This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-roger001-3-22-631-1-zip/
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-bm___001-3-23-666-1-zip/
Telus Nandroid: Stock_JB_4.3_TELUS001_TWRP_3.22.661.1.zip - http://goo.gl/sYoqei
Telus RUU ZIP: http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Run fastboot oem rebootRUU.
Then, flash the RUU with the command fastboot flash zip filename
Click to expand...
Click to collapse
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
12. Remove *Tempered* from boot thread, link: http://forum.xda-developers.com/showthread.php?t=2477792
13. Unroot from SuperSU app.
14. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
15. All should be good now.
Click to expand...
Click to collapse
** I am working from theory, and NOT actual experience with this **
Guide for HBOOT 1.44 (4.1.2) & those on DEV/GPE/ATT/INTL RUU based firmwares
Bell: 1.29.666.5 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
Rogers: 1.29.631.4 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-roger001-1-29-631-4-2013-06-03-zip/
Telus: 1.29.661.5 - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-telus001-1-29-661-5-rar/
Stock Recovery for 1.44 HBOOT: http://goo.gl/Yzkwtl
1.44 HBOOT (S-Off required): http://d-h.st/qfc
Assumptions:
1. You have S-Off
2. You have 1.44 HBOOT
3. You know how to use fastboot/adb commands.
Steps to revert to 4.1.2 HTC One:
1. Install earliest possible RUU for Dev edition.. 1.29.1540.3 http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_brightstarus_wwe_1-29-1540-3-zip/
Make sure your CID is 11111111 and MID is PN0712000.
1a. If it fails to install, install the 1.44 HBOOT from above: fastboot flash zip hboot.zip and then re-flash the DEV zip file as fastboot flash zip devruu.zip
2. Install recovery. CWM for Bell & Rogers, TWRP for Telus. Do a backup from custom recovery (mostly to generate a backup path to use in step 4)
3. Reboot back into OS
4. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\ or \\data\media\clockworkmod\ .... (I am hazy on the path detail for CWM) You may need to use ES File Explorer to move the folder around if cwm is using 0\clockworkmod folder.
5. Reboot into recovery, select restore, and restore the nandroid file.
6. You should be booting into the earliest HTC OS for Rogers, Bell, Telus. (Your fastboot getvar all will still say 1.29.1540.3, this will change after an OTA)
7. Change your CID to Rogers001, BM___001, or TELUS001 accordingly in fastboot.
8. If you are rooted, either unroot supersu, or flash this file unroot-flashable.zip from recovery: http://goo.gl/JBmJVQ
9. Install stock recovery from fastboot http://goo.gl/Yzkwtl. Do a factory reset to verify that recovery has installed. You should NOT see CWM or TWRP during reset process.
10. Reboot back into OS and check for OTA, your OTA should come through and install itself, your fastboot getvar all should now result in the correct 1.29.x.17 main version.
11. At this time, you are stock, with S-Off and unlocked bootloader. If you want to continue further to lock bootloader and S-ON, start from step 9 in post 1.
Click to expand...
Click to collapse
Miscellaneous tips and tricks:
If you can NOT mount /sdcard in recovery
Download your Non-Canadian recoveries from: http://d-h.st/users/guich/?fld_id=29380#files or http://forum.xda-developers.com/showthread.php?t=2545227
Download Canadian 1.55 HBOOT recovery: http://goo.gl/2Kntxz
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot.
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery <custom recovery>.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to go now.
Click to expand...
Click to collapse
Radio/Modem files
Radio for Bell/Rogers/Telus for 3.x.x.x firmware (hboot 1.55): http://forum.xda-developers.com/showpost.php?p=46513020&postcount=12 - Tested
Radio fro Bell/Rogers/Telus for 1.x.x.x firmware (hboot 1.44): http://forum.xda-developers.com/showpost.php?p=45360195&postcount=5 - Not Tested
Click to expand...
Click to collapse
Thanks for the help! was looking for the nandroid back ups. will check back when you have the 1.44 written up. Is there a way i can upgrade my hboot to 1.55 from 1.44 in order to use the nandroid in post 1. If load the 1.29 nandroid my touch screen wont work and i need to go buy a otg cable in order to accept whats on the screen.
