[ROM] Stock ROM Canvas Turbo Tweaked [PreRooted][Deodexed] - Micromax Canvas Turbo A250

Stock Rom Tweaked
Modded and Tweaked by @nrupesh2912
First ever Flashable Stock ROM For A250
Features:
-Android 4.2.1
-Rooted
-Zipaligned
-Deodexed
-Removed Unwanted Apps
-Init.d Support
-Few Build.prop tweaks
-Wifi Tweaks
-Faster Streaming Tweaks
-3G Tweaks
-More Free Ram Tweaks
-Signal Tweaks
-Bravia engine V3
-Xloud and Beats
-All stock A250 Features :
#Gestures
#Floating Apps
#Blow To Unlock
And Much More....
DOWNLOAD LINK
Steps:
1) Download ROM
2) Put into external/internal sd card
3) Go to CWM recovery
4) Take backup
5) Wipe data/factory reset
6) From advance menu do dalvik cache clear
7) Go in mount and storage select format system
8) Select install from SD card and flash rom
9) Wipe data/factory reset again & Reboot!!
Bugs:
No Bugs
Tell me If u find any
Credits:
Micromax For A250 Canvas Turbo
@nrupesh2912 (MEEE) : For this rom :laugh:
Kernel : Used Untouched Stock Kernel
Note :
I Will Not Be Responsible For Any Bricked Devices or Any Problem So Flash At Your Own Risk.​

ScreenShots
SS

Reserved

downloading now will give it a shot thanks :good:
been using this for two days no issues found works good camera is good.. signal strength is good.. one advice is remove spul and MMX sms registeration apk. everytime i rebooted my phone it sent a reg message to MMX costing Rs 1.30.

taus90 said:
downloading now will give it a shot thanks :good:
been using this for two days no issues found works good camera is good.. signal strength is good.. one advice is remove spul and MMX sms registeration apk. everytime i rebooted my phone it sent a reg message to MMX costing Rs 1.30.
Click to expand...
Click to collapse
I too tried the same ROM the registration asked for was only once... The rom is running fine yet just installed it 2 hrs ago.. rebooted 7 times manually to chk the registration thing but it asked it for the very first time n then did not ask . . .

USB OTG!
USB OTG doesn't work brother!

jvk8peru8 said:
USB OTG doesn't work brother!
Click to expand...
Click to collapse
Its works perfctly checked by me in my device !!!!
see the Screen shot attached .....

Oh.... Ok brother! I might miss something during installation. Ok I'll check again. Thanks for the quick reply.

jvk8peru8 said:
USB OTG doesn't work brother!
Click to expand...
Click to collapse
Make sure that your pendrive and OTG adapter both are working.

saurabh2012 said:
Make sure that your pendrive and OTG adapter both are working.
Click to expand...
Click to collapse
Mine too is working properly . . . screenshot attached . . .

Performance
However The performance level is not too good . . . please see screen shots . . . Though rest of the things are working fine....
Just want to know how to check Bravia engine?
Now I am also getting issues such as the data toggle for sims are not working fine unless u reboot . . .
Wifi is working however wifi blue colour not apprearing it still shows greyed out . . .
Play store dosent work properly after updating google play services.... so tried to remove update to old one but still not working . . .
One more issue found that is the phone soft reboots after installation of apps automatically . . .

nrupesh2912 said:
Stock Rom Tweaked
Modded and Tweaked by @nrupesh2912
First ever Flashable Stock ROM For A250
Features:
-Android 4.2.1
-Rooted
-Zipaligned
-Deodexed
-Removed Unwanted Apps
-Init.d Support
-Few Build.prop tweaks
-Wifi Tweaks
-Faster Streaming Tweaks
-3G Tweaks
-More Free Ram Tweaks
-Signal Tweaks
-Bravia engine V3
-Xloud and Beats
-All stock A250 Features :
#Gestures
#Floating Apps
#Blow To Unlock
And Much More....
DOWNLOAD LINK
Steps:
1) Download ROM
2) Put into external/internal sd card
3) Go to CWM recovery
4) Take backup
5) Wipe data/factory reset
6) From advance menu do dalvik cache clear
7) Go in mount and storage select format system
8) Select install from SD card and flash rom
9) Wipe data/factory reset again & Reboot!!
Bugs:
No Bugs
Tell me If u find any
Credits:
Micromax For A250 Canvas Turbo
@nrupesh2912 (MEEE) : For this rom :laugh:
Kernel : Used Untouched Stock Kernel
Note :
I Will Not Be Responsible For Any Bricked Devices or Any Problem So Flash At Your Own Risk.​
Click to expand...
Click to collapse
Hi,
can i flash this ROM on my rooted XOLO Q3000?

Related

[ROM][ARC|ARC S] [Hemiui_v2.2] [MULTI] [RTL] [GB] [V:2.2.17] [Update: 20/2/2012]

