Camera Xperia ZR Helppppp :( - Sony Xperia ZR

Hello friends, I have a look XPeria ZR, when recording audio during losn 3 seconds sounds good but then it seems he was recording under water, condenses and audio can be heard very well, I wanted to ask you to please help me with this problem as well because I have almost a month and a half and I'm worried too: (please help people who have been through this, and not to do, thanks hope your answers .....:crying::crying::crying:

ok what?
i couldnt understand very well what you mean but check if the phone is wet inside: remove the back and verify that it is dry and free of any other particles. Btw what rom are u using? have you flashed any mods?

Something like this? http://forum.xda-developers.com/showthread.php?t=2649950
(The first video describes the problem) I think that you should go and replace your phone
Sent from my MT11a using XDA Premium 4 mobile app

zytres said:
i couldnt understand very well what you mean but check if the phone is wet inside: remove the back and verify that it is dry and free of any other particles. Btw what rom are u using? have you flashed any mods?
Click to expand...
Click to collapse
I mean, when recording a video the audio of the video sounds good within 3 seconds of recording, but after empiexa to sound as if the audio will condense, not methylene water, aki is the link of the video you can see it friend? Thanks I hope you can help me ...http://forum.xda-developers.com/showthread.php?t=2649950

Jonfensu said:
Something like this? http://forum.xda-developers.com/showthread.php?t=2649950
(The first video describes the problem) I think that you should go and replace your phone
Sent from my MT11a using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there is no way you can fix it myself? incertar flash another ROM or another ZR applications to pass the problem?
please help I'm desperate not to do ...

gabbo123 said:
there is no way you can fix it myself? incertar flash another ROM or another ZR applications to pass the problem?
please help I'm desperate not to do ...
Click to expand...
Click to collapse
Where are you from, Gabbo??? Hablas español??? De ser así, aparentemente, no hay mucho que se pueda hacer... Si tienes garantía, házla válida...
Sent from my C5502 using XDA Premium 4 mobile app

ernyrsg said:
Where are you from, Gabbo??? Hablas español??? De ser así, aparentemente, no hay mucho que se pueda hacer... Si tienes garantía, házla válida...
Sent from my C5502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
si amigo ps nose que hacer ya no tiene garantia, nose puede hacer nada ?? ni montar la aplicacion de la camara de otro ZR, ??? estaba pensando poner la del Z1 que esta corriendo x la pagina...

gabbo123 said:
si amigo ps nose que hacer ya no tiene garantia, nose puede hacer nada ?? ni montar la aplicacion de la camara de otro ZR, ??? estaba pensando poner la del Z1 que esta corriendo x la pagina...
Click to expand...
Click to collapse
Try another ROM (stock based or CM) or firmware (4.1.2 ; 4.2.2) if the problem persist, send your phone to the next Sony store
Pd. Please, try to respond in English
---------
Toca que intente otra ROM, pero lo dudo, la otra sería intentar restaurar el celular con el SUS o el PCC. Si no tocaría que lo mande a reparar en algún servicio técnico de Sony, claro tendrá su costo. Mi duda es si el problema apareció de un momento a otro o ya lo tenía desde el principio (?)
Ps. Toca que responda en inglés jejeje, es una de las normas del foro
Sent from my MT11a using XDA Premium 4 mobile app

You should try Jonfensu's advice... Suerte!!!
Sent from my C5502 using XDA Premium 4 mobile app

Related

[Q] 2.3.4 Leak: No Camera "SCN" Options???

