[Q] Please help - bricked? - Verizon LG G2

I have been tearing my hair out for like six straight hours now... so first I started with completely stock 12B.
Here is what I did.
1) Root using ioroot method
2) Install TWRP using FreeGee (which I'm now reading caused this entire mess god damnit)
3) Go into TWRP and format data to get ready to flash stock rooted debloat
4) Accidentally format sdcard so I have to get my rom zip back onto my phone
5) adb push keeps failing because rom file is so big so i flash a smaller size AOSP rom which boots
6) MTP transfer my stock rom zip file to my phone
7) go back to TWRP, wipe everything again (except sdcard obviously) and flash the stock rom
8) stock rom hangs at boot logo for ~20 minutes so i force restart, try again three times
9) go back into TWRP, TWRP starts not flashing things and telling me I have a partition error
10) TWRP isn't working for me anymore so I try a revert back to stock (verizon .tot) method posted here using LG Flash Tool
11) Fails twice
12) Phone has no more TWRP and only download mode
My questions
1) Is this phone totally screwed because it is the replacement I just got for my old one and I can't even unroot it to get another replacement (using manufacturer warranty, no verizon warranty)
2) Is there a way to get back to clean slate stock or even flash anything (TWRP, etc.) with only download mode available
I cannot function without my phone and I am very stressed right now somebody please help
EDIT: tried doing reset to stock KDZ method and it passed but when i reboot the phone i'm still stuck with only download mode, no recovery, and nothing past the LG logo. still the same....
turn on phone, see LG logo, immediately see download mode. now at least the LG logo doesn't hang but now it's the download mode,.

wm388 said:
I have been tearing my hair out for like six straight hours now... so first I started with completely stock 12B.
Here is what I did.
1) Root using ioroot method
2) Install TWRP using FreeGee (which I'm now reading caused this entire mess god damnit)
3) Go into TWRP and format data to get ready to flash stock rooted debloat
4) Accidentally format sdcard so I have to get my rom zip back onto my phone
5) adb push keeps failing because rom file is so big so i flash a smaller size AOSP rom which boots
6) MTP transfer my stock rom zip file to my phone
7) go back to TWRP, wipe everything again (except sdcard obviously) and flash the stock rom
8) stock rom hangs at boot logo for ~20 minutes so i force restart, try again three times
9) go back into TWRP, TWRP starts not flashing things and telling me I have a partition error
10) TWRP isn't working for me anymore so I try a revert back to stock (verizon .tot) method posted here using LG Flash Tool
11) Fails twice
12) Phone has no more TWRP and only download mode
My questions
1) Is this phone totally screwed because it is the replacement I just got for my old one and I can't even unroot it to get another replacement (using manufacturer warranty, no verizon warranty)
2) Is there a way to get back to clean slate stock or even flash anything (TWRP, etc.) with only download mode available
I cannot function without my phone and I am very stressed right now somebody please help
EDIT: tried doing reset to stock KDZ method and it passed but when i reboot the phone i'm still stuck with only download mode, no recovery, and nothing past the LG logo. still the same....
turn on phone, see LG logo, immediately see download mode. now at least the LG logo doesn't hang but now it's the download mode,.
Click to expand...
Click to collapse
1) Probably not
2) Yes, using the method you've attempted already. Make sure you validate your download and follow all the steps carefully in the guide.

BladeRunner said:
1) Probably not
2) Yes, using the method you've attempted already. Make sure you validate your download and follow all the steps carefully in the guide.
Click to expand...
Click to collapse
I've repeated carefully with multiple downloads, but I deduce I have the following problems.
1) Partition error with TWRP caused by FreeGee and probably deleting my /sdcard/ partition or something idk
2) My attempts at returning to stock have removed TWRP in place of download mode for some reason so I can't do recovery
3) Something is wrong with download mode because it's not being effective in the .tot or .kdz return to stock methods
4) I don't even know what's going on anymore I'll sleep on it and come back tomorrow
thanks for the quick response. I think I'll just see if i can pin this on the replacement guys and get a replacement.

