Related
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Nobody?
Enviado de meu HTC One usando Tapatalk
ksarius said:
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Click to expand...
Click to collapse
1- no need to be relocked/locked with S-Off
2- error 140? (i thought it would give error 155), but anyway, it's due hboot 1.55, you need to first & separately downgrade hboot to 1.44, check my guide in my signature in post #1 there's the hboot download link and instructions.
DO NOT GO S-ON!
ksarius said:
Hello guys,
My wife tried to do the OTA update, but the phone had custom rom and the phone is now bricked.
It is relocked and s-off
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (Developer Edition)
and RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.exe (Developer Edition)
However, none of them worked. It gives me error 140: bootloader version error. I know it has something about downgrading, but im not sure what to do.
its been 5 hours since Im trying to unbrick it, but unsuccessful so far.
I will greatly appreciate any solution.
here are some info of the phone.
version-bootloader: 1.55
version-baseband: 4A.20.3263.16
version-main: 3.22.1540.1
platform: HBOOT-8064
modelid: PN0712000
cidnum: BS_US001
thank you.
Click to expand...
Click to collapse
there is a 3.22.1540.1 ruu on thcdev,com that use hboot 1.55 here
select the filter model to ''one'' and carrier to ''brightstar'' and it should be the fisrt option in the list
thanks guys!....actually i wrote it wrong. My phone is not s-off!......its s-on.
Anyway I will try what you guys said and ill report it back. thanks!
ksarius said:
thanks guys!....actually i wrote it wrong. My phone is not s-off!......its s-on.
Anyway I will try what you guys said and ill report it back. thanks!
Click to expand...
Click to collapse
I am downloading the RUU 3.22.1540.1 right now and see if it works. If it doesnt, is it possible to s-off without a rom in my phone?
I tried revone, but i needed the phone to be working. How about rumrunner?
Because that way, I could downgrade and then finish the work.
Right now all I can do with the phone is get to bootloader and twrp recovery.
Thanks
ksarius said:
I am downloading the RUU 3.22.1540.1 right now and see if it works. If it doesnt, is it possible to s-off without a rom in my phone?
I tried revone, but i needed the phone to be working. How about rumrunner?
Because that way, I could downgrade and then finish the work.
Right now all I can do with the phone is get to bootloader and twrp recovery.
Thanks
Click to expand...
Click to collapse
first try the ruu you are downloading
revone will only work with hboot 1.43 - 1.44. you have to use rumrunner to s-off hboot 1.55 with a rom like arhd 31.6 or cyanogenmod 10 (because of their unsecured kernel)
or you can also go back to stock with a guru reset rom which you can adb push to the device and install via custom recovery.
alray said:
first try the ruu you are downloading
revone will only work with hboot 1.43 - 1.44. you have to use rumrunner to s-off hboot 1.55 with a rom like arhd 31.6 or cyanogenmod 10 (because of their unsecured kernel)
or you can also go back to stock with a guru reset rom which you can adb push to the device and install via custom recovery.
Click to expand...
Click to collapse
thanks! the RUU worked!....now leaving the phone stock
ksarius said:
thanks! the RUU worked!....now leaving the phone stock
Click to expand...
Click to collapse
:highfive:
now you can update via ota to 4.06.1540.3 without any issue
If anyone has some time to spare, I could really use some individual guidance.
I just purchased a used HTC One, it had 4.1.2 on it and would not update so I unlocked it and rooted it.
Now though, I keep getting stuck no matter what I try...
I've been trying to get S Off, I have the 1.44 version of hboot I think it's called, and CWS_001 and PN0712000. I can't get S Off to work, even after updating to 4.2.2, now my wifi will not connect. I keep getting stuck in boot loop, or TWRP will not load. I've tripped the 'tamper' flag and would like to get rid of that.
I'm just not familiar enough with all the instructions to purposefully move from where I'm at to where I want to go. I would like to have 4.4 eventually and be unlocked and rooted with a custom ROM with no HTC overlay.
If there is any chance anyone would be willing to walk me through, I would greatly appreciate it. My S3 is working fine so I'm not desperate, but getting there quickly.
Thank you.
I've spent the last 12 hours going around in circles, my Chrome browser looks like 100 tabs are open across the top with all the pages I've been reading trying to figure this thing out. I feel like an idiot about now. Anyways, thanks to anybody for considering helping ahead of time.
bubsnews said:
If anyone has some time to spare, I could really use some individual guidance.
