Hi,
I want to build m7 dot view case.
Does anyone get the Dot view mode enabled without the case?
Gesendet von meinem HTC One mit Tapatalk
Good question, also I want to know how to enable dot view mode with or without case, magnet etc.
By the way, M7 doesn't have motion launcher, probably dot view gestures may not work...
Or can be fix with kernel...
HTC One cihazımdan Tapatalk kullanılarak gönderildi
midtowntr said:
Good question, also I want to know how to enable dot view mode with or without case, magnet etc.
By the way, M7 doesn't have motion launcher, probably dot view gestures may not work...
Or can be fix with kernel...
HTC One cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
It cannot be done, dot view requires hardware to activate the dot view, the gestures are controlled by the proximity sensors. This has been conformed on youtube reviews, I can remember who reviewed it but it is in one of the other threads on this very topic I have commented on.
It may be possible for a creative dev to make script to enable this to work through the sensors but I believe it would be very difficult to make it work because you would have loads of problems with getting the sensors to work effectively without triggering unwanted responses from the sensors, in addition who would make the dot view cases???
Jonnibravo said:
It cannot be done, dot view requires hardware to activate the dot view, the gestures are controlled by the proximity sensors. This has been conformed on youtube reviews, I can remember who reviewed it but it is in one of the other threads on this very topic I have commented on.
It may be possible for a creative dev to make script to enable this to work through the sensors but I believe it would be very difficult to make it work because you would have loads of problems with getting the sensors to work effectively without triggering unwanted responses from the sensors, in addition who would make the dot view cases???
Click to expand...
Click to collapse
It can be done with proximity sensor, just need a Chinese company to make the case in the correct plastic for the motion gestures.
Related
When I taking selfie from my OP3T
It getting background alfabets and objects
in reverse but it not same in Samsung and
Huawei devices why ?
It's for all OP3T or only in my OP3T?
It depends on whither or not your camera app supports frontcam mirroring. I'm using CameraNX from the Nexus phone and there's no option for mirroring there either.
There is default setting of mirroring in front camera. Just turn it off
Sent from my ONEPLUS A3010 using Tapatalk
CrayZee said:
There is default setting of mirroring in front camera. Just turn it off
Click to expand...
Click to collapse
Wow, I've never noticed that, after owning the phone for 4 months! Thanks for pointing that out. I don't take a lot of selfies, but do from time to time. And apparently, never (on this device) with any text on my clothes or in the background. Otherwise, I probably would have noticed.
To change the setting on the stock OOS camera, tap the 3-line menu icon on the top left of the screen, then the gear icon on the top right. Then deselect "Invert photo". Which is not that intuitively named. The wording makes me think it will flip the picture upside down! Calling it "Mirroring" as you said, would have made more sense.
Seems odd to have this enabled by default (the opposite of my past HTC and Samsung devices). It makes sense to mirror while taking the photo (most folks will probably find this more intuitive for lining up the camera, posing, etc.). But not so much sense to have the mirrored photo captured/saved.
@CrayZee & @redpoint73
Thanks.
pkdubai20 said:
When I taking selfie from my OP3T
It getting background alfabets and objects
in reverse but it not same in Samsung and
Huawei devices why ?
It's for all OP3T or only in my OP3T?
Click to expand...
Click to collapse
If u are in OOS stock ROM, there already the option to turn OFF the front camera effect, but in case u are in CUSTOM ROM (Where there is no Stock OOS Camera), one of the 3rd party camera that has the function of 'Front Camera Mirror ON/OFF' is the Open Camera app. U can get it at the PlayStore for free
Sent from my OnePlus 3T using XDA Labs
I put together this video since I was asked how I did it. Hope it helps.
https://youtu.be/FSLbzsrXDHQ
there is already edge light notification built in - if you can find a way for this to work only around the punch hole - please come back and let us know
tim2london said:
there is already edge light notification built in - if you can find a way for this to work only around the punch hole - please come back and let us know
Click to expand...
