I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
I know there are some recent roms being created that has the call blocking feature built in. i'm using one those roms, which is indicated in my signature. when u mentioned that you've tried them (call blocking applications) all, were they free and/or commercial apps, or apps created in the development/hacking section? Collectively speaking, there's alot of those types of applications floating out there, but maybe you've already tried those.
pheroah said:
I have been looking for this since I first started using Windows Mobile.
Unfortunately, most of the softwares out there (because they are not built into the ROM) can not reject calls without the other side knowing. I have tried every software out there, all of them are the same, the caller will hear a ring, or part of a ring, then they will get a busy signal (rejected).
I can't believe this is hard to create, I use to have it 12 years ago in my BASIC alcatel phone. When a black listed caller dials, they get nothing .. or get an out of coverage message from the operator. I believe the way it worked, is that the phone detects the caller number, BEFORE responding that it has acknowledged the call and is ringing.
I guess that is why I am saying that it is built in to the ROM as a driver or something, and not just a software.
Any Ideas, thoughts, where I can find this, anyone WILLING to make it ?
Click to expand...
Click to collapse
1st off, change your number
if that doesn't suite your needs make a fake dial tone which states your number is not in service as your voicemail while using call firewall. after a few weeks the person will give up calling you. Callers will receive one full ring and it will go to your new fake voicemail after blocking them, which they will perceive as your phone being turned off or changed your number.
common sense now pay me.
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
As I said before, the only device I saw that feature on, was the really old alcatel models; which didn't give you a ring, didn't give you a busy tone, probably just ignored the request coming in from the telco when it is one of the black listed numbers.
Nice try, but I would pay you, if you could do the same on windows mobile. By the way I was testing an alpha versio of the cruise before it was launched, and it actually (accidently) opened the speaker, before you actually picked up the phone call, so the other side could hear you, before you even answer.
Thus, I am sure these things are possible, if there is someone who has the knowledge, and power to play with the operator
I haven't tried anything comercial, didn't find what i was looking for. If you know of any comercial software or freeware that does what i am stating. i.e. doesn't ring before it blocks the call. That would be great
I have something called MAGICALL, and it works great. You can set it to pick up then hang up, however the best part is that the call doesnt "come through" or let the phone ring. Unless you specify the software to give you a pop up message indicating it blocked a call. I love it since it doesnt even let the phone ring, its like if you never got called.
Same thing, I already tried MagiCall and it rings once to the caller, and then disconnects. Very obvious that you are avoiding the person.
I currently use a free voicemail feature called YouMail, which has call filtering and call blocking features. You can block calls (I believe) and also create a unique voicemail greetings for those you want/trying to avoid as well. www.youmail.com
I also use magicall for this. As an action I choose 'ignore' and then the caller just hears the phoen ringing, the connection is not broken. And you, well you hear and see nothing so you are not disturbed. Is that not what you want/?
Not exactly, ignore is a nice feature if you dont' want to be disturbed, but if someone is constantly bugging you; you would like them not to even reach your phone (so they don't come next day in the office, and say I left you three missed calls, and you didn't answer me).
It would be easier if they just got a this phone is out of coverage (or something similar) from the operator; then you can always blame the operator, that they couldn't reach you ... you get my drift ?
Yeah, I get your drift. But, if you're not reachable, then I guess it's the provider that sends back a message to the caller. I don't think your phone can send that message to the caller.
Moreover in most cases if you're not reachable then the caller also gets sent to your voicemail and he can also leave a message and come to you next day asking why you didn't react to his voice messages.
So the only option would be to send a message back saying that the number doesn't exist. But again, you would have to be able to spoof a provider based message for that.
I see these options when a caller really wants to get hold of you and you don't want to react:
* drop the call after 1 ring: caller notices he gets dropped, gets pissed an comes to see you
* send message back saying you're out of coverage: caller leaves message, which you ignore, caller gets pissed and comes to see you
* send a message back saying that the number doesn't exist: caller inquires whether you changed number, finds out you didn't, gets pissed and comes to see you
* silently ignore him: caller leaves a message, which you ignore, caller gets pissed and comes to see you.
