Hello guys
I have problems to flash MIUI, both primary and secondary rom
I have the error: "E: Error executing binary in zip updater"
I have tried to change the file updater-script in the zip, erasing the first line as suggested here, but had no result ... can someone help me?
Sorry for bad english ...
Related
Hey guys! First of all I'm sorry for the thread but I'm a bit desperate. At the moment I have OmniROM 4.3 installed which replaced CWM with TWRP. I'd like to install CM 11 but it gives me an error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '...'
Error flashing zip '...'
I have googled a bit and I found this thread, but it's a bit complicated for me: http://forum.xda-developers.com/showthread.php?t=2516253.
Is there any way to replace TWRP with CWM? (Except restarting everything with Odin)
I'd appreciate if you guys could help me out.
revoxis said:
Hey guys! First of all I'm sorry for the thread but I'm a bit desperate. At the moment I have OmniROM 4.3 installed which replaced CWM with TWRP. I'd like to install CM 11 but it gives me an error:
Code:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '...'
Error flashing zip '...'
I have googled a bit and I found this thread, but it's a bit complicated for me: http://forum.xda-developers.com/showthread.php?t=2516253.
Is there any way to replace TWRP with CWM? (Except restarting everything with Odin)
I'd appreciate if you guys could help me out.
Click to expand...
Click to collapse
u can try flash temporary CWM recovery and try to install CM11
http://forum.xda-developers.com/showthread.php?t=1987313
Same error:
Code:
set_metadata_recursive: some changes failed
E: Error in ...
(Status 7)
Installation aborted.
revoxis said:
Same error:
Code:
set_metadata_recursive: some changes failed
E: Error in ...
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Status 7 error.
I was using cocore twrp .. to get cwm I flash cocore cwm ..
Sent from my GT-I9070 using XDA Premium 4 mobile app
So after some messing around today with one of the cm12 builds, everytime I try to do anything in twrp I get the error "E: Unable to stat ' /data/power_supply_logger/power_supply_info.bin' " and i have no idea how to solve it. The only effect it seems to have is it makes restoring and backing up data fail at the last second (although as far as I can tell all of the data makes it). The error is always right after "updating partition details". I've tried reflashing 2 or three different versions of twrp (2.7.1.1, 2.6.3.1, and 2.8.1) as well as restoring stock vzw firmware through rsd lite as well as the gpe rom to no avail. Any help would be greatly appreciated.
Also, when flashing cm12, i get "mount: failed to mount /dev/block/platform/msm_sdcc. 1/by-name/userdata at /data: Device or resource busy"
StATicxTW0T said:
So after some messing around today with one of the cm12 builds, everytime I try to do anything in twrp I get the error "E: Unable to stat ' /data/power_supply_logger/power_supply_info.bin' " and i have no idea how to solve it. The only effect it seems to have is it makes restoring and backing up data fail at the last second (although as far as I can tell all of the data makes it). The error is always right after "updating partition details". I've tried reflashing 2 or three different versions of twrp (2.7.1.1, 2.6.3.1, and 2.8.1) as well as restoring stock vzw firmware through rsd lite as well as the gpe rom to no avail. Any help would be greatly appreciated.
Also, when flashing cm12, i get "mount: failed to mount /dev/block/platform/msm_sdcc. 1/by-name/userdata at /data: Device or resource busy"
Click to expand...
Click to collapse
I have the same problem with my moto g falcon XT1032.
Wen I try to flash CM 12 he gives the same error.
BinBug said:
I have the same problem with my moto g falcon XT1032.
Wen I try to flash CM 12 he gives the same error.
Click to expand...
Click to collapse
The first error or the second? I've narrowed the first down to a missing file in my data folder. Unfortunately rsd'ing doesn't help. If anyone'd be willing to upload it for me that'd be awesome. It's the bin file in /data/power_supply_logger/
The first error or the second error
StATicxTW0T said:
The first error or the second? I've narrowed the first down to a missing file in my data folder. Unfortunately rsd'ing doesn't help. If anyone'd be willing to upload it for me that'd be awesome. It's the bin file in /data/power_supply_logger/
Click to expand...
Click to collapse
Wen I try to flash te ROM he give me this:
Code:
Installing 'data/media/0/sideload.zip" ...
Checking for MD5 file ...
Skipping MD3 check : no MD5 file found
mont: failed to mount /dev/block/platform.msm_sdcc.1/by-name/userdata at /data: devices or resource busy
unmount of /data failed (-1): Devices or resource busy
E: Error Exexuting updater binary in zip ' /data/media/0/sideload.zip"
You say that i most change the bin file in /data/power_supply_logger/, but how?
link to rom that i use : CM12 for flacon
BinBug said:
Wen I try to flash te ROM he give me this:
Code:
Installing 'data/media/0/sideload.zip" ...
Checking for MD5 file ...
