Is this possible to install a tmobile stock rom on the at&t note 3 or will the locked bootloader prevent this? just curious as i'm gonna be moving to tmobile for the unlimited LTE and would like to use the stock apps as well with it. Does anybody know if this is possible? I looked around a little bit and couldn't find any information on doing this.
syrkel2 said:
Is this possible to install a tmobile stock rom on the at&t note 3 or will the locked bootloader prevent this? just curious as i'm gonna be moving to tmobile for the unlimited LTE and would like to use the stock apps as well with it. Does anybody know if this is possible? I looked around a little bit and couldn't find any information on doing this.
Click to expand...
Click to collapse
1. This should be in the help section
2. I've flashed verizon roms on my note 3 without a problem so it's possible. All you'll have to do is update your APN settings. It can't hurt to try it, that's the point of safestrap!
Yeah I'm not rooted so was wondering if the tmobile rom via Odin would fail or not
Sent from my SAMSUNG-SM-N900A using Tapatalk
Related
http://www.blownco.com/JamieD81/cm-test/cm-10.1-20130215-UNOFFICIAL-quincyatt.zip
Room
http://goo.im/gapps/gapps-jb-20121212-signed.zip
Gapp
Is recommend that you always do a full wipe and nandroid back up
This the treat in the att forum. http://forum.xda-developers.com/showthread.php?t=2141236
How are we supposed to flash this if this is quincyatt?
From what I understand they are cross compatible. I flashed the T-Mo stock rom onto my unlocked At&t Note since I use T-Mobile for my service which allows wifi calling.
Sent from my HuGe Note while tucking your mom in bed!
mahgninnuc93 said:
From what I understand they are cross compatible. I flashed the T-Mo stock rom onto my unlocked At&t Note since I use T-Mobile for my service which allows wifi calling.
Sent from my HuGe Note while tucking your mom in bed!
Click to expand...
Click to collapse
1st post after years of lurking:
My i717 is an unlocked ATT and rooted - to run on Tmo. I wonder if the rom (bloated as it may be comparred to the ROM I'm using) will install well on my 1+yr old ATT model. I suppose only one way to tell. (crossing fingers).
Anyone tried to see if nfc beam works by default on this updated / stock rom?
.
hillg001 said:
1st post after years of lurking:
My i717 is an unlocked ATT and rooted - to run on Tmo. I wonder if the rom (bloated as it may be comparred to the ROM I'm using) will install well on my 1+yr old ATT model. I suppose only one way to tell. (crossing fingers).
Anyone tried to see if nfc beam works by default on this updated / stock rom?
.
Click to expand...
Click to collapse
It will work on either unit. I currently am using an unlocked and rooted I717 and have run successfully both T-MO and AT&T ROM's.
I just need to get one that's not stock T-Mo to get the Wifi Calling working because I need it for my new place where I get NO reception LOL.
Hey guys,
Upon reading through the threads, I wasn't able to find specifics to what I'm looking for.... it's apparent that the support has stopped for this issue, which I completely understand. Any help would be greatly appreciated.
I have an unlocked ATT Note 3 on (NJ5) to be used on T-Mobile.
I'm wanting to downgrade from 4.4.4 to 4.4.2 to get back to (NC2).
Can someone confirm the following: (Please add to it if I'm missing something)
Odin ATT 4.4.2 (NC2) - Anyone have the direct link?
Root - Best method?
Safestrap work around? Is this the correct thread? How about this?
Planning to flash ATT FireKat (TouchWiz based) ROM....
From my understanding:
I only have one shot at this, therefore, I want to make sure that all my ducks are in a row before doing this as a "mistake," isn't an option right? I only have one shot at this or Hard brick yes?
Questions:
After successfully doing all this, with the correct TM APN settings, will the ATT phone be able to use all TM's bands? LTE 1700, Band 4 etc....
What are any drawbacks of using the ATT N3 on TM, if any? (I'll be happy with 4.4.2 so no worries on any fancy updates.)
The phones currently unlocked right now. Will doing the steps above lock the phone back up?
Is this all worth it or should I just sell the ATT N3 and buy a TM branded one?
Is there anything I'm missing?
Thanks in advance!
* I hope this post also helps anyone in the future that's in the same boat as I am.
http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
this will give you 100% stock nc2.