Introducing my customized MIUI Port .... Using BlendMIUI-Speed-porting-software ....
* You need unlocked bootloader Tutorial : http://forum.xda-developers.com/showthread.php?t=1133650
* I'm testing it right now ....if you find any bugs .... please let me know ....
* to get the camcorder to work put the settings to 720p.
* It's recommended to use Baseband 56 or 64 :http://www.mediafire.com/?b6ph27ry7vd5h7p
* Everything works for now ...Xloud And the bravia Engine is included with the script it self as a tweak . Again many thanks to jason stein and the other devs
* ICS theme used as Default and boot Animation changed.
* I'm not responsible for any damage may occur.
...................................................................................................................................................
Working / Not Working :-
-Everything is working (until now) except:-
1.FM Radio
2.HDMI - Hope it will be fixed soon
3.Wifi-Tether (after adding the language pack only).
...............................................................................................................
Kernels :-
* Use BelndMIUI-kernel (Best Battery) :-
For Arc : http://www.mediafire.com/?qg5ez6twxr12f1i
For Arc S: http://www.mediafire.com/?rrffkvrmgkbqrf4
* Or Use dooms kernel (Best Performance): http://forum.xda-developers.com/showthread.php?t=1342238&highlight=blendmiui+kernel
how to install Kernels and CWM :-
DooMLoRD said:
[ how to install ]
download the boot.img
save the boot.img in the folder with fastboot binaries (fastboot.exe files)
power down device
start device in fastboot mode
use the following command to flash the boot.img
Code:
fastboot flash boot boot.img
reboot phone and enjoy the kernel
FOR OVERCLOCKING
start SetCPU/NoFrills CPU Control app on ur phone (or any other app which supports overclocking) (u may get a popup asking for SuperUser permissions, click ok/yes/allow)
now slowly increase the MAX slider to the right (one notch at a time) to increase the maximum frequency limit
DO NOT JUMP TO THE LAST POSSIBLE FREQUENCY
SLOWLY increase the frequency one notch at a time and do stability/testing for few hours
Click to expand...
Click to collapse
..................................................................................................................
Download Link For 2.2.17 V2:http://www.mediafire.com/?5wpo3kz39tytm3u
Download Link For 2.2.17 V2.2 (NEW):http://www.mediafire.com/?wjo1ia6sdl8gn99
................................................................................................................
Some Cool Addons:-
MultiLanguage Pack For MIUI:2.2.17 :- http://www.mediafire.com/?2weujh7zdobwuph Arabic Language is not complete yet but else works fine
To install the language Pack :-(Modified)
1.Download the correct ROM and matching Language Pack from MIUI Android ROM download section
2.Copy to SDCard
3.Turn off your device, and then load into bootloader
4.Enter recovery mode
5.Wipe cache partition
6.Advanced > Wipe dalvik cache
7.Install zip from sdcard > Choose zip from sdcard > Select the zip file for ROM
8.Once the installation of ROM is done, reboot the device
9.Wait until the device boot into the newly flashed MIUI ROM (Yes, it will be in Chinese Language)
10.Turn off your device again, then load into bootloader
11.Enter recovery mode
12.Wipe cache partition
13.Advanced > Wipe dalvik cache
14.Install zip from sdcard > Choose zip from sdcard > Select the zip file for Language Pack
15.Once the installation of the language pack is done, reboot the device again
16.The update should be done by now. Enjoy your updated ROM!
source : http://techietalkz.com/2011/08/17/how-to-properly-update-miui-rom-with-language-pack/
.............................................................................
if you installed the previous multilanguage just use this fix for theme manager ..... how to apply :-
1- in CWM go to advance >>>> mount system
2- install the attached .zip
And it should work : http://www.mediafire.com/?om3u743ebz8k6uh
....................................................................................................
Bassboost : http://forum.xda-developers.com/showthread.php?t=1319523&highlight=bass
...................................................................................................
MIUI Extended Settings:-
* Flash this first :http://android.gcfam.net/devs/andy/Extended_settings/2.2.10/Signed_NoOverscroll.v2.zip DO NOT USE OVERSCROLL VERSION
* Install this Apk: http://android.gcfam.net/devs/andy/Extended_settings/2.2.10/MIUIsettings.apk
...............................................................................................
DSP manager:-
http://www.mediafire.com/?m1l462y9it8act9
...............................................................................................
How To Install the rom:-
1- Move the .zip file to SDcard
2- Full wipe System and Cache.
3- Wipe Dalvik Cache.
4- Install zip from SDcard.
5- Now Your done ... Enjoy
..................................................................................................................
V2 Changelog:-
* Updated to MIUI 2.2.17
* Changed Lock Screen (simplicity white )
* Added MIUI Extended Settings (doesn't work sorry , will delete or update soon).
* Added Volume botton skip track (Long Press on volume botton)
* Added TripNraver Init.d Tweaks from his x10 software (105.235.U.B71) (I Always wanted to use Trips tweaks i really hope he doesn't mind) .
* Put Supercharger Files ... you just need to active from here :http://forum.xda-developers.com/showthread.php?t=1334834
* Will post more when i remember
V2.2 Changelog:-
*Removed unworking Apps and junk Apps.
*Disabled the bootanimation for faster boot.
*Build.prop Tweaks.
*Faster & Smoother with better video streaming.
*Faster Touch Screen response.
*Fixed Multilanguage Usb mount problem.
...............................................................................................................
Credits:-
1- FXP Team for the source code of CM7
2- Jasonstein for his awesome script and kernel that without him i wouldn't start porting now.
3- Andy for Volume skip and extended settings . (many thanks too dinesh690 for pointing to this awesome addons.
4-zeppelinrox for Supercharger and MalarKeY007 for the tutorial.
5-roenano For RTL fix script.
6-h_zee13 for the lock screen and many thanks to blackIce theme Designer
7-TripNraver for int.d file
8-Saosin for the multilanguage .zip that i modified.
...............................................................................................................
Tips to fix fast battery draining :-
1-Calibrate your battery : http://www.miui-au.com/howtos/reset-battery-indicator/
2-Format SDcard: http://forums.androidcentral.com/sp...28273-format-sd-card-better-battery-life.html
...................................................................................................................................................
*If you liked it please press Thanks for my first port .I will appreciate that
How is the battery life?
Sent from my LT18i using xda premium
maliceomalice said:
How is the battery life?
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
Depends on the kernel you used .... I use BelndMIUI kernel and it lasts around a day and half with normal use .
What Android version is this? Does data and wi-fi work?
ArmorD said:
What Android version is this? Does data and wi-fi work?
Click to expand...
Click to collapse
WIFI -> Working
Data -> Working
Android gingerbread 2.3.7
why not baseband 64?
lastword112 said:
why not baseband 64?
Click to expand...
Click to collapse
Cause I'm using baseband 56 already .... it has a good strength .... but didn't try other basebands ....
hemo1001 said:
Cause I'm using baseband 56 already .... it has a good strength .... but didn't try other basebands ....
Click to expand...
Click to collapse
I think we really have to compare these two baseband... I cannot find a real comparison between them.. I will test myself and put the result..
andry1234 said:
I think we really have to compare these two baseband... I cannot find a real comparison between them.. I will test myself and put the result..
Click to expand...
Click to collapse
And I'll be so thankful ... i would really like to know too.
nice work bro
i've just installed SoftWhite MIUI few days ago so i can't try urs right now..
maybe next time
keep it updated
btw, does the torch app works in this version ?
Murtezah said:
nice work bro
i've just installed SoftWhite MIUI few days ago so i can't try urs right now..
maybe next time
keep it updated
btw, does the torch app works in this version ?
Click to expand...
Click to collapse
No problem i made this for fun only
torch does work even with the lock screen ... but it blinks a little ... i find this in all Arc MIUI versions and don't know why.
hemo1001 said:
No problem i made this for fun only
torch does work even with the lock screen ... but it blinks a little ... i find this in all Arc MIUI versions and don't know why.
Click to expand...
Click to collapse
yeah it always blinks .. but in ver 2.1.6 "i guess" it wasn't workin from lockscreen
will give a try soon
thanks again
im rooted and i have a recovery but my bootloader is locked can i install this rom?
spy16 said:
im rooted and i have a recovery but my bootloader is locked can i install this rom?
Click to expand...
Click to collapse
No u cant, coz it require special kernel,and without unlock BL,u cant change kernel
Sent from my LT18i using xda premium
is this possible porting orginal SE camera to this rom? miui camera is very lagy in low light..i love this rom its very nice but camera is important for me...tnx
a very good rom but is there any way yo make fm radio to work in this rom
MOHAMED FATOUH said:
a very good rom but is there any way yo make fm radio to work in this rom
Click to expand...
Click to collapse
Well i wish too .... i'm searching for a fix right now .and testing some repleacement apps like spirit fm.... but they didn't work ... i think it has something to do with the kernel but not sure..
.................
is it possible to put SE camera app instead of miui ?? i'll try ......
* Sorry i'm not an expert but i'm already improving my self ....next release will update with a better theme , removing junk apps and start adding some tweaks soon .
Uploading Version 2
good luck my brother is ver.2 uploaded yet
MOHAMED FATOUH said:
good luck my brother is ver.2 uploaded yet
Click to expand...
Click to collapse
Well i'm uploading again right now .... i had to delay it cause the script manager was without Ads .... means illegal

[GT-I9082 GRAND][ULTRALITE ROM][AROMA][2.07.2013][XXAMF7]Superfast and lagfree.