Hey guys, so I updated to the leaked Gingerbread not too long ago, and just recently I went to use my phone's camera. Right away, I noticed the "SCN" button is faded out, not allowing me to select it. This means I have no way of enabling nightshot or anything of the likes.
Anyone else having this problem? Any fix for it?
Thanks in advance!
Hola!.. eso me pasaba cuando le puse la nueva versión.. en ODIN la volvi a instalar y de repente la camara me funciono al 100%
liowdanger said:
Hola!.. eso me pasaba cuando le puse la nueva versión.. en ODIN la volvi a instalar y de repente la camara me funciono al 100%
Click to expand...
Click to collapse
ENGLISH DUDE ENGLISH!
Sent from my SGH-I897 using XDA App
popodopolus said:
ENGLISH DUDE ENGLISH!
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Try google translate, maybe.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
the forum rules state to post in English. He should've used google translate, not EVERYONE else...
liowdanger said:
Hola!.. eso me pasaba cuando le puse la nueva versión.. en ODIN la volvi a instalar y de repente la camara me funciono al 100%
Click to expand...
Click to collapse
Forum rules... Speak english.
Anyways what he said re flash with odin might fix it.
*BUMP*
Reflashed. To no avail, "SCN" options haven't returned. Any other suggestions?

Puertorriqueños!!!

Hola!! This thread is for puertorrican members!!! Took this idea from another thread entitled Mexicanos!!! So, this thread serves the same purpose. Asi que, si eres Puertorriqueño, postea aqui y menciona q telefono/tablets tienes y si quieres, que experiensa tienes rootiando Android!!
Bueno, empiezo yo, he estao hackiando iPods hace monton de tiempo, y me compre el Mytouch slide de Tmobile, Por ahi empeze. Estaba corriendo CyanogenMod 7 q era bieeennn brrutall!! Ese telefono se jodio, pero ahora tengo el HTC amaze y estoy orgulloso de tenerlo, an AMAZING device lololol.
Sent from my HTC Amaze 4G using xda premium
Saludos desde San Juan. Llevo a~os en xda dsd empeze con el HTC Mogul y aprendi a bregar con telefonos. dsd ahi he tenido mas telefonos de lo que puedo contar (I started a thread about posting yout smartphone history in General) he pasado x todos los OS.
http://forum.xda-developers.com/showthread.php?t=1421421
Ahora mismo tengo un Samsung Captivate corriendo ICS y estoy esperando el Lumia 900 para aprovechar del LTE. Trabajo para AT&T y tengo 24 a~os.
Sent from my SGH-I897 using Tapatalk
mike21pr said:
Saludos desde San Juan. Llevo a~os en xda dsd empeze con el HTC Mogul y aprendi a bregar con telefonos. dsd ahi he tenido mas telefonos de lo que puedo contar (I started a thread about posting yout smartphone history in General) he pasado x todos los OS.
http://forum.xda-developers.com/showthread.php?t=1421421
Ahora mismo tengo un Samsung Captivate corriendo ICS y estoy esperando el Lumia 900 para aprovechar del LTE. Trabajo para AT&T y tengo 24 a~os.
Sent from my SGH-I897 using Tapatalk
Click to expand...
Click to collapse
There happens to be a rule where you have to post a English translation as well. Just a fyi
deliriousDroid said:
There happens to be a rule where you have to post a English translation as well. Just a fyi
Click to expand...
Click to collapse
Wut??? That's kinda dumb :/
Sent from my HTC Amaze 4G using xda premium
eggydrums said:
Wut??? That's kinda dumb :/
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
Check the forum rules.....
Sent from my HTC Sensation XE with Beats Audio using XDA App

