Database Develop

Phone died!! Please Help

Please Help..
i dont know what happened but i turn my phone on and it dislpays only colourful rustle... and it doesnt boot then i boot it in download mode and flash stock rom over odin.. it passed but it doesnt boot anymore but to recovery.. download mode works and recovery .. the samsung logo is gone and there is now the colourful rustle but it only reboots to recoivery mode

Just to clear things up, do you have a i9070 or i9070p? and which firmware did you flash?

panda00 said:
Just to clear things up, do you have a i9070 or i9070p? and which firmware did you flash?
Click to expand...
Click to collapse
I have a I9070P and flashed I9070PXXLK4_I9070PDBTLK1_DBT
i flashed it in Odin with Auto Reboot and F. Reset Time
Recovery, Charging Mode and Download Mode works but it only reboots to Recovery every time
the Boot Logo ("Samsung Galaxy S Advance I9070P) is gone and there is now only colourful rustle but it boots to recovery
The Recovery Log is:
Code:
Deleting Cryption Meta Data
--Copying media files...
Succesfully copied media files.
#MANUAL MODE#
--Updating application...
Copying Contents.
Succesfully updated application.
--Applying MULTI-CSC...
Installing Multi-CSC
Can't access to "/system/csc/DTM/system".
Successfully applied multi-csc.

Karsten95 said:
I have a I9070P and flashed I9070PXXLK4_I9070PDBTLK1_DBT
i flashed it in Odin with Auto Reboot and F. Reset Time
Recovery, Charging Mode and Download Mode works but it only reboots to Recovery every time
the Boot Logo ("Samsung Galaxy S Advance I9070P) is gone and there is now only colourful rustle but it boots to recovery
Click to expand...
Click to collapse
Every time the same error... Flashing i9070 firmware on I9070P and the result is brick
Inviato dal mio GT-I9070 con Tapatalk 2

KINGbabasula said:
Every time the same error... Flashing i9070 firmware on I9070P and the result is brick
Inviato dal mio GT-I9070 con Tapatalk 2
Click to expand...
Click to collapse
No no, he flashed the correct firmware, it says i9070p...
....
So from what I understand, it just automatically reboots into recovery?

In recovery try to wipe data factory reset, davilk cache and cache, then reboot the phone. Or try to remove battery and leave the phone without battery for a while (like 15 min), then power on again and see what happen.

panda00 said:
No no, he flashed the correct firmware, it says i9070p...
....
So from what I understand, it just automatically reboots into recovery?
Click to expand...
Click to collapse
Jep it reboots everytime in recovery and gives out the log.. then i can choose between reboot System, wipe cache etc. when i choose Reboot then it reboots to Recovery Mode
But that scary **** is that the Boot Image(Samsung Logo) is gone or. crashed
rodaven:badly the same

Karsten95 said:
Jep it reboots everytime in recovery and gives out the log.. then i can choose between reboot System, wipe cache etc. when i choose Reboot then it reboots to Recovery Mode
But that scary **** is that the Boot Image(Samsung Logo) is gone or. crashed
rodaven:badly the same
Click to expand...
Click to collapse
Try to flash using oding other firmware, maybe that can work.

rodaven said:
Try to flash using oding other firmware, maybe that can work.
Click to expand...
Click to collapse
I already tried... the same .. Reboot to Recovery and Samsung Logo gone

Karsten95 said:
I already tried... the same .. Reboot to Recovery and Samsung Logo gone
Click to expand...
Click to collapse
Like this? That was my Samsung logo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I solved it by taking phone to service. Didn't have binary counter at 0 - so I payed about 20$ for that.

shut_down said:
Like this? That was my Samsung logo.
I solved it by taking phone to service. Didn't have binary counter at 0 - so I payed about 20$ for that.
Click to expand...
Click to collapse
YEAH damn i hope it is in an other way repairable
can i not reflash boot loader or something ?