Skipping MD3 check : no MD5 file found
mont: failed to mount /dev/block/platform.msm_sdcc.1/by-name/userdata at /data: devices or resource busy
unmount of /data failed (-1): Devices or resource busy
E: Error Exexuting updater binary in zip ' /data/media/0/sideload.zip"
You say that i most change the bin file in /data/power_supply_logger/, but how?
link to rom that i use : CM12 for flacon
Click to expand...
Click to collapse
That error is caused by the version of TWRP you are using. Something about different versions and different updater scripts. Some have had sucess with 2.8.1, some with 2.6.3.1 and some with 2.7.1.1. You will need to try all three until you find the one that works for you. Do not touch the power supply file, that's whats causing my first error. Somehow it got deleted, and restoring to complete stock does not replace it, thats why i need someone to upload theirs.
So I don't know what has happened but I can't flash even a single custom rom. The problem occurs in TWRP as well as CWM. Also I am on the stock partition. Tried the modified partition too. The problem is still occuring no matter what I try. The following case is of SOKP. Every other rom also has the same problem. Even after trying it via adb the problem persists.
After I select the zip file in the recovery mode,the installation starts. After that, it says:
Patching system image unconditionally...
blkdiscard failed: Invalid argument
E : Error in/data/media/0/SOKP-L_5.1.1-LMY48B-R3-20150525-cancro.zip
(Status 7)
Installation aborted.
Have you checked whether your bootloader is locked or not (because of that damned MIUI MM)? Try sending through fastboot:
Code:
fastboot oem device-info
If the "Device unlocked" comes out as false, then unlock it first by sending through fastboot:
Code:
fastboot oem unlock
It'll wipe all the content of your phone though...
shivam0909 said:
So I don't know what has happened but I can't flash even a single custom rom. The problem occurs in TWRP as well as CWM. Also I am on the stock partition. Tried the modified partition too. The problem is still occuring no matter what I try. The following case is of SOKP. Every other rom also has the same problem. Even after trying it via adb the problem persists.
After I select the zip file in the recovery mode,the installation starts. After that, it says:
Patching system image unconditionally...
blkdiscard failed: Invalid argument
E : Error in/data/media/0/SOKP-L_5.1.1-LMY48B-R3-20150525-cancro.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Extend your partition first, you'll be fine then. There is manual tutorial in Mi3 General sub forum.
Hello to all. Sorry for my English, I do not speak it very well. I have a p8 lite 2017 and I'm trying to flash a stock firmware downloaded from firmware finder. My problem is this: when I try to flash 2 of the 3 files (update.zip, full.zip), the twrp gives me an error and in particular
Updating partition details ....
........ done
Full SELinux support is present.
MTP Enabled
Installing zip file '/external_sd/update.zip'
Cheking for MD5 file found .....
Skipping MD5 check: no MD5 file found
mountencrypt: failed to mount / data: No such file or directory
Removing unneeded files ...
Removing empty directorys ....
add link type file ...
write radio image ...
check_write_data_to_partition, write data error
E: UNKNOWN COMMAND (ERRNO) (in red)
update_huawei_pkg_from_ota_zip: update package from zip failed
UPDATER PROCESS ENDED WITH ERROR: 7
ERROR INSTALLING ZIP FILE '/EXTERNAL_SD/UPDATE.ZIP' (in red)
Updating partition details ....
..... done
I can not solve the problem. I also changed twrp, but nothing has changed.
At the moment I can not turn on the phone because it is stopped on the screen "your device is booting ..."
I hope you can help me, I'm going crazy.
thank you so much
alex'82 said:
Hello to all. Sorry for my English, I do not speak it very well. I have a p8 lite 2017 and I'm trying to flash a stock firmware downloaded from firmware finder. My problem is this: when I try to flash 2 of the 3 files (update.zip, full.zip), the twrp gives me an error and in particular
Updating partition details ....
........ done
Full SELinux support is present.
MTP Enabled
Installing zip file '/external_sd/update.zip'
Cheking for MD5 file found .....
Skipping MD5 check: no MD5 file found
mountencrypt: failed to mount / data: No such file or directory
Removing unneeded files ...
Removing empty directorys ....
add link type file ...
write radio image ...
check_write_data_to_partition, write data error
E: UNKNOWN COMMAND (ERRNO) (in red)
update_huawei_pkg_from_ota_zip: update package from zip failed
UPDATER PROCESS ENDED WITH ERROR: 7
ERROR INSTALLING ZIP FILE '/EXTERNAL_SD/UPDATE.ZIP' (in red)
Updating partition details ....
..... done
I can not solve the problem. I also changed twrp, but nothing has changed.
At the moment I can not turn on the phone because it is stopped on the screen "your device is booting ..."
I hope you can help me, I'm going crazy.
thank you so much
Click to expand...
Click to collapse
After having a soft-brick I followed this instructions:
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
My phone is running without problems
help me please, i was installing xiaomi.eu rom and i got an error updater process ended with ERROR: 1 error installing zip file, i tied to format data but when i do, it just gets stuck in there, when i wait on that error it just says it failed and gets me again on crdroid