Related
Android 2.0 (Eclair) for CDMA Diamond (DIAM500)
Instructions
Put the files from my zip file (zImage, modules, startup.txt) in the root of your Internal Storage
From this xda post, download the latest XDANDROID build.
From the XDANDROID 7z file, extract system.sqsh, haret.exe, initrd.gz, calibration, conf/, media/, and (optionally) AndroidApps/ into the root of your Internal Storage
From stinebd's rootfs autobuild site, download the latest rootfs, rename it to rootfs.img, and put it in the root of your Internal Storage.
If you are updating from an earlier version of Android or just want to clear your settings, you can delete data.img from the root of Internal Storage.
Run haret.exe and boot
Notes
Touchscreen calibration values are stored in the ts-calibration file in the root of Internal Storage. To re-calibrate, delete the file and restart.
The "end call" button takes the phone in and out of sleep.
Android's "Menu" button is mapped to the top-left/Home button. The 5-way pad and the scroll ring both work.
Android's "Home" button is mapped to the power button on top of the phone.
Wi-Fi is working, although Linux sometimes crashes when WiFi is turned off.
If you want to try Android 1.6: From this Android build, extract haret.exe, initrd.gz, system.sqsh, calibration, calibration_diamond, and the AndroidApps/, conf/ and media/ directories into the root of your Internal Storage.
ChangeLog
3-23-2010:
Touchscreen double-tap issue should be gone, big thanks to eval- and especially bzo
HTC wired headset and 3.5mm headphones both work
3-8-2010:
Hardware 3D is re-enabled (accidentally disabled it)
3-6-2010 Update:
Bluetooth now works, big thanks to bzo
Touchscreen should be improved
Power-off now resets the phone instead of crashing
2-25-2010 Update:
When WiFi is turned off the phone shouldn't crash
2-19-2010 Update:
Power collapse now works, so power consumption should be much lower when the screen is turned off.
WiFi should work, as long as you use a new rootfs from stinebd's autobuild site. If you tried to use WiFi in the last ~2 weeks and it failed, WiFi still may not work with this new rootfs and kernel. See this post for solutions.
2-17-2010 Update:
Microphone works without having to make a call in WinMo
WiFi still isn't working, but I'll post a patched rootfs soon to fix it
2-10-2010 Update:
Hardware 3D acceleration is working under Eclair
Brought in makkonen's fixes for battery status--they're rough, but better than being stuck at 5% all the time
WiFi is not working at the moment, but I'll lean on the XDANDROID guys to get my fix in.
2-3-2010 Update:
Linux is now using much more of the phone's memory: 180MB vs. 103MB, thanks to some patches from the Hero and Droid Eris kernel source.
Touchscreen calibration is now supported with the Feb. 2 XDANDROID build, thanks to makkonen and phh.
1-27-2010 Update:
Stability should be much improved
A new touchscreen driver is included that is a big improvement over the old one, thanks to makkonen and phh. A calibration utility is coming soon. Until then, calibration is stored at the bottom of conf/eclair.user.conf, and you can put your WinMo calibration in there with this guide.
The USB product ID has been changed in the hope that ADB will work on Windows. Try it out and post back if it works.
1-22-2010 Update:
The power button (on top of the phone) is now mapped to Home, and holding it down will show apps running in the background
Sound, data, and WiFi should all be working
1-11-2010 Update:
Tested and working with Eclair
Deep sleep should be working better (use less power)
12-26-2009 Update:
Kernel improvements:
The speaker and earpiece now work (but not the microphone)
Screen backlight control works
Rootfs improvements:
Thanks to makkonen's RIL fix, cell data works in Android without having to end the connection in WinMo first
I made a change to /init that might help mjb94, hackman238 and others that have partitioned internal storage. If you were getting a "cannot mount" error on boot, let me know if this fixes it.