Karsten95 said:
YEAH damn i hope it is in an other way repairable
can i not reflash boot loader or something ?
Click to expand...
Click to collapse
No one could help me then. Maybe way was flashing JB, but you will brick phone because you have P version...

shut_down said:
No one could help me then. Maybe way was flashing JB, but you will brick phone because you have P version...
Click to expand...
Click to collapse
Damn i download now Stock rom with CSC and PIT it doesnt work right ?

Karsten95 said:
Damn i download now Stock rom with CSC and PIT it doesnt work right ?
Click to expand...
Click to collapse
I tried to flash stock FW, but in one file. You can try. Not sure if that would help.

shut_down said:
I tried to flash stock FW, but in one file. You can try. Not sure if that would help.
Click to expand...
Click to collapse
Is there a way that i can save the internal memory? my music, pictures etc.? or are they gone with the wipe ? i will try it if download is done
Hmmm we have here no Samsung Service

YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works

Karsten95 said:
YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works
Click to expand...
Click to collapse
Congrats! :good:

Karsten95 said:
YEAH!!! I fixed it YES!
I flashed the PIT File, PDA File and CSC File and i enabled Repartion in Odin... now it flashed Anything new (+Bootloader) and now it works
Click to expand...
Click to collapse
Glad it turn out that way!
Послато са GT-I9070 користећи Тапаток 2

Isn't it just awesome when you get to fix something yourself?
Congratulations

One of the best feelings yeah, nice job
Sent from my GT-I9070 using xda app-developers app

[Q] fail to bootload, what happen ?

I have upgraded my SGSA to jelly bean and then I root the device. but couple of weeks after that I can’t boot into the system normally. I get past the splash screen, get Samsung bootlogo and music and then it continuously repeat Samsung’s animation. I have used CWM and TWRP but there are anything changed. I also have flashed kernel the device without anything changed too. what I should do ?
this is appearing in the recovery mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my kernel is XAMD1. please help me

arief144 said:
I have upgraded my SGSA to jelly bean and then I root the device. but couple of weeks after that I can’t boot into the system normally. I get past the splash screen, get Samsung bootlogo and music and then it continuously repeat Samsung’s animation. I have used CWM and TWRP but there are anything changed. I also have flashed kernel the device without anything changed too. what I should do ?
my kernel is XAMD1. please help me
Click to expand...
Click to collapse
Reflash stock JB with Odin. If you never used it read here

Try a factory reset before reflashing. It might help.

Tesla-MADAL93 said:
Reflash stock JB with Odin. If you never used it read here
Click to expand...
Click to collapse
Sh0m1 said:
Try a factory reset before reflashing. It might help.
Click to expand...
Click to collapse
I have do that but still nothing changed

arief144 said:
I have do that but still nothing changed
Click to expand...
Click to collapse
When you enter in recovery mode does not show any error at the bottom of the screen? If you haven't tried yet, try reflashing also with repartition option enabled just to be safe, and use correct .pit file (GT-I9070_EUR_XX_8G.pit)

Tesla-MADAL93 said:
When you enter in recovery mode does not show any error at the bottom of the screen? If you haven't tried yet, try reflashing also with repartition option enabled just to be safe, and use correct .pit file (GT-I9070_EUR_XX_8G.pit)
Click to expand...
Click to collapse
yes I do, it shows the error notification with red alert and sleep android robot. what should I do ?

arief144 said:
yes I do, it shows the error notification with red alert and sleep android robot. what should I do ?
Click to expand...
Click to collapse
Flash Firmware again with Odin in Download mode. Redownload it, maybe it was corrupted.

shut_down said:
Flash Firmware again with Odin in Download mode. Redownload it, maybe it was corrupted.
Click to expand...
Click to collapse
I have redownload it, but I am still ecountering the problem

arief144 said:
I have redownload it, but I am still ecountering the problem
Click to expand...
Click to collapse
You have I9070? Not I9070P? If that is correct, try to go to GB with guide from here, and then again in JB.