Thank You so much!!
I've been searching for the ROGERS RUU or Nandroid all day, new to Android so I didn't think of making a "nandroid" backup before flashing ROMs, but you saved me mate
Cheers!
Rogers htc one stuck on fastboot screen
Rogers htc one stuck on fastboot screen.
What have you tried so far? How did it get stuck?
Stuck on fastboot
SaHiLzZ said:
What have you tried so far? How did it get stuck?
Click to expand...
Click to collapse
Before following your instructions today, i relocked the bootloader and tried few exe and zip ruu yesterday. After that its stuck on fastboot screen.
What's the output of fastboot getvar all ?
SaHiLzZ said:
What's the output of fastboot getvar all ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.22.631.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3983mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
1. Unlock boot loader and download rogers nandroid and unzip.
2. Flash TWRP
3. Boot into TWRP
4. Run a fake backup. If it fails.. Got a SD card issue, let me know so I can guide you through it.
5. On computer type adb devices. Should come back with device in recovery mode
6. AD
6. Adb shell, then CD SDCARD, CD TWRP, CD BACKUP, note the path
7. Adb push rogersback \SDCARD\TWRP\BACKUPS\######\somefolder
Rogers Htc One stock rom
Thanks Sahilzz, I fixed it. Everything is back to normal. I was able to bring it back to stock rom.
Thanks a lot.
how do I install CWM I have twrp recovery. When I tried to install it. It said on CMD, but the phone keeps rebooting
Retry. Sometimes it takes a few tries for recovery to stick. Are you following post #2?
What's your fastboot getvar all output?
HELP! Blue screen, can't get past bootloader
I tried installing an OTA update that came through and now I am stuck on a blue screen. I can get to bootloader and fastboot but nothing I do can get past that. I want to return to stock or even just flash another ROM but I can't as my computer won't recognize the phone either. My HTC One is unlocked, S-On, TWRP recovery and HBOOT 1.44 . I've tried doing a fastboot getvar all but as I said, the computer won't recognize the phone so command prompt just sits there.
Move to a windows 7 machine and retry. Can't help if fastboot/adb doesn't work
SaHiLzZ said:
This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://goo.gl/7702AM
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://goo.gl/hw7Bj7
Telus Nandroid: Missing..
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Remove *Tempered* from boot thread, link: http://www.htc1guru.com/guides/guru-bootloader-reset/ OR http://forum.xda-developers.com/showthread.php?t=2477792
12. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
13. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
14. All should be good now.
Click to expand...
Click to collapse
Noob here
Step 9 says root.....what do you mean bu it?
Thanks
Install custom recovery, and root...
SaHiLzZ said:
Install custom recovery, and root...
Click to expand...
Click to collapse
Thanks......when should i relock bootloader?
So. My device has android 4.3 now, and I have rooted and unlocked it (I used the guide from HTCOneRoot.com).
I want to install the 4.4 official OTA, but am not able to. It just boots to TWRP if I try when I get the notification.
How do I go about this? Do I need to unroot the phone and reset it to stock? Or is there another way?
I'm kinda new to this world, so it's not an easy task for me.
I'm using the international non-carrier version, if that means something(?)
Also, I've attached a pic of my bootloader.
I hope you guys can help me.
Thanks.
You need stock recovery instead of TWRP
sent from my mobile device
SaHiLzZ said:
You need stock recovery instead of TWRP
sent from my mobile device
Click to expand...
Click to collapse
Would you care to elaborate, on how to?
like so: http://www.youtube.com/watch?v=FZR5yhP75Jg ?
You need to hunt the stock recovery based on your fastboot getvar main output and flash using fastboot flash recovery recovery.img
sent from my mobile device
As Sahilzz siad you need to flash the stock recovery.....using a stock recovery image of the stock rom you are using.
Its a very similar process to flash TWRP recovery into your phone....just that this time its stock recovery..
Find the stock recovery for your version of One....on google.
Hope that explains it.
Thanks for the kinda replies guys.
