I tried everything to get it working... I installed manually TX adb driver "sa0105adb.inf", flash tool, pc companion, sony service update, but nothing seems to be working. When I execute adb devices I get empty list. What should I do ??
Edit: I have finally done it. I installed some google testing 3.something adb driver
Related
I've searched and searched for a solution to this, nothing is working. Really need help guys.
Phone is on stock ICS rom, PC is Win8 Pro x64. All three files are in the folder, SDK is installed (x64 version), Google USB driver installed, Java for windows installed, and HTC Sync installed but not running.
When in FASTBOOT and USB connected it shows FASTBOOT USB. Device manager shows Android Phone - Android ADB Interface. Is this correct or should it show something else in device manager?
No matter what I've tried when running fastboot oem get_identifier_token in command prompt I get waiting for device. Also running fastboot devices returns nothing.
Don't know what else to try... Seems it doesn't recognize the device but it's in device manager.
Edit: have also tried different usb ports and I know the cable works.
Edite 2: I fixed it. Took me hours to get this working but for any one struggling like I was here is what I did.
Got rid of all the drivers and started back at Android 1.0 in device manager. Manually installed the official SDK google usb driver and selected Android Bootloader Interface for Android 1.0. Also boot the phone and manually install again and select Android ADB Interface.
Here is what really caused me problems. The HTC tutorial I looked at said to take adb.exe, fastboot.exe, and adbWinApi.dll and put them in their own folder. This absolutely does not work for me even now. I used the directory straight from the SDK (sdk\platform-tools) and added fastboot.exe from a previous sdk revision into that folder. Now everything works!!! Finally!
Hi everyone!! I have the same issue as brother bassvoykevlar but the solution here expresed is not all clear to me. Can anyone please give me a hand on this, i am really mad with it . Thanks in advance.
The Best Solution
this problem has also happened with me and i found a solution to this,
this usually happens if your system lacks fastboot drivers.
ADB drivers can only Run ADB shell so that is why you need to have fastboot drivers as well to use fastboot commands.
i think you must have tried this code:
"fastboot oem unlock"
then cmd may have got stuck on "waiting for device"
don't worry install drivers for fastboot then it should work.
google it then get it.
there is 15seconds ADB,fasdtboot installer available try that.
then give it another try.
Hi,
Current setup :
Xperia z1 C6903
Three UK
Version 4.4.4
Build 14.4.a.0.108
Rooted
Unlocked Bootloader
adb drivers installed (on xp)
Trying to install Cyanogen Mod.
Flash boot boot .img all worked fine and have CWM recovery screen up.
When I try to use either sideload or adb push I get the same error:
error: device not found
I've googled and searched here and seems to be a driver issue with adb?
I have android SDK (eclipse) and SDK platform tools installed
any thoughts please?
....
...
SOLVED adb driver problem xp device not found
OK, working using universal driver from
http://www.koushikdutta.com/post/universal-adb-driver
Absolutely no idea why XP stopped seeing the phone, and no attempt at driver/sdk updates worked, tried all the ADB drivers I could find including one above, nothing...
then changed usb post after i uninstalled the device from manager (for the 100th time) and ran the adb installer again. and tada there it was :/
hopefully link above might help someone on xp get adb connection working if they are having problems..
Hi,
I just got my ZUK Z2 Pro 6/128GB.
first I had the Problem that the OTA to 2.0.048 was not working. I got the notification but when i tried to download it, it was saying "no Internet Connection". Internet is working with browser or any other app.
After that I downloaded the 2.0.048 directly and installed it via SD Update which worked out fine.
But I still get the notification that there is an OTA update.
My Major Problem is, I tried to switch the Google-Play-Store to German according this How-To
can not post URL... it is the italian How to
Everything worked out fine until I get to this part to “Grant permission” with ADB (run.bat)
I am not able to see my phone in ADB whatever I do.
Had the Standard Drivers installed, used the "Adb Driver installer" and also deinstalled the Driver manually and used this How-To
can not post Url.... it is the way with PdaNet Installation which changed the drivers
Still no phone in ADB.
Do you have any idea how to solve this?
I tried this on 3 different Pc's (2 x WIN 10 + Win 7) in several different USB ports
I've got the same problem.
Any ideas?
I even tried it yesterday on a Win XP machine... no success.
USB Debugging is on of course.
Check post 13 in the thread... it worked for me...
http://zukfans.eu/community/threads/how-to-install-google-play.32/
Funky-Fab-4Strings said:
Check post 13 in the thread... it worked for me...
http://zukfans.eu/community/threads/how-to-install-google-play.32/
Click to expand...
Click to collapse
I tried this method but I still get adb server is out of date. killing... adb server didn't ack * failed to start daemon * error. If I wait long enough I get "list of devices attached" but it's blank. This seems hopeless
Swarai said:
I tried this method but I still get adb server is out of date. killing... adb server didn't ack * failed to start daemon * error. If I wait long enough I get "list of devices attached" but it's blank. This seems hopeless
Click to expand...