shut_down said:
You have I9070? Not I9070P? If that is correct, try to go to GB with guide from here, and then again in JB.
Click to expand...
Click to collapse
yes, my device is I9070. I have try that procedure a couple days ago, but nothing changed when I downgrade it.

arief144 said:
yes, my device is I9070. I have try that procedure a couple days ago, but nothing changed when I downgrade it.
Click to expand...
Click to collapse
Do you remember what you did/were doing before it began to don't work? Everything is okay, so we can help you better.

Tesla-MADAL93 said:
Do you remember what you did/were doing before it began to don't work? Everything is okay, so we can help you better.
Click to expand...
Click to collapse
I didn't do anything when in one morning my device start to restarting again and again. Sometimes my device was restarting, but it is still entering the menu not like now

arief144 said:
I didn't do anything when in one morning my device start to restarting again and again. Sometimes my device was restarting, but it is still entering the menu not like now
Click to expand...
Click to collapse
Recapitulating:
-You was on Jelly Bean and this problem appeared.
-Tried to Wipe data/Factory reset and reflashing the device with Odin, no luck.
-Tried to downgrade to Gingerbread, no luck.
-Tried to flash Jelly Bean again with repartition enabled, no luck.
Retry to flash 3-parts Gingerbread (the guide that shut_down linked and you followed a couple days ago) with repartition option enabled if you haven't tried yet in Odin v1.85

Tesla-MADAL93 said:
Recapitulating:
-You was on Jelly Bean and this problem appeared.
-Tried to Wipe data/Factory reset and reflashing the device with Odin, no luck.
-Tried to downgrade to Gingerbread, no luck.
-Tried to flash Jelly Bean again with repartition enabled, no luck.
Retry to flash 3-parts Gingerbread (the guide that shut_down linked and you followed a couple days ago) with repartition option enabled if you haven't tried yet in Odin v1.85
Click to expand...
Click to collapse
sorry, what do you mean by "3-parts gingerbread (the guide that shut_down linked and you followed a couple days ago)" ? I don't catch the words

shut_down said:
You have I9070? Not I9070P? If that is correct, try to go to GB with guide from here, and then again in JB.
Click to expand...
Click to collapse
That guide.
arief144 said:
sorry, what do you mean by "3-parts gingerbread (the guide that shut_down linked and you followed a couple days ago)" ? I don't catch the words
Click to expand...
Click to collapse
Sent from my GT-I9070 using Tapatalk

shut_down said:
That guide.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
The file is not available, maybe it has been deleted

arief144 said:
The file is not available, maybe it has been deleted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2195673

shut_down said:
http://forum.xda-developers.com/showthread.php?t=2195673
Click to expand...
Click to collapse
It has the same link with the previous one I have downloaded. so, I have used that procedure with the failed result

arief144 said:
It has the same link with the previous one I have downloaded. so, I have used that procedure with the failed result
Click to expand...
Click to collapse
No, it has d-h.st link, I just downloaded it just in case.
1) Download this package from (http://d-h.st/sA3) just copy and paste the link on ur address bar.
Click to expand...
Click to collapse

shut_down said:
No, it has d-h.st link, I just downloaded it just in case.
Click to expand...
Click to collapse
sorry, I mean in another procedure I have found that link and downloaded it but still failed