12-16-2009 Post
We do have a Google wave for Android--right now it's a cross between a wiki-status-report and chat room. I'm not sure how to give a link to a wave, but it's open to everyone and called "Android on HTC Windows Mobile Phones (Diamond, Raphael, Blackstone, Rhodium, Topaz)". If anyone wants a wave invite, PM me and I have a few to give out.
Enjoy Android, and if you need help or have questions, PM me or post here
Donations are greatly appreciated , or help finding an engineering job in San Diego!
thanks mr. pippy for all your work. my wife is happy that once the microphone works i wont want to buy a new phone!
wow
you are definately making progress on the diamonds android
Is there any chance of the mic working anytime soon? I know this isn't an fast paced process but I'm just so sick of wm.
Can someone invite me to Google Wave please?
my gmail account is mike.cgy
bdusmc said:
Can someone invite me to Google Wave please?
my gmail account is mike.cgy
Click to expand...
Click to collapse
I just sent you one.
Awesome - I got it... Thanks a lot!
Wow, you're getting a lot done in a short period of time, Thanks!
Will donate as soon as I can!
the boot stops on
"handhover: boot [htc_fb-1] -> real [ttyo]"
For the latest version, it will boot for me, but as soon as I have a 3g connection it seems to reboot any time I touch anything.
Boots up fine
Latest build boots up and seems to run fine for several hours but after playing with it, it seems to get more and more unstable. I went 10 hours with it plugged in sleeping and then unplugged it and used it moderately for about 3 hours before it crashed. Now it's crashed 3 times within minutes of each other. Good stuff though, can't wait until it's stable enough to use full time. Diamond has plenty of nuts to run it pretty good. Sure would be nice to have a dual boot phone. No reason to upgrade and get the best of both worlds...
giovesoft said:
the boot stops on
"handhover: boot [htc_fb-1] -> real [ttyo]"
Click to expand...
Click to collapse
I get the same error on my Raph500. I tried from the micro SD card and from the root of the fs.
giovesoft said:
the boot stops on
"handhover: boot [htc_fb-1] -> real [ttyo]"
Click to expand...
Click to collapse
rothgar said:
I get the same error on my Raph500. I tried from the micro SD card and from the root of the fs.
Click to expand...
Click to collapse
Sorry, my kernels are only tested on DIAM500. The RAPH500 mtype (set in startup.txt) is 2182, you should have better luck with that. Also, this thread is for RAPH800 but there may be some RAPH500 people there.
mr pippy i still get the same error as in your other post with the failed to mount sd and the 2 partions, i tried reformatting
mjb94 said:
mr pippy i still get the same error as in your other post with the failed to mount sd and the 2 partions, i tried reformatting
Click to expand...
Click to collapse
Did you reformat or repartition? Would you happen to be one of those people who has a partitioned card? Basically, I think the layout of your MC can have as many partitions as you want on it as long as mmcblkp1 (the first partition) is a fat32 partition with the needed files on it. There's also a little info on this problem on the wiki, lavender.t posted a solution that works 100% of the time if you're able to enter keystrokes.
Willis111 said:
Did you reformat or repartition? Would you happen to be one of those people who has a partitioned card? Basically, I think the layout of your MC can have as many partitions as you want on it as long as mmcblkp1 (the first partition) is a fat32 partition with the needed files on it. There's also a little info on this problem on the wiki, lavender.t posted a solution that works 100% of the time if you're able to enter keystrokes.
Click to expand...
Click to collapse
I simply in disk utility clicked on restore and erased the disk restoring with ms-dos fat
is there another way to do this. i have access to linux and osx not windows
it only shows i have one partition so idk!
no dice. heres what i have done
ok i restore the disk in to ms-dos fat
no dice
i repartiton with a scheme of one partition
no dice
i change the partiton table no dice
i tried lavaders thing but i couldn't get the keyboard to come up
there is a new android version called eclair 2.0 here http://forum.xda-developers.com/showthread.php?t=601751 .
i also formatted from the phone
Possible fix for microphone
I haven't tested this yet, but blast3r in irc tested a workaround for the microphone this morning and said it worked:
In WinMo, start a voice call and leave it connected while you open HaRET and boot into Linux. In Android, the microphone should now work for voice calls.
