Hi,
I was gonna flash the ROM Android Revolution HD Sense when i came from CM11. I did wipe/factory reset and after that installed the ARHD but when i did the reboot i got stuck at the HTC logo and now i can´t acess cwm recovery. when i press power+volume down i see the recovery logo and it says swipe to right to enter but after that im stuck at HTC logo again.....
Plz help me
Karlzzzon said:
cwm recovery
Click to expand...
Click to collapse
Like sais in the ARHD thread the rom MUST be flashed with TWRP 2.6.3.3 or higher.
Android Revolution HD 53.0
--- MD5 Checksum: DF9854F79C6E6928BEFD6EC43EC9F4A5 ---
You need TRWP 2.6.3.3 recovery!
Flashing KitKat F.A.Q. - click here
Click to expand...
Click to collapse
alray said:
Like sais in the ARHD thread the rom MUST be flashed with TWRP 2.6.3.3 or higher.
Click to expand...
Click to collapse
It depends on the ARHD version.
As far as i know you can flash the v31.6 with cwm. Or am i wrong?
@Karlzzzon: Which version do you want to flash? 31.6, 53 or 60?
You need to do
fastboot erase cache
That will allow you to get into recovery.
R34LY said:
It depends on the ARHD version.
As far as i know you can flash the v31.6 with cwm. Or am i wrong?
@Karlzzzon: Which version do you want to flash? 31.6, 53 or 60?
Click to expand...
Click to collapse
correct Arhd versions with android 4.4+ require twrp 2.6.3.3 not arhd 31.6
Same issue...
Hi guys,
I stupidly did exactly the same mistake as @Karlzzzon... I'm currently stuck with the HTC logo and have no access to the recovery.
I understood from your previous answers that I should have flashed with TWRP 2.6.3.3, which I'd like to do now. But how am I supposed to do that considering that I can't get to the recovery ?
Thanks in advance for your answers !
VieuMa
VieuMa said:
Hi guys,
I stupidly did exactly the same mistake as @Karlzzzon... I'm currently stuck with the HTC logo and have no access to the recovery.
I understood from your previous answers that I should have flashed with TWRP 2.6.3.3, which I'd like to do now. But how am I supposed to do that considering that I can't get to the recovery ?
Thanks in advance for your answers !
VieuMa
Click to expand...
Click to collapse
flash twrp recovery
erase cache
boot recovery
install the rom
alray said:
flash twrp recovery
erase cache
boot recovery
install the rom
Click to expand...
Click to collapse
Thanks @alray for your quick answer !
I just have one more question : how can I flash TWRP without using the recovery ?
VieuMa said:
Thanks @alray for your quick answer !
I just have one more question : how can I flash TWRP without using the recovery ?
Click to expand...
Click to collapse
even if its possible to flash a recovery.zip directly from recovery, the usual way to flash it is from fastboot using a recovery.img
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
assuming your phone is a M7_UL or M7_U:
download twrp 2.6.3.3 from here (make sure MD5 match 72067aefb69541d40e8420d7aa46408d) and save it to your adb folder then:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
your rom.zip should still be there so just install it again
if not
adb push it to your /sdcard
alray said:
even if its possible to flash a recovery.zip directly from recovery, the usual way to flash it is from fastboot using a recovery.img
Code:
fastboot flash recovery name_of_file.img
fastboot erase cache
assuming your phone is a M7_UL or M7_U:
download twrp 2.6.3.3 from here (make sure MD5 match 72067aefb69541d40e8420d7aa46408d) and save it to your adb folder then:
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
your rom.zip should still be there so just install it again
if not
adb push it to your /sdcard
Click to expand...
Click to collapse
Alright, I didn't remember using fastboot in the past, only adb.
Worked like a charm, thanks a LOT for your time and your complete answers !
VieuMa said:
Alright, I didn't remember using fastboot in the past, only adb.
Worked like a charm, thanks a LOT for your time and your complete answers !
Click to expand...
Click to collapse
np, happy flashing
Related
So I'm having a hard time here LOL.
I come from a soft brick and after some issues I got my m7_ul back to stock, which is great as it is alive again Now I want to flash a decent ROM, I have thought about ViperOne. However my TWRP 2.7.1.1 seems corrupted, I can't even enter it and I have had a couple of scary moments as the phone won't boot to system. Finally pressing the power button for like 30 seconds did the job and it booted to system. Stock ROM sucks but it is better than a brick haha.
My phone is international m7_ul, my HBOOT is 1.44 and I have Tampered and Unlocked labels, not sure what should I do exactly. Just want the basic strategy to get my custom ROM running and later on I will add a soundmod but that should be easier.
Dani84 said:
So I'm having a hard time here LOL.