So, do how do I know which of these RUU files I should install?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU M7 U JB 50 HTC Europe 1.29.401.2 R Radio 4A.14.3250.13 10.33.1150.01 Release 311663 Signed 2 4
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.ex e
from here: http://forum.xda-developers.com/showthread.php?t=2428276
Faderskibet said:
Thanks for the kinda replies guys.
So, do how do I know which of these RUU files I should install?
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe
RUU M7 U JB 50 HTC Europe 1.29.401.2 R Radio 4A.14.3250.13 10.33.1150.01 Release 311663 Signed 2 4
RUU_M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13. 3227.06_10.27.1127.01_release_308001_signed_2_4.ex e
from here: http://forum.xda-developers.com/showthread.php?t=2428276
Click to expand...
Click to collapse
if your ROM is stock, you only need stock recovery, not complete ruu, so
here you go: http://d-h.st/WJ8
make sure MD5 Sum: 75ced0d5599d4efca900293966a2ff34 is correct, i sometimes have problems downloading from there, if it's not correct then the download is corrupt.
to flash it, go to bootloader/FASTBOOT USB:
fastboot flash recovery stock_3.62.401.1.img
fastboot erase cache
fastboot reboot
now take the OTA, should install fine if ROM is stock.
I'm new to flash and RUU 's
I'm a little confused, even reading guides .
I would leave my htc one as stock and make updates over the air .
I value help for this.
Currently my OS is ViperOne6.2.1 and my recovery is TRWP 2.6.3.3
--------------
UNLOCKED
S -OFF
--------------
> fastboot getvar all
( bootloader ) version: 0.5
( bootloader ) version- bootloader : 1.56.0000
( bootloader ) version- baseband : 4A.23.3263.28
( bootloader ) version- cpld : None
( bootloader ) version- microp : None
( bootloader ) version- main: 4.20.707.7
( bootloader ) version- misc : PVT SHIP S -OFF
( bootloader ) SerialNo : xxxxxxxxxxxxx
( bootloader ) imei : xxxxxxxxxxxxxx
( bootloader ) meid : 00000000000000
( bootloader ) product : m7_u
( bootloader ) platform: HBOOT - 8064
( bootloader ) modelid : PN0711000
( bootloader ) cidnum : HTC__044
( bootloader ) battery- status : good
( bootloader ) battery- voltage : 3790mV
( bootloader ) partition - layout : Generic
( bootloader ) security : off
( bootloader ) build -mode : SHIP
( bootloader ) boot -mode: fastboot
( bootloader ) commitno - bootloader : dirty - 59adc32b
( bootloader ) hbootpreupdate : 11
( bootloader ) gencheckpt : 0
I downloaded the
"RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
and
"Guru_Reset_M7_3.63.707.4.zip"
but not sure if that's correct.
And now , what are the specific steps for my case ?
I really appreciate any help
Thank you!
Site is back up now, look for your rom, you want to look for ?.??.707.?
you will need to look for stock rom guru reset roms, yours is in this list, make sure MID and CID etc match first, also check the file size, although the site is working, im still having problems downloading a file from the site, it says its finished and should be 780mb but is only downloading 45mb
http://www.htc1guru.com/downloads/stock-rom-downloads/
The details are:
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 27498
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
Copy the file to your phone, easiest way is to rename it to rom.zip, and then flash it in recovery as you would do with any other rom, if you want your phone to be completely stock then select flash radio and recovery in the installer.
Seanie280672 said:
Site is back up now, look for your rom, you want to look for ?.??.707.?
you will need to look for stock rom guru reset roms, yours is in this list, make sure MID and CID etc match first, also check the file size, although the site is working, im still having problems downloading a file from the site, it says its finished and should be 780mb but is only downloading 45mb
http://www.htc1guru.com/downloads/stock-rom-downloads/
The details are:
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 27498
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
Copy the file to your phone, easiest way is to rename it to rom.zip, and then flash it in recovery as you would do with any other rom, if you want your phone to be completely stock then select flash radio and recovery in the installer.
Click to expand...
Click to collapse
Good afternoon, Seannie!
I did exactly as mandated by the rules.