MrPippy said:
I haven't tested this yet, but blast3r in irc tested a workaround for the microphone this morning and said it worked:
In WinMo, start a voice call and leave it connected while you open HaRET and boot into Linux. In Android, the microphone should now work for voice calls.
Click to expand...
Click to collapse
Yep, confirmed for me. Made a phone call with android and could talk just fine. Probably can just call voice mail with win mobile and launch HaRET. Trying that right now.
Being relatively new with this sort of thing, I tried to follow cicada's thread to put adhoc wifi support for a STOCK (which obviously means unrooted) NC.
I get that now... but not before I tried this on my honeycomb rooted NC.
http://forum.xda-developers.com/forumdisplay.php?f=860
I followed the steps... but when I got to step
adb push wpa_supplicant.adhocfix /system/bin/wpa_supplicant
It responded "cannot stat 'wpa-supplicant.adhocfix: no such file or directory.
So, I
adb push wpa_supplicant.backup /system/bin/wpa_supplicant
Then I
adb shell mount -o remount,ro /dev/block/mmcblk0p5 /system
and... no wifi. Says: "unable to start WiFi" on the settings page.
This thing kinda becomes worthless without wifi access, and I now realize that the adhoc mention I was following was for stock NC's.
Does anyone have any idea how I can unwreck this thing?
Ooops... disregard. I tried step 6, and voila! wifi is back. Minor details...
Thanks for reading... and my lesson is learned. Pay attention to ALL the steps!
Just curious, do you have adhoc running now?
I'm running the Deeper Blue's HC v04 preview (flash'd to eMMC), and did the adhoc "upgrade" last night. I used the files that were posted for the v02 preview; brought it into work today, and it's just fine...lots of new networks showing up.
I'm running the CWR flashable version of honeycomb, and can't get the market to work. per the suggestion of others i've cleared the framework and market data and cache several times but still have had no sucess. rather than just not being able to download, Now i get an error has occured message try again later message. However, I am still able to use Gmail to send and recieve emails. Any suggestions?
So I reflashed and still have the same issue i'm able to download from the market for a very short time before losing downloading privileges. also gtalk is unable to connect but i still get gmail.
edit: now g services work, but i still don't see all apps.
I could use some help getting my bluetooth to work. I've tried several of the CM7 nightlys, their RC4, phiremod v5, v5.2, and v5.3. They all flash just fine, and work great, except when I try to turn on the bluetooth. When I go to the settings and try to turn it on, it just spends 30 seconds trying then goes back to having it off. I've flashed and re-flashed the system, and have read everything I can find, but don't know what I'm doing wrong.
My steps.
1) Downloaded 8gb_clockwork-0.1-ext4.tar.gz
2) Burned the contained img file to an sd card (used the dd command)
3) Copied system image to sd card (ie phiremod-nook-V5.3.zip)
4) Unmounted sd card and inserted it into my rooted nook
5) Turned nook on
6) Formated /system /data and /cashe
7) installed from sd card, selecting zipped image (ie phiremod-nook-V5.3.zip)
8) when complete, unmounted sd card
9) removed sd card
10) rebooted
11) it always fails to boot the first time, but works find after a restart.
Can anybody see what I'm doing wrong?
What works for me is pressing 'fix permissions' in rom manager then reboot and badabing.
Sent via Tehduck Uberdistro Encore RC4 n.33/Tapatalk Pro
luciferii said:
What works for me is pressing 'fix permissions' in rom manager then reboot and badabing.
Sent via Tehduck Uberdistro Encore RC4 n.33/Tapatalk Pro
Click to expand...
Click to collapse
That did the trick!, thank you very much luciferii
Just a note as I try to avoid "Fix Permissions" when possible-
Anyone with this problem MAY be able to turn bluetooth on by rebooting and enabling it as quickly as possible.
