Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Talha10 said:
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Click to expand...
Click to collapse
Are you do a full wipe, before flashing another custom rom?
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Talha10 said:
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Click to expand...
Click to collapse
I suggest you install the stock rom using odin. It seems you have some corrupted files. Before flashing the stock rom, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Once you have flashed the stock rom, go to recovery mod and do Wipe Data/ Factory Reset and Wipe Cache Partition (otherwise bootloop might occur). After that install root and CWM from the recovery mod. Now you can install any other custom rom without any problem. Do post your results. Hope I Helped
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
---------- Post added at 06:03 AM ---------- Previous post was at 06:00 AM ----------
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
And, try redownload, and flash that rom again. Maybe, it's corrupted.
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Talha10 said:
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Click to expand...
Click to collapse
Try installing CWM 5 from the recovery mod. CWM 5 is much more stable than CWM 4. Once you have installed CWM 5, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Then try to flash any working rom with it. Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your result. Hope I Helped
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Talha10 said:
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Click to expand...
Click to collapse
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
mahithm said:
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
Click to expand...
Click to collapse
Yes im sure i do all of them always
Related
Hi all,
So after I flash a new ROM (MIUI MGv2/RC8vC/MGv1) I always hang at the Galaxy S GT-I9000 screen - the first boot screen.
I am wondering what this means? is it a corrupt file, something wrong with my internal sdcard, ROM not installed properly?
Please help,
Thanks.
some times a wipe from recovery will help and goes back to normal boot
many issues may cause this problem for instance if framework.jar or android.policy.jar or... have some bugs , will happen like that
Hi,
By wipe you mean clearing the formatting system, data, cache, dalvik cache and a factory reset? I ask this because the MIUI roms are not are non-wipe and the instructions recommend you to format those places before install (which I did).
I mean wipe cache partition from recovery. just try it and ley us know if it works
Well I just tried again but it doesn't work because I can't access recovery mode. It hangs at the Galaxy S screen and doesn't move from there so I'm wondering why because if I can't fix the bad install then I can't access the recovery mode and can only flash.
if recovery dont work BUT download mode does,
start the whole process again, flash back to stock froyo with froyo bootloader.
did you come to MIUI from Gingerbread ??
Well i've done the process like 10 times, nearly every single time from froyo (JPU,JS5,Ezbase 2.0) and I also went from 2.1 to 2.2 and then to MIUI. The other times I have tried coming from CM7 as CM7 works.
well i have a similar issue but in my case i just wiped my data thru cwm on darky v8 xxjpy..
now i get boot loops,any idea what should i do??
i know this is not exactly the thread but if i get my answer it'll save me from starting a new one..
When I got bootloops i normally reflashed. If you don't have data it will probably work?
I assume you have data as your on Dark v8 when V9 is out?
i dont understand by have data??
i flashed v9.5 but went back to v 8 few months ago..
today i just wiped/factory reset my phone using cwm and it was succesful but now its bootloops and vibrations..
i never wiped my phone before and only have flashed using cwm,never used odin for flashing roms!!
OH I see, by data i meant personal data that you might want to back up...I'm not to most knowledgeable but I know how to flash roms. I reckon you should try to flash V8 it again if you can enter recovery.
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
Hi guys. Tried to root my Note but got stuck at samsung logo. so I went back to download mode and flashed back to N7000DXLP9 and tried a few other different stock roms as well. But I keep getting stuck at Samsung logo. Please help guys.
Simply go to recovery mode. Wipe catch / factory reset - reboot
chintamanijaipuri said:
Simply go to recovery mode. Wipe catch / factory reset - reboot
Click to expand...
Click to collapse
tried that many times but still stuck at samsung logo
any other suggestions?
Have Same Problem Brother
mee too got same problem any help would be appreciated..!
How long did you wait. I found that after installing a new rom or factory wipe that it would take up to 5 minutes to boot. It would just sit at the samsung logo with a pulsing glow for ages.
Maybe you just need to give it more time?