[Q] Installing a custom rom

I rooted my phone yesterday and tryed to install cyanogen 10.1 for android 4.2.2, however instead of putting the zip file in the sd card i had put the extracted files, which was a big mistake, as i had wiped out data and then booted as i couldn't find the rom (i am practically a noob since i was doing all this following a guide but i had mistaken zip files for extracted files). Now when i install rom manager it is hard for me to flash anything as it gets stuck in the screen that says "reboot from sd card" or something like that and when i press ok, it gets stuck in that screen, can someone tell me how to install the rom, im thinking of installing probam
can u also tell how to go into recovery manually, i have clockworkmod recovery (5.x.x i think)

adilkaize said:
I rooted my phone yesterday and tryed to install cyanogen 10.1 for android 4.2.2, however instead of putting the zip file in the sd card i had put the extracted files, which was a big mistake, as i had wiped out data and then booted as i couldn't find the rom (i am practically a noob since i was doing all this following a guide but i had mistaken zip files for extracted files). Now when i install rom manager it is hard for me to flash anything as it gets stuck in the screen that says "reboot from sd card" or something like that and when i press ok, it gets stuck in that screen, can someone tell me how to install the rom, im thinking of installing probam
can u also tell how to go into recovery manually, i have clockworkmod recovery (5.x.x i think)
Click to expand...
Click to collapse
Noob . search. Peace out.
Sent from my LG-P880 using xda app-developers app

GalaxyVolvoZ said:
Noob . search. Peace out.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
You really don't have to be this rude. We all know that it's annoying to see these threads every two days but that's not an excuse for breaking the rules.
For OP: Search the Forums for Root, Bootloader Unlock and Custom Roms. You should read everything before trying something to prevent damage or you'll probably create a "I bricked my phone! Help!"-thread in two days
The key combo for recovery is vol down + power and release power when LG logo appears or it will reboot (a one minute search for "manually access cwm", just saying)
Sent from my 4X HD via XDA Premium

adilkaize said:
I rooted my phone yesterday and tryed to install cyanogen 10.1 for android 4.2.2, however instead of putting the zip file in the sd card i had put the extracted files, which was a big mistake, as i had wiped out data and then booted as i couldn't find the rom (i am practically a noob since i was doing all this following a guide but i had mistaken zip files for extracted files). Now when i install rom manager it is hard for me to flash anything as it gets stuck in the screen that says "reboot from sd card" or something like that and when i press ok, it gets stuck in that screen, can someone tell me how to install the rom, im thinking of installing probam
can u also tell how to go into recovery manually, i have clockworkmod recovery (5.x.x i think)
Click to expand...
Click to collapse
OK in order to flash custom rom you are required more than rooting.
those are the stages you must fulfill in order to flash :
1- Root :as u say u already rootd " u can check if u rooted properly or not by root checker.apk at play store"
2-Unlock bootloader :you can choose between any ways i prefer two ways 1- http://forum.xda-developers.com/showthread.php?t=2263627
b- http://forum.xda-developers.com/showthread.php?t=2224020
"you can check if bootloader unlocked properly by hiting 3845#*880# then bootloader then checkbootloader the unlock " u should see this "
3- flash custom recovery : i prefer CWM through that http://forum.xda-developers.com/showthread.php?t=2298420
4- Flash to custom ROM : a- choose ur ROM ,download it as zip file - download Gapps if u like b-put them in to sd card and boot in recovery " power + vol-" choose to install zip file - install first the ROM then GAPPS " optional " - DON"T FORGET TO WIPE DATA AND CASH " after installation to be stable

if he wipes his cash , please call me get some because im low these days
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kessaras said:
if he wipes his cash , please call me get some because im low these days
Click to expand...
Click to collapse
We all wanna to .. Sorry i was writing from my work so i was in hurry . If the manager have seen me , i would be F**ed.
IT cache

Problem Making Nandroid Backup via Rom Manager

Sir I tried to Make A NANDROID BACKUP from ROM MANAGER
I Already Installed CWM Recovery & TWRP
When I press REBOOT IN TO RECOVERY i am not getting any Option of Making Backup of My Note N7000
Black Screen Appear only
Then I have to restart my Mobile Again pls Help me..Sir
THANK U In Advance

superdude.xi said:
Sir I tried to Make A NANDROID BACKUP from ROM MANAGER
I Already Installed CWM Recovery & TWRP
When I press REBOOT IN TO RECOVERY i am not getting any Option of Making Backup of My Note N7000
Black Screen Appear only
Then I have to restart my Mobile Again pls Help me..Sir
THANK U In Advance
Click to expand...
Click to collapse
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?