This seems to work most of the time for most people. Not always..
If not, fix permissions and a reboot does seem to take care of it the rest of the time.
rogerdugans said:
Just a note as I try to avoid "Fix Permissions" when possible-
Anyone with this problem MAY be able to turn bluetooth on by rebooting and enabling it as quickly as possible.
This seems to work most of the time for most people. Not always..
If not, fix permissions and a reboot does seem to take care of it the rest of the time.
Click to expand...
Click to collapse
Why would you avoid fix permissions? It just sets things to sane values.
As for me, the fix I heard and what worked for me was to turn off Wifi, Power off, power back on, turn on Bluetooth and let it init, then turn on Wifi. Now both will turn on.
khaytsus said:
Why would you avoid fix permissions? It just sets things to sane values.
Click to expand...
Click to collapse
Two reasons:
#1) While I am not afraid to mess with root access or abilities I also try to avoid doing so whenever I can. If I don't NEED to, I don't. Same way I work on my linux computers. And if I have done nothing to mess perms up they SHOULD be ok.
#2) I think the simplest fix is best, every time. (As long as it actually FIXES the problem, of course.)
If all that is actually NEEDED is a reboot and turning on bluetooth quickly, why do anything else?
HI everyone, i'm a Noob here sooo here goes:
I don't know why - but I installed CM9 Alpha 2 on my HP Touchpad and my wireless was working at the time of installation. After using it for a while then turning it off, and on again the wireless stopped working. I can see the wireless signals but when i click to connect it says "Connecting" then back to the wireless name and never connects. It came back, stayed on for a while...then when i reset it again this time to see if it would go off again - it hasn't come back since.
My question: Does anyone know what is going on? Am i missing something or doing something?
Thank you
Im having the same problem...
nightly 3/17
FWIW I have had the same problem occasionally when installing different builds but what seems to help is going into the WebOs and turning the WiFi off then on and then rebooting into whatever Android version I was using at the time. There is also a long thread covering this in the development section with thoughts on how to fix the problem.
bob
"I don't know why - but I installed CM9 Alpha 2 on my HP Touchpad and my wireless was working at the time of installation. After using it for a while then turning it off, and on again the wireless stopped working. I can see the wireless signals but when i click to connect it says "Connecting" then back to the wireless name and never connects. It came back, stayed on for a while...then when i reset it again this time to see if it would go off again - it hasn't come back since.
My question: Does anyone know what is going on? Am i missing something or doing something?"
No, you've done well...wifi has been a persistent issue with almost everyone. There are several ways to go about resolving it.
1) (from terminal emulator): enter su (hit return) then type the following....
rm (space) -rf (space) /data/misc/wifi (space) && (space) reboot
(Or if that doesn't work...)
(from root explorer): access /data/misc/wifi folder then long press wpa supplicant folder and select delete...confirm delete and reboot
Either of those methods from #1 should allow you to restore wifi but you'll probably have to repeat the process upon each reboot/restart of your TP. A more permanent resolution has been proposed by #2 below.
2) You can also look up Rohan's Supreme Mods v 1.3 (for CM9 Alpha 2) and flash that zip file over your current rom, but be sure to reboot into recovery and make a Nandroid backup before flashing the mod package.
:[MODPACK][3/10][NEW]SUPREME Mods v1.3 [Faster, Smoother, Faster Wifi, Better Battery]
http://forum.xda-developers.com/show....php?t=1519161
Make sure you select the mod package that matches your current DPI setting of your Alpha 2 rom and follow his install instructions to the letter.
Good luck!
flash these drivers. should do the trick if you're having wifi issues with the disconnect reconnects.
http://rootzwiki.com/topic/18332-new-wifi-driver-ath6kl-from-compat-wireless/
download the file and flash via Clockworkmod, do a nandroid backup first just in case something goes rogue.
another quick fix, toggle airplane mode. usually gets you back going again. As for rohan's mods, try this first. His mods won't help if you can't keep a stable wifi connection.