What tools and packages did you use?
zolakt said:
tried that many times but still stuck at samsung logo
Click to expand...
Click to collapse
Wipe cache, do a factory reset, wipe dalvik cache. If still stuck, it looks like a bad flash/kernel problem. Try flashing it again.
Finally succeed
It's work for me, I simply entered my galaxy S3 into recovery, make factory reset, wipe chache and then reboot and my S3 finally boot normally. Thank You all.
Make my thorough wipe as below when flashing a new ROM:
1) Wipe data
2) Wipe cache
3) Wipe dalvik cache
4) Format /system & /preload
5) Format internal sdcard (make sure you save anything you need before)
6) Flash ROM
7) Wipe cache again
8) Wipe dalvik cache again
9) Reboot
This way you ensure you flash your new ROM in a completely clean environment. Then when booting the new ROM, wait some time before saying it's stuck at the boot logo. As people already said, sometimes it takes a long time to display the setup screen (but should be less than 8 minutes in any case). I'm assuming you have CWM to do this; if you don't, try the equivalent in the stock recovery (but it doesn't have all these options), poweroff, boot in download mode, then flash using Odin.
ATTENTION: make sure you make the wipes using a brick-free kernel! Search the forums if you don't know what it is. If you don't, you may brick your phone. You should flash a brick-free kernel before anything, without any wipes (it can be done through Odin if you download a safe kernel in this format); then you are ready to go with the wipes and flashing a new ROM.
my j500h keeps on restarting just after displaying samsung logo. i have tried nearly everything but seem to be stuck on the same bootloop. any idea am so stressed up.
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Do you ever wipe the system partition?
upconvert said:
Do you ever wipe the system partition?
Click to expand...
Click to collapse
Agree. In TWRP, a factory reset only wipe data, cache and dalvik cache. You have to manually format system. A clean install requires to wipe system, data, cache and dalvik-cache.
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Try flashing the original firmware via odin.
iZLeeP said:
Try flashing the original firmware via odin.
Click to expand...
Click to collapse
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
danizmax said:
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
Click to expand...
Click to collapse
Of course. Flashing original firmware via odin brings back the original setup that came with the tab out of the box. I just don't remember if it will delete the contents of internal sd card. In any case, you can flash original firmware thru CWM as I always do, though I only flash boot and system images I modified in Kitchen. It will still be stock but only that it has been debloated, rooted, busybox installed, init.d enabled, and some system apps replaced.
Just remember that when flashing ROMs via CWM do a factory reset (wipe data, cache, dalvik-cache). In addition to the wipe, the rom.zip itself formats the system partition prior to flashing.
Hi guys.. I need help on my Samsung Galaxy S3 Mini i8190.. I (think) did everything but nada..
Problem
My phone is always restarting, it gets in to the phone for a few seconds but then always restart.
It is rooted, with CWM Recovery touch 6.2.0.7.
What i have done
CWM Recovery
- Factory Reset
- Wipe Dalvik Cache
- Wipe Data
- Wipe Cache
*everytime i got into recovery mode, i noticed that the system is unmounted, is that normal?
In the recovery mode, it said that it was success but when i reboot system, still get the same latest phone condition with no change at all. It means the factory reset, and all the wiping did not work.
Odin
- Flash with stock ROM
- Install latest CWM recovery
- Install stock recovery
- Install Cyanogen
In the ODIN, it said that it was a success, still i get the same latest phone condition with no change at all. It means that all the process was not working.
I concluded that this might happens because the internal storage was very full, it has only 16 MB left (according to CWM when i try to backup on internal storage). And i think the only way is to factory reset, but as i mentioned before, i tried using CWM to factory reset but still go back to the latest phone condition.
I am looking forward for your help guys..
i have the same problem and tried also all the ways you mentioned.
this problem drives me crazy. please help guys
Have you tried using twrp instead, just a thought, & maybe clear out internal storage with file manager
Sent from my GT-I8190 using XDA Free mobile app