wm388 said:
I've repeated carefully with multiple downloads, but I deduce I have the following problems.
1) Partition error with TWRP caused by FreeGee and probably deleting my /sdcard/ partition or something idk
2) My attempts at returning to stock have removed TWRP in place of download mode for some reason so I can't do recovery
3) Something is wrong with download mode because it's not being effective in the .tot or .kdz return to stock methods
4) I don't even know what's going on anymore I'll sleep on it and come back tomorrow
thanks for the quick response. I think I'll just see if i can pin this on the replacement guys and get a replacement.
Click to expand...
Click to collapse
After you used the lg flash tool did you do a factory reset?
Sent from my VS980 4G

Lawlrus said:
After you used the lg flash tool did you do a factory reset?
Sent from my VS980 4G
Click to expand...
Click to collapse
I can't do a factory reset because I can't get into TWRP / the page that says hit power three times to do a factory reset now leads to download mode instead of teamwin splash

wm388 said:
I can't do a factory reset because I can't get into TWRP / the page that says hit power three times to do a factory reset now leads to download mode instead of teamwin splash
Click to expand...
Click to collapse
Then the flash tool didn't take. I've used it three times now and after the flash says its successful, you take the USB out of the phone and use the hardware keys to factory reset.
Instead of going to twrp as it usually does, it actually does the factory reset. If you don't do that then it bootloops till you do. The flash tool doesn't remove everything to make it factory stock.
Sent from my VS980 4G

Lawlrus said:
Then the flash tool didn't take. I've used it three times now and after the flash says its successful, you take the USB out of the phone and use the hardware keys to factory reset.
Instead of going to twrp as it usually does, it actually does the factory reset. If you don't do that then it bootloops till you do. The flash tool doesn't remove everything to make it factory stock.
Sent from my VS980 4G
Click to expand...
Click to collapse
hitting the three power buttons leads to download, not TWRP like before. Also, using LG Flash Tool reults in "LAF Property setting failed"
thank you for your help

wm388 said:
hitting the three power buttons leads to download, not TWRP like before. Also, using LG Flash Tool reults in "LAF Property setting failed"
thank you for your help
Click to expand...
Click to collapse
I doesn't seem like you're pressing the right button combo to get into the Factory hard reset menu.
Do this:
1) Power the phone off completely (press and hold the power button until the phone shuts off).
2) Press and hold the power and volume down buttons at the same time.
3) When the LG logo comes up on the screen, let go of the power and volume down buttons, then press the power and volume down buttons at the same time again until the Factory hard reset menu comes on the screen.
4) Once in the Factory hard reset menu, press the power button twice to factory reset the phone.
If you already knew this, then I apologize.

bouchigo said:
I doesn't seem like you're pressing the right button combo to get into the Factory hard reset menu.
Do this:
1) Power the phone off completely (press and hold the power button until the phone shuts off).
2) Press and hold the power and volume down buttons at the same time.
3) When the LG logo comes up on the screen, let go of the power and volume down buttons, then press the power and volume down buttons at the same time again until the Factory hard reset menu comes on the screen.
4) Once in the Factory hard reset menu, press the power button twice to factory reset the phone.
If you already knew this, then I apologize.
Click to expand...
Click to collapse
Yeah, when I do that I get the download mode "firmware update" screen. previously it would lead to TWRP, but now it leads to firmware update screen.
ty

New update: I finally got 11A .tot to flash, but booting it was really unstable, kept rebooting / blank screen of death like every time I tried to get in. Finally became slightly more stable when I took the SIM card out, used WiFi to download 12B update using OTA. Installed OTA and now it's hanging at the "Updating software 2/2" page at 35% (the page with the beautiful picture of the lush green grass and the blue sky). I'm just going to leave it for a night plugged into the wall and see where it goes, maybe it's frozen, maybe it's not.
Probably it is. In which case I'll probably have to force reboot and I'll wake up to a host of new problems.