You can't install CWM and TWRP at the same time. So my guess: you didn't install one of them successfully and that's the reason for the missing Backup option.
What Rom are you using? If stock rom go to Philz thread and download an install the correct kernel for your version. After that you'll have a recovery with backup options.
---------- Post added at 12:51 PM ---------- Previous post was at 12:51 PM ----------
nokiamodeln91 said:
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?
Click to expand...
Click to collapse
I just did...

nokiamodeln91 said:
How did you install recovery? What's the rom details? Do you want us to aim in the DARK?
Click to expand...
Click to collapse
Sir
I am Giving All the Informations Below Please check it. and i am Attaching The Screenshorts Too sir
Actually Both CWM and TWRP already Installed In my Device I just Update my CWM Recovery Sir. and I just tried to make Nandroid backup By Using Rom Manager When I click to " Reboot In to Recovery" No options appearing for backup and Restore please check the SCREEN SHORTS
and sir After Reboot Red "!" mark with android logo coming
Model : Note N7000 , Rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sir i am a noob just trying to learning the things dont mind pls help me

As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery

Del

ThaiDai said:
As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery
Click to expand...
Click to collapse
Sir I remember It Next time Sorry sir..
Can you Please provide me a Link of my kernel because in Philz thread there are Many Links and Infos i am Confusing a Bit sir
I hope U understand ( i already posted a screenshort of my kernel ) please provide me a Link so that i download and install it..
and one More Q sir.. if I install a kernel.. before it i have to backup my apps and messages ? or Not ?

Please no PM with the same questions. Asking and answering questions in public is the preferred way.
If you want to understand what you do you'll have to read the threads and try to understand what is written. The thread owner doesn't do this for fun or because he wants to waste time.
You'll find the kernel in post 3 of Philz thread, there is a link after "tw only:". This will bring you to dev-host and folder with different versions (the one with 5.11.2 contains your kernel).
And after downloading please follow the instructions how to install. It really isn't so difficult.
(A final one: please no "sir", absolutely not necessary and makes me feel like I'm at the wrong place)

ThaiDai said:
As I said: go to Philz thread, download a Kernel for your DDLSC and install it. Then you can boot into recovery.
I do not like tools like this for these basic steps - so no help with the tool from me.
And:
please recharge your battery and don't ever try to do things in backup with a nearly empty battery
Click to expand...
Click to collapse
ThaiDai said:
Please no PM with the same questions. Asking and answering questions in public is the preferred way.
If you want to understand what you do you'll have to read the threads and try to understand what is written. The thread owner doesn't do this for fun or because he wants to waste time.
You'll find the kernel in post 3 of Philz thread, there is a link after "tw only:". This will bring you to dev-host and folder with different versions (the one with 5.11.2 contains your kernel).
And after downloading please follow the instructions how to install. It really isn't so difficult.
(A final one: please no "sir", absolutely not necessary and makes me feel like I'm at the wrong place)
Click to expand...
Click to collapse
Sir I Install PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip this One.. But Now i reboot My Phone only Samsung GALAXYNOTE Gt N7000 is appearing.. its not starting OMG sir.. what can i do Now.. help me.. i just Installed PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip this one ( ( please help me

please Any one Help Me.. My Phone Got Stuck After Installing The PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
What Should I do.. Only SAMSUNG GALAXT NOTE GT-N7000 Appear Help me Please.. please ( ( : ((

Are you telling me now that you did install the kernel with only 14% battery charge?
How did you install it?
Can you boot into the new recovery?

superdude.xi said:
please Any one Help Me.. My Phone Got Stuck After Installing The PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
What Should I do.. Only SAMSUNG GALAXT NOTE GT-N7000 Appear Help me Please.. please ( ( : ((
Click to expand...
Click to collapse
Can you please explain what recovery did you have and how did you install the zip version of the kernel?