I come from a soft brick and after some issues I got my m7_ul back to stock, which is great as it is alive again Now I want to flash a decent ROM, I have thought about ViperOne. However my TWRP 2.7.1.1 seems corrupted, I can't even enter it and I have had a couple of scary moments as the phone won't boot to system. Finally pressing the power button for like 30 seconds did the job and it booted to system. Stock ROM sucks but it is better than a brick haha.
My phone is international m7_ul, my HBOOT is 1.44 and I have Tampered and Unlocked labels, not sure what should I do exactly. Just want the basic strategy to get my custom ROM running and later on I will add a soundmod but that should be easier.
Click to expand...
Click to collapse
If you returned to stock you have re flash custom recovery
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7ul
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Suggest re-download, the re-flash TWRP, flash in fastboot fastboot flash recovery <name of recovery.img> and then fastboot erase cache, this should allow you to enter recovery.
wow that was fast thanks, problem solved, I'm now running TWRP 2.6.3.4
so now I just place the desired ROM flash it, wipe dalvik and cache, and voila, right? will try to find if viperone is compatible with m7ul, I had a problem with ARHD 71.1
Dani84 said:
wow that was fast thanks, problem solved, I'm now running TWRP 2.6.3.4
so now I just place the desired ROM flash it, wipe dalvik and cache, and voila, right? will try to find if viperone is compatible with m7ul, I had a problem with ARHD 71.1
Click to expand...
Click to collapse
They will both work great with your current recovery installed
clsA said:
If you returned to stock you have re flash custom recovery
Click to expand...
Click to collapse
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
CostasV23 said:
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
Click to expand...
Click to collapse
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
alray said:
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
The thing that did the trick for me was downloading the .img file from the twrp site and flashing with flashify after that it worked . thanks for your time
CostasV23 said:
The thing that did the trick for me was downloading the .img file from the twrp site and flashing with flashify after that it worked . thanks for your time
Click to expand...
Click to collapse
Yep, thats a way to do it, I prefer to use fastboot but if you don't have a computer to work with then its a good alternative. :good:
CostasV23 said:
Hello I flashed twrp recovery through twrp manager app which showed an error but after pressing reboot to twrp it did but I got a red triangle error sign his can I fix it?
Click to expand...
Click to collapse
alray said:
simply flash twrp using fastboot. Easy, fast and reliable.
Code:
fastboot flash recovery name_of_recovery.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
wholly smokes this thread is 2 years old how did it come back ? I feel like Ive been resurrected
clsA said:
wholly smokes this thread is 2 years old how did it come back ? I feel like Ive been resurrected
Click to expand...
Click to collapse
That's my bad actually . I was searching how to install a recovery after the red triangle for the s4 mini plus which is a completely different device and it wasn't until later I realised this thread is for the m7 and I couldn't delete it afterwards so my bad yeah
why can't I flash a diferrent recovery on my HTC ONE M7? if I install any other recovery that not be twrp 2.6.3.3 it keeps on entering recovery, but if I install TWRP 2.6.3.3 it works... I need install multirom recovery.... please help
spinoza23 said:
why can't I flash a diferrent recovery on my HTC ONE M7? if I install any other recovery that not be twrp 2.6.3.3 it keeps on entering recovery, but if I install TWRP 2.6.3.3 it works... I need install multirom recovery.... please help
Click to expand...
Click to collapse
Download the multirom recovery and the clean TWRP and place in your adb/fastboot folder.
Open a command window in your adb/fastboot folder
Boot into bootloader/FASTBOOT USB
Type the following commands:
Code:
fastboot flash recovery openrecovery-twrp-2.8.0.2-m7.img
fastboot erase cache
fastboot reboot-bootloader
Then type:
Code:
fastboot flash recovery TWRP_multirom_m7_20140926.img
fastboot erase cache
fastboot reboot-bootloader
thanks, but it doesn't work...
Try a different USB cable.
spinoza23 said:
thanks, but it doesn't work...
Click to expand...
Click to collapse
You may have to start over.
Copy all of your personal items off of the phone
Flash stock recovery
Boot into recovery and perform factory reset
Flash multi-rom recovery
Flash custom kernel
sorry, but it doesn't work .... just says "entering recovery..."
spinoza23 said:
sorry, but it doesn't work .... just says "entering recovery..."
Click to expand...
Click to collapse
Does it say "entering recovery" on the stock or custom recovery?
Have you changed:
<> cables?
<> USB Ports?
<> Computer?
First try stock firmware with stock recovery & kernel
If fails, stock RUU for your phone
spinoza23 said:
sorry, but it doesn't work .... just says "entering recovery..."
Click to expand...
Click to collapse
Are you using
Code:
fastboot erase cache
after you flash the new recovery?
Edit :- never mind I see now majmoz already instructed you to erase cache.
Flashing a firmware.zip should get you back to stock recovery.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Danny201281 said:
Are you using
Code:
fastboot erase cache
after you flash the new recovery?
