Database Develop

Please help to get back to 100% stock

This is my Device
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.707.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT35DW901854
(bootloader) imei: 354435054034061
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3788mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.046s
Click to expand...
Click to collapse
I only unlock bootloader and flash ARHD rom.
Now I need to get back to 100% stock to get warranty.
I have nandroid backup after flash custom recovery.(So it don't have stock recovery.img)
I found this thread that have guide to get "LOCKED" on bootloader not "RELOCK". Is I need to S-OFF to get "LOCKED" on bootloader?
I don't have any stock file and don't know which files I need.
Please guide me step by step. :crying:

yes, you need s-off to be able to "lock" your bootloader again and remove "tampered".
to go back to stock use one of mike's stock-roms and this guide: http://forum.xda-developers.com/showthread.php?t=2265618
good luck!
edit: if you achieved s-off, you can also flash the correct official RUU for your device and your device will be 100% stock again.

Which RUU can use with my device.

Need help gaining s-off and LOCKING bootloader

I just need help with gaining S-off with HTC One Toolkit 2.0. When i try to prepare revone it just says: error code = 1.
I have unlocked bootloader and currently running ARHD 20.1 android 4.3 I heard that i need to have android 4.2.2 to gain S-off with revone. I dont know is that true or not, but if it needs to be on android 4.2.2 or lower then what ROM should i flash or should i flash shipped RUU.zip
This is my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 0000000000000
(bootloader) imei: 000000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3824mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.042s
I realy need help with reverting booltoader to locked because my camera realy sucks it has more then few dead pixels and every day there is new dead pixels on camera sensor. I just called the service and they told me that they cant do anything if bootloader is unlocked.

irumora said:
I just need help with gaining S-off with HTC One Toolkit 2.0. When i try to prepare revone it just says: error code = 1.
I have unlocked bootloader and currently running ARHD 20.1 android 4.3 I heard that i need to have android 4.2.2 to gain S-off with revone. I dont know is that true or not, but if it needs to be on android 4.2.2 or lower then what ROM should i flash or should i flash shipped RUU.zip
This is my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 0000000000000
(bootloader) imei: 000000000000000
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3824mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.042s
I realy need help with reverting booltoader to locked because my camera realy sucks it has more then few dead pixels and every day there is new dead pixels on camera sensor. I just called the service and they told me that they cant do anything if bootloader is unlocked.
Click to expand...
Click to collapse
Yes you need to go back to a 4.2.2 build... ARHD 13.4 should be ok. If you don't have 13.4 saved somewhere then ask in the ARHD thread if anyone can help or join us in the ARHD irc channel and we may be able to help you there.

No you don't, the build they're on now is fine as it's 4.1.2 not 4.2.2
Edit: that's the firmware, yes ROM also needs lowering
Sent from my HTC One using XDA Premium 4 mobile app

[Q] Can someone help me get out of this mess?

Hi guys,
Was doing an update to my HTC one and we had a power cut - Needless to say, I am in a pickle now.
I am just gonna go back to stock (CBA with the hassle) - That's if it's possible now of course.
What happens?
When I turn the phone on now, I just get the option for Fastboot-USB , Recovery etc - phone will not boot.
This is what my getvar returns.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34GW901652
(bootloader) imei: 354436055211070
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3918mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
getvar:all FAILED (status read failed (Too many links))
finished. total time: 3.870s
Can someone advised me on the best route to go down to get the phone working again? May be a few beers in it for you! :laugh:
Cheers,

risq said:
Hi guys,
Was doing an update to my HTC one and we had a power cut - Needless to say, I am in a pickle now.
I am just gonna go back to stock (CBA with the hassle) - That's if it's possible now of course.
What happens?
When I turn the phone on now, I just get the option for Fastboot-USB , Recovery etc - phone will not boot.
This is what my getvar returns.
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
finished. total time: 3.870s[/B]
Can someone advised me on the best route to go down to get the phone working again? May be a few beers in it for you! :laugh:
Cheers,
Click to expand...
Click to collapse
Remove IMEI and s/n from your post!!
Are you locked or unlocked? And what exactly do you mean you were updating?
Anyway, to give you some insight to your options: Since you're S-On, you can only flash an ruu for your version (1.29.401.12) or higher, there's this one:
http://www.htc1guru.com/dld/ruu-zip...0-01_release_318486_signed_2_4_decrypted-zip/
this is an ruu.zip, so you flash this in ruu mode, in bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE
fastboot reboot-bootloader

Htc One M7 Stuck on logo s-on

Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s

facebook.com said:
Last Two Days ago I took from customer Htc one m7 logo hang htc condition.
Phone goes to Recovery Mode I make it Wipe But phone still same problem.it was 1.55 hboot.then i try flash phone with RUU but its give me error 155 During Flashing time.Then i make Ressurect it with riffbox after there hboot 1.44 also change CID I make it Super cid1111111.
But at this moments I cant flash this phone with RUU,ZIP.
I try also adb tool flashing. but same nothing happened to me.
I must sure it need to s-off but i cant make it s-off bcoz phone is still logo hang.
Plz anyone hale me.
Code:
ot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.00
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W9xxxx
(bootloader) imei: 354xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4326mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
Click to expand...
Click to collapse
1- next time just bump you own thread (after 24 hours) http://forum.xda-developers.com/showthread.php?t=2674672
no need to double-thread!!
2- the reason nobody answered, is probably because we have no clue what you are doing: riffbox, SuperCID, locked bootloader, S-On = all very confusing
3- no functioning ROM = no S-Off
4- you need to have an unlocked bootloader to be able to flash custom stuff
5- maybe try a RUU.EXE

nkk71 said:
1- next time just bump you own thread (after 24 hours) http://forum.xda-developers.com/showthread.php?t=2674672
no need to double-thread!!
2- the reason nobody answered, is probably because we have no clue what you are doing: riffbox, SuperCID, locked bootloader, S-On = all very confusing
3- no functioning ROM = no S-Off
4- you need to have an unlocked bootloader to be able to flash custom stuff
5- maybe try a RUU.EXE
Click to expand...
Click to collapse
I try to flash Bootloader Lock & unlock but It same no take flash phone.
I try also TWRP recovery flash but its give me error e:can't mount sdcard

facebook.com said:
I try to flash Bootloader Lock & unlock but It same no take flash phone.
I try also TWRP recovery flash but its give me error e:can't mount sdcard
Click to expand...
Click to collapse
1- with SuperCID, I don't think the unlock token will work (if that's what you meant)
2- how are you able to flash TWRP if you are locked?? i think you're referring to stock recovery, and that's not going to help
==> you need to UNLOCK the bootloader or try running a RUU.EXE, try this one: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/

Boot Loop

Hey guys,
My M7 seems to be stuck in a boot loop. When I start it I get the HTC logo, then the screen will turn off and it'll restart. I can still access fastboot. I can flash clockwork mod and boot to it with occasional success but I haven't gotten TWRP to work. I can access adb through clockwork though so maybe that can be useful. I've tried flashing the latest RUU and a couple older versions via fastboot; usually I can get the phone to boot for a couple of minutes and then it will restart and be back in the bootloop. I have s-off and the bootloader is unlocked currently. I've also tried flashing the RUU relocked, no success.
I have the AT&T 32GB version in black. Here's the fastboot getvar all response:
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3715mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.062s
The last thing I tried to do is flash an old RUU that's why the software version is old. I starting having these problems when I was on version 7.23 I believe. If anyone has some ideas for me I'd appreciate it!