ThaiDai said:
Are you telling me now that you did install the kernel with only 14% battery charge?
How did you install it?
Can you boot into the new recovery?
Click to expand...
Click to collapse
No I charged The Battery Bro I just Out This Zip File PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip In to External SD Card Then I Switchoff My Cell then.. I press
Volume Up Powerkey and Middle key..
Then I selected UPDATE FROM EXTERNAL CARD
then I Select this File PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
After That it opens and then when I restarted My phone It STUCK (((
only Sansung GALAXY NOTE N7000 Appearing.. ( no Options is Coming Now what to Do ( help me Otherwise I lost My phone..

nokiamodeln91 said:
Can you please explain what recovery did you have and how did you install the zip version of the kernel?
Click to expand...
Click to collapse
First I Put This Zip In My EXTERNAL SD CARD : PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
Then I Switch Of My Phone
Then I Press POwer Switch Middle Switch and Volume Up key...
Then I select the Option Install from External SD
I select the ZIP file
After that android Logo Comes animated revolving logo.. My phone starts but when i restart to see recovery option coming or not My phone Got Stuck and only appearing " Samsung GALAXY NOTE GT -N7000

superdude.xi said:
First I Put This Zip In My EXTERNAL SD CARD : PhilZ-cwm6-DDLSC-ODD-5.11.2-signed.zip
Then I Switch Of My Phone
Then I Press POwer Switch Middle Switch and Volume Up key...
Then I select the Option Install from External SD
I select the ZIP file
After that android Logo Comes animated revolving logo.. My phone starts but when i restart to see recovery option coming or not My phone Got Stuck and only appearing " Samsung GALAXY NOTE GT -N7000
Click to expand...
Click to collapse
Does the phone boot normally? or Not?
Can you get into the CWM philz recovery?

nokiamodeln91 said:
Does the phone boot normally? or Not?
Can you get into the CWM philz recovery?
Click to expand...
Click to collapse
No sir The Phone Not Boot Normally.. After Installing a Zip file When it Stars a Dark Brown Colour Android Logo Coming With Revolving and the phone starts After that i Restart it got STUCK ! Now what can i Do i only wanted to nanddroid backup.. so that my phone will always safe now its gone

superdude.xi said:
No sir The Phone Not Boot Normally.. After Installing a Zip file When it Stars a Dark Brown Colour Android Logo Coming With Revolving and the phone starts After that i Restart it got STUCK ! Now what can i Do i only wanted to nanddroid backup.. so that my phone will always safe now its gone
Click to expand...
Click to collapse
May be better to download DDLSC rom and flash it via Odin to revert most of the changes done to system, recovery and kernel partitions.

nokiamodeln91 said:
May be better to download DDLSC rom and flash it via Odin to revert most of the changes done to system, recovery and kernel partitions.
Click to expand...
Click to collapse
How to get DDLC Rom ? tell me i will Download
and How Odin will Work I dont know and my battery also not showing charging

superdude.xi said:
How to get DDLC Rom ? tell me i will Download
and How Odin will Work I dont know and my battery also not showing charging
Click to expand...
Click to collapse
Follow the install instructions from here:
http://forum.xda-developers.com/showthread.php?t=1424997 and download rom from either sammobile.com or samsung-updates.com/