Related

[q] galaxy s tweak app froze my phone

my phone has been frozen at the samsung i9000 screen ever since opening this app.... i am very new to this do not understand most concepts here.. ie. flashing a rom. If anyone can help me get my phone out of this state or has any suggestions on how i should fix this please comment.
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
krtken said:
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
Click to expand...
Click to collapse
i can get in recpvery and download mode but have no clue really how to flash a rom.. i have odin and a few otehr files but i cannot get this back to normal.
Tehpriest said:
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
Click to expand...
Click to collapse
the app is galaxy s tweaks or something very simalar (black and white logo) the two options i was given in the app were "YES-BREAAAAK my phone" and "NO- Im not crazy" i selected no and then my phone just reset and wouldnt turn on again ive tried everything i can do without hooking up to a comp ( as far as i know) but thx for the advice
Where did you get this from? It does not seem to be in the market.
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Tehpriest said:
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Click to expand...
Click to collapse
Is telling me i need recovery code, I have never received one.
Just read this so it may work for you.
disconnect the phone from USB, pull the battery, replace it, boot into recovery mode and reconnect the phone. Go back to Kies and tools firmware recovery.
In other words repeat what you have done :-s
Original post on Android Forums.
The message indicated that I would need a recovery code that could be obtained later by clicking Tools | Firmware Emergency Recovery Menu.
I was then instructed to disconnect the phone, pull the battery, boot into recovery mode and reconnect the phone which I did. The phone would not reconnect. At this point I called Samsung tech support and wasn't impressed when I was simply told to repeat the procedure. But to my surprise, the upgrade was successful the second time around. Go figure! Anyway, I was wondering if anyone else ran into the recovery code message.
Click to expand...
Click to collapse

[Q] Did I brick my SGS BT-I9000?

I Have a similar problem as posted by someone else - but I can't reply in that thread yet so here it is:
Also SGS GT-I9000 - now stuck on white logo screen.
What I have done:
- phone was slow and very laggy so I wanted to install new ROM
- found out that 3bc didn't work so tried to fix that using a guide from SamsungGalaxySforums based on one from XDA (tried to post the link, but forum rules won't let me).
- now download mode works but recovery mode still doesn't.
- when rebooting without being attached to laptop it showed funny coloured lines first
- I tried this whole thing again and now my phone is stuck on white logo screen. Still able to get into download mode and flash, but no booting phone.
Any ideas? Should I flash a different bootloader?
EDIT: I had tried the Aries_P-SBL.tar.md5 bootloader and only got coloured lines.
Now using the EZboot-GingerBread-1.0.tar.md5 bootloader and getting a bootloader screen. Now making a backup of all my data first.
EDIT: After backup still hangs at white Galaxy S screen - so still no working phone! Ideas?
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
dhiru1602 said:
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
Click to expand...
Click to collapse
It says in his post, recovery wont work, only download.
Sounds to me he has screwed up the bootloader.
Now you've done this http://forum.xda-developers.com/showthread.php?t=1089989
I now suggest you boot to download and flash a stock rom using ODIN.
just flash stock Rom using Odin and than you can flash what you want