I just purchased a used HTC One, it had 4.1.2 on it and would not update so I unlocked it and rooted it.
Now though, I keep getting stuck no matter what I try...
I've been trying to get S Off, I have the 1.44 version of hboot I think it's called, and CWS_001 and PN0712000. I can't get S Off to work, even after updating to 4.2.2, now my wifi will not connect. I keep getting stuck in boot loop, or TWRP will not load. I've tripped the 'tamper' flag and would like to get rid of that.
I'm just not familiar enough with all the instructions to purposefully move from where I'm at to where I want to go. I would like to have 4.4 eventually and be unlocked and rooted with a custom ROM with no HTC overlay.
If there is any chance anyone would be willing to walk me through, I would greatly appreciate it. My S3 is working fine so I'm not desperate, but getting there quickly.
Thank you.
I've spent the last 12 hours going around in circles, my Chrome browser looks like 100 tabs are open across the top with all the pages I've been reading trying to figure this thing out. I feel like an idiot about now. Anyways, thanks to anybody for considering helping ahead of time.
Click to expand...
Click to collapse
You have an AT&T HTC one
it's very simple to update it to 4.3 >> Download This
all you need is this one file and read the instruction Here
clsA said:
You have an AT&T HTC one
it's very simple to update it to 4.3 >> Download This
all you need is this one file and read the instruction Here
Click to expand...
Click to collapse
Thank you! So, there is no requirement for root, locked/unlocked, previous/installed ROM etc??? Doesn't care what build of my HTC ONE or anything?
Sounds too good to be true.
Will I still be rooted and unlocked afterwards?
Is this a stock ROM?
Downloading now, thanks for the help.
bubsnews said:
Thank you! So, there is no requirement for root, locked/unlocked, previous/installed ROM etc??? Doesn't care what build of my HTC ONE or anything?
Sounds too good to be true.
Will I still be rooted and unlocked afterwards?
Is this a stock ROM?
Downloading now, thanks for the help.
Click to expand...
Click to collapse
It's not a Rom it's a RUU
It's full factory reset it wipes everything and updates the firmware
sent from my recliner
clsA said:
It's not a Rom it's a RUU
It's full factory reset it wipes everything and updates the firmware
sent from my recliner
Click to expand...
Click to collapse
"Sent from my recliner" Well played Sir...
I see by your signature, you are exactly where I want to be. I too have the CSW_001 version. I was up until 2 this morning messing with it so I'm 'off' for the night but will be up bright and early following your suggestion, thank you for that.
Might I still find you in your recliner should I happen to falter? I'm hoping that after this works, I can put my One in the same condition as yours, S Off etc...
Any further pointers on that score? You know exactly the state my One will be in after I get done with your previous advice.
Thanks again, I really appreciate your assistance.
Yeah I'll be here
sent from my recliner
clsA said:
Yeah I'll be here
Click to expand...
Click to collapse
Because ViperOne 5.0 is so new it's going to take a couple of steps for you to get to where I am.
I'm going to use @nkk71 SuperGuide from here http://forum.xda-developers.com/showthread.php?t=2541082.
Lets see If I can get this in the right order
First lets get all the files together before you start
Download
the RUU.exe
TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_boo...reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/show....php?t=2527194)
Get Both rumrunner and firewater to get S-Off: http://firewater-soff.com/ and http://rumrunner.us/
I Recommend having ARHD 31.6 for Getting s-off >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip
and finally download your ViperOne 5.0 Rom
I'm going to alter the steps somewhat from the above guide because of what you have already done to the phone.
as I understand it your already on 4.2.2 from 4.1.2 is this correct?
here's the steps using the above files
Run the 3.17.502.3 RUU for AT&T (don't bother setting up the phone much your going to loose everything in the next step)
Unlock the bootloader again @ HTCDEV.com
Reboot to bootloader (fastboot USB)- Flash the 2.6.3.3 TWRP Recovery
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Boot into Recovery and flash ARHD 31.6 (again use minimal setup your not going to be here long)
Get S-off (rumrunner should work fine / or just go with firewater your choice)
next is the Guru reset to remove the Tampered flag ... don't lock the bootloader.
and last step is flash ViperOne 5.0 and Enjoy your new phone
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
clsA said:
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
Click to expand...