NEW I9082XXAMF7 ULTRALITE ROM V1.3a
LINKS -
1.ULTRALITE I9082XXAMF7.V1.3a
2.mirror 1
Code:
FEATURES -
for i9082XXAMF7 v1.3a
1.Default wallpaper is plain black.(IT IS NOT AN ERROR.I DID IT BECAUSE IT SAVES BATTERY)
2.Five new wallpapers added(Please leave feedback)
3.NEW Experimental kernel(kernel version 3.0.83) & updated stock kernel AMF7 (kernel version 3.0.31)
EXPERIMENTAL kernel is still in very early stages of development so please be patient.
4.No more DPI confusions.
5.Google play store , Supersu and root browser lite updated.
6.No more SMS to MMS conversion
7.lock screen and recent app shortcuts added to notification bar
8.I am working on separate installer for stock apps/keyboards/launchers/boot animations that is why they r not there in this rom.(will update the link soon)
9.some more...
KNOWN ISSUES:-
1.video player not working with experimental kernel.
kindly download new player from playstore like mobo,mx,vlc etc
2.battery indicator not working
flash http://d-h.st/k3S this through cwm to correct the issue
ULTRALITE ROM
I9082XXAMD6.V1.2b
​
NEW AROMA installer will wipe internal sd so please back up ur data.
i am not responsible for ur data loss.
​ THIS ROM IS FOR THOSE WHO WANTED TO HAVE BARE CLEAN ROM .
YOU CAN ADD AS MANY AS MODS U WANT...
LINKS
Single link download
https://docs.google.com/file/d/0B0-UdKvS-ISKRnZVN2xQSjZKTWM/edit?usp=sharing
(PREFERRED SERVER)
OR
http://www.androidfilehost.com/?fid=13858035414129967107
(doesn't need lockscreen addon already included)
OR
PART 1- http://d-h.st/5Nm
PART 2 - http://d-h.st/uA8
Download the above two parts. place them together. open up k2wl.i9082xxamd6.v1.2b.zip
EXTRACT IT TO ANY EMPTY FOLDER.
Then select all the files/folders extracted and make a single zip from it.
(due to size of rom i m unable to upload it to d-h.st as a single file)
USE WINZIP/WINRAR/7ZIP for this.(most of the time >>just select all files,>>right click >> select add to archive or add to blahblah.zip )
then just flash zip u made through cwm.
IF U NEED LOCKSCREEN SHORTCUTS TO 5 THEN SEE FOR LINK ON 15th ITEM OF CHANGLOG
BUGS OR ISSUES
1. Unsupported device in play store for lot of applications --- UPDATE UR PLAY STORE SERVICES
2. touch screen acts crazy while getting charged --- HAVEN'T FACE THIS ISSUE TILL DATE (PLZ SOMEBODY ELSE REPORT THIS ISSUE)
3 sim2 option for mobile network doesn't work --- WORKS FOR ME (PLZ SOMEBODY ELSE REPORT THIS ISSUE)
4.page buddy not working..---PAGE BODY NOTIFICATIONS ARE REMOVED
5.headphones symbol is missing when audio jack is connect with headset(wired)---PAGE BODY NOTIFICATION REMOVE ISSUE
6.user interface is getting hang'd while on power saving mode ---DON'T USE POWER SAVE MODE WHILE ON CUSTOM KERNEL
7. Sumtimes phone get's restarted..---NOT FACE THIS ISSUE
8. Page location Indicating dots at bottom of app menu and widget menu (IT IS MODED LAUNCHER TO SUITE 200DPI)
9. feather touch buttons(menu & back) back-lite wont glow... sum times it works(glows or lit's) ---WORKS FOR ME ALL THE TIME
10. 3G symbol is replaced with ( " H+ symbol" ) ----IT IS FROM SAMSUNG AND NOT ME
11. At or below 5% of battery...ohh god....phone is working like hell...taking a lot of time to open or display any option we touch... i was trying to make a call at 5% of battery and it was like hell ---TURN OFF UR POWER SAVE MODE AND TRY AGAIN
12.One sided dialer,calculater or force close stock broswer ---DUE TO 200 DPI ...CHANGE APP SETTINGS TO 480X854 AND 240DPI FOR EACH APP.
13. Service mode not working ---FLASH http://forum.xda-developers.com/attachment.php?attachmentid=1997720&d=1369732948 TO GET SERVICE MENU BACK.
​
CHANGELOG FOR ZTAMD1 V1.1a
http://d-h.st/Dnb
1.FIXED all NOTIFICATION,TASKBAR,HOME BUTTON ERRORS.
2.DPI Set to 200. (for dialer and calculator fix go to HERE!
those who need stock DPI flash this through cwm
3.Set DPI Per App included
4.Battery monitor in task manager/ram manager
5.Only 245-260mb ram usage on boot up
6.Xperia keyboard multi-lingual/nexus keyboard
7.OPTION TO SELECT FOLLOWING IN AROMA
ES file manager,root browser,allshare,accuweather,chrome,uc browser,dropbox,email vpn and exchange,polaris viewer,all stock widgets,wifi direct,smemo2,gtalk,live wallpapers.
8.Choose THEME for AROMA.
9.DISABLE BOOTANIMATION(Faster boot)
10.better deep sleep
11.more battery life
12.prelimenary BLN support(not working at present)
13.Deodexed
14.Zipaligned
15.Rooted
16.SuperSU (Thanks to Chainfire )
17.BusyBox
18.Init.d Support
19.Four Way Reboot Menu
20.Multiwindow for All Apps
21.Three Wipe options during installation.
22.No post install setup wizard.
23.Inbuilt AD blocking in Apps.
24.updated ADBLOCKING currently blocks 281564 types of ads and spywares.
25.GOOGLE PLAYSTORE 4.0.27
some others i dont remember. ​
OLD ROM CHANGE LOG
1.AWESOME AROMA installer ( Thanks to Amarullz)
2.Based on new I9082ZTAMD1 Firmware
3.Deodexed
4.Zipaligned
5.Rooted
6.SuperSU (Thanks to Chainfire )
7.BusyBox
8.Init.d Support
9.ext2sd Inbuilt support via addon. (no need for changing settings to make it work)
10.Four Way Reboot Menu
11.Multiwindow for All Apps
12.NEXUS 4.2 keyboard (stock keyboard removed)
13.Nova Launcher (TW launcher removed)
14.UC Browser
15.System DPI set to 200.
16.One Handed Operation (Thanks to Samsung)
17.Multiple app selection during installation.
18.Three Wipe options during installation.
19.No post install setup wizard.
20.Inbuilt AD blocking in Apps.
21.Custom Kernel.
22.Some inbuilt tweaks for battery improvement.
23. Custom Kernel features (build from source with added features) –
a. Compiled with google toolchain 4.7
b. Compiled with latest kernel building optimizations O3, Ofast.
c. Specific kernel flags Optimised specially for our beloved i9082
d. Fast usb charging support. Now you can get fast charging by connecting usb like AC adapter.
e. Customized CPU governers like hotplug, pegasusq (original Samsung governer for multicore support), interactivex, gallimaufry, ondemandx,sakuractive,lulzactive, smartassV2, adaptiveX,lagfree, etc in all around 15 governers to choose from for different needs.
f. I/O schedulers added SIO,fifo,row,V(R).
g. Disabled samsung MMC_CAP_ERASE -> no more hardbrick bug
PDA :-I9082ZTAMD1
For custom kernel only
http://forum.xda-developers.com/showthread.php?p=40422660
Things u must have
1.CWM by chotu or or pawitp or by me (new version with full touch and support for external and internal sd)