The phone was relocked and as "Not Tampered". Without the superuser.
When I tried to update it over the air, accused the phone that I'm using a modified version and can not update the system. = [
andrekerplunk said:
Good afternoon, Seannie!
I did exactly as mandated by the rules.
The phone was relocked and as "Not Tampered". Without the superuser.
When I tried to update it over the air, accused the phone that I'm using a modified version and can not update the system. = [
Click to expand...
Click to collapse
Did you flash the stock recovery when you installed the ROM ? there should of been 2 tick boxes, 1 says flash stock radio and the other says flash stock recovery just before the rom installs, I selected both when I ran it.
Seanie280672 said:
Did you flash the stock recovery when you installed the ROM ? there should of been 2 tick boxes, 1 says flash stock radio and the other says flash stock recovery just before the rom installs, I selected both when I ran it.
Click to expand...
Click to collapse
Yes, I marked them both! And...
you could try this, when you download the OTA, select install later, then plug you phone into your computer, and find the OTA on your internal storage, its just a zip file, open it with something like WinRAR and look for Firmware.zip, open that and extract recovery.img, you will see other things in there too like HBOOT etc, just ignore those, you only want the recovery for now.
Place the recovery that you just extracted into your fastboot folder and reboot your phone to fastboot mode, then flash it:
fastboot flash recovery recovery.img
It may be that the rom you flashed just has an out of date recovery in it and needs updating.
Once your phone is back on, check for updates again and see if it will install.
The trouble with OTAs is everything must be the same, if anything is disabled or missing that the OTA wants to update then it will fail, most of the time its down to an out of date recovery.
---------- Post added at 08:06 PM ---------- Previous post was at 07:19 PM ----------
You could always try manually updating if the above fails, link below is for the OTA, and the instruction on how to install it are at the top of the page.
OTA M7 U K44 SENSE55 MR HTC Asia WWE 4.20.707.7-3.63.707.4 Release 350432vv58wn1jy1a88n9h
Download
http://www.htc1guru.com/dld/ota_m7_...-63-707-4_release_350432vv58wn1jy1a88n9h-zip/
Instructions at the top of the page here:
http://www.htc1guru.com/downloads/ota-downloads/
The first set of numbers is what your rom will be updated too: 4.20.707.7
The second set of numbers is the rom version you are currently running: 3.63.707.4
K44 SENSE55 this bit means you will get KitKat 4.4 with Sense 5.5
Seanie280672 said:
you could try this, when you download the OTA, select install later, then plug you phone into your computer, and find the OTA on your internal storage, its just a zip file, open it with something like WinRAR and look for Firmware.zip, open that and extract recovery.img, you will see other things in there too like HBOOT etc, just ignore those, you only want the recovery for now.
Place the recovery that you just extracted into your fastboot folder and reboot your phone to fastboot mode, then flash it:
fastboot flash recovery recovery.img
It may be that the rom you flashed just has an out of date recovery in it and needs updating.
Once your phone is back on, check for updates again and see if it will install.
The trouble with OTAs is everything must be the same, if anything is disabled or missing that the OTA wants to update then it will fail, most of the time its down to an out of date recovery.
---------- Post added at 08:06 PM ---------- Previous post was at 07:19 PM ----------
You could always try manually updating if the above fails, link below is for the OTA, and the instruction on how to install it are at the top of the page.
OTA M7 U K44 SENSE55 MR HTC Asia WWE 4.20.707.7-3.63.707.4 Release 350432vv58wn1jy1a88n9h
Download
http://www.htc1guru.com/dld/ota_m7_...-63-707-4_release_350432vv58wn1jy1a88n9h-zip/
Instructions at the top of the page here:
http://www.htc1guru.com/downloads/ota-downloads/
The first set of numbers is what your rom will be updated too: 4.20.707.7
The second set of numbers is the rom version you are currently running: 3.63.707.4
K44 SENSE55 this bit means you will get KitKat 4.4 with Sense 5.5
Click to expand...
Click to collapse
With this "Guru_Reset_M7_3.63.707.4" my software number is 3.63.707.3 not 3.63.707.4
Should I try anyway?
andrekerplunk said:
With this "Guru_Reset_M7_3.63.707.4" my software number is 3.63.707.3 not 3.63.707.4
Should I try anyway?