Click to collapse
Sounds good to me :good: :good: :laugh:
(there's also a ruu.zip just in case)
Good luck OP :fingers-crossed:
clsA said:
Because ViperOne 5.0 is so new it's going to take a couple of steps for you to get to where I am.
I'm going to use @nkk71 SuperGuide from here http://forum.xda-developers.com/showthread.php?t=2541082.
Lets see If I can get this in the right order
First lets get all the files together before you start
Download
the RUU.exe
TWRP 2.6.3.3 >> http://techerrata.com/browse/twrp2/m7
Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_boo...reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/show....php?t=2527194)
Get Both rumrunner and firewater to get S-Off: http://firewater-soff.com/ and http://rumrunner.us/
I Recommend having ARHD 31.6 for Getting s-off >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip
and finally download your ViperOne 5.0 Rom
I'm going to alter the steps somewhat from the above guide because of what you have already done to the phone.
as I understand it your already on 4.2.2 from 4.1.2 is this correct?
here's the steps using the above files
Run the 3.17.502.3 RUU for AT&T (don't bother setting up the phone much your going to loose everything in the next step)
Unlock the bootloader again @ HTCDEV.com
Reboot to bootloader (fastboot USB)- Flash the 2.6.3.3 TWRP Recovery
Boot into Recovery and flash ARHD 31.6 (again use minimal setup your not going to be here long)
Get S-off (rumrunner should work fine / or just go with firewater your choice)
next is the Guru reset to remove the Tampered flag ... don't lock the bootloader.
and last step is flash ViperOne 5.0 and Enjoy your new phone
Note: I typed most of this from memory and if I missed any important steps Please feel free to correct me @nkk71 :good:
Click to expand...
Click to collapse
Wow, this is great! Just what I need, step by step by step. Like when the golfer hits something up there a couple of inches and the announcer proclaims, "Even I could make that putt." Thank you.
Now, I'm going to give you an opportunity to look your instructions over again while I'm downloading the V1 5.0 ROM (or, another RUU?) (What's the difference btw?) and the ARHD 31.6 file (I'm on lowly 12mb connection so going to take me 40 minutes) before I get started. I already had the other files.
I'm following your instructions blindly so if you've missed something, I'm hosed (I don't want to be hosed, tyvm).
Is that enough?
bubsnews said:
Wow, this is great! Just what I need, step by step by step. Like when the golfer hits something up there a couple of inches and the announcer proclaims, "Even I could make that putt." Thank you.
Now, I'm going to give you an opportunity to look your instructions over again while I'm downloading the V1 5.0 ROM (or, another RUU?) (What's the difference btw?) and the ARHD 31.6 file (I'm on lowly 12mb connection so going to take me 40 minutes) before I get started. I already had the other files.
I'm following your instructions blindly so if you've missed something, I'm hosed (I don't want to be hosed, tyvm).
Here are the particulars, phone state as of right now...
4.2.2
HTC Sense 5.0
CID CWS_001
MID PN0712000
Software MaximusHD 11.0.0
HTK SDK API 5.34
Kernel
3.4.10-g28df0d6
[email protected] #1
SMP PREEMPT
Baseband 4A.17.3250.20_10.441150.04L
Build 2.24.401.8 CL235216 release-keys
Browser WebKit/534.30
Is that enough?
Click to expand...
Click to collapse
Yeah the instruction are fine
run the RUU and get your bootloader unlocked and twrp installed while your downloading ARHD and viperOne
clsA said:
Yeah the instruction are fine
run the RUU and get your bootloader unlocked and twrp installed while your downloading ARHD and viperOne
Click to expand...
Click to collapse
Snag #1, ERROR [155]: UNKNOWN ERROR
Please get the correct TOM Update Utility and try again.
bubsnews said:
Snag #1, ERROR [155]: UNKNOWN ERROR
Please get the correct TOM Update Utility and try again.
Click to expand...
Click to collapse
post your results for fastboot getvar all ( - SerialNo and IEMI )
clsA said:
post your results for fastboot getvar all ( - SerialNo and IEMI )
Click to expand...
Click to collapse
Well, not sure what to do though, the error claims my phone should be in one of two states, either rebooted (no) or black screen with HTC logo and 4 exclamation marks in the corners of the screen (no either). I have the HTC logo but no exclamation points.