recovery 6.0.3.1 http://d-h.st/nw6 for recovery installation instructions see galaxygrandcenter.blogspot.com by chotu
2. my rom and some patience
Link for the rom
K2WL.I9082ZTAMD1 v1.1a
http://d-h.st/Dnb
OLD VERSIONS & addons
i9082 amd1
http://d-h.st/gXW
I9082.AMCD_INU.V0.9a
http://d-h.st/KUN
i9082.AMCD.V0.7d
http://d-h.st/MQj
i9082.AMC8.V0.3
http://d-h.st/u8y
DPI FIX addon for AMD1
http://d-h.st/seB
Addon for AMCD or AMC8 CWM flashable zip*
1. multiwindow all apps, note2 gallary, external 2 internal note2 video player
http://d-h.st/qh4
2.ringtones notification AMCD
http://d-h.st/Vkr
3.email, gmail and exchange support AMCD
http://d-h.st/ykn
4.dropbox AMCD
http://d-h.st/aAw
5. accuweather AMCD
http://d-h.st/q1S
6.Smemo2 AMCD
http://d-h.st/gGQ
smemo force close fix
http://d-h.st/n5H
7.External SD 2 Internal SD working on our grand.
just download the file below...flash through cwm and reboot..
your internal sd will be external and external will be internal sd. no need to partition.
http://d-h.st/AGR
8.AMCD live wallpapers
http://d-h.st/3Hh
9. AMCD Stock music players
http://d-h.st/R6O
10.AMCD stock battery
http://d-h.st/ExE
11.AMCD maps
http://d-h.st/Ya6
MODs from
1.balliboxer's thread (thanks to balliboxer for his work)
http://forum.xda-developers.com/show...02&postcount=2
2. collection of mods (thanks to adityaf)
http://forum.xda-developers.com/show....php?t=2204758
​
Procedure
1.boot in CWM recovery mode (Volume Up + Home + Power)
(make a nandroid back up before flashing anything)
2.wipe data/cache (factory reset) (dont do this if u have installing mods)
3.choose install zip from sdcard option
4.choose i9082.XXAMF7.V1.3a.zip
5.Chose options in AROMA & install the rom
6. reboot
what's removed
dropbox,samsung apps,(except ime, camera, calender), gmail, sns, vpn,enterprise exchange,email chrome...etc
Those who want to know whats removed see the attachment below.
if u want something back ...leave reply i will try to put flashable zip here.
what's working
wifi,network,bluetooth,...everything else.
whats not working...
???? u tell me...
NO SERVICE ISSUE
1. you may experience "no service " after rom installation here is what u do to get it back...
its a modem compatibility issue in between different firmwares
download the file from http://www.mediafire.com/?avjo48kvgz517z5 or http://d-h.st/7O8 NEW MODEM LINK
put ur mobile in download mode VOLUME DOWN + MENU + POWER then VOLUME UP to continue
connect to pc
(ur kies should not be runing... proper drivers should be installed)
start odin3 v3.04 . u should see the blue comxx as phone is connected
autoreboot and reset time should be selected.
click in PDA . select the modem.amc8.tar
click start...wait....u get pass confirmation..phone may boot into recovery just reboot.
JUST leave the feedback on this... it worked for me....so it may work for all of u.
UPDATE:- triangle away app just works one time on custom roms so when u reboot the phone the custom bin counter comes back to 1. you need stock rom with stock recovery to reset counter to 0.
credits
Amarullz for AWESOME aroma installer.
pawitp for cm10.1
Click to expand...
Click to collapse
chotu222 for making CWM for our device and inspiring me to make a custom rom
dsixda for awersome kitchen
chainfire for supersu.apk and triangle away app
samsung for awersome phone and stock rom updates
balliboxer and adityaf for their mods and work
BSDgeek_Jake for ad blocking hosts file
FOR Xposed Framework by rovo89 and the per app density app by Tungstwenty
...thank you everybody else whom i may forgot.
Click to expand...
Click to collapse
I AM NOT RESPONSIBLE FOR ANY BRICKS!!
K2WL...
can you provide default DPI flashable ZIP for ZTAMD1 ROM....?
CHANGELOG
Change log for I9082XXAMD6.V1.2b
1.DPI selection in AROMA Installer
2.Five different kernels to choose from.(EXP9 is my favourite)
3.Holoreboot added instead of four way boot menu(saves power button abuse)
4.More battery life than previous version
5.App settings and Xposed framework Updated
6.Root browser lite updated
7.No more play store issues due to DPI change.
8.Better deep sleep
9.Overclocking support (1.3ghz currently)
8.Underclocking support (156 mhz currently)
9.Less wifi related battery drain.
10.No more wifi issue with stock kernel.
11.Optimised Sqlite3.
12.More options for apps in aroma.
13.TW Launcher 6x5 in 200DPI.
14.Updated SuperSU to 1.30
15.lockscreen shortcuts 3 to 5 add on
http://d-h.st/wzU
some more i dont remember.
here is ur secgalary files
http://d-h.st/GHP
nice downloading now
i love the nature ux,pls provide a zip for it
Thanks K2WL...
ash5618 said:
i love the nature ux,pls provide a zip for it
Click to expand...
Click to collapse
whats nature ux??
SRISRIANDROID said:
Thanks KWL...
Click to expand...
Click to collapse
u better hit thanks than say it... just kidding... u r welcome
k2wl said:
whats nature ux??
Click to expand...
Click to collapse
samsung's stock launcher
ash5618 said:
samsung's stock launcher
Click to expand...
Click to collapse
u want deodex or odex apk of stock launcher???
k2wl said:
u want deodex or odex apk of stock launcher???
Click to expand...
Click to collapse
whichever works with ur rom
here is ur stock launcher
ash5618 said:
whichever works with ur rom
Click to expand...
Click to collapse
see the attached file to this post
k2wl said:
see the attached file to this post
Click to expand...
Click to collapse
charging my mobile right now,will let u 9 if it works
I want bln control, Email app from nexus, if possible nexus port... Thanks mate for tryin ..
i am not getting any signal mate
ash5618 said:
i am not getting any signal mate
Click to expand...
Click to collapse
what is ur previous version of firmware
k2wl said:
what is ur previous version of firmware
Click to expand...
Click to collapse
latest indian mc5 firmware
ash5618 said:
latest indian mc5 firmware
Click to expand...
Click to collapse
it's modem compatibility issue i think. i will post modem for this just wait. flash it through odin3 v3.04. ok
ash5618 said:
i am not getting any signal mate
Click to expand...
Click to collapse
see the first post i have updated it with link and procedure to follow.
k2wl said:
see the first post i have updated it with link and procedure to follow.
Click to expand...
Click to collapse
After flashing modem, Signal works.