Best way to root is with towel root.
with safestrap you do not need a workaround as it works perfect on nc2 you only need to do a workaround if you would like to go to 4.4.4...And for the record I've done a lot of flashing of random stuff that came from here and I did myself and I'm yet to hard brick or come from a point of no return.
all those t-mobile questions I can't answer cause t-mobile is crap in my area..
Hope this helps!
yourbeatdude said:
http://forum.xda-developers.com/note-3-att/general/n900aucucnc2-odin-files-t2838117
this will give you 100% stock nc2.
Best way to root is with towel root.
with safestrap you do not need a workaround as it works perfect on nc2 you only need to do a workaround if you would like to go to 4.4.4...And for the record I've done a lot of flashing of random stuff that came from here and I did myself and I'm yet to hard brick or come from a point of no return.
all those t-mobile questions I can't answer cause t-mobile is crap in my area..
Hope this helps!
Click to expand...
Click to collapse
Thanks a bunch! I really appreciate it.
To confirm:
From a dead stop (the state my phone is at right now on NJ5)...
1. Odin NC2. (Which one specifically shall I download? I see a bunch of different links.)
2. Towel Root.
3. Put the TM Sim in...add APN's...
4. Flash ROM if desired...
5. Good to go?
Just need these 4... and if you want to rom you need to install busy box and safestrap after you root with towel root. Then yea should be good to go!
yourbeatdude said:
Just need these 4... and if you want to rom you need to install busy box and safestrap after you root with towel root. Then yea should be good to go!
Click to expand...
Click to collapse
Thanks again!
Ok so I'll ODIN those 4 files, then ROOT, then install safestrap, then busybox, and then ROM .... all in this order?
iunlock said:
Thanks again!
Ok so I'll ODIN those 4 files, then ROOT, then install safestrap, then busybox, and then ROM .... all in this order?
Click to expand...
Click to collapse
Busy box first then safestrap...
yourbeatdude said:
Busy box first then safestrap...
Click to expand...
Click to collapse
Gotcha. Thanks!
Oh and would you happen to know if the ATT device has the 1700 band (band 4) to support TM's LTE? I remember with the older devices ATT branded phones didn't have the 1700 build in, but now I'm thinking it might be different....hhmm
Also, it is unlocked right now...will the phone lock itself after all this?
iunlock said:
Gotcha. Thanks!
Oh and would you happen to know if the ATT device has the 1700 band (band 4) to support TM's LTE? I remember with the older devices ATT branded phones didn't have the 1700 build in, but now I'm thinking it might be different....hhmm
Also, it is unlocked right now...will the phone lock itself after all this?
Click to expand...
Click to collapse
Not sure but I think there is some that use att note 3 on t-mobile and works fine I'm guessing... and personally never unlocked a phone for use elsewhere as I been with att for like 10 years lol... but I really don't see it locking it personally...
Help on using 4G LTE in Pakistan
I have just received my AT&T Samsung Note 3 model SM N900A and am using it in Pakistan with warid network. I received the sim unlock code from AT&T. Warid is giving us 4G LTE service but my cell does not work on it. Since warid is not giving 3G service, my cell just connects using edge which is very slow. I actually bought Note 3 for 4G LTE but due to some reason its not working. The carrier people have no answer except that my set is not supported by their system. Can you kindly help? My set is not rooted.
Warid 4G LTE is working on 1800Mhz FDD Band 3 which is supported by my set. Other device parameters are as below:
Baseband version N900AUCUBMJ5
kERNEL VERSION 3.4.0-1625098
[email protected] #1
build JSS15J.N900AUCUBMJ5
Android version 4.3
And I would also like to know if I can update my set to newer android version or not?
Awaiting your positive response.
[email protected]
Question, are these files also downgrade the modem firmware to match the 4.4.2 ROM?
The reason I want to downgrade to 4.4.2, is to fix the GPS signal issue we all AT&T Note 3 owners having after the 4.4.4 update. Does anyone downgraded to 4.4.2 and GPS issues fixed?
I have an At&t Note 4 that I am using on ting, which piggybacks off of T-Mobile here in my area.
I am wondering since I cant find much of any custom roms for the at&t variant of the Note 4, if I would be able to install T-mobile Roms? Since I am on T-Mobile towers?