Click to collapse
I've executed "ADB DEVICES" for my OP3 and it was listed, but the Z2 pro cannot be seen. Is there a driver that I'm not seeing?
Swarai said:
I've executed "ADB DEVICES" for my OP3 and it was listed, but the Z2 pro cannot be seen. Is there a driver that I'm not seeing?
Click to expand...
Click to collapse
I had the same Problem until i installed the android sdk as descripted in my previous post... Debugging and USB 2.0 is activated in the phone?
Funky-Fab-4Strings said:
I had the same Problem until i installed the android sdk as descripted in my previous post... Debugging and USB 2.0 is activated in the phone?
Click to expand...
Click to collapse
Yes, debugging USB 2.0 are activated. I've set up adb using the android sdk at least twice. When I type "ADB DEVICES" my Oneplus 3 is listed. I do not get the same result for the Zuk z2 pro? I don't know why?
So I've solved my problem. I'll try to explain it the best way I can. Apparently I had 2 sets of ADB in 2 different locations on my computer. I plugged in my other phone and typed "ADB DEVICES" in folder got the same "ADB didn't ACK" result. I tried again in a different folder but it worked. By this time I already updated my Zuk Z2 pro to 2.0.048 ST. Hope this can help. thanks
The problems with adb can have something to do with your time and timezone (check if these are correct)
That is also an issue with contacting the google servers.
To download an OTA you need to have a vpn to a chinese server. It is geo-locked. -> after vpn connection is made, stop update service + clear cache. Then check again, it should work according to some.
Hello everyone, I thought I was having the same problem, so I tried to solve with the methods posted here, but after some research, I found out that the "ADB interface" is not showing in Windows device manager
I tried to install it manually, but can't find a way to get it working, and while it seems my phone just bricked after a failed flash, the USB debugging was set on, so can't figure out what could be happening...
Any idea about how to get it working back?
Thank you in advance.
Just to say that I have tried multiple combinations while plugging the device to the PC, and didn't worked...
I mean, the PC seems to react, but always with the same end, only shows the Qualcomm port 9008, nothing about the adb...
Getting out of ideas, anyone more has some?
Anyone managed to find a solution for this issue?
Thanks!
Update to last adb drivers. It worked for me.
Sooooooooooo,
I have a Z1 [C6903] that I picked up yesterday. It came with 14.2.A.1.136 Jellybean 4.3.
I wanted to
Unlock bootloader
Install custom recovery
Root
Install any nice AOSP ROM [preferably LP-based]
I installed the Minimal ADB-Fastboot 1.4.
I also installed the Flashtool 0.9.18.2.
I also installed the Z1 device, Fastboot, and Flashmode drivers [version 1.6.2] from the driver folder. It first failed, and then I disabled driver verification then everything went smooth!
Device manager recognized the phone in MTP and Fastboot, and Flashmode modes. Drivers installed correctly I presume.
Then the challenges arrive:
adb devices returned it as "offline"
Android studio couldn't push a project to it because it was offline
fastboot devices identified it, but fastboot -i 0x0fce getvar version returned an error [getvar:version FAILED (command write failed (Unknown error))]
Things I've tried to do to rectify the connectivity issue:
I'm using a SurfacePro 4 so I can't switch USB ports [only have one].
I've tried different cables - they yield the same result.
I've enabled and disabled USB debugging, revoked access, unplugged and replugged, rebooted, etc. Still no change in result.
Since the device had some OTA updates pending, I ran those and now i'm on 4.4.4 with 14.4.A.0.157, with some other updates currently waiting for me to accept so they can download. I've decided to post here for help and won't run those updates unless it increases my profit
PS: Even after the updates, adb and fastboot still are unchanged in their results.
Help please
Update:
It was a freaking USB cable. I had tried two of them. None had worked.
I finally unleashed my Anker USB cable and Boom! We good to go!!!
Thanks all!:highfive::highfive::highfive::highfive:
Make sure to enable USB debugging in Developer Options at the bottom of the Settings app
tomascus said:
Make sure to enable USB debugging in Developer Options at the bottom of the Settings app
Click to expand...
Click to collapse
Did this and more. Still to no avail.
The phone shows up in the computer, it just doesn't show as online when I run the adb devices command.
That's what I need help with.
Thanks
ahh have you tried using
Code:
adb kill-server
adb start-server
and trying again?
What should happen is the authorisation window pops up on your phone
tomascus said:
ahh have you tried using
Code:
adb kill-server
adb start-server
and trying again?
What should happen is the authorisation window pops up on your phone
Click to expand...
Click to collapse
Excellent! I did that, too. even manually closed and restarted adb.exe to no avail.
The thing is, my Z1 DOES NOT show me the authorization pop-up! Ever!
I've done this a million times on other phones, and I know the procedure. It's just that this Z1 is not showing the authorization popup
Thoughts?
boydee said:
Excellent! I did that, too. even manually closed and restarted adb.exe to no avail.