[ROM][4.0.4]*Android Open Kang Project*[Final Edition vol.3][Update]

Screenshots here:http://www.mediafire.com/?gwh38tpffae53
Hi users.
This is continuations of DevSwift's AOKP (4.0.4) by me.
It was really great rom but needed some upgrade to be perfect.
I do it for us.
Thanks you all , thanks guys for everything and good bye!
Changelog (vol.3):
- no more random freezes
- some little changes
- added optional kernel in Extra Patches (DevSwift's 2.6.35.11)
Changelog (vol.2):
- rebuilding rom and upgrade to latest AOKP version (Milestone)
- no more reboots when watching long videos (+11min)
- fixed playback videos in browser (not flash!)
- fixed native wifi tethering
- newest Adreno drivers
- rom is fastest now (or placebo?)
- removed HTC IME and included keyboard IME from P500
- manual network searching and select now works perfect
- some build.prop tweaks (for battery life)
- little bit more free ram and better multitasking
Changelog:
- kernel 2.6.35.10 by Miroslav_MM ( for more free ram and better battery life)
- fixed LQ/HQ Hardware video decoders (MPEG4,H.263,H.264)
- fixed stereo audio
- fully support bluetooth headset (optional)
- fixed Power Menu double opening glitch
- Search to control play/pause/next music track (or video)
- manual networks searching fixed
- added FM Radio ( if u want listen , go to and set Settings > Audio > Method > msm7x30 sysfs
Settings > Audio > Output > Stereo Force )
- fixed recording in wave format
- mpeg4 encoder in Camcorder
- panorama mode working now
- many changed in system apps (some apps from stock ICS , like Launcher , Latin IME...for max performance)
- added HTC IME (best keyboard for our device?)
- all Themes (HDPI , XHDPI , MDPI etc.) working with Theme Chooser
- UI sounds from 4.2.2
- and others
Whats not working:
- ?
Fully working , stable and super fast 4.0.4 for GT540! You love it because i love it. Try it!
Forgot about SWAP , system have enought free ram for multitasking (Music Player with EQ + Root Explorer + Gallery + Browser + Calculator + Calendar in background without closing any apps....without swap)
Not included any tweaks , only AOKP Rom Controler tweaks and build.prop.
All most wanted apps included in system.
System partition - min.165MB
Installation:
- Go to Recovery ( CWM 5+ tested)
- backup your rom
- wipe data/factory reset
- mounts and storage > format system , sdext , boot
- choose zip from sdcard
- install my zip
- reboot system
- reboot once more and feel free
- done
Deepsleep not work when bluetooth/wifi is on , remember , if u dont used it , turn off to save battery!
'' Attention! If you do not see Windows MTP USB driver, remove from folder Windows/inf/ files wpdmtp.inf and wpdmtp.PNF''
Download for Recovery (vol.3):
http://www.mediafire.com/?rydqklacsgsy0uz
Download for Recovery (vol.2):
http://www.sendspace.pl/file/37e9e75fdc25773e8ef3c22/gt540-aokp-finaledition-vol2
or
http://www.4shared.com/zip/edeJ9c66/GT540_AOKP_FinalEdition_vol2.html
(Thanks 10MM for mirrors)
Extra Patches:
*DevSwift's kernel - if you want , try original rom kernel from here http://www.mediafire.com/?6ib6e8z1c4z7pvg .Im not tested it long time so , some features may didn't work. To go back Miroslav kernel , flash this http://www.mediafire.com/?nxik9gzvsj5ctb2 .
*BTDialingFix - (if you really need dialing with bluetooth, but you lost 6 volume speaker level (only this one , you still have six others) on dialing , so don't flash it if u not use this function!)
*12dalvikcache.txt - first rename it to only 12dalvikcache , move to system/etc/init.d and change right permission. Reboot. This script created dalvik-cache folder in cache partition and moved system apps dalvik-cache. Now you have more free space on data (for apps). And be careful when wiping dalvik in recovery.
*Memory_optimizer - download here: http://forum.xda-developers.com/showpost.php?p=41253571&postcount=55 please just flash it after installation system.
*DSPManager - for performance it was removed from rom , but if someone want....working with any players.
Rom have stock MusicFX from ICS , is very good but working only with stock music player.
*wpa_supplicant_adhoc & standard - are you using AdHoc wifi networks? Or you don't know why your phone doesn't see wifi?
Android have some bug , don't show AdHoc wifi networks.
If you need this , please install wpa_supplicant_adhoc.
Now your phone see all wifi signals , but lose blue signal rows on status bar.
When u save your AdHoc networks in wifi settings , now install wpa_supplicant_standard. Now blue rows on statusbar come back and you can connect to saved AdHoc.
*key_original - flash it if u want original keys functions.
Congratulations for great dev's:
- DevSwift
- Miroslav_MM
- LeoPosas
- and AOKP team for wonderful rom​
It was last rom from me...good bye!
Great job man, I am gonna test right now :good:
Going to test it today, if this is your last rom, then thank you and good bye, you did great job with all of your roms.
Maybe , maybe its not last , but i need break.
Then get a solid break then, I'm downloading right now.
Super smooth ICS ever made
Think we will need good mirror for this rom . If somebody can , please give it users , because dropbox is not so good...
Little fix for stability ( sometimes rom was unstable for me , it was my bad) and better audio codec for camcorder in first post.
Sorry about that , please install it.
Re: [ROM][4.0.4]*AOKP ICS*[Final Edition]
I will test now, what tool to resize the system partition?
thanks
Sent from my GT540 using xda-app application developer
ahmyani said:
I will test now, what tool to resize the system partition?
thanks
Sent from my GT540 using xda-app application developer
Click to expand...
Click to collapse
You need swift boot loader builder to resize partition
download:-
http://kulkoff.com/swift/downloads/SwiftBootloaderBuilder.zip
Source:-
http://androidforums.com/3738059-post75.html
I'm testing it since today and I have to say that this rom is the best 4.x ever made for our device. It's very smooth, fast and it seems to be stable. I was concerned about the ram usage of system processes but it's not that bad, actually there's 80-90 Mb of ram available for user ( after clearing the memory ) with Adw launcher and with lowered heapsize settings ( 64 Mb to avoid problems with some applications and games ). Games runs great as well, some even better than on SDSL v4. After long time of searching for suitable 4.x rom I found it ( I lost faith that there might be a fully working and fast android 4.x for this device ) and this is my daily rom now.
Re: [ROM][4.0.4]*AOKP ICS*[Final Edition]
razor17 said:
You need swift boot loader builder to resize partition
What is required to make a full wipe? before to resize system partition.
Sent from my GT540 using xda app developers app
Click to expand...
Click to collapse
ahmyani said:
razor17 said:
You need swift boot loader builder to resize partition
What is required to make a full wipe? before to resize system partition.
Sent from my GT540 using xda app developers app
Click to expand...
Click to collapse
For wipe I do in CWM- factory data reset, wipe cache, wipe dalvik cache
and in mount and storage-format-boot, format data, format sd-ext, format system
This is just for me, but if u wan't wipe full in different way then try this
How to Make a Super-Wipe Before Flash a New ROM By LeoPosas
Video Tutorial:-
http://forum.xda-developers.com/showthread.php?t=1855050
Click to expand...
Click to collapse
just two words...
is AWESOME!!!!
thank you very much for sharing this with all :victory:
the link is broken D:
can you (or somebody) upload it to google drive/mediafire please? thanks
Re: [ROM][4.0.4]*AOKP ICS*[Final Edition]
I can't download rom AOKP (final edition). I get the message :
"Error (509)
This account's public links are generating too much traffic and have been temporarily disabled "
what happened?
Sent from my GT540 using xda app-developers app
Mirror for PolishVodka request: http://www6.zippyshare.com/v/6700339/file.html
Dzięki shadovraven za mirror , wkleje do tematu.
Is this rom better/faster than AOKP Milestone#6 r2 by rishabh.raj37? It's my daily rom now, and I'm thinking if this rom is worth reflashing my GT540.
sinedoOo said:
Is this rom better/faster than AOKP Milestone#6 r2 by rishabh.raj37? It's my daily rom now, and I'm thinking if this rom is worth reflashing my GT540.
Click to expand...
Click to collapse
It's more faster and have more free ram!