The options given by the program are EXIT if phone has rebooted or NEXT to start recovery process.
Not sure which I should choose...
bubsnews said:
Well, not sure what to do though, the error claims my phone should be in one of two states, either rebooted (no) or black screen with HTC logo and 4 exclamation marks in the corners of the screen (no either). I have the HTC logo but no exclamation points.
The options given by the program are EXIT if phone has rebooted or NEXT to start recovery process.
Not sure which I should choose...
Click to expand...
Click to collapse
Error 155 usually means your using the wrong RUU
which means you phone is not CID CWS_001
MID PN0712000. not sure how you got that info
Just exit the update utility
then post your "fastboot getvar all" ( excluding SerialNo and IEMI )
clsA said:
Error 155 usually means your using the wrong RUU
which means you phone is not CID CWS_001
MID PN0712000. not sure how you got that info
Click to expand...
Click to collapse
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
bubsnews said:
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
Click to expand...
Click to collapse
Stop !!
if your going to download again we need to change the file
post your getvar so we can continue
bubsnews said:
I can't remember exactly but I did run something and that was returned, I wrote it down.
I use Chrome (I've heard others having problems with Chrome and large file downloads) so I'm downloading that RUU again using IE.
I'm going to hit NEXT to start recovery process.
Will getvar once done, if I can...
I'm positive about the CWS_001 etc...
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.20
version-cpld: None
version-microp: None
version-main: 1.26.502.15
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: CWS__001
battery-status: good
battery-voltage: 4311mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
bubsnews said:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.17.3250.20
version-cpld: None
version-microp: None
version-main: 1.26.502.15
version-misc: PVT SHIP S-ON
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: CWS__001
battery-status: good
battery-voltage: 4311mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
Click to expand...
Click to collapse
ok 2 things did you MD5 check the the RUU.exe ?
and did you hard reboot the phone after the RUU failed
it looks like it's still in RUU mode (last line in your getvar)
clsA said:
ok 2 things did you MD5 check the the RUU.exe ?
and did you hard reboot the phone after the RUU failed
it looks like it's still in RUU mode (last line in your getvar)
Click to expand...
Click to collapse
I did not check MD5 (I know I've done that before but not very familiar, instructions?) (I am downloading that file again with IE, almost done).
I did not reboot the phone, only exited the program as instructed and ran getvar.
I'm a complete newbie to this XDA so would appreciate any help possible.
My HTC One is Bricked and wont go beyond the HTC logo screen.
I've look at all the different forums and threads and I cant find one particular thread to guide me through the process.
The simplest way I can tell to get my phone back to stock without rooting and doing s-off is to use a ruu file, but I cant find one any where for my phone.
Can anyone help or point me in the right direction:
MEID PN0711000
HTC_621 (TW)
3.63.709.3
HT3AJW906862
356376050293921
abreu6 said:
I'm a complete newbie to this XDA so would appreciate any help possible.
My HTC One is Bricked and wont go beyond the HTC logo screen.
I've look at all the different forums and threads and I cant find one particular thread to guide me through the process.
The simplest way I can tell to get my phone back to stock without rooting and doing s-off is to use a ruu file, but I cant find one any where for my phone.
Can anyone help or point me in the right direction:
MEID PN0711000
HTC_621 (TW)
3.63.709.3
HT3AJW906862
356376050293921
Click to expand...
Click to collapse
There is an RUU for your One. The only issue is that ur S-ON and the RUU is for a lower firmware version than the one you have. To flash the RUU, you will have to downgrade your firmware, which needs S-OFF
Post the output of your getvar all. It'll help a lot
And do u have custom recovery?? What exactly did you do which bricked the phone ??
raghav kapur said:
There is an RUU for your One. The only issue is that ur S-ON and the RUU is for a lower firmware version than the one you have. To flash the RUU, you will have to downgrade your firmware, which needs S-OFF
Post the output of your getvar all. It'll help a lot
And do u have custom recovery?? What exactly did you do which bricked the phone ??
Click to expand...
Click to collapse
Hello, Thanks for helping out. I have a taiwan build of the phone, for some reason I got the message prompt to upgrade to kitkat and sense 5.5 ( the release isnt officially out in my region) I'm thinking I got it because of the firmware build of my phone, once i tried to upgrade thats where the stall happened.