The thing is, my Z1 DOES NOT show me the authorization pop-up! Ever!
I've done this a million times on other phones, and I know the procedure. It's just that this Z1 is not showing the authorization popup
Thoughts?
Click to expand...
Click to collapse
Find a quiet corner and cry
Tried running adb as admin?
tomascus said:
Find a quiet corner and cry
Tried running adb as admin?
Click to expand...
Click to collapse
Tried this, too!
No change, anywhere.
I actually went ahead and tried adb on another PC with minimal adb-fastboot and adb drivers installed, and it returned the same "offline" response
Whoa!:angel:
@boydee
this could work with you
i assume that you rooted your phone you will do that:
1. open your favorite file explorer(suggest: ES File Manger)
2.go to /data/misc/adb/
3.delete "adb_keys" file
4.enable usb debugging
5.reinstall your drivers
6.open command and kill adb server(adb kill-server)
7.connect your device and run command (adb devices)
8.look at your device you will find text box telling you a new pc check always trust bla bla and click trust or something like that
9.you will see something like that
http://imgur.com/ReQtofb
How to upgrade to kitkat 4.4.4 India version of c6903 Sony Xperia Z1 pls help
DectonX said:
@boydee
this could work with you
i assume that you rooted your phone you will do that:
1. open your favorite file explorer(suggest: ES File Manger)
2.go to /data/misc/adb/
3.delete "adb_keys" file
4.enable usb debugging
5.reinstall your drivers
6.open command and kill adb server(adb kill-server)
7.connect your device and run command (adb devices)
8.look at your device you will find text box telling you a new pc check always trust bla bla and click trust or something like that
9.you will see something like that
http://imgur.com/ReQtofb
Click to expand...
Click to collapse
Hey, thanks for the advice!!
Finally got root [without use of PC] and when I open the /data/misc/adb/, the folder is EMPTY
A little confused there.
I did the same procedure for the PC [deleting from C:/Users/boydee/.android/] but it also was to no avail.
k9rockstar said:
How to upgrade to kitkat 4.4.4 India version of c6903 Sony Xperia Z1 pls help
Click to expand...
Click to collapse
Hey there! Please check here for a firmware file that works for you.
When you've downloaded, use the Flashtool to flash it to your phone.
If you want help flashing it to your phone, check this thread out.
Hope that helps
boydee said:
Hey, thanks for the advice!!
Finally got root [without use of PC] and when I open the /data/misc/adb/, the folder is EMPTY
A little confused there.
I did the same procedure for the PC [deleting from C:/Users/boydee/.android/] but it also was to no avail.
Click to expand...
Click to collapse
This could problem with installing drivers as PC don't detect adb in debugging mode
So disable driver verification again and install drivers from flashtool remember to check
1. Fastboot drivers
2. Flashmode drivers
3. Xperia Z1 drivers
And restart
If the problem not fixed try adb universal drivers just Google it
I was have same problem with win 8.1 but I didn't all that I just installed win 7 and do it
Remember to backup ta before unlock to backup your DRM keys
I have a problem after updating to latest June Security patch for Nokia 8 TA-1004. I had installed driver long time ago when I wanted to obtain root and there I did it. However, after updating to latest patch which also causes to lose root, I couldn't get my phone to detect adb in cmd. I tried reinstalling driver but still not working. USB Debugging is also on. What could this be the problem? I need help. I want to obtain root back. Thank you very much in advance.
Is your adb up to date? I'm using the latest version of Minimal ADB and Fastboot with bundled driver from my TA-1052, works like a charm.
Get that fork of ADB and Fastboot and use it straight out of cmd :
https://developer.android.com/studio/releases/platform-tools
Rakaloah said:
Is your adb up to date? I'm using the latest version of Minimal ADB and Fastboot with bundled driver from my TA-1052, works like a charm.
Click to expand...
Click to collapse
I've got ADB drivers installed and the N8 is correctly detected as a fastboot device when in "Download mode", however I cannot flash anything, most likely because "adb devices" does not show any device (it is correctly shown when fully booted up). So I'm guessing it's a driver problem...and the problem is that I cannot install the bundled drivers, either on my Win10 (the setup.exe doesn't do anything) laptop or my old W7 laptop (error). Can anyone help ? Thanks !
webvan said:
I've got ADB drivers installed and the N8 is correctly detected as a fastboot device when in "Download mode", however I cannot flash anything, most likely because "adb devices" does not show any device (it is correctly shown when fully booted up). So I'm guessing it's a driver problem...and the problem is that I cannot install the bundled drivers, either on my Win10 (the setup.exe doesn't do anything) laptop or my old W7 laptop (error). Can anyone help ? Thanks !
Click to expand...
Click to collapse
Have a look at my post: https://forum.xda-developers.com/showpost.php?p=78074773&postcount=67
Thanks.