Seems you're screwed either way
Why not simply answer the call and tell the caller to f*ck off. He's bound to get pissed also but at least he'll leave you alone and you'll feel relieved.
Well for one, I don't use voice mail ... secondly, because it is the provider that sends the message, it is authentic....
So if your mobile ... somehow ... ignores the call coming from the provider ... the provider sends a message saying that the mobile is out of coverage ...
pheroah said:
hahahah nice one .. except the keyword here is UNDETECTABLE ... if they know i changed my number or i am blocking them, they will find me and ask for the NEW number ....
Click to expand...
Click to collapse
Hmm, you're asking for someone to develop a piece of software because you have no spine? I know of no Java/.Net/etc API that is better than the truth. Tell the person to leave you be. The currently available call firewalls work great for when you need to be in a "Call Free Environment."
It has nothing to do with my spine; and I currently have NO ONE harasing me; but I believe that the current Call firewalls have a disadvantage, and lack a feature.
I wish there was someone in XDA-Developers who is willing to spend some time to make some adjustments to one of the ROMs to have this built in. Especially as this feature is available in historic phones that have a lot less features than a WM.
Im also using Magicall for this & its working great, the other party doen't even hear a ring. It has many other features too.
Hi,
I am getting annoyed with my Watch now as it doesn't seem to behave consistently.
Making a call via my phone using the watch:
I used to be able to say 'call <persons name>' to the watch and it would initiate the call on the Phone. No I just get a 'calling xyz' display/timer, that then does nothing.
Many Thanks,
Paul
Bloody annoying.
Sometimes it will ask me for an option where to call from.. Phone or watch.
I usually keep cellular off.
Text via google assistant does not work unless it's via phone sim. Stupid implementation. Hope they fix this.
Hey everyone,
I have a bit of a weird issue here. I have a note 8 from Verizon which everyone knows comes unlocked. I am using it on AT&T and everything works well except for one thing. For some reason when I receive phone calls from people, it shows on the screen with a + sign in front of the phone number. So if someone calls me that is in my contact book, it will not show their name since there is no + sign in my contact book. So also now in my call history if I try to call that number back it sounds like it is trying to make an international call. I have no idea what is happening. Data, texts and calls work but instead of getting a call from 9999999999 I get +9999999999.
Please help me out here, I love the phone!!
Zachary
I've read about this issue before. Googling 'incoming calls show +' gives you some leads.
In short it seems to be related to Dialling Assistance settings (note spell error, is as in settings...). I couldn't find those via the regular settings (used to be accessible via settings in Phone app), but I could via the app 'Shortcut Master (Light)' ...
Search for 'dialing' and then launch:
'com.android.phone.operator.usa.AssistedDialingActivity'. My settings (N950U1) are as per SS...
Try playing with these settings.
Hey all,
I have the LTE version of the watch 3. I have both bluetooth, WiFi & mobile all turn 'on'. When I walk away from my Samsung phone far enough, it disconnects bluetooth and then connects to mobile network.
This is great and all...but then all my past text messages from a conversation that i have already read (on my phone) from friends start popping up on my watch as if the messages were new.
Each message that gets updated causes the watch to 'beep'. So literally the phone is beeping like crazy. One episode i had, it beeped around 50 times as it was updating the watch with "new" messages.
I looked everywhere on help menu, online, etc...to see if there was an option to stop this...but came up empty handed.
Does anyone know how to make this stop?
I DO NOT want to disable bluetooth or mobile connection on my watch as a "work around". That kinda defeats the purpose of why I bought this LTE watch.
Please help!!!
Thanks
Hi @Maxwell_7007 - I'm having this exact issue. Did you ever find a resolution?