To get S-Off i need to root my phone from my understanding is this correct ? I dont have a custom recovery will post the get var here.
Thanks again.
Since you bricked your phone, I'm going to safely assume you were at least on an unlocked bootloader. If that's the case, you can download the TWRP recovery image onto your PC and boot into it off your phone with the fastboot command "fastboot boot (recovery name).img". Once there, you can go to TWRP's advanced settings and turn on ADB sideload to install a ROM. After that's done, go back into fastboot and flash the boot.img from the ROM separately before booting the ROM for the first time (since you're S-ON). That should get your phone back on.
My friend did the same thing the other day and that was how I got theirs working again.
Sent from my HTC One using xda app-developers app
decayer177 said:
"fastboot boot (recovery name).img".
Click to expand...
Click to collapse
That only works on hboot 1.44, "fastboot boot ...." was patched/broken after 1.44.
decayer177 said:
After that's done, go back into fastboot and flash the boot.img from the ROM separately before booting the ROM for the first time (since you're S-ON).
Click to expand...
Click to collapse
That's not needed on the M7, it'll get flashed automatically during the install even with S-On.
decayer177 said:
Since you bricked your phone, I'm going to safely assume you were at least on an unlocked bootloader. If that's the case, you can download the TWRP recovery image onto your PC and boot into it off your phone with the fastboot command "fastboot boot (recovery name).img". Once there, you can go to TWRP's advanced settings and turn on ADB sideload to install a ROM. After that's done, go back into fastboot and flash the boot.img from the ROM separately before booting the ROM for the first time (since you're S-ON). That should get your phone back on.
My friend did the same thing the other day and that was how I got theirs working again.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help, no its locked and not tampared. I'm guessing i do all of the above but unlook my bootloader first.
abreu6 said:
Thanks for the help, no its locked and not tampared. I'm guessing i do all of the above but unlook my bootloader first.
Click to expand...
Click to collapse
Which RUU file do you recommend I can downgrade to. The version I have is 3.63.709.3 is there a site with ruu files. I have the latest ota file from the htc website, is the ruu file in there ?
Will try the procedure today and re post here.
abreu6 said:
I'm a complete newbie to this XDA so would appreciate any help possible.
My HTC One is Bricked and wont go beyond the HTC logo screen.
I've look at all the different forums and threads and I cant find one particular thread to guide me through the process.
The simplest way I can tell to get my phone back to stock without rooting and doing s-off is to use a ruu file, but I cant find one any where for my phone.
Can anyone help or point me in the right direction:
MEID PN0711000
HTC_621 (TW)
3.63.709.3
HT3AJW906862
356376050293921
Click to expand...
Click to collapse
Here's a copy of my getvar, -
Version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.213263.04
version-cpld: None
version-micorp: None
version-main: 3.63.709.04
version-misc: PVT SHIP S-On
serialno:HT3AJW906862
ProductL m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC_621
battery-status: low
battery-voltage: 3475mV
partition-layout: Generic
security: on
build-mode:SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-a448e85a
hboottpreupdate: 11
gencheckpt: 0
i tried to get my phone fixed but because its cross region nothing htc can do, and cost is as much as value of the phone. Will try all the tips here and repost. Thanks for everyone's help. Really appreciate it, this is a great forum
If anyone else has any other suggestions let me know.
nkk71 said:
That only works on hboot 1.44, "fastboot boot ...." was patched/broken after 1.44.
That's not needed on the M7, it'll get flashed automatically during the install even with S-On.
Click to expand...
Click to collapse
Yup the fastboot thingy doesnt work, anyother way i can use twrp if this is required. Unlocked my boot loader, are there any short cuts in this. Cant I just unlock, s-off and download any of the latest ruu files to bring my phone back to life ?
abreu6 said:
Yup the fastboot thingy doesnt work, anyother way i can use twrp if this is required. Unlocked my boot loader, are there any short cuts in this. Cant I just unlock, s-off and download any of the latest ruu files to bring my phone back to life ?
Click to expand...
Click to collapse
not right now, too sleepy, but i highly recommend you (and everybody else that quoted you) edit your posts and remove IMEI ... that information should NOT be shared publicly!
nkk71 said:
not right now, too sleepy, but i highly recommend you (and everybody else that quoted you) edit your posts and remove IMEI ... that information should NOT be shared publicly!
