Hi,
After updating to Kitkat (4.4.2) on my One I have a strange, though not persistant problem. When I use the HTC headset for a phonecall, the speakers in the phone are turned on when I make the call. When I turn the speakers off, sound goes as expected through the headset.
Does anyone have similar problems - and maybe even a fix/workaround?
Best regards,
Lars
Related
Hey just tried connecting to my Blue ant supertooth light hands free.
it paired Ok but I have two problems when using it.
1. the hands free wont auot answer & i cant find if there is a setting on the diamond to set this.
2. when i receive a call as sson as i press the answer key it disconnects the phone from the hands free.
any ideas?
thanks
Peter
I had the same issue with other Win mobiles too. Maybe some issue with the windows to bluetooth?
I suspect so, but no one else has mentioned it in other posts
can anyone shed some light?
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
sunnycheng said:
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
Click to expand...
Click to collapse
No problems here pairing it with my car. Maybe a soft-reset can help?
Yea I'm having this issue with the Motorola i710 headset....only mine disconnects after about 4 minutes into a call....same other issues
I'm having problems too with Bluetooth headset/hands free... I'm using Dell BH200 headset which does stero wireless and hand free calling... When I dial numbers I can hear throught the headset, music plays fine through the headset, however it seems as soon as the phone connects/it goes into sleep it drops the headset and the small ear speaker in the handset works... Its annoying... I'm going to test with platronics hands free tomorrow...
Also, when I make a call, like a few seconds after it connects the phone's screen turns off... I thought it was only supposed to do this when you bring it up to your ear i.e. when light sensor in the ear speaker detects little light..?
sunnycheng said:
I don't have this issue at all, I am using Sony Stereo headsets right now.
The biggest issue for me right now is...after I finished using bluetooth, the phone will be muted until I soft reset. And this is relaly annoying!
Click to expand...
Click to collapse
I think I solved the problem with muting the phone after using bluetooth: using TF3d configuration tool I disabled the music tab. Now i use wm player for music and, during 1 day ,I had no problem - my phone is not going to mute anymore.Please try this method and post here the result. A lot of Diamond users have this problem and is few topics o the forum related to this.
After using a headset, the phone speaker for phonecalls won't work. I can use the loud speaker at the back of the phone, but not the ordinary speaker.
I got the speaker to work one time when taking the headset in and out of the phone (but not since, a week ago). Therefore I don't think the speaker is broken, but I'm not able to get it to work again.
Had the same problem on a Iphone (1.gen), but then I was able to get it to work again after pluging a headset in and out. Tried a lot of times with the SGS, but didn't help.
I tried to update the phone to JPX, didn't help
Just seams like the phone thinks the headset is plugged in even though it's not..
Any idea how to fix this?
When making calls there is button "Headset", try pushing that if it could help.
Thanks for answering. That button gives me the opertunity to connect a blutooth headset. Still no speaker sound..
I turn on the headset (wired or bluetooth) the phone ringing sound on speaker phone, it would be normal to hear only the handset.
WHY?
Please help.
igorficko said:
I turn on the headset (wired or bluetooth) the phone ringing sound on speaker phone, it would be normal to hear only the handset.
WHY?
Please help.
Click to expand...
Click to collapse
Huh what? I'm sorry I don't fully understand what you're saying. If you're saying that a ringing phone would only ring in the headset when it's connected, then I don't think that's what's happening. All my previous phones have rang through the speakerphone when a headset is connected.
Hi everybody. I have the t mobile moto x 32gb on ATT. Works great ..the best phone no questions. I have an older car with aftermarket JVC unit with bluetooth capabilities inluding A2DP(which works great by the way) but the microphone of the JVC is not good so I don't use it for phone calls. I had that issue before where after the phone being connected to the car and disconnected (when I leave the car) the sound is super low it shows max but it is not(the moto x has great crisp and loud sound both on the earpiece and the speaker), so I have to restart the phone and this will fix my issue..but since I am not using it much I was ok with it...Now I have a 2010 Prius with blueetooth handsfree calling but no A2DP(that is ok with me I can use the AUX). The microphone on the Prius is great people are saying they hear me great and so do I. But now I am facing that issue again..
Is anyone familiar with that ? It is really annoying that I leave the car where I was in a conversation with great sound I lock my car and walk on a busy street and cant here what people are saying no matter if I am using the speakerphone or the earpiece..I have to tell them that will call them back in a minute after I restart my phone.
PLEASE HELP !
THANKS
Anything ?
Try persist+ from play?
Bluetooth volumes have been haunted ever since 4.4. Hell... plugging in the charger when I am on my vehicle's bluetooth changes the volume.
Hoping this finally get this fixed in 4.4.3, but until then, I have found a number of tricks.
1.) There is a sweet spot on the volume scale (around 70%) that is best to leave it at.
2.) I haven't had to restart my phone... usually just cycling BT off and on again restores original volume. Sometimes even starting/stopping media playback fixes it.
I can confirm to have the same problem. Hope it'll be solved in next updates.
Hello,
I recently received moto g 2nd gen, and I noticed that during phone call, the sound comes out of the stereo speaker even if I did not press the speaker icon. And when I pressed the speaker icon, the sound gets really loud, depressed it and the sound still comes out of both speaker.
Somebody had encountered the same problem?
edit:
I tested it with headset connected and the voice still comes out of the speaker.
Thanks.