[Q] i9070 root UBLG2 firmware

Hello guys, first of all thanks to anybody who reads this. I really appreciate the time and efforts people puts helping others. For this thanks!
Well my problem is simple: I really want to root my device, I have a new Samsung i9070 (S Advance). But when I looked around for this, I saw things were not going to be that easy.
First of all I bought my device in Uruguay (from Ancel).
Second, the firmware that it has now is: I9070UBLG2
Third Im not sure if is stock or not, but I can say that when it turns on the original Samsung animation was changed by an ugly one from my local carrier. Dont know if that means is a non stock firmware or not.
I saw some tutorials to root this device, but they are for some specific firmwares. One of these tutorials said if I didn't have one of the supported firmwares, I needed to flash to one of them...but which!
Also I saw this thing of the binary / flash counter. I would not like to mess with that thing either, and Im not sure which rooting technique does avoid increasing that bloody counter.
I know is too much, that this is a new device and not an important one (like SIII) so probably tutorials are not massive.
I dont pretend any of you guys to answer me and teach me, I know I have some stuff I need to learn; only thing I would ask is some links, or a plcae to start and to trust!
Again thanks! I'm surprised you even reach this line
Cheers!
que tal? ya que sos de Uruguay voy a aprovechar a escribir en español..
Estoy en la misma y te quería preguntar si habías tenido suerte con ese firmware maldito de antel??
Cualquier avance que quieras compartir se agradece.
Saludos!
Mira lo que yo se es que, según tengo entendido en Gingerbread (2.3) no puedes rootear sin aumentar el contador binario pero en Jelly Bean si se puede (4.1) lo que pasa es que si cambias de firmware posiblemente si lo puedas rootear en una mejor version pero hay riesgos para pasarse a Jelly Bean como por ejemplo no se sabe si tu operadora tiene el BootLoader bloqueado. En ese caso tendrias el telefono inservible y si logras hacerlo Shaaan tiene un post aqui en xda en el que viene como rootear en Jelly Bean sin aumentar el contador binario, si quieres el link al post si no lo encuentras te lo paso por MP con lo poco que se aqui ando para ayudar >.<
BANKAI!
Please use English,..
Sent from my GT-I9070 using xda premium
vieri_firman said:
Please use English,..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Maybe we can use our language too lol
Sent from my GT-I9070 using xda premium
vieri_firman said:
Please use English,..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Sorry i forgot that i must use english in this forums :$ i'll translate the reply later
BANKAI!
Do these information match with your phone:
GT-I9070 - Argentina
PDA: I9070UBLG2
CSC: I9070ANCLG1
Version: 2.3.6
Date: 2012-09-19
Regions: Brazil
Click to expand...
Click to collapse
If yes please continue reading... else Reply me
Ok.. I think diego-ch can help you...
1. Go to his thread "Rooting your Galaxy S Advance without increasing the Binary Counter"
2. Post a REQUEST there that you want to Root and also provide this link too http://www.sammobile.com/firmware/?page=8&view=9038
3. He will download your firmware and root it... all you have to do is Download and Flash it using Odin I guess..
4. But the problem is he is concentrating more on CyanogenMOD and not this so he might not do this as soon as possible

[GUIDE][p990H] Latinamerican Jellybean ROM'S Installation without problems.