Click to expand...
Click to collapse
will do, didnt realize i did that, thanks !
nkk71 said:
not right now, too sleepy, but i highly recommend you (and everybody else that quoted you) edit your posts and remove IMEI ... that information should NOT be shared publicly!
Click to expand...
Click to collapse
All removed, when i do the fastboot devices, the scrambled reply comes up which means im connected, but getvar all brings back nothing. I worried I may have done something wrong. Thanks
HTC one bricked
INFOversion-bootloader: 1.56.0000
INFOversion-baseband: 4A.23.3263.28
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA34MW909277
INFOimei: 354439059885634
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: BS_US001
INFObattery-status: good
INFObattery-voltage: 3882mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-4dab9d12
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
please help me out. I am using custom rom now .... no network .... no baseband. i am also confused that ruu is for me... i tried one but failed
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Stefan0vic said:
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Click to expand...
Click to collapse
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
clsA said:
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
Click to expand...
Click to collapse
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Stefan0vic said:
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Click to expand...
Click to collapse
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
clsA said:
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
Click to expand...
Click to collapse
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Stefan0vic said:
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Click to expand...
Click to collapse
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
and no you have hboot 1.56 after the RUU step
the hboot 1.44 insures the RUU will work smoothly
it's also a vital step if you want to remove tampered and show locked instead of relocked
to return for repair
clsA said:
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Saw you edited your post, thank you so much
Stefan0vic said:
I'll just keep my pc on for a bit Thank you so much for your help.
Just 1 more question, will my bootloader be updated with the RUU itself? I need the phone as much stock possible since I need to give it for warranty for camera replacement.
Click to expand...
Click to collapse
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Method 2: Guru Bootloader Reset, more automated, but may freeze
adb push Guru_Bootloader_Reset_1.0.zip /data/media/
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader"; once finished: continue with below reboot command
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Click to expand...
Click to collapse
clsA said:
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Click to expand...
Click to collapse
I dont have the tampered flag so i guess i dont have to do that,
I will use that to get my bootloader locked though, thank you. RUU is still downloading as we speak but I can almost run it
So its:
1. Flash hboot
2. lock bootloader
3. run RUU?
Help!! It returns me with an image fault!!
Error: 158 !
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
don't panic .. just use a different ruu
clsA said:
don't panic .. just use a different ruu
Click to expand...
Click to collapse
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
ERROR [130]: MODEL ID ERROR
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Sent from my HTC One using XDA Premium 4 mobile app
I know what the error means, but I don't know what RUU I need, i thought it accepted everything since I was s off
Stefan0vic said:
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Click to expand...
Click to collapse
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
File Size: 1.5 GiB - Downloads: 69507
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
after 69,000 plus downloads you think someone would report if it's a bad file
clsA said:
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
after 69,000 plus downloads you think someone would report if it's a bad file
Click to expand...
Click to collapse
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Stefan0vic said:
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Click to expand...
Click to collapse
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
clsA said:
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
Click to expand...
Click to collapse
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Stefan0vic said:
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Click to expand...
Click to collapse
well if you flashed the 1.44 hboot your pc must work in fastboot
what state is the phone in when you run the RUU ? bootloader / recovery / Android OS ?
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
FowlMouthedDuck said:
Hey Guys,
I am pulling my hair out trying to return my HTC one M7 back to stock. Selling it to a friend that knows nothing about rooting and is not tech savy.
Anyways I cant seem to get the RUU to do. I have the correct file (I am with Rogers in Canada) that is the most up to date (see pictures).
I keep getting the Error 158 Image Error when I run the setup.
My phone is Locked as well which i know is the main cause for this error.
I am also running HD Revolution 84.0 at the moment.
I also set the CID to 11111111, hoping this might fix it but no luck
Any help is most appreciated.
Click to expand...
Click to collapse
I should also note I am running TWRP v2.8.4.0
FowlMouthedDuck said:
I should also note I am running TWRP v2.8.4.0
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number please.
Seanie280672 said:
post your fastboot getvar all please without imei and serial number please.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
FowlMouthedDuck said:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 4A.20.3263.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum: 11111111
battery-status: good
battery-voltage: 4256mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
Click to expand...