Edit :- never mind I see now majmoz already instructed you to erase cache.
Flashing a firmware.zip should get you back to stock recovery.
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
Click to expand...
Click to collapse
I Flashed last firmware but still can't install another twrp recovery official or unofficial only 2.6.3.3 or lower version works.... Pliz works but no others
spinoza23 said:
I Flashed last firmware but still can't install another twrp recovery official or unofficial only 2.6.3.3 or lower version works.... Pliz works but no others
Click to expand...
Click to collapse
When you flashed the stock firmware (unmodified) did you boot into recovery and do a factory reset?
After factory reset did you reboot into recovery after it so that the wipe will take?
If flashing a pure stock firmware didn't work then you next option would be to try the RUU for your phone.
majmoz said:
When you flashed the stock firmware (unmodified) did you boot into recovery and do a factory reset?
After factory reset did you reboot into recovery after it so that the wipe will take?
If flashing a pure stock firmware didn't work then you next option would be to try the RUU for your phone.
Click to expand...
Click to collapse
my next option would be to try the RUU for my phone.
spinoza23 said:
my next option would be to try the RUU for my phone.
Click to expand...
Click to collapse
And you've checked your sdk is up to date?
Can you try flash recovery again with fastboot erase cache. It doesn't matter if it does not take, but please post the full output from your command window. So I can see exactly what you get. Thanks
Sent from my HTC One M7 - ARHD 81.0 Using Tapatalk
If you found my posts helpful, Please click thanks :good:
So i tried to install cm-11 nightly using twrp to help remove my s-on but it had a binary error so i tried deleting the data but instead i deleted the OS and the backup that i made..... ._. so, i need the stock rom that i can install via adb sideload and i may also need some help with the sideloading because at this point i am really angry, stuck using an atrix 2, and really confused, please help
king of Cerwin-Vega! said:
So i tried to install cm-11 nightly using twrp to help remove my s-on but it had a binary error so i tried deleting the data but instead i deleted the OS and the backup that i made..... ._. so, i need the stock rom that i can install via adb sideload and i may also need some help with the sideloading because at this point i am really angry, stuck using an atrix 2, and really confused, please help
Click to expand...
Click to collapse
you don't need a t-mobile rom
you can flash ARHD to get you going then get the rom you want.
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_81.0.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
After that try firewater to get s-off
if it fails flash the bulletproof kernel and try again
clsA said:
you don't need a t-mobile rom
you can flash ARHD to get you going then get the rom you want.
Flash recovery TWRP 2.6.3.3
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
After that try firewater to get s-off
if it fails flash the bulletproof kernel and try again
Click to expand...
Click to collapse
ok thank you for your input but the like for the rom does not work the page says "This filename doesn't exist" any other ways to get that rom?
king of Cerwin-Vega! said:
ok thank you for your input but the like for the rom does not work the page says "This filename doesn't exist" any other ways to get that rom?
Click to expand...
Click to collapse
Link fixed above
clsA said:
Link fixed above
Click to expand...
Click to collapse
hey!!!! thanks for your help it worked 100%
king of Cerwin-Vega! said:
hey!!!! thanks for your help it worked 100%
Click to expand...
Click to collapse
Your welcome
you may want to join the T-mobile forums to get a different rom with wifi calling and such >> http://forum.xda-developers.com/htc-one-tmobile
So I have the International HTC One M7, and whenever i flash any recovery except for PhilZ it says successful on fastboot but when i go into recovery from bootloader it shows entering recovery... at top then the screen goes black for 2 seconds and then gets stuck at entering recovery indefinately. I cant use PhilZ mainly due to i keep getting errors (status 0) whenever i flash a rom. Any help ?
Thanks
mrsimpson321 said:
So I have the International HTC One M7, and whenever i flash any recovery except for PhilZ it says successful on fastboot but when i go into recovery from bootloader it shows entering recovery... at top then the screen goes black for 2 seconds and then gets stuck at entering recovery indefinately. I cant use PhilZ mainly due to i keep getting errors (status 0) whenever i flash a rom. Any help ?
Thanks
Click to expand...
Click to collapse
you have to do all the commands
First get TWRP 2.6.3.3
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
If you have a Sprint or Verizon phone you need their custom recovery version
Thanks
clsA said:
you have to do all the commands
First get TWRP 2.6.3.3
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
If you have a Sprint or Verizon phone you need their custom recovery version
Click to expand...
Click to collapse
Thank you so much for your help. This is why i go to XDA first
mrsimpson321 said:
Thank you so much for your help. This is why i go to XDA first
Click to expand...
Click to collapse
What is it in TWRP 2.6.3.3 that not doing what you want?
Why are you changing recovery 3 times in the same day ?
clsA said:
What is it in TWRP 2.6.3.3 that not doing what you want?