Click to collapse
Go to 5:10 there is an option where it will only go around the camera cut out.
I don't have a S10 so I can't try it, but it seems like it's working properly in the video.
tim2london said:
there is already edge light notification built in - if you can find a way for this to work only around the punch hole - please come back and let us know
Click to expand...
Click to collapse
Did you even watch the video before you made that comment? There's no way to do what the video shows with an out of the box s10 model.
Awesome, finally having a way to know I got a notification without checking the phone all the time and the light will stay until I see it. I will try when I get home, Thank you so much! hopefully it doesn't take too much battery having it just around the camera.
Can you have it so the light only shows around the cutout and not the whole screen? What does that look like?
MishaalRahman said:
Can you have it so the light only shows around the cutout and not the whole screen? What does that look like?
Click to expand...
Click to collapse
Yes, watch the video. I show that in there around the 5 min mark I think.
But this comes with a forced custom lockscreen right?
Dont want to have that.
Gesendet von meinem SM-G973F mit Tapatalk
EVOme said:
Did you even watch the video before you made that comment? There's no way to do what the video shows with an out of the box s10 model.
Click to expand...
Click to collapse
yes i watched the video i just dont know why it looks so wierd
cant you just film the actual phone
atm it looks like something someone made up in photoshop
i see a ring notification but is not clear if its not croped from another video and pasted over or what
show the video with the actual phone not the simulated screen
xPr0metheus said:
But this comes with a forced custom lockscreen right?
Dont want to have that.
Gesendet von meinem SM-G973F mit Tapatalk
Click to expand...
Click to collapse
Agree, wish this functionality was built-in by Samsung, rather than the security liabilities of the 3rd party app permissions.
tim2london said:
yes i watched the video i just dont know why it looks so wierd
cant you just film the actual phone
atm it looks like something someone made up in photoshop
i see a ring notification but is not clear if its not croped from another video and pasted over or what
show the video with the actual phone not the simulated screen
Click to expand...
Click to collapse
It's not a simulated screen. It's my actual S10 and I'm doing a screen record. You won't get any clearer view that that or the other video on my channel
This...
https://youtu.be/l0Cef7OrFXs
Sent from my SM-G973U using Tapatalk
xPr0metheus said:
But this comes with a forced custom lockscreen right?
Dont want to have that.
Click to expand...
Click to collapse
No, it does not! You maintain the OEM lockscreen. Nothing changes on your phone except you now get a notification light like I showed...either way.
Either this way
https://www.youtube.com/watch?v=vOU_znFC_gk
or this way
https://www.youtube.com/watch?v=l0Cef7OrFXs
xPr0metheus said:
But this comes with a forced custom lockscreen right?
Dont want to have that.
Gesendet von meinem SM-G973F mit Tapatalk
Click to expand...
Click to collapse
I would be nice if the camera edge lighting just works without having to switch to another "lockscreen". I like the native always on display. If the camera edge lighting just works with that then it would be even better.
Edit: Hmm just saw EVOme's reply above. Going to check that out!
Edit 2: So it looks like it still switched to another screen when camera edge lighting poped up. What I was talking about is just have the lighting show up while keeping it at always on display.
downloaded it to see if worked without AOD on and couldn't get the notifications permissions to stick. I gave up and uninstalled it.
It comes with its own AoD - uninstalled
He wants you to watch ads or buy to save settings - uninstalled x 2
Gesendet von meinem SM-G973F mit Tapatalk
I'm uploading another video really quick for you all that can't picture what's happening.
Watch this video...
https://www.youtube.com/watch?v=B-WGs1DwQDA
Genuinely cant see why this is any better than edge lighting
Led lights have is a permanent light so you could see you had a notification, and also read for charging and green for fully charged
Why is just pushing edge lighting into the camera cut out being called led notifications? It just seems to me it should be called 'add on to edge lighting '
Unless we get a permanent led light then it's not led notifications as we all know it to be
Sent from my SM-G975F using Tapatalk
Davey Dual Sim said:
Genuinely cant see why this is any better than edge lighting
Led lights have is a permanent light so you could see you had a notification, and also read for charging and green for fully charged
Why is just pushing edge lighting into the camera cut out being called led notifications? It just seems to me it should be called 'add on to edge lighting '
Unless we get a permanent led light then it's not led notifications as we all know it to be
Sent from my SM-G975F using Tapatalk
Click to expand...