I'm having this problem also. Very frustrating! I will try all of this tomorrow and report back. Thanks.
Sent from my Kindle Fire using Tapatalk
This thread has a lot of useful fixes which might help.
editi guess sdcard is incorrect/confusing for my situation, it's the entire system up to root folders is stuck in a read-only type state.
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected]ost #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
plasticsoldier said:
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected] #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
Click to expand...
Click to collapse
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
plasticsoldier said:
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
Click to expand...
Click to collapse
I would suggest trying to restore down to WebOS 3.0. In that procedure you literally wipe EVERYTHING on the internal partitions in novaterm and start from absolute scratch. Therefore, if it a software issue you could solve the problem. However, if it is a hardware issue, you'd be kinda screwed.
Yeah, none of the methods I've ended up finding about this problem or other bricked problems are working at all.
i checked at work when i bought it, which of course the 11th was the year mark... but I do have android installed so even if i can get any chance of them honouring it so close they'll probably be like "oh you have android, that'll be $$$ for us to do anything. thanks!"
So I guess I now I have a paperweight with some features.
cdzo72 said:
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
There is a thread in the General forum about how to restore and downgrade. Have you tried that thread ? It is usually a great way to try and get that last restore before sending it back to HP.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
how are you adding and deleting files when in android? which version of android do you have installed? have you tried different rom versions? have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to? it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard? are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android? have you run "fix permissions"? Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
sstar said:
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
Click to expand...
Click to collapse
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
cdzo72 said:
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer, this would tend to suggest that the problem is software based corrupted or otherwise. I am trying to find a program that will allow me to read/format the Android partition on my windows computer and will let you know if come up with anything.
Regards
i guess i should change the title slightly.. it's not sdcard, but basically the entire touchpad contents. go to root and delete whatever i want and it doesn't matter. connect it and format with windows and it doesn't actually matter.
haxin said:
how are you adding and deleting files when in android?
Click to expand...
Click to collapse
i've added and deleted just by using mtp. i've also deleted the files on the android side with the video player (vplayer) i've installed es file explorer (which after restart is gone) and deleted with that. i've also gone into webos and installed internalz pro and deleted files that way, which it then seems to work until i of course do anything related to restarting.
some of the files i've put on, i've had it recognize briefly. so for the video file, start it, then it gets really choppy/glitchy playing it. so stop it, go back into the vplayer and it's back to the old stuff
which version of android do you have installed? have you tried different rom versions?
Click to expand...
Click to collapse
android version 4.0.3. nothing else will install. if i add files while in android, when i boot into cwm they are gone. if i mount usb in cwm and add them they stay briefly but when i try to flash them they fail.
have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to?
Click to expand...
Click to collapse
i have not tried adb yet, just not as familiar using it properly, i will give it a try though.
i am using windows 7 on my laptop currently. i do have a pc upstairs that i barely use that has vista, but i don't know how that would make a difference to the touchpad
it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard?
Click to expand...
Click to collapse
yeah as i put above i guess saying sdcard was a bit confusing/misleading (my bad, sorry!), i didn't really know what else to call it at the time or how to explain myself properly at first.
are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android?
Click to expand...
Click to collapse
i can move/delete/modify anything which has absolutely no effect to the device. i've used es file explorer and gone up to root and deleted everything and the system runs fine. says the system is empty with lots of free space (its the 32gb model) but restart or even go into recovery and everything is once again there.
have you run "fix permissions"?
Click to expand...
Click to collapse
i've run it a few times. just acts likes it's working and then says done. i've even gone into the mounts and storage in cwm and formatted sdcard/cache/data/system. does nothing at all in the end of things
Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
Click to expand...
Click to collapse
it was just something to try to get somewhere right. it never gets past 12%. always fails to reboot.