treacherous_hawk said:
Follow the install instructions from here:
http://forum.xda-developers.com/showthread.php?t=1424997 and download rom from either sammobile.com or samsung-updates.com/
Click to expand...
Click to collapse
I have Successfully Recovered My Mobile With Official Stock Rom Flash Via Odin.
Now.. Am giving Each and every Detail. Please Suggest me How get In to The Recovery Mode.
_______________________________________
I Updated The CWM From Rom Manager.
When I restarted The Mobile and Press Volume Up + Power + Home Button I get Only These Options
Android System recovery <3e>
Volume up/down to move highlight:
power button to select
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
______________________________________
[ here one DEAD ANDROID ICON with RED TRIANGLE]
#manual mode#
--Appling Multi-CSC...
Applied the CSC-code :INU
successfully applied multi-CSC.
==========================================
the Problem is I want To make a Nandroid Backup and I aam Not getting the Option of backup and Restore When I press Reboot In to Recovery Via rom manager.
Screenshot :
In PhilZ Thread Which I have to Download ?
helP me

[Q] Problem with my p880 after installing android.

Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?

kanaal said:
Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?
Click to expand...
Click to collapse
Try installing Symbian , just kidding.
Did you unlock the bootloader of the phone while you were on stock rom?

fuathan said:
yeah guys I ask anything ?
Click to expand...
Click to collapse
Apparently you do.

Coolneng said:
Try installing Symbian , just kidding.
Did you unlock the bootloader of the phone while you were on stock rom?
Click to expand...
Click to collapse
Yes, I unlocked the bootloader

kanaal said:
Hey guys, I'm new here..idk if this is the right category but here we go: I tried to upgrade the software from the phone and after reboot just went in recovery mode and I found out I have no android. After that I copied stable cm 10.1 gapps on my sd card then I tried to install the zips, everything seemed ok..I restarted the phone and it went straight to recovery mode. I did the same thing with the android 4.4.2 MoKee and happend the same thing. What should i do?
Click to expand...
Click to collapse
Can you little better describe how did you upgrade the software. Recovery, rom etc. Did you start at stock ICS or JB?

LGaljo said:
Can you little better describe how did you upgrade the software. Recovery, rom etc. Did you start at stock ICS or JB?
Click to expand...
Click to collapse
I had stock JB and I had this program in menu "Software update" and it was an 19-25 mb update..I downloaded and I installed the update then the phone rebooted and it went in cwm recovery. If I install a custom rom everything seems ok, after reboot it enter straight to recovery and I don't know why.

kanaal said:
I had stock JB and I had this program in menu "Software update" and it was an 19-25 mb update..I downloaded and I installed the update then the phone rebooted and it went in cwm recovery. If I install a custom rom everything seems ok, after reboot it enter straight to recovery and I don't know why.
Click to expand...
Click to collapse
If you set up working stock JB follow this:
*prepare custom ROM, kernel and Gapps then copy to SD
*if you want CWM download this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img, then copy *.img file to a folder where adb is installed and rename it to recovery.img
*boot to fastboot mode (adb reboot oem-unlock)
*install recovery in fastboot mode (fastboot flash recovery recovery.img)
*power off, then boot to recovery
*flash ROM, Gapps and kernel

LGaljo said:
If you set up working stock JB follow this:
*prepare custom ROM, kernel and Gapps then copy to SD
*if you want CWM download this: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.4.5-p880.img, then copy *.img file to a folder where adb is installed and rename it to recovery.img
*boot to fastboot mode (adb reboot oem-unlock)
*install recovery in fastboot mode (fastboot flash recovery recovery.img)
*power off, then boot to recovery
*flash ROM, Gapps and kernel
Click to expand...
Click to collapse
Ok, I will try this but can you suggest me a good custom ROM and kernel? I never installed a kernel before and i don't know what to look for

kanaal said:
Ok, I will try this but can you suggest me a good custom ROM and kernel? I never installed a kernel before and i don't know what to look for
Click to expand...
Click to collapse
You don't really need different kernel, for first start I suggest you official CM11 nightly
Hit thanks if it helps