PARA LA VERSION EN ESPAÑOL VE AL POST 2
YOU FOLLOW THIS GUIDE AT YOUR OWN RISK!!!!
This guide, has been made for the people that has problem's with the signal, battery and other problem's installing jellybean at Latinamerica.
Most common problem: no signal at all, battery life...
F.A.Q.
Q. Why i do not have signal at jellybean, pacman, miuiv4, paranoid...
A. i think the problem is the imei, that is lost, when you flash the new versions
Q. Why the imei is lost in jellybean, but not with Ginger or ICS.
A. i don't know but this sould help you with the problem
Click to expand...
Click to collapse
To fix the problem, you just have to follow this few steps to make it work
Files needed:
1. STOCK ROM, it can be Froyo, Gingerbread, or ICS, here is a rom you can use (it will work) DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. We need a baseband Ir al post (TIP: at
Venezuela, Movistar, i used version V30B)
We need to know our original imei, it's placed at the box, or in the phone, under the battery.
Ok, let's begin!
Firs Step. (Installing the Stock ROM, if you already are on Stock, go to step 2.)
We have to flash a Stock rom, in order to view flash the baseband and connect to Hyperterminal.
Assuming you are on the oldbl, we copy the IntSD-Mount-Fix.zip and our Stock ROM to SD ext, now we open the AIOTKV5 and press option 4, and follow the steps to flash the new unlocked bootloader and install a recovery.
Restart the phone and it will open the recovery, then flash the Stock ROM, in the aroma installer, install whatever you want, we just need the rom for flash a BB.
Step 2. Flashing BB
Now we have a Stock ROM, call *#06#and we will see our imei.
Open the AIOTKV5 and press option 7 and option B, follow the instructions to put your phone Download MODE
In the SmartFlash window we click on the ROM/Copy DLoption and, inCP bin we find the BB that we got from tonyp's thread we have to mark the checkbox ERASE CAL DATA. (BE SURE THE COM PORT HAS BEEN AUTOMATICALLY FILLED)
Now, we go to START, if an error show's at the end of the flash, just close that window, and click start again, do it until, it says disconnecting from phone, or something like that.
Now, we verify our actual imei *#06# and we will se that our imei has changed to something like this 38560000001 or some strange number, or no nomber.
Now call if youare on GB: 1809#*990# / if you are on ICS: 3845#*990#
It will show up a (Hidden Menu)
Click on port settings
Click on CP USB
Click OK (DO NOT MARK THE CHECKBOX)
Now we have to search the port, Equipo -> Administrar -> Port -> LG mobile USB serial Port (COM X) where the X is a number, (Remember that number)
Step 3. Installing the Hyperterminal
Intall it normally, like always.
Open the Hyperterminal, and click Cancel to any windows that shows (some windows requiere a confirmation to close a window)
Now in the main window (a white one), click anywhere, and click on "SPACEBAR KEY" and a new window will show up, to create a new connection, select there the port you just stored, (DO NOT SELECT THE LG..)
Click properties and select the right options like these:
1st checkbox: 115200
2nd checkbox: 8
3rd checkbox: Blank
4th checkbox: 1
5th checkbox: Blank
Click to expand...
Click to collapse
and press OK, and OK
If everything's fine, the main windows will show up a, Connected: 00:00:00, in the left bottom corner.
Now type "AT" without the quotes, and press enter,
You will see this.
OK
GREAT Now it's easy!
type " at%imei " without the quotes.
You will se a number like this: 38560000001 or other number.
Now type " at%imei=YourIMEI " without quotes, where "YourImei" is your imei, you stored at the begining.
Ejemplo: " at%imei=30265978462 "
And you are done, call *#06# and you can se your imei.
Now you just have to flash your ROM, like CyanogenMOD 10.1, PAC-man, Paranoid, etc...
Please feel free to comment
Thanks to:
spyrosk For making this amazing tool, AIOTK.
tonyp For making the complete baseband guide.
carburano For making the DjangoManoucheX Stock ROM used here.
x_justin to make the english guide,
dcseek who brought us the solution.
[GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
FOR ENGLISH VERSION OF THE GUIDE, SEE POST 1
SIGUES ESTA GUIA BAJO TU PROPIO RIEZGO, NO ME HAGO RESPONSABLE POR DAÑOS O NADA ASI.
Esta guia esta pensada para todos aquellos, que tienen problemas (como yo) al instalar cualquier version mas alla de Gingerbread.
Problema mas comun: Sin señal.
F.A.Q.
Q. Porque no tengo señal en ninguna version.
A. El problema es que tu IMEI desaparece al instalarlo, aunque la BB y el RIL esten bien
Q. Problemas que causa.
A. Obviamente no tienes señal de ningun tipo (exepto por el WIFI), la bateria se consume muy rapido, ya que envia paquetes sin respuesta, y sigue intentando para obtener GSM.
Click to expand...
Click to collapse
Arreglando el problema. Solo debes seguir unos pocos pasos y asi lograr que te funcione.
Requerimientos:
1. ROM STOCK, puede ser Froyo, GB, o ICS. Aqui dejo el link para DjangoManoucheX DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. Necesitaremos la Baseband que nos guste Ir al post (TIP: en Venezuela, Movistar, me funciona la version V30B)
5. Sabernos el IMEI de nuestro telefono, en el telefono debajo de la pila, o en la caja.
Ok, comenzamos
Paso 1. (Instalando la ROM de Stock, si ya estas alli salta este paso.)
Tenemos que instalar la version STOCK de la rom, en DjangoManoucheX posee AROMA INSTALLER asi que sera facil instlarlo,