[ROM] [**PULLED**] [JB 4.1.2] [P6800 GSM/3G] 12May13 | SkyHigh [DXMD3] v1.0.1

[ROM] [JB 4.1.2] [P6800 GSM/3G] 12May13 | SkyHigh [DXMD3] v1.0.1
*** I have pulled the ROM indefinately pending P6810 JB release - Post #30 ***
P6800 GSM/3G VERSION ONLY
* I am the creator of SkyHigh ROM for P6810 model and have decided to spare some of my valuable time to further help out our P6800 brothers and sisters. I DO NOT USE THIS DEVICE, and rely on YOU to give constructive feedback (good or bad) and let me know how you went.
* It took A LOT a lot of reading, research and trial & (many) errors to get to this stage, so I hope you like this official release and please rate the thread and my efforts accordingly. I take no claim to any mods in this build, and borrow ideas and tweaks from other sources. I just piece them together to make it work.
* This is a FIRST JB RELEASE, and I will endeavour to release future updates ...... NO ETA's
* You may modify this ROM for personal use, but I will not answer posts or PM’s regarding any related issues to this other than those options in Aroma Installer . I just don't have the time to debug your own mods or others such as PimpMyROM without device, and in any case, they should be posted in the appropriate thread.
'Nuts & Bolts’ :
✔ Android JB 4.1.2
✔ Stock themed - Highly tweaked firmware: P6800 [DXMD3]
✔ Stock kernel
✔ Aroma Installer : Many apps, mods, tweaks etc optional
✔ Fully Deodexed
✔ Root
✔ Zipaligned
✔ SuperSU v1.25 or Superuser (V6SuperCharger)
✔ Busybox
✔ Bash shell support
✔ Init.d script support without the need for a custom kernel
✔ data/app functionality
✔ Wipe options :
+ Wipe - No data - Auto wipe : system, cache, dalvik-cache & preload
+ Full Wipe - optional, but a requirement - your int/ext sdcard is NOT wiped​✔ After install - Aroma option to reboot recovery directly -OR- reboot system
✔ Init.d Performance Tweaks :
+ Entropy lag “fix”
+ Disable logger
+ Sqlite optimizer
+ sdcard R/W tweak
+ EXT4 tweaks (greatly increase I/O)
+ RAM optimisations
+ Zipaligned on boot​✔ Set IO scheduler - Choice of :
NOOP
deadline
CFQ
✔ Build.prop Tweaks :
+ Frees up more ram when needed
+ Increase wifi scan to 3 mins
+ Faster scrolling
+ Save power when in sleep mode
+ 3G TurboCharger Enhancement!
+ Increase overall touch responsiveness
+ Use dalvik JIT compiler
+ Deeper sleep when on standby
+ Better photo & video quality
+ Raise JPG quality to 100%
+ Enable USB debugging by default
+ Render UI with GPU
+ Disable waking up with volume rocker
+ Disable black screen issue after call
+ Faster ring when dialling out
+ Increase the volume steps in-call (7 to 20)
+ Disable bootanimation
+ Disable logcat
+ Disable kernel error checking
+ Disable extended dalvik jni checking
+ Disable sending usage data
+ Disable Google report service​✔ CrossBreeder
✔ Sony Mobile Bravia Engine 2 (placebo or not)
✔ Ad-blocking hosts
✔ Universal AGPS patch - for faster GPS lock
✔ No annoying boot up sound
✔ Apps included :
+ Modded Maps with street view and FREE Nav for unsupported country
+ Titanium Backup
+ Asus Day Scene live wallpaper (Aroma > select "wallpapers")
+ Flash Player for supported browsers
+ Script Manager
+ YouTube Downloader
+ Swype from 4.0.4 - don't know if working, you'll have to tell me​
* Bear in mind I’m just a Chef, not a Recognised Dev, so any constructive criticism and help welcome. This project is (like many) is just a kang of various Devs work and ideas, so all credit to them. BIG THANKS
To Do List : if I’m capable of implementing, have the inclination and time.........
* LOTS
Installation instructions, Credits, Changelog, & Download & in Post #2
Please read FAQ & Help in Post #3
.
.
Installation, Credits, Changelog & Download
How to Install :
Disclaimer: Flash this ROM and its mods/tweaks at your own risk. However unlikely, YOU are solely responsible for any potential damage to your device or data. Do not flash unless you know what you are doing, are capable of reading, following instructions and using ADB or Odin to help recovery of a soft brick.
1. Require a custom recovery such as CWM or TWRP (suggest TWRP to prevent/reduce Aroma freezing during install - refer post #3)
2. Backup User apps and data with Titanium Backup Pro app or other method and save off-device
3. Save ROM to EXTERNAL sdcard (not sure if will flash from internal sdcard yet)
4. Boot into custom Recovery
5. NANDROID BACKUP & KEEP COPY ON PC !!
6. Flash v1.0.1 (select wipe data option) and reboot
7. Be patient, first boot will take a while !
8. Initial setup & check install “unknown apps” in phone settings
9. Restore User apps and data from Titanium, Wi-Fi settings etc (GREEN & YELLOW normally OK)
10. DO NOT restore any SYSTEM apps or data in RED colour with Titanium Backup
12. Reboot, setup accounts (if not restored in Step #9/10) & allow the ROM to “bed in”
* If you experience any issues with the ROM, flash ROM again with WIPE DATA option and check BEFORE doing anything else
* I don’t have the time to help posts in this thread unrelated to the ROM and if you have not followed any of the above instructions!
Credits & Thanks : PM me if I’ve missed anyone out or need to add anything, apologies
* If you “thank” me, please drop by on the below links and also “thank” those that have also contributed
XDA, all the Dev’s, Modders, Themers & Users !!
Dsixia : Android Kitchen
Samsung & Google : base firmware
DooMLoRD : generic init.d support without kernel
Darky / slaid480 : zipalign on boot
imbawind : sdcard R/W tweak
pikachu01 : Thunderbolt sqlite optimizer
Zeppelinrox : V6SuperCharger & Tweaks
Crypted : AGPS patch
Raziel23x : APK Multi-Tool
Dev-Host : For the Premium account to host these builds
amarullz : Aroma Installer (and Omega ROM - adapted some ideas from their installer script for this build)
Jouixs : Asus Day Scene live wallpaper
Till-Kruspe : Sony Mobile Bravia Engine 2
dr.ketan : Google Map Free voice Navigation in non supported country
fred be_9300 : Force Close "Partial" Fix
OsamaGhareeb : [Mod] YouTube 4.4.11 - Downloader, All Qualities Playable ,Screen Off Playback (v4)
BSDGeek_Jake : Mother of all ad blocking Extreme Hosts File
idcrisis : CrossBreeder 3.15.13v2
All Users giving constructive feedback - thanks
Changelog :
v1.0 Initial Release (12/05/2013)
Don't forget the THANKS button, it's free, same as the ROM and my time
** ↓↓ v1.0.1 Download Below ↓↓** : P6800 GSM/3G VERSION ONLY
*** I have pulled the ROM indefinately pending P6810 JB release ***
.
FAQ & HELP
FAQ & Help :
Languages :
v1.0.1 DXMD3
* As released by Samsung for SE Asia http://forum.xda-developers.com/showpost.php?p=41319345&postcount=458
* Will more language support be added? NO, I am not a translator, and only if the newer base released by Samsung natively supports it !
Titanium Backup problems? :
* Try an older version : http://matrixrewriter.com/android/
Aroma Installer Freeze :
* Use TWRP Recovery instead of CWM
* Or, if need be, use volume rocker to navigate & power button to select options
* Instructions are here: [RECOVERY] TWRP 2.4.4.0 touch recovery [2013-03-12]
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
Click to expand...
Click to collapse
ROM Bugs - Not firmware bugs !! :
* Wait and see.........
Will flashing this ROM wipe my data? :
* NO it won't wipe your data, but data wipe is a requirement in Aroma to ensure a bug free device. Just backup data and nandroid first.
* Installer will auto wipe : system, cache, dalvik-cache & preload
* If updating from a different ROM or android build/version, it is a requirement that you follow the installation instructions fully in Post #2 and read the notes below it!
* If after flash & boot you have some unused "green android shortcuts" on your home screens, just delete them. This means that you didn't do the requested data wipe did you:? Give yourself a slap !