Click to collapse
Call it whatever you want. We currently do not have the option without using a 3rd party app. Edge lighting is mediocre at best IF you can even get it working. Would a Samsung solution be better, absolutely, but it's not there.
So why is the camera cut out any different to the edge lighting, or the notification lighting up?
The camera cut out lighting up then going off is not the same as an led staying on, sorry just don't get it.
Sent from my SM-G975F using Tapatalk
https://blog.tmyt.jp/entry/2019/12/13/225204
This works on all apps
https://play.google.com/store/apps/details?id=net.refy.android.g8x.widemode
This is seriously very impressive. Nice work, only issue is it breaks the navigation bar and won't come back regardless if changing between gestures or normal navbar. Only fix is a reboot.
It does crash frequently inside an app.
kalinskym said:
It does crash frequently inside an app.
Click to expand...
Click to collapse
Could you provide some information of your device?
* Android Version
* ro.product.vendor.device
* Files inside `/system/framework`
tmyt said:
Could you provide some information of your device?
* Android Version
* ro.product.vendor.device
* Files inside `/system/framework`
Click to expand...
Click to collapse
hi, are you the developer of this awesome wide mode enabler?
If so, is it possible to enable dual screen working when folded completely (360 deg) same as lg g8X. i guess screen turns off when the magnetic latch (hall sensor) detected.
Also, possible to turn on dualscreen, switch/swap between screens, through tasker integration? disabling on-screen buttons
shameemindia said:
hi, are you the developer of this awesome wide mode enabler?
If so, is it possible to enable dual screen working when folded completely (360 deg) same as lg g8X. i guess screen turns off when the magnetic latch (hall sensor) detected.
Also, possible to turn on dualscreen, switch/swap between screens, through tasker integration? disabling on-screen buttons
Click to expand...
Click to collapse
Yes, thank you using!
- May not possibe to enable dual screen while 360 deg. Framework checks cover state internally, ignore power on message when cover fully opened.
- Turn On or Off dualscreen through tasker integration is possible.
- Switch or Swap screen can use only activities from same package if non privileged apps. Could not possible Switch/Swap from Tasker integration.
tmyt said:
Yes, thank you using!
- May not possibe to enable dual screen while 360 deg. Framework checks cover state internally, ignore power on message when cover fully opened.
- Turn On or Off dualscreen through tasker integration is possible.
- Switch or Swap screen can use only activities from same package if non privileged apps. Could not possible Switch/Swap from Tasker integration.
Click to expand...
Click to collapse
Is it optimized for dual notch in wideview?
This app is wonderful! It works for my LG v50, but I have one problem, the wide mode screen is smaller than my phone's screen, leaving black borders. Is there any way to fix this?
Sorry I mean when it crashes in app its due to say keyboard opening, or clicking on a link. I don't think it's to do with the app, just which LG allows you to modify. Like, without root do you think its possible to have widemode on all time even when switching between apps or will we have to always open a widemode using the toggle. It be awesome if you could remap the activity to a button such as Google assistant button or include in floating menu LG has. Or swipes up from navigation bar.
harysviewty said:
Is it optimized for dual notch in wideview?
Click to expand...
Click to collapse
What mean the 'optimized' that are you expecting?
tmyt said:
What mean the 'optimized' that are you expecting?
Click to expand...
Click to collapse
The system is aware that there are two notch on each half of the top bar
Cpamazing said:
This app is wonderful! It works for my LG v50, but I have one problem, the wide mode screen is smaller than my phone's screen, leaving black borders. Is there any way to fix this?
Click to expand...