Click to expand...
Click to collapse
That's strange ????, you are s-off right ?
That's probably the mis-match you are getting.
Seanie280672 said:
That's strange ????, you are s-off right ?
That's probably the mis-match you are getting.
Click to expand...
Click to collapse
Yes, I'm s-off
Also found it strange when downloading something and another appears.
Now I do not know what to do, since I have not the correct stock file.
3.63.707.3 = M7_UL (4g)
3.63.707.4 = M7_U (Non 4G)
Is your phone the 4g version or the non 4g version ? your output in the first post says non 4g (M7_U), but im wondering if at some point you changed your firmware to do that, don't want you flashing the 4g firmware if you don't have the 4g phone, it may brick it.
Seanie280672 said:
3.63.707.3 = M7_UL (4g)
3.63.707.4 = M7_U (Non 4G)
Click to expand...
Click to collapse
i'm M7U but guruRESET send me a wrong. I don't understand. And Now? =T
andrekerplunk said:
i'm M7U but guruRESET send me a wrong. I don't understand. And Now? =T
Click to expand...
Click to collapse
Yes, lots of people having the same problem in India, here is how to fix it: http://forum.xda-developers.com/showthread.php?t=2669217
Post 5 has the answer, you will have to download the RUU zip they linked and flash that instead, its for your MID and CID, I already checked, you will probably have to put TWRP recovery back on your phone first to flash that zip, you should get working OTA's then, but if you don't then refer to post 8 and what he did to get OTA's
Seanie280672 said:
Yes, lots of people having the same problem in India, here is how to fix it: http://forum.xda-developers.com/showthread.php?t=2669217
Post 5 has the answer, you will have to download the RUU zip they linked and flash that instead, its for your MID and CID, I already checked, you will probably have to put TWRP recovery back on your phone first to flash that zip, you should get working OTA's then, but if you don't then refer to post 8 and what he did to get OTA's
Click to expand...
Click to collapse
And how I install this rom 'RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
Now I do not have TWRP, my bootloader say LOCK, s-off, hboot 1:44
Can you guide me?
andrekerplunk said:
And how I install this rom 'RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
Now I do not have TWRP, my bootloader say LOCK, s-off, hboot 1:44
Can you guide me?
Click to expand...
Click to collapse
It shouldn't matter that your bootloader is locked as you are s-off.
Just download TWRP, put your phone in fastboot mode and then fastboot flash recovery (filename).zip to flash the new recovery, then transfer the rom RUU zip to your phone and flash it in recovery as normal.
Seanie280672 said:
It shouldn't matter that your bootloader is locked as you are s-off.
Just download TWRP, put your phone in fastboot mode and then fastboot flash recovery (filename).zip to flash the new recovery, then transfer the rom RUU zip to your phone and flash it in recovery as normal.
Click to expand...
Click to collapse
where I download TRWP
andrekerplunk said:
where I download TRWP
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/m7
Download 2.6.3.3 then put it in your fastboot folder on your computer and rename it to recovery.img for ease later on
Reboot your phone into fastboot mode
Then plug into your computer, it should now say fastbootUSB on your phone
Then open command promt, easiest way is inside your fastboot folder on your computer, hold control + shift + right mouse click and select open command window here
then type fastboot flash recovery recovery.img and press enter (it only take a few seconds)
reboot your phone and copy the rom RUU zip to the phone storage
When finished, uplug your phone from the computer and boot to recovery
select wipe first and swipe to factory reset
then select install and choose the rom RUU zip in the list, swipe to begin the install.
Seanie280672 said:
http://techerrata.com/browse/twrp2/m7
Download 2.6.3.3 then put it in your fastboot folder on your computer and rename it to recovery.img for ease later on
Reboot your phone into fastboot mode
Then plug into your computer, it should now say fastbootUSB on your phone
Then open command promt, easiest way is inside your fastboot folder on your computer, hold control + shift + right mouse click and select open command window here
then type fastboot flash recovery recovery.img and press enter (it only take a few seconds)
reboot your phone and copy the rom RUU zip to the phone storage
When finished, uplug your phone from the computer and boot to recovery
select wipe first and swipe to factory reset
then select install and choose the rom RUU zip in the list, swipe to begin the install.