Asumiendo que estas utilizando el viejo bootloader, Copiamos IntSD-Mount-Fix.zip y nuestra rom DjangoManoucheX en nuestra SD externa, vamos al AIOTKV5 presionamos 4, y seguimos los pasos para montar nuestra particion con el nuevo bootloader liberado, e instalamos el recovery.
Reinicias normalmente, y entrara solo a Recovery, buscas e instalas normalmente, no importa que selecciones para instalar, solo queremos la rom para cambiar la BB.
Paso 2. Flasheando la BB
Ya que tenemos nuestra Rom de Stock, marcamos *#06# y veremos nuestra iMei cualquiera que sea el numero.
Abrimos el AIOTKV5 y presionamos la opcion 7 y seleccionamos la opcion B, y seguimos las instrucciones.
En la ventana de SmartFlash vamos a la opcion ROM/Copy DL y en CP bin buscamos la BB que descargamos. Seleccionamos la opcion ERASE CAL DATA. (Debes verificar que el campo PORT se rellene solo)
Y vamos a START, si aparece un error al final, solo cieralo, y dale START de nuevo, intenta hasta que diga, Desconectando.
Ahora, verificamos nuestra iMei marcando *#06# y veremos que nuestra iMei sera algo como esto 38560000001 o un numero extraño, o sin numero, da igual.
Ahora vamos a marcar, Si estas en GB: 1809#*990# / Si estas en ICS: 3845#*990#
Aparecera un Menu oculto (Hidden Menu)
Presionar en port settings
Presionar en CP USB
Presiona OK (NO SELECCIONES EL CHECKBOX QUE APARECE.)
Ya que hicimos eso, verficamos en nuestra pc, Equipo -> Administrar ->Puertos -> LG mobile USB serial Port (COM X) donde la X es un numero cualquiera, (RECUERDA EL NUMERO)
Paso 3. Instalando el Hyperterminal.
Luego de que lo descarguemos, aparecera el Wizard Setup. instalas todo normalmente, y abres el programa.
Presiona en cancelar a todo lo que aparezca, en algunos tienes que aceptar, el cancelar la ventana.
Ahora que quedo la ventana completamente blanca, haz click en cualquier parte y presiona la tecla "Espacio/Barra espaciadora" y una nueva ventana aprecera, diciendo Nueva Conexión, ahora seleccionamos el puerto que ya habiamos recordado, (NO ELIJAS EL QUE DICE LG)
y vamos a propiedades, y colocamos todo asi:
Primer recuadro: 115200
Segundo recuadro: 8
Tercer recuadro: Vacio / o Blank
Cuarto recuadro: 1
Quinto recuadro: Vacio / o Blank
Click to expand...
Click to collapse
Ahora presiona Ok, y Ok.
Y si haz hecho todo correctamente la ventana dira en la parte inferior izquierda, Connected: 00:00:00
Ahora escribe "AT" sin comillas, y presiona enter
veras algo como esto.
OK
Ahora escribimos " at%imei " sin comillas
veremos algo como esto: 38560000001 o un numero extraño.
Ahora escribimos esto " at%imei=TUIMEI " sin comillas, donde "TUIMEI" es obviamente tu numero de imei,
Ejemplo: " at%imei=30265978462 "
Y Listo! ya que hicimos todo, vamos de nuevo a nuestro movil, y marcamos *#06# y podremos ver nuestro imei.
Ahora simplemente, buscamos la ROM que nosotros querramos, como por ejemplo, CyanogenMOD 10.1, MIUIv4, o la que quieras
Y Puff el problema de la señal ya esta resuelto.
Thanks to:
spyrosk Por crear la maravillosa herramientar, AIOTK.
tonyp Por hacer la guia completa de las Baseband.
carburano Por hacer DjangoManoucheX Stock ROM que utilizamos.
x_justin Por hacer la guia en ingles.
dcseek Quien nos trajo la solucion.
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great friend......
But i could not understand anything.....would have been better if it was English first and the other language...
But will wait for the translation
Thanks mate
O2X with Magical ICS ROM and magnificent kernels from my buddies
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great help bro, still sounds complicated, a hug from Colombia and thanks
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Hermano, it's not difficult jus try and don't worry about bricking the phone because it's unbrickable. Cheers.
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thanks... I didn't know there was a problem updating to jellybean on a p990h
Sent from my LG-P990 using xda app-developers app
It was what was missing!
many latin american users don't used cm10/cm10.1 only for imei missing!!
GOOD THREAD MAN! thanks!
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Te mereces muchos thanks, buen post, saludos desde argentina
Sent from my LG-P990h using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thank you! Good job..
Sent from my LG-SU760 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Eduardo9309 said:
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yes if you install paranoid you will have no signal at all if you have the p990h
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
What the reason they had been ban?
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Wow I didn't noticed that the tittle had been changed... I thought it was jellybean.
I will change the name.
orbital_71 said:
What the reason they had been ban?
Click to expand...
Click to collapse
I do really think it's because gio doesn't support his rom. But who knows.
Enviado desde mi LG-P990 usando Tapatalk 2
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
rapbyone said:
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my SGH-I777 using xda app-developers app
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
lolote said:
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
Click to expand...
Click to collapse
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Eduardo9309 said:
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
lolote said:
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
Click to expand...
Click to collapse
That is weird, do you have a p990h? In telcel mexico?
Sent from my SGH-I777 using xda app-developers app