Why are you changing recovery 3 times in the same day ?
Click to expand...
Click to collapse
I want to upgrade to InsertCoin but Aroma installer says i need to update to 2.7.1.1 I think
mrsimpson321 said:
I want to upgrade to InsertCoin but Aroma installer says i need to update to 2.7.1.1 I think
Click to expand...
Click to collapse
Pretty strange ...your the first to have a problem with 2.6.3.3 flashing any of the current roms.
Whats the error you get when flashing 2.7.1.1 recovery ?
clsA said:
Pretty strange ...your the first to have a problem with 2.6.3.3 flashing any of the current roms.
Whats the error you get when flashing 2.7.1.1 recovery ?
Click to expand...
Click to collapse
I have the same problem, I can only flash up to TWRP 2.6.3.3 older versions work, but other new versions dont work it keeps saying "entering recovery"... If try to flash Pliz some versions works other versions keep saying entering recovery, I need install multirom but cant install it or another version of TWRP up to 2.6.3.3
I try erasing cache from fastboot but it dont work, my hboot is 1.57 with s-off and unlocked
The same with me except for S-on and flashing 2.7.1.1 (or ANY other recovery) gives me the entering recovery words at the top in a bootloop until i am forced to fastboot 2.6.3.3 with the method above.
Hey guys,
I've got a big problem with my recovery. But first things first: I got my One (M7) about two or three weeks ago, flashed TWRP 2.8.3.0 and rooted via flashing the SuperSU.zip.
Yesterday I finally had time to install CM11. So I wanted to enter the recovery, first via the Power-Off menu (have a XPosed Module that added a shortcut for it) then via the bootloader and then via ADB. The "Entering-Recovery..."-Screen appears, then disappears for 2 seconds and then reappers and the phone is stuck with it, nothing happens, TWRP doesn't start.
So I tried to reflash the recovery via ADB but it doesn't help.
Does anyone have an idea about how I get my recovery working again?
Greetings from germany
Edit: If it helps: I'm on stock rom with S-On on HBOOT 1.57
fastboot erase cache
Already tried that after installing TWRP. Shall I do that before installing?
Edit: I tried fastboot erase cache now pre- and past-flashing TWRP 2.8.4.0.... nothing's changed
NotoriusBB said:
Already tried that after installing TWRP. Shall I do that before installing?
Edit: I tried fastboot erase cache now pre- and past-flashing TWRP 2.8.4.0.... nothing's changed
Click to expand...
Click to collapse
Are you following these steps:
In bootloader/FASTBOOT USB:
Code:
fastboot flash recovery openrecovery-twrp-2.8.3.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
Have you tried other version?
I believe you must use 2.8.0.0 and above for CM11.
NotoriusBB said:
Already tried that after installing TWRP. Shall I do that before installing?
Edit: I tried fastboot erase cache now pre- and past-flashing TWRP 2.8.4.0.... nothing's changed
Click to expand...
Click to collapse
majmoz said:
Are you following these steps:
In bootloader/FASTBOOT USB:
Code:
fastboot flash recovery openrecovery-twrp-2.8.3.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
Have you tried other version?
I believe you must use 2.8.0.0 and above for CM11.
Click to expand...
Click to collapse
When your recovery will not load like this the easy way to fix it is to reflash the current firmware on the phone again
this writes the stock recovery back to the phone and most times TWRP will work again after this
majmoz said:
Are you following these steps:
In bootloader/FASTBOOT USB:
Code:
fastboot flash recovery openrecovery-twrp-2.8.3.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
Have you tried other version?
I believe you must use 2.8.0.0 and above for CM11.
Click to expand...
Click to collapse
Yes
Yes
I don't think so
clsA said:
When your recovery will not load like this the easy way to fix it is to reflash the current firmware on the phone again
this writes the stock recovery back to the phone and most times TWRP will work again after this
Click to expand...
Click to collapse
Yep, I already worked it out yesterday by flashing the stock recovery first via fastboot and then TWRP again.
But thanks anyway to everyone for contributing and trying to help
NotoriusBB said:
Yes
Yes
I don't think so
Click to expand...
Click to collapse
what is your "fastboot getvar all" ?
NotoriusBB said:
Already tried that after installing TWRP. Shall I do that before installing?
Edit: I tried fastboot erase cache now pre- and past-flashing TWRP 2.8.4.0.... nothing's changed
Click to expand...
Click to collapse
Try here
http://forum.xda-developers.com/showthread.php?t=2739126
yatindroid said:
Try here
http://forum.xda-developers.com/showthread.php?t=2739126
Click to expand...
Click to collapse
Thanks, I will take a look at it since I still only can install TWRP 2.6.3.3 and enter it, other versions won't start and 2.6.3.3 gives me an error every time I want to install a custom rom -.-
Edit: Doesn't work