Thanks in advance.
Blind
BlindDude said:
I have an At&t Note 4 that I am using on ting, which piggybacks off of T-Mobile here in my area.
I am wondering since I cant find much of any custom roms for the at&t variant of the Note 4, if I would be able to install T-mobile Roms? Since I am on T-Mobile towers?
Thanks in advance.
Blind
Click to expand...
Click to collapse
Your AT&T phone is rooted and has an unlocked bootloader?
is there any way to get a stock at&t 5.1.1 rom on my t mobile note 4?
ShrekOpher said:
Your AT&T phone is rooted and has an unlocked bootloader?
Click to expand...
Click to collapse
Oh, no, I'm not rooted or anything yet. The phone will be here in a few days.
So I take it the reason why there aren't any at&t roms, is because there is no root and unlocked bootloader? Crap!
OK, Nevermind to this thread. I just sent a return request for the at&t note 4 and I ordered a T-Mobile Note 4. Problem solved.
Hello I have a verizon note 4 and am using it on tmobile my question is this, Now that the 910v can be rooted what happens if I root it and download a tmobile rom and install it on the phone? Will it work or will it brick the phone? I have no idea if there is any real difference between the verizon note and the tmobile note besides the carrier. Any input would be appreciated as I cant stand the verizon bloatware and would love to have my tmobile stuff back
thanks in advance
As far I know not possible
Tmobile is GSM model and verizon is CDMA frequency bands different.
I did something similar with AT&T G2 and loaded a Tmobile ROM on it. First you need root and TWRP or equivalent. and then some developer have to created a modified bootstack that are tailored for your phone model to work with the rom. Once you load the bootstack, then you load the rom without the radio. Not for the faint of heart.
Hello, does anybody know how to do a carrier switch with snapdragon like Samsung galaxy S8?
There is a how to in the S8 sub forum. Wonder if it is done the same way. Anybody tried?
Switch
Looks like it i got the verizon variant and ive downloaded the xaa rom which i believe is the candian one and it worked but didnt have any of the features like volte and wifi calling so i just now flashed att firmware and it worked flawlessy so yes it works!! no root no complications
feryao said:
Hello, does anybody know how to do a carrier switch with snapdragon like Samsung galaxy S8?
There is a how to in the S8 sub forum. Wonder if it is done the same way. Anybody tried?
Click to expand...
Click to collapse
We will need eng kernel before that happens. I'm sure it will be doable in the future, not now though.
Edit.....looks like note 8 could be different than the s8...
suzook said:
We will need eng kernel before that happens. I'm sure it will be doable in the future, not now though.
Edit.....looks like note 8 could be different than the s8...
Click to expand...
Click to collapse
its not i just put att firmware from verizon to xaa to att no issues
https://imgur.com/a/DrO7A
suzook said:
We will need eng kernel before that happens. I'm sure it will be doable in the future, not now though.
Edit.....looks like note 8 could be different than the s8...
Click to expand...
Click to collapse
Flash to all and all to flash...no prob
So if I flash AT&T firmware on Tmobile Note 8, it should work fine on AT&T since there's no Tmobile Unlock App in it? Right?
Just bought a Tmobile Note 8 and am trying to make it run on AT&T
umair239 said:
So if I flash AT&T firmware on Tmobile Note 8, it should work fine on AT&T since there's no Tmobile Unlock App in it? Right?
Just bought a Tmobile Note 8 and am trying to make it run on AT&T
Click to expand...
Click to collapse
Yes...if you look into the s8+ forum for carrier switch there is a guide that should also work for note 8...the main focus is to change the csc...however, you may just be able to flash the ATT firmware and it work when you put in the ATT SIM. It may be better to flash the unlocked firmware first...and then to att...but to get the device to be csc ATT, instead of ATT, ATT, TMB, You may have to follow the S8+ guide...
So try the easiest first, flash ATT...If activation does not work, flash Unlocked then ATT, if that is no good...follow the S8+ guide with Canadian firmware to change csc code of device to ATT...you might pm the op of the S8+ guide about what Canadian firmware to flash to change the csc...I am going to make a guide for us when I have a chance to test it myself...if just flashing to AT&T works...awesome, good luck
Oh yeah...the device must be unlocked first to change carriers...you can get it unlocked by T mobile or by paying for it