[Q] Ayuda con xperia z1

hola buenas noches
soy nuevo en el foro y quisiera saber si alguien me podría orientar con un problema con mi Xperia z1 el cual es:
A la hora de realizar una llamada se desconecta la señal de LTE y de cualquiera que este conectada y solo aparece "sin servicio",
los datos, menajes y demás funciona pero no puedo recibir ni hacer llamadas.
El modelo es c6906 y esta liberado.
espero puedan ayudarme. :angel:
saludos. :victory:
Questions are not belong to General section.
And use English...
Sent from my C6903 using XDA Premium 4 mobile app
Te recomiendo que escribas en inglés, ( usa un traductor) es lo que yo hago. ¿Estas usando una Custom rom?
Sent from my C1505 using XDA Free mobile app
Thanks used the official, the problem is that if I have signal and data messages, but when I get a call or put out of operation and to recover the signal have to flash the baseband
-----------------------------------------------------------------
Gracias utilizó el oficial, el problema es que si tengo señal para los mensajes y datos, pero cuando hago o recibo una llamada se pone fuera de servicio y para recuperar la señal tengo que flashear la baseband
Sent from my C6906 using XDA Free mobile app
Hello, you tried to restore factory settings?
Sent from my C1505 using XDA Free mobile app
if not already restored and loses service when receiving any calls.
------------------------------------------------
si ya lo restaure y no se queda sin servicio al recibir alguna llamada
Sent from my C6906 using XDA Free mobile app
Probaste a desactivar LTE? te lo hace en las otras redes? ( 3g-gsm. ... etc)
Mira por aqui:
http://forum.xda-developers.com/xperia-z1 elp
Tried to turn off LTE? like it does on other networks? (3g-gsm. ... Etc)
Look around here: http://forum.xda-developers.com/xperia-z1 elp
Sent from my C1505 using XDA Free mobile app
Si ya lo intente pero sólo me funciona cuando seleccionó lte si lo cambio se queda sin señal y marac sin servicio :-S
--------------------------------------------------
If you try it but it only works when you set me lte if change is no signal and no service maraca: -S
Sent from my C6906 using XDA Free mobile app
Pásate por aquí y pregunta:
http://forum.xda-developers.com/xperia-z1/help , te podrán ayudar yo no estoy familiarizado con ese móvil lo siento:what:
Head over here and asks:
http://forum.xda-developers.com/xperia-z1/help, you can help I am not familiar with that phone sorry
Sent from my C1505 using XDA Free mobile app
---------- Post added at 08:36 PM ---------- Previous post was at 08:30 PM ----------
¿ has recibido y instalado alguna actualización de firmware últimamente? Porque si tienes alguna modificación como rooteo bootloader desbloqueado... etc...
y actualizas, te puede dar problemas
You have received and installed a firmware update lately? Because if you have any change as rooteo unlocked bootloader ... etc ...
and upgrade, it can cause problems
Sent from my C1505 using XDA Free mobile app
English only here please.
@yamazaki corp please check your PM's

Categories

Resources