Click to expand...
Click to collapse
ok...but...
"Updating partition details...
Formatting Cache using make_ext4fs function
Wiping data without wiping /data/media...
Done.
Updating partition details...
Installing '/sdcard/ruuasia.zip'...
Cheching for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip '/sdcard/ruuasia.zip'
Updating partition details...
Failed"
oh pants, I was hoping we wouldn't have to do it this way, its a bit more complicated, put your phone in fastboot mode and put rom RUU.zip in your fastboot folder on your computer and open a command promt.
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip (filename).zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen).
now simply reflash the rom.zip
fastboot flash zip (filename).zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
---------- Post added at 11:28 PM ---------- Previous post was at 11:00 PM ----------
I have to go offline now, but i'll check up on you in the morning, but this should work for you now as long as you follow those instructions.
Seanie280672 said:
oh pants, I was hoping we wouldn't have to do it this way, its a bit more complicated, put your phone in fastboot mode and put rom RUU.zip in your fastboot folder on your computer and open a command promt.
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip (filename).zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen).
now simply reflash the rom.zip
fastboot flash zip (filename).zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
---------- Post added at 11:28 PM ---------- Previous post was at 11:00 PM ----------
I have to go offline now, but i'll check up on you in the morning, but this should work for you now as long as you follow those instructions.
Click to expand...
Click to collapse
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
(bootloader) ...... Successful
OKAY [218.237s]
finished. total time: 257.516s
thats ok...but the green line not complete in phone!
What do I do?
when its finished it should reboot itself, but I did read somewhere that the progress bar doesn't reach the top, just leave it to do its thing, but looks good so far, its working, you should get OTA's now and matching firmware, if the OTA's don't work have a look at post 8 in that thread I linked earlier on how to fix it.
Hi, it is possible to to flash stock recovery and get LOCKED flag together ?
If I will use htcguru tool to LOCKED flag i must have twrp recovery, but if I LOCKED bootloader then will be problem with install stock recovery ?
If I install stock recovery first it will be will be unable to use guru tool?
I got S-OFF and tried to use "fastboot oem LOCK", but recieve ***RELOCKED*** flag...
deejay89 said:
Hi, it is possible to to flash stock recovery and get LOCKED flag together ?
If I will use htcguru tool to LOCKED flag i must have twrp recovery, but if I LOCKED bootloader then will be problem with install stock recovery ?
If I install stock recovery first it will be will be unable to use guru tool?
I got S-OFF and tried to use "fastboot oem LOCK", but recieve ***RELOCKED*** flag...
Click to expand...
Click to collapse
use the guru bootloader tool to set back the bootloader to locked and then pack your stock recovery image in a firmware.zip file with an android-info.txt file that match your phone info. flash the firmware.zip in ruu mode.
alray said:
use the guru bootloader tool to set back the bootloader to locked and then pack your stock recovery image in a firmware.zip file with an android-info.txt file that match your phone info. flash the firmware.zip in ruu mode.
Click to expand...
Click to collapse
due to "orangb10" cid I've got only nandroid backup, because is no ruu from polish orange........ so can I put recovery to nandroid backup folder and then restore firmware ?
@edit: I put recovery to nandroid backup folder but it doesen't work..
deejay89 said:
due to "orangb10" cid I've got only nandroid backup, because is no ruu from polish orange........ so can I put recovery to nandroid backup folder and then restore firmware ?
@edit: I put recovery to nandroid backup folder but it doesen't work..
Click to expand...
Click to collapse
The only way you can flash the recovery partition with a locked or relocked bootloader is by using a firmware.zip file in RUU mode
so like I said, pack your recovery.img and your android-info.txt file in a firmware.zip and flash it in RUU mode (require s-off)
Code:
fastboot oem rebootRUU
fastboot flash firmware.zip
fastboot flash firmware.zip
fastboot reboot-bootloader