Entropy Lag "Fix" :
* I created the script sourced from info here
* No need for using Seeder app and less overhead
* To check it's working :
Run android terminal emulator app
su
entro
You should see a figure around 3600 (possibly more), meaning it's working
Video & HDMI out :
* HDMI out to external display works as released by Samsung
* Natively, not all video codecs are compatible through stock video player. You may need to install a codec supported video player app from Google Play. Try without the ARMv7 add-on first
Battery Life & Performance :
* Give the ROM time to build its caches and “bed in” etc.
* Battery % reporting may need to be re-calibrated
1. Use your device to NEAR zero % (ie. 2%)
2. Fully recharge uninterrupted
3. Unplug when 100%
* Actual drain really depends on your own configuration, and has nothing to do with this ROM.
Some Tips :
* Lower screen brightness and time-out
* Check apps running in background, unneeded auto-starting apps, auto-sync, GPS, wifi, rogue apps etc
BetterBatteryStats is a good app for checking wakelocks.
* Remove or freeze unwanted System apps (bloatware), disable animations (you will lose CRT off animation until re-enabled), motion etc
Mods & Apps :
* I have not seen or measured any negative impact to ROM performance or stability on my P6810 model (or reported by P6800 User during test phase), so any potential improvement (no matter how slight), is still an improvement.
* Any in-depth discussion is to be addressed in the respected threads, links are in found in the Credits & OP
AGPS :
1. Open internet connection
2. Use "GPS Status" app (menu/tools/manage agps state/download) and then wait for first fix.
3. ++ After that, subsequent fixes should be much faster ++
4. Try and see how location locks in Maps
.
.
reserved and again
Thanks to release。I'm wiating to flash。
i've been using ur ROM for long long time and it works very reliably. i am waiting for your new release for so so long time and finally it'shere now!!!
your are the true savior of the P6800. Making this device long lives!!!
Thanks a ton and I cannot waiting try this!!!!
Sent from my GT-P6800 using xda premium
rickylcp said:
i've been using ur ROM for long long time and it works very reliably. i am waiting for your new release for so so long time and finally it'shere now!!!
your are the true savior of the P6800. Making this device long lives!!!
Thanks a ton and I cannot waiting try this!!!!
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
Thanks for your kind words. I'm really just an experienced user who turned his hand to cooking. There are real Devs such as daniel doing an excellent job also.
I'm just hoping it installs >> boots >> everything installs/works as it should. I played around with the aroma config and updater-scripts, so high risk for error. Also, a lot of optional apps are symlinked to the preload partition. From there, the plan is to move on to further mods. Most will most likely be a flashable patch (until working), and then integrate into the next release.
Step-by-step.
Sent from my GT-I9500 using xda premium
Hi,I try to flash this rom.It seems have a scrpit error. Aroma is not work. The error message is bellow:
SYNTAX ERROR!aroma-config on line 386 col 3
E:Error in /emmc/shight ROM JB P6800DXMD3 V1.0.zip
(Status 1)
Installation aborted.
tzm0510 said:
Hi,I try to flash this rom.It seems have a scrpit error. Aroma is not work. The error message is bellow:
SYNTAX ERROR!aroma-config on line 386 col 3
E:Error in /emmc/shight ROM JB P6800DXMD3 V1.0.zip
(Status 1)
Installation aborted.
Click to expand...
Click to collapse
Because it was most likely incomplete and not yet available for release. I will double check though when I get home before posting link.
Edit: Seems I found a rather large mistake. Not copying the modified updater-script to the installer
OK, here we go, reupload once again........... It will be ready in another few hours
Edit2: Sorry, can't thank your post. I've run out for today !
Sorry, you are limited to 8 thanks per day
Click to expand...
Click to collapse
.
Sent from my GT-I9500 using xda premium
Now JB has arrived
I was waiting for this... ever since the official JB came out
Thanks, your work is appreciated!
UpInTheAir said:
Because it was most likely incomplete and not yet available for release. I will double check though when I get home before posting link.
Edit: Seems I found a rather large mistake. Not copying the modified updater-script to the installer
OK, here we go, reupload once again........... It will be ready in another few hours
Edit2: Sorry, can't thank your post. I've run out for today !
.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
No problem, I thank him on behalf you... Still got spare 'thanks' today
Sent from my AOKP N4
v1.0 IS UP
v1.0 is now up !!
Do highly recommend to select FULL WIPE option in Aroma as ROM is fully de-odexed.
Make sure you have a recent NANDROID BACKUP and follow the Installation Instructions in Post #2.
Let's hope it works :fingers-crossed:
Download link in Post #2. No mirrors thanks.
Cheers,
UITA
.
UpInTheAir said:
v1.0 is now up !!
Do highly recommend to select FULL WIPE option in Aroma as ROM is fully de-odexed.
Make sure you have a recent nandroid backup and follow the Installation Instructions in Post #2.
Let's hope it works :fingers-crossed:
Download link in Post #2. No mirors thanks.
Cheers,
UITA
.
Click to expand...
Click to collapse
Thx for good works. Downloading and will report the results
[Update] Boot okay after a full-wipe flash. BTW I was already in JB 4.1.2 before flashing your ROM
UpInTheAir said:
v1.0 is now up !!
Do highly recommend to select FULL WIPE option in Aroma as ROM is fully de-odexed.
Make sure you have a recent NANDROID BACKUP and follow the Installation Instructions in Post #2.
Let's hope it works :fingers-crossed:
Download link in Post #2. No mirrors thanks.
Cheers,
UITA
.
Click to expand...
Click to collapse
Hi,UpINTheAir,I just flash this rom.It seems still have bug. I can finish this rom with aroma .But when p6800 restart,It just stay in first logo, no musuc (I select the music).can't go into sytem. I flash two times,another one just flash two times too,the result is same.
tzm0510 said:
Hi,UpINTheAir,I just flash this rom.It seems still have bug. I can finish this rom with aroma .But when p6800 restart,It just stay in first logo, no musuc (I select the music).can't go into sytem. I flash two times,another one just flash two times too,the result is same.
Click to expand...
Click to collapse
Please be patient. First boot can take a while.
Sent from my GT-I9500 using xda premium
UpInTheAir said:
Please be patient. First boot can take a while.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
I have enough patient to wait long to 20 minute‘s. It just stay in first logo。Now I flash back to stock DXMD3。
Anyone else with ROM not booting?
Do I need to pull the download link?
Sent from my GT-I9500 using xda premium
v1.0 PULLED - v1.0.1 UPLOADING
Ok. Pulling the link. updater-script error !
Kernel not installed.....
Sorry.
Will fix now and re-upload. Post v1.0.1 tomorrow.
Sent from my GT-I9500 using xda premium
UpInTheAir said:
Ok. Pulling the link. updater-script error !
Kernel not installed.....
Sorry.
Will fix now and re-upload. Post v1.0.1 tomorrow.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Well, same here but you might found already the bug.
UpInTheAir said:
Anyone else with ROM not booting?
Do I need to pull the download link?
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
My friend in QQ 6800 group flash this rom too。The result is just same。We used your ROM since first SKYHIGH。

