I have sacrifice my Lightflow to light up the Xperia logo when there is a notification. I like the Xperia logo light up when having notification, try to add Lightflow into Stamina mode, but still not working.
Lightflow can control the xperia logo ?
Sorry idon't answer to your quetion
BreckZeBoulay said:
Lightflow can control the xperia logo ?
Sorry idon't answer to your quetion
Click to expand...
Click to collapse
Haha. Is ok. :laugh: Can. Under setting there is a additional leds found. There will show led light that found on your device and set it as notification light even your screen backlight.
joonlin said:
Haha. Is ok. :laugh: Can. Under setting there is a additional leds found. There will show led light that found on your device and set it as notification light even your screen backlight.
Click to expand...
Click to collapse
I had problems with Lightflow as well. It was installed when I updated and seemed to work ok until I turned on Stamina. Then my flashing green notification that I have to tell me phones on and in signal, stopped and it was flashing a really slow and dim pinkish colour even though there was nothing set to that. Soon after that though I was hit by charging bug so I repaired software and factory reset only to still be hit by the charging bug.
I'm waiting for the UK unbranded software to come out now so I can install that and reinstall apps and do a proper test. I refuse to play about much when i'm going to have to reflash my correct software in the next few days (weeks... months... whatever). Sony need to pull their finger out with this one now. It's beyond understanding why they would do half a roll out on a Friday afternoon then not continue it first thing on Monday.
Starting a week back, I realised that my non-root non-customised phone is experiencing these three problems:
- Unknown LED notification, unable to find out what is the notification for, only way to solve it is to reboot the phone (happened twice)
- Adaptive brightness no longer auto adjust itself
- Screen is supposed to timeout and go dark after 5 minutes, but no longer does that
I did not tweak/change/install/uninstall any system option or app...: confused:
All I can say is do a clean install of software using PC Companion.
Regards,
~J2C
I got my R1 HD recently. After I set up everything I noticed that when the screen is off, no matter whether I received an email, a sms or a missed call, the LED light just didn't flash. The phone did notify by sound and I can see items in status bar when I turn on the screen.
I looked at everything in the Settings, but couldn't find anything wrong. I called R1 representative and he said he never heard such issue before.
Then I ordered a replacement from Amazon and it arrived today. You know what, same thing happened! No LED light for notification. Just sound notification.
The only time I know there is an LED light is when I charge the phone (red) or when it's fully charged (green).
Has anyone seen such issue before? I greatly appreciate the help!
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Thanks for the reply! I did try Lightflow, but it didn't help. In test mode or real mode, what I got was just a status bar notification, no LED.
yaconsult said:
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Click to expand...
Click to collapse
I did have to change some settings for it to work with the Blu phone.
These are the settings I am using that allow apps to turn on the LED:
Under General settings, the following are checked:
Enable Light Flow
Show LED in priority mode
Device Admin
Enable Clear all
Accessibility check
Version upgrade reminder
Under Device settings and root, the following are checked:
Direct mode
Root mode
Run every command as root
Show LED with screen on
Nexus 5 force LED reset
I also have light flow enabled under settings->accessability and lightflow has root permission in supersu.
Oh so I have to root the phone? I just called Blu customer service, and they told me I need to do a factory reset..
Try it and let us know what happens, please. Some phones require root and others don't. I reflashed and rooted and xposed mine before I did anything else so I don't know if it works without root or not.
Solved! Did a hard reset (not factory data reset thru Settings) by pressing power button and volume up together to enter the recovery menu. I cannot believe Amazon/Blu missed such an important step that the customer has to do it by themselves..
Same here bit in a Blu vivo 5R in this case.
So... I need to execute a Factory Reset? And then appears the option for LED notification And works.
Hi ! I did buy a BLU VIVO XL2. No LED activity for notifications. I have the options for LED behavior (Settings/Advanced Settings/Under Hardware title, LED indicator, Notification Reminder ON but green LED never flashes when expected. Factory Reset tried: I used Volume Up & Power Button to get recovery menu. There, I took a backup (SD storage, no compression, several chunks of data). After that, I selected Factory Reset. When rebooted, Google did his automatic restore of phone. After that, I tried Restore from Recovery menu, but a msg informed backup was corrupted, so, I did get a full Factory Reset status, with my phone memory user data lost. NO LED Notifications working after all these actions !!!!! . LED is alive, when reporting Power status, so it is not HW damaged. I will keep fighting to get my LED notification activity working... Regards, Norberto !!!
Try the free version of LightFlow from the play store. It will allow you to test and turn individual notifications on or off. The light can on display red and green colors and the red is very much brighter than the green. Mine turns flashing red when I miss a phone call on the Blu R1 HD>
Hi !! Thnx yaconsult. I did try free & legacy, unsuccessfully. Have a good day !!
I guess the Vivo works differently, then. The notification light works ok on my R1. If I miss a call, I get a blinking red light.
Hi,
I like my new P9 so far, but I got a problem with the LED-notifications. The LED-light does light when I'm charging the device, but when I receive a new notification the LED doesn't turn on. The notifications are there though, when I unlock the device, but no LED.
Yes, I do have the option enabled at the option 'notification and status bar'. Does anyone else encounter this problem? I'm running the latest Nougat-firmware (B386).
Thanks in advance!
Remy
EDIT: I was using the Do not desturb mode. Is it possible that this function disables the LED notification?
Do a factory reset
Hi,
Any idea why notification led not working for apps like Google sms app and many other apps. Is it related to Android 10 or is it specific to Rog 3 ?
Regards,
I have the same problem. LED notifications on back only work in certain applications, such as sms. In massanger from facebook it is so that when the notification comes, the first time the LED on the back does not flash. however, when I wake up the screen and lock it immediately in such a way that I will not read the notification, only then the back LED blinks.
any ideas?
sry for me english
ps: i did factory reset