I am currently letting the battery drain and see if it dying and then being charged will do anything. probably not. but who knows. i talked to a "tech" on the chat support (i never mentioned android) who told me that having preware installed in webos causing it to become corrupt and they "don't knowledge of preware installed devices" exact words. no idea what that means haha don't have knowledge, don't acknowledge...
anyhow. i've not quite given up. i just don't really see it turning out any differently from the previous times. i do appreciate all the feedback and help very much though
ok so heres what I would try. First try flashing a new fresh rom. download one that you want to your computer like cm9 nightly or aokp or whatever you feel like. then boot into CWM recovery connect the touchpad to the computer via usb. then connect to the touchpad with adb. I'm not sure how to do this in windows because it's been so long since I've done it on a windows box, I always use linux.
adb has alot of options, you can move files to and from the device, you can uninstall or install app packages, and more. this way you can adb push the rom .zip to the touchpad's sdcard while youre in cwm recovery. this way you dont have to reboot the touchpad and risk having the file disappear, you can just go to 'install zip from sdcard' and then 'choose zip from sdcard' in cwm recovery after you adb push the rom, you should see it in the folder you pushed it to on the sdcard.
If you arent familiar with how to use adb from the command line or the terminal this might not make alot of sense and i dont know how better to explain it than that. Also yes windows 7 vs windows vista does make a difference there are issues with novacom installing properly, that's why you would have problems running acmeuninstaller or acmeinstaller2. if you look around you should find some videos or how to's that can probably explain it better. Hope this helps.
http://www.webos-internals.org/wiki/Novacom_with_Windows_7
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed-5.html
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
ve6ay said:
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
Click to expand...
Click to collapse
Probably the best suggestion yet given that everything else has been tried.
Good luck.
****EDIT****
Before you attempt the step above I have just noticed a difference between between cwm and. TWRP2.2 which I have installed on my Touchpad via goo manager. If I open recovery via goo manager and then select wipe it gives me 4 options cache, davlik, factory reset AND system which i think says will remove your rom . I don't see the forth option available with the regular cwm/clockwork. Just a thought.
All the best with whatever you try next.
sstar said:
Probably the best suggestion yet given that everything else has been tried.
Good luck.
Click to expand...
Click to collapse
this would work, however you have to fix you novacom/novaterm issues on your windows machine before you'll be able to do any of this. the reason acmeuninstaller, acmeinstaller2 arent working is likely because youre on a windows7 64bit box and Palm-sdk, the novacomd.exe, noverm.exe, and javaruntime apps and drivers arent setup right. just make sure you have the proper javaupdates on your computer then you can install preware in webos, preware has some nice tools that will delete the entire android install partitions, one is called 'remove android' and the other is called 'tailor' you run them from within webos. after you do that then in webos you should do a full device reset. you'll find it in the "info" tab under settings in webos. this will delete and reformat the whole /media ,(aka sdcard) partition. so you will lose all the files you have stored on both webos and android. that format will take a long time probably like 30 min or more. after thats done. reboot the hp and run webosdoctor. now i know for sure this will work because ive done it on mine. remember to put the touchpad in developer mode in webos first to install preware. you can do that by typing webos20090606 into the webos search bar and hitting enter. I'll put links from my box.com accou t to everything you need.
https://www.box.com/s/479acdb6ef9c99fc7b92
https://www.box.com/s/1aed4722990aad251570
edit: also I'm not sure if youre on the 16gig 32gig or 64gig pad, the webosdoctor that i linked is for 32gig wifi only US version. if thats not what you have then youll need to get the doctor for for specific touchpad. or you could create a webosmetadoctor but thats a whole nother project.
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
plasticsoldier said:
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Click to expand...
Click to collapse
ok no one will be able to help you fix this issue unless you give complete details of the problems. when you say " novacom/novaterm stuff doesn't work" we cant really help specific error details is what i need. I dont mind helping you fix this but you have to be a little more specific on exactly what,where, and how youre installing and running and mounting apps and directories.
your problem IS fixable but you need to slow down and really do things exactly step by step.