Click to collapse
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Seanie280672 said:
Ok never mind, version main is missing, I suggest you find the firmware and flash that first then whilst still in the bootloader with fastboot USB on the screen, run the RUU
Click to expand...
Click to collapse
Where is the best spot to download the firmware?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Seanie280672 said:
you should be able to pull it from the ruu, when you start the ruu and it extracts itself, make sure your computer is showing hidden files and folders then goto C:\users\(your user name)\app data\ local\(lots of strange characters and numbers folder) before closing the RUU and copy the firmware to a different location on your computer.
However, also as your s-off, you are aware you can flash any RUU like the 401 (WWE) or developer edition, its all stock.
Click to expand...
Click to collapse
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
FowlMouthedDuck said:
Where is the best spot to download the firmware?
Click to expand...
Click to collapse
Your hboot 1.44 means the firmware has never been updated or did you put that their returning to stock ?
Maybe try an older RUU like >> http://forum.xda-developers.com/showthread.php?t=2529225
FowlMouthedDuck said:
1. Is it in the Temp folder?
2. if It flash one of those RUU's, can I still update to Lollipop when it is available?
Click to expand...
Click to collapse
Yup, dev edition will be the first to get it too.
Seanie280672 said:
Yup, dev edition will be the first to get it too.
Click to expand...
Click to collapse
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Click to expand...
Click to collapse
Will this still allow the phone to be unlocked and switched to another carrier here in Canada? (ex. rogers to telus).
FowlMouthedDuck said:
Is it the Rom.zip file? When I tried to copy to the phone in windows 7 to the phone, it just gives me a "Cannot copy item" msg. The device has either stopped responding or has been disconnected.
I am thinking maybe the dev edition might be the best bet because my friend might be switching to another carrier instead of Rogers
Click to expand...
Click to collapse
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
clsA said:
then try here >> http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
theirs also a RUU here 6.07.1540.2 >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
Also their is no Firmware.zip in a RUU their found in OTA update packages
Click to expand...
Click to collapse
sorry missed this, thanks :good:
Seanie280672 said:
well if you go to dev edition be sure to note clsA link incase of any problems and you have to return it to Rogers.
also need to know if you backflashed your HBOOT to 1.44 yourself ?
---------- Post added at 09:51 PM ---------- Previous post was at 09:45 PM ----------
sorry missed this, thanks :good:
Click to expand...
Click to collapse
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
FowlMouthedDuck said:
Can to simply take the firmware from the OTA? If so, do I install the .zip like any ROM? Because I am trying to do that and as soon as I hit install in TWRP, it just reboots the recovery.
And yes I did backflash the HBOOT. I believe i had to do it when I had the lastest Viperone rom installed.
Click to expand...
Click to collapse
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
FowlMouthedDuck said:
Disregard my last post. I forgot you had to use fastboot to update firmware. So I used the firmware.zip from the OTA. Now after rebooting, i get no display. I still have my usb plugged in and I can hear windows connecting and disconnecting but nothing is happening when I hold down power
Click to expand...
Click to collapse
Crap .. what firmware did you flash ?? and you never answered how did you get to hboot 1.44
you have to flash those OTA firmware.zip in order 3.x to 4.x to 5.x to 6.x ... you cant just jump to the newest firmware
when you plug in your phone check device manager for QHSUSB_DLOAD
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
FowlMouthedDuck said:
Oops I forgot to finish my post. I did downflash the hboot when I downloaded the latest viperone rom (i think it asked me to if I remember correctly).
So device manager has QHUSB_DLOAD, what should i do with it?
Sorry for all the headaches. I am still a little new to the firmware stuff and going back to stock
Click to expand...
Click to collapse
Yeah that sucks .. hope you can make this work
http://forum.xda-developers.com/showthread.php?t=2770684
FowlMouthedDuck said:
So I used the firmware.zip from the OTA.
Click to expand...
Click to collapse
you should be able to pull it from the ruu
Click to expand...
Click to collapse
he said, not from an ota. Ota fimware are only patches and must be flashed incrementally like clsA said.
So device manager has QHUSB_DLOAD, what should i do with it?
Click to expand...
Click to collapse
Looks like you make the situation worse. you could have avoided that by following what they said... :angel:
Now follow this guide: http://forum.xda-developers.com/showthread.php?t=2770684