LGaljo said:
You don't really need different kernel, for first start I suggest you official CM11 nightly
Hit thanks if it helps
Click to expand...
Click to collapse
While I try to install the cwm I get this error http://i.imgur.com/d9nPSeI.jpg I installed with my cwm 6.0.4.4 the CM11 gapps and this kernel http://forum.xda-developers.com/showthread.php?t=2241474 all of these installed with no problems, after that i reboot and the cwm recovery appears w/o pressing the volume button.

kanaal said:
While I try to install the cwm I get this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I installed with my cwm 6.0.4.4 the CM11 gapps and this kernel http://forum.xda-developers.com/showthread.php?t=2241474 all of these installed with no problems, after that i reboot and the cwm recovery appears w/o pressing the volume button.
Click to expand...
Click to collapse
I recommend you not to use this kernel, it is deprecated. Try without flashing different kernel first. Which CWM did you download? From link I gave?
EDIT: Have you done formats of /system, /data, /cache ?

You bugged out your device. OTA doesnt work properly with custom recovery installed. Reflash kdz to fix the issue,but try grabbing everything you need from via adb from recovery first as you may have to do hard reset from stock recovery which will format your internal sd (in case you dont know how to flash custom recovery via fastboot)

LGaljo said:
I recommend you not to use this kernel, it is deprecated. Try without flashing different kernel first. Which CWM did you download? From link I gave?
EDIT: Have you done formats of /system, /data, /cache ?
Click to expand...
Click to collapse
Yes, from the link you gave me and I did formated the /system, /data and /cache
Flying_Bear said:
You bugged out your device. OTA doesnt work properly with custom recovery installed. Reflash kdz to fix the issue,but try grabbing everything you need from via adb from recovery first as you may have to do hard reset from stock recovery which will format your internal sd (in case you dont know how to flash custom recovery via fastboot)
Click to expand...
Click to collapse
What kdz is? Sorry, but i'm new in this thing.

kanaal said:
Yes, from the link you gave me and I did formated the /system, /data and /cache
What kdz is? Sorry, but i'm new in this thing.
Click to expand...
Click to collapse
You can reflash or put phone to stock state with using lgmobile support tool. Just put phone in S/W mode (volume down and USB cable plug in) and in dropdown menu select update recovery

LGaljo said:
You can reflash or put phone to stock state with using lgmobile support tool. Just put phone in S/W mode (volume down and USB cable plug in) and in dropdown menu select update recovery
Click to expand...
Click to collapse
Ok, so i was following this tutorial http://forum.xda-developers.com/showthread.php?t=2069723 and on LG Mobile Support when I press install usb driver I can't find LGP880, why? maybe something is missing from pc like drivers or something like that?
EDIT: I did it, my phone works fine thank you very much! one more thing..can i install CM11 w/o problems now? i mean while i'm on 4.1.2

kanaal said:
Ok, so i was following this tutorial http://forum.xda-developers.com/showthread.php?t=2069723 and on LG Mobile Support when I press install usb driver I can't find LGP880, why? maybe something is missing from pc like drivers or something like that?
EDIT: I did it, my phone works fine thank you very much! one more thing..can i install CM11 w/o problems now? i mean while i'm on 4.1.2
Click to expand...
Click to collapse
yes, you can. the bug you encountered only happens when you use OTA with modified stock firmware.
good luck :good:

Flying_Bear said:
yes, you can. the bug you encountered only happens when you use OTA with modified stock firmware.
good luck :good:
Click to expand...
Click to collapse
Ok, I got it. Thank you! One more thing, I swear it! When I try to root my phone (I follow this guide http://forum.xda-developers.com/showthread.php?t=1818502 ), the SystemBackupTest doesn't work, I googled the problem and I found nothing.

kanaal said:
Ok, I got it. Thank you! One more thing, I swear it! When I try to root my phone (I follow this guide http://forum.xda-developers.com/showthread.php?t=1818502 ), the SystemBackupTest doesn't work, I googled the problem and I found nothing.
Click to expand...
Click to collapse
you are using deprecated method. that's method for ics. search for a way to root jellybean 20a.