Ok so back to ./adb. now when you boot in to CWM recovery on he touchpad DONT do anything in CWM just plug it into the computer. do not mount it as a usb storage and dont mount or unmount the sd partition LEAVE IT.
you can then use ./adb from the command line or terminal on the computer to move the files to the touchpad' or install apk's uninstall apk's you name it. This will require that you know some linux terminal commands. for example to move a new rom zip to the internal sd card or into any other folder you can use ./adb push command to run a root shell on the android device itself you can use ./adb shell and then change folder and file properties from readonly to rw. this can all be done while the touchpad is patiently waitng in CWM recovery. this way when youre done installing or uninstalling apps from the device and moving flash zips to it, you can disconnect the .adb connection with ./adb disconnect or just type exit from the terminal till it closes. unplug it then you will be able to pick up the touchpad and install zip from the sdcard, keep in mind you dont want to choose 'apply u[date from sdcard' you want to use the 'install zip from sdcard option' you can read up more on how adb works. it is probally the most important part of hacking android.
with that being said. novaterm is the palm webos version of .adb. this is why when you boot into webos recovery to do things like acmeinstaller and acmeuninstaller2 the novaterm novacom and novacomd apps have to be installed correctly on the computer or else you wont be going anywhere fast. some screenshot examples of how it should appear below.
https://www.box.com/s/432e63a83215f00eea6a
https://www.box.com/s/970bc29542a05f98f036
https://www.box.com/s/63c0f656e8354f7f2d6a
https://www.box.com/s/cbe3266467ae8e3ebabe
https://www.box.com/s/005e56a61a178dd17fa4 some better resolution images.
Plasticsoldier said
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Yes there is
Firstly tailor does exist, it is a beta and the facility to dl must be enabled.
Read this and scroll down to Enabling beta test feeds and follow the instructions , when you get as far as using the Linux command you CAN copy and paste thank God.
http://en.m.webos-internals.org/wiki/Testing_Feeds?wasRedirected=true . After that reboot into Webos and launch preware. Go into managed feeds as per the instructions in the link above and install Tailor. Reboot again and the app will work. It looks very good actually.
But before attempting to actually use Tailor please read the article I have posted below it is only 7 pages long but will explain how to use Taylor properly as it is a powerful tool.
http://forums.webosnation.com/webos...partition-filesystem-editor-beta-testing.html
I have done all of this , this morning so if you have any problems pm me or ask in this thread.
I sincerely hope that this helps, it should be the answer to your problems.
@haxin: sorry, wasn't trying to be unhelpful when everyone is being helpful to me. I shall be more detailed in future responses. I think i was getting frustrated and had had a busy exhausting day so it didn't help me come across clearly/properly.
OK, so I had preware installed already, so I removed it, went into developer mode, used the linux commands, reinstalled preware, added Tailor.
(i've done this a few times, because I didn't remove the cable after doing the linux commands for preware, then i accidentally hit the wrong buttons and it connected to 'usb drive' mode and wouldn't connect on the pc side and got stuck on the "ow disconnected me properly next time" screen).
So it gives me the following options
USB (media)
Android (system)
Android (cache)
Android (data)
Unused Space
the 'usb media' starts mounted and will mount again if unmounted. If I use 'check filesystem' it'll pass. So then I try 'delete partition' which pretends to delete, then it takes me to the unused partition which is still at 16mb. so i try to use "check filesystem' again and it fails. try repair and it fails as well
I've tried mounting the android parts just to see, they just sit there processing that they are trying to mount. trying to delete or anything else fails as well.
and now after trying things, any of the 'cards' will try to open and just sit there grey. and with my usb cable not plugged in it still is giving me the option to enter usb drive mode. and with this i have to restart and go through the steps again of adding Tailor which is getting tedious.
I restarted, went through the motions to get back to Tailor. trying out resizing just to see how that goes. So far 15%. not sure what will happen when done, but we will see.
This is getting long, so i'll end this part and update on anything and also try to familiarize myself with adb a tad more