[ROM][7.0][610x][2/5/18] OctexOS by Hilmiiz

Disclamer
Code:
# This ROM is made for (SM-G610x) tested on G610F
# Flash it at your own Risk!
# Your warranty is VOID Knox flags 0x1
# I'm not responsible for damage to equipment or loss of warranty!
!!FOLLOW THE INSTRUCTION HOW TO FLASH!!
Stability - Battery Life - Performance
- Based on G935FXXU3BQHA
- Android security patch level 2017-12-01
- PDA - G935FXXU3BQHA
- CSC - G935FXXU3BQHA
- Support for models G610F/Y/M
-All app and features from S8
-Add Default Ambient Display
-Face Recognise
-Grx Touchwiz
-FM Radio
-Dual Speaker Mode
-Dual App
-S8 Camera
-S9 Wallpaper
-Autostart App in Settings
-Bike Mode
-init.d support
-Lock LTE Only
-Modded for gaming experiance without battery draining
- Deodexed
- Zipaligned
- Added Build.prop Tweaks
- Added CSC Tweaks
- Multiple languages
-MULTIUSER
- Optimized Battery
-Stability and optimization
-Edge Lightning
-Edge panel S8
-SELinux permissive
-Multiwindow
- Dream UX
-Live message
-Sub symbol keyboard all languages
-Add 100++ font setting>display>screen zoom&display
-Advance power menu
-VoLTE support
-Samsung Clouds
-Fast Charge
-New 4g icon
-Floating recent app
-Floating Notification
-Smooth
-And many more
*Support Oxygen kernal
HOW TO INSTALL
1. Install Recovery 3.2.1-0
3. Download the ROM and copy it to your sd card.
4.Mount system , data and cache
5. wipe dalvik-cache , cache , data and system
6. After that flash the ROM
7.Follow Aroma Installer
8. Wait 3 to 8 minutes (First start of installation take a long boot)
9. Finish the setup (You will see the picture will blur and bootlogo will be small than screen)
10.To fix this open settings>display>screen resolution change to WQHD then change back to FHD then restart .
*note: if you not change back to FHD , you can't take screenshot and record screen .
How to use xposed :
1.download xposed installer https://drive.google.com/file/d/1OoVp7SSzdeGxew7_WRaDESk9S-jzVYhJ/view?usp=drivesdk and xposed framework https://drive.google.com/file/d/1bmfp6pqVX8TIc_OYgQHVEu0opzG6kpy5/view?usp=drivesdk
2.install xposed installer.apk
3.Reboot to recovery and flash xposed framework.zip
4.Reboot and enjoy
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2018-05-1
Link v2 : https://forum.xda-developers.com/ga...870/rom-octexos-gold-edition-hilmiiz-t3790361
# If you like this rom , hit thanks button and also can donate to me . I need upgrade my computer to make other rom more better . My computer so laggy and hang #
Donation : https://paypal.me/hilmiiz
OctexOSv1.1=https://drive.google.com/file/d/195B8aAKDWwvV0g21ExKKdKtVauMqOl80/view?usp=drivesdk
#Dont update samsung san if you want more font in setting#
Credit :
Thanks to @samsung for firmware
Thanks to @amarullz for Aroma Installer
Thanks to @God For giving me time to make this rom
Thanks to @Chainfire for superSU
Screenshot :
Good Job Bro
gencemre2795 said:
Good Job Bro
Click to expand...
Click to collapse
Thanks :good:
Sorry for my mistake . I dont notice the fingerprint bugs before compress the rom . But i have made the fix for fingerprint and other . Now the rom fully stable . If you found bugs . Please tell me
IS Secure Folder work ???
mr.smsom said:
IS Secure Folder work ???
Click to expand...
Click to collapse
Secure folder never work on rooted device
Hilmiiz said:
Secure folder never work on rooted device
Click to expand...
Click to collapse
why i have galaxy s7 and s6 rooted but i have Secure folder
mr.smsom said:
why i have galaxy s7 and s6 rooted but i have Secure folder
Click to expand...
Click to collapse
If you have s7 and s6 why you come in j7 thread ?
Hilmiiz said:
If you have s7 and s6 why you come in j7 thread ?
Click to expand...
Click to collapse
Bcoz i love your rom ^_^
mr.smsom said:
Bcoz i love your rom ^_^
Click to expand...
Click to collapse
This rom only for j7 prime
how to use xposed in this rom?
Hyukuza said:
how to use xposed in this rom?
Click to expand...
Click to collapse
Link uploaded . Find in first post
Thhanks for this wonderful rom..so far the bug ive found is evrytime o will reboot the phone i need to enter na wifi password again,im using v1.1.thanks
androzen said:
Thhanks for this wonderful rom..so far the bug ive found is evrytime o will reboot the phone i need to enter na wifi password again,im using v1.1.thanks
Click to expand...
Click to collapse
I will try to fix it . Thanks for your feedback
do i have to apply those fixes if i install the rom of this link ?
OctexOSv1.1=https://drive.google.com/file/d/195B...w?usp=drivesdk
*OctexOSv1.1 is fully stable and no need any fix
Click to expand...
Click to collapse
610F boot-loop, phone keeps restarting...
AmirRouichi said:
do i have to apply those fixes if i install the rom of this link ?
Click to expand...
Click to collapse
Only v1 need the fix
AmirRouichi said:
610F boot-loop, phone keeps restarting...
Click to expand...
Click to collapse
Dload v1.1 and do full wipe before flash the rom
Hilmiiz said:
Dload v1.1 and do full wipe before flash the rom
Click to expand...
Click to collapse
i downloaded v1.1 from the link (https://drive.google.com/file/d/195B8aAKDWwvV0g21ExKKdKtVauMqOl80/view)
did a full wipe including the internel storage, then i copied the files to phone and i wait 10 min of bootloop.. :/

Categories

Resources