repair the phone I will do it ! But this jig..I also used some JIG for bricked PS3 but it's not the same way.. and I don't know a lot of things about making one for my phone, if you have a tutorial I will do it, but after I get the S3 Mini I'll surely repair this phone, I want to continue developing and searching and helping the other Mini2 owners, it is my first Android phone and it means very much to me.

JIG is only meant to force the phone into download mode. If the JIG works, your device is not hard bricked... Otherwise, I mean, if it is hard bricked, service center will take care of it. JTAG != JIG

I'll try to JIG tomorow , I'm using this tutorial : http://forum.xda-developers.com/showthread.php?t=1604707 , TheWhisp, the recovery.img file wasn't flashed totally, I mean it was about 60%..but the boot.img / system.ext4 ( I Think it was like that ) / other files were flashed with succes.. maybe the JIG will do it for me !

zalukajonet said:
i read jtag also working on all galaxy family devices. try it, try.
Click to expand...
Click to collapse
Thanks.

I've tried the USBJig but the phone doesn't responds in any way, it still remains off..

This should be posted in Q n A not in Android Development.

dei.andrei98 said:
I've tried the USBJig but the phone doesn't responds in any way, it still remains off..
Click to expand...
Click to collapse
bro try check all conections in jig. mayby there is some problem with pins.

LiskatFlow said:
This should be posted in Q n A not in Android Development.
Click to expand...
Click to collapse
There's no such section for Mini2
zalukajonet said:
bro try check all conections in jig. mayby there is some problem with pins.
Click to expand...
Click to collapse
I've tried all possible connections and sometimes the phones turns on ( I mean that the Samsung screen appears ) but sometimes nothing happen ( like when connecting PIN 4 to PIN 5 and this is the jig connection )

dei.andrei98 said:
There's no such section for Mini2
I've tried all possible connections and sometimes the phones turns on ( I mean that the Samsung screen appears ) but sometimes nothing happen ( like when connecting PIN 4 to PIN 5 and this is the jig connection )
Click to expand...
Click to collapse
my friend tell me something mayby usefull. push buttons to go to download mode and connect jig - in the same time. mayby it can help.

zalukajonet said:
my friend tell me something mayby usefull. push buttons to go to download mode and connect jig - in the same time. mayby it can help.
Click to expand...
Click to collapse
It's not working, if I enter in download mode by the buttons the screen shows only a white line, then I connect the jig and nothing happens, the screen remains the same..

dead phone !!

hello
a friend of mine has just installed Miui 4.2 and he was pretty cool with it ...
after few days he thought of installing an updated version of cwm on the phone ..
when he did so the phone died .. !!
it doesnt turn on anyway .. no smartflash .. no Upgrade Mode
not even charging !
is there anything i can do for him ?
Thanks
Regards

Did you check here? http://forum.xda-developers.com/showthread.php?t=1487105

Tried , Failed
phone doesnt even turn on

anyone for help ?!

BeBeLKhaN said:
anyone for help ?!
Click to expand...
Click to collapse
Check the battery before anything else, it may have been depleted completely

i charged the battery separately ... still nothing

BeBeLKhaN said:
i charged the battery separately ... still nothing
Click to expand...
Click to collapse
Hi, did you tried to connect in download mode without the battery (to smartflashtool)?

hi
yes i tried. but nothing...

BeBeLKhaN said:
hi
yes i tried. but nothing...
Click to expand...
Click to collapse
This is not a good news. Try to plug in the battery (be sure it is charged even a little bit), then push the power on and the vol-up button in the same time. Whait some seconds. Even if nothing suceed try again to connect the phone in download mode (with and without the battery).
I think it will not resolve the broblem..but try it anyway.
Good luck

help required with samsung t899m :(

Hi..
Facing this problem with my phone..have tried a lot of googling but couldnt find anything..was just able to install the drivers for qualcomm msm..phone is not going beyond this screen after starting..any help is appreciated..

Well, that's less bad than what happened to *my* T899M... Have you tried hitting the Windows button to start recovery, as the screen suggests? Alternatively, you may be able to do a boot-time hard reset (the kind done by holding some buttons - I forget which ones, but it's documented online - while turning the phone on) since you were able to get as far as the Windows bootloader.
Without knowing more about what in particular has died, I can't really help.

hitting windows button doesnt do anything. although i was able to enter into something by holding the vol up+ power..but dunno what to do after that..
hard reset doesnt work either..im not able to reach the "exclamation" screen.the phone just vibrates and goes looping the windows screen..

any suggestions please..?? seems like a paper weight in the making..

l2azoredge said:
any suggestions please..?? seems like a paper weight in the making..
Click to expand...
Click to collapse
First : start explaining when this happend ?
did you update the phone with the Cortana alpha firmware ? ( the last update on preview for developers)
if you did that then you can sent your phone back because there is no rom for your phone , only repair center can help you with that.

ceesheim said:
First : start explaining when this happend ?
did you update the phone with the Cortana alpha firmware ? ( the last update on preview for developers)
if you did that then you can sent your phone back because there is no rom for your phone , only repair center can help you with that.
Click to expand...
Click to collapse
this actually happened when my friend flashed ATIV's rom into this.. is there any way i can bring it back to life??

l2azoredge said:
this actually happened when my friend flashed ATIV's rom into this.. is there any way i can bring it back to life??
Click to expand...
Click to collapse
nope , only sent it back to Samsung or a Samsung repair center.