Click to collapse
Half full half empty glass problem. At least you still got this update
Poor design
harysviewty said:
Poor design
Click to expand...
Click to collapse
That's not what I meant. The app itself doesn't fully fit either the dual screen or the main screen, it's smaller than both. It leaves borders around the bottom of the dual screen and the right of the main screen, as if the app is too small to fit the display. Perhaps Android 10 will fix some of these issues.
Does anyone have the APK for this? I'm wanting to try it on the Asus ROG Phone II second screen attachment just to see if it might work, and can't find the apk anywhere, or get it to download.
Gc13psj said:
Does anyone have the APK for this? I'm wanting to try it on the Asus ROG Phone II second screen attachment just to see if it might work, and can't find the apk anywhere, or get it to download.
Click to expand...
Click to collapse
No you cannot. Asus uses different developer kit for twindock. LG & Asus apps aren't cross compatible to each other. Asus dual screen games also didn't work the same on LG
And this app uses LG's own implementation (which is very new, not yet published in public for developers)
harysviewty said:
No you cannot. Asus uses different developer kit for twindock. LG & Asus apps aren't cross compatible to each other. Asus dual screen games also didn't work the same on LG
And this app uses LG's own implementation (which is very new, not yet published in public for developers)
Click to expand...
Click to collapse
That completely makes sense, but a shame. Thanks for getting back to me so quickly
Doesnt work on v50 pie. Just crashes.
snaske65 said:
Doesnt work on v50 pie. Just crashes.
Click to expand...
Click to collapse
I observed this problem from crash report, v50 pie has not API same as g8x.
I need system image of v50 pie to resolve this crash.
tmyt said:
I observed this problem from crash report, v50 pie has not API same as g8x.
I need system image of v50 pie to resolve this crash.
Click to expand...
Click to collapse
Even newer updated v50 with wideview mode?
Folks, I have what's like a Pixel dot right in the top middle of my screen. It sparkles like a far away star. Anyone else experience this? View attachment 5121461
Sent from my Pixel 5 using Tapatalk
17-apg said:
Folks, I have what's like a Pixel dot right in the top middle of my screen. It sparkles like a far away star. Anyone else experience this? View attachment 5121461
Sent from my Pixel 5 using Tapatalk
Click to expand...
Click to collapse
This light is the proximity sensor, it should appear only when in a call. If it's always appearing it's a software bug caused either by the way you restored data on your device, an app, or a system setting. Check here for more info: https://forum.xda-developers.com/pixel-5/help/flickering-dot-display-notification-t4176787
akpe said:
This light is the proximity sensor, it should appear only when in a call. If it's always appearing it's a software bug caused either by the way you restored data on your device, an app, or a system setting. Check here for more info: https://forum.xda-developers.com/pixel-5/help/flickering-dot-display-notification-t4176787
Click to expand...
Click to collapse
It really shouldn't be visible at all even when in active use. If you use the "Flip To Shhh" it's always on but you don't see it. However, if you point another camera at it you can see the flickering on the screen of the other device. I've been able to confirm that on my Pixel 2 XL. If I turn "Flip To Shhh" off then the flickering of the proximity sensor stops.
17-apg said:
Folks, I have what's like a Pixel dot right in the top middle of my screen. It sparkles like a far away star. Anyone else experience this? View attachment 5121461
Sent from my Pixel 5 using Tapatalk
Click to expand...
Click to collapse
Not a bad pixel. What @akpe said above was right.
See my post here:
https://forum.xda-developers.com/showpost.php?p=83763723&postcount=19
So it took me a couple of days but I developed a rear screen mirroring app called Mirror2RearUltra. It consists of a quick setting tile and nothing more.
Try it out for yourself, see what happens. I don't know how to squash the bugs but the source (and APK) is available on GitHub if anybody wants to take a peek.
Yes, it does mirror the display onto the rear display.
GitHub - tpkarras/Mirror2RearUltra: Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra.
Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra. - GitHub - tpkarras/Mirror2RearUltra: Rear screen mirroring plugin/app for Xiaomi Mi 11 Ultra.
github.com
Nothing happens when I start it. I see the headline, but the app interface is blank.
I'm not supposed if that's the expected behavior, but it doesn't seem to do anything regardless.
GuyWithRootedPhone said:
So it took me a couple of days but I developed a rear screen mirroring app called Mirror2RearUltra. It consists of a quick setting tile and nothing more.
Click to expand...
Click to collapse
Thank you.
But please specify which are the requirements:
- root ?
- Android version ?
- ROM ?
These info are not available also on your github repository.
munky-head said:
Nothing happens when I start it. I see the headline, but the app interface is blank.
I'm not supposed if that's the expected behavior, but it doesn't seem to do anything regardless.
Click to expand...
Click to collapse
you're supposed to start it from the quick tile.
themissionimpossible said:
Thank you.
But please specify which are the requirements:
- root ?
- Android version ?
- ROM ?
These info are not available also on your github repository.
Click to expand...
Click to collapse
it should be usable without root.
11 min (since that's what the Mi 11 Ultra) shipped with.
MIUI (developed with Xiaomi.eu) but should work with any MIUI version.
nasıl yükleyeceğimi anlamadım
I don't understand how to install it
frelinnn said:
I don't understand how to install it
Click to expand...
Click to collapse
release I uploaded didn't work, fixing it asap.
GuyWithRootedPhone said:
release I uploaded didn't work, fixing it asap.
Click to expand...
Click to collapse
and... fixed!
Great. Works a treat. Thank you.
@GuyWithRootedPhone I was just reviewing your code on github and as a casual android developer with no experience with this kind of thing (dealing with extra screens) it doesn't look TOO hard. I was wondering though, do you think it'd be possible to build an application that could read notifications and display them to the subscreen? I just absolutely hate that Xiaomi only allows it's default messaging and dialer app to display actual details to the subscreen. I love Google's implementation of Messenger and that's my preferred texting app, but with that as default, nothing appears like the Xiaomi messenger. Same situation with Google's dialer application.
If you have any ideas/tips you could throw my way, I'd be very interested in working on such an app that would allow selected applications to display their contents on the subscreen.
beta 2 is out... it takes methods from the subscreen app installed on the Mi 11 Ultra in an attempt to keep the screen on.
if anybody has any ideas or suggestions on how to keep the screen on full brightness without modifying the settings, that would be super helpful.
Release 1.0-beta2 · tpkarras/Mirror2RearUltra
added code to wake screen up upon launch/wake.
github.com
beta 3 is out, did some tweaks to get it to work on older devices.
if anybody can help me figure out how to keep the screen brightness on the rear display to max. I'd buy you a coffee, I'm struggling to figure out how this all works.
Release 1.0-beta3 · tpkarras/Mirror2RearUltra
Minor fixes. Fixed bug involving face down sensor.
github.com
This app isn't doing a thing
I actually had an idea about using rear screen as an input surface while gaming. For example you can map touches/swipes on rear screen onto an action/touch on front screen area and get another functionality. Your app is quite promising to start with. Thanks for this.
droidDHD said:
This app isn't doing a thing
Click to expand...
Click to collapse
can you logcat the app? i need to know if it's crashing or not.
Works fine on mine. Once installed, just swipe from the top, turn it on, click start now and when you tap rear screen to start, it shows main screen. Sorry can't take rear screenshot.
Rotation doesn't work.
Try put camera in video mode and you will end up upside down on rear display.
I would like this to work, because this is my missing feature from Android 12. That all camera options are seen in rear display.
I can't use android 12 and mui 13 because of one sim not able to do call forwarding.
Otherwise works, would be better if it was written in advance that you need to place it in quick launch.
不错 很好用
fixed the brightness to keep the screen bright at all times.
this is the final release, hoping it works for everybody.
Release 1.0-final · tpkarras/Mirror2RearUltra
includes fix to keep screen bright and prevent touch inputs.
github.com