[A] Soft bricks, blocked recovery, bootloops - RESCUE TIPS

Ok, so there are a lot of threads about soft bricks and bootloops, I have answered in a lot of threads but it seems it needs separate thread to explain how to "revive" your phone from bootloops and soft bricks.
First of all, I don't guarantee that it will work but mostly this tricks do their job.
Tricks were tested and worked on many phones, but I don't take responsibility for hard bricked phones after performing tricks from this thread.
Sometimes you need to repeat process because everything must be done with perfect timing. Also if one method won't work try another.
1. Prepare your phone to press recovery combination and while plugging phone to USB or charger, hold keys and release when samsung logo appear. Do Factory reset in recovery
2. (the best) turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery
(3). Emergency download mode (when phone wib but don't turn on screen) - take off battery for few minutes, after that time hold download combination and insert battery, wait few seconds (so normally it would boot and enter dm), accept terms by pressing volume down, connect USB and flash stock Rom
4. usefull tip - Always have backup created in CWM on phone, you never know when it will be needed. What I do is creating backup every week/two weeks, also I have stock backup. I really recomend to create backup before flashing CM while you are on stock (it will guarantee everything will 100% work if something fails), it helped me a lot of times.
(recovery combination - volume up, volume down, power, home)
(download mode - volume down, home, power / accept terms volume down, decline - volume up)
In 1 and 2 "just in case" you can flash stock Rom, when it will start to reboot after Odin finish flashing, take off battery and insert again (to stop boot process) phone should boot into recovery normally but repeat point 2 to be sure.
Also, what is importiant, ALWAYS have turned on debug mode in your usb settings, first thing you should do after flashing CM, turn on debug mode.
===================================================================================================================================================
When you are switching from CM to stock, after flashing stock you will have almost 100% chance that you will have bootloop on samsung logo. You have to factory reset before first boot. So, after flashing stock, when odin will proceed reboot your phone, unplug phone and take off battery (take off battery cover before flashing, but be careful not to drop battery while flashing via odin, it would be really really bad for your phone, hold phone and battery all the time). After inserting battery back and assemble cover, go to recovery and do factory reset.
Share your thoughts and experience here.
Bump
You should contact a moderator and ask him/her to pin this thread.
help please
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:
yudha wira said:
my phone cannot go to the recovery mode although i had flash the stock rom
and my phone had a bootloop
may you help me :crying:
Click to expand...
Click to collapse
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me
Peky031 said:
"turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery" learn to read...
this is worked for me
Click to expand...
Click to collapse
I had this problem. Reflash CWM. Then "turn on phone into download mode and don't accept terms, when phone will reboot quick hold recovery combination and release when samsung logo appear. Do Factory reset in recovery"
Thanx man it worked. Several attemps in 2 days.
Verzonden vanaf mijn GT-S6500D met behulp van Tapatalk now Free
Thank you for this ! The decline download mode agrements , press recovery combination trick worked , I managed to get to recovery ! I flashed stock rom 3 times and tried repartition with pit ...but this is the only thing that worked ! Thank you
Now I have a Idea about a Un-brick:
1. If you want to return (after a Forget a clean data/cache/dalvik) When You can downgrade with .md5 Stock ROM (or Custom)
2. If Recovery Doesn't works... You can only Download Mode (Volume Down + Home + Power) - Remember it's that's not with SIM/SD Card [Maybe that's optional if it forget but I will be recommend.]
3. Flash to Newest "ClockWorldMod"
4. After Restart - That's must be take off battery and Connect USB Cable to SGMII
5. Let's Turn On Recovery Mode with a "Samsung Logo" Before Input Battery [With a Battery it's doesn't does it Start,on Fortunately...]
6. And... Let's to clean data/cache/dalvik... And that's All of "Open source Unbrick"
What Did a get:
+ Downgrade ROM without a Additonal Box (Because that's Open source with a Easy-Root and Not Close-Source as a Self of Old Sony Ericsson Tuning - But I Like a Old Sony Ericsson's Too ... And "Sony" looks from a 2007 about a Modifications and Sony is not a blocked for Android - Fortunately... And for a Today Some users remembers about a Big Seasons Tunings from K310i or K550i [I had a Two phones... That's nice what I discovered about a ROM's Modifications... And Let's praise for Sony that's Not blocked for Androids... Thank you,Sony. ]
+ That's can be again to Upgrade eg. Cyanogenmod
And... A knowledge... Hope that's share a help.
might want to consider adding this
Hi OP, you might want to add this to your thread..
so, early this week, i faced a bad bootloop situation after the software update.. Even with a normal boot (no vol+,home button and power button pressing), my phone will still be stucked at CWM recovery..
Note that my phone was working fine, only the software update caused my phone to stuck in the CWM bootloop..
So, what i did was, i updated my CWM 4.0.8.2 [ my bad, cause when i rooting my phone initially last few weeks, and i've been reading outdated threads].. So, i updated my CWM 4.0.8.2 to CWM 6.x through CWM recovery..
Then, after it rebooted, i go to download mode, connect my phone through ODIN and flashed stock rom.
Now, it is working fine like new..

[Q] Soft brick, I think? I don't know, but I messed up.

Here's what I did.
1) performed factory data wipe in TWRP
2) Installed all three .zip files, ROM, gapps, and lgapps, all said successful
3) dalvik/cache wipe
4) tried to boot.
When I try to boot my phone, I get the LG splash screen for a split second, then just a black screen. I cannot boot into recovery. I can get it into download mode by holding the power button, then waiting for the screen to go off, and holding volume up and plugging in the usb cable quickly before it goes to the lg splash screen. The problem is once I'm there, it goes to a "firmware update" screen which won't progress no matter how long I wait. My computer also won't correctly detect my phone. If in download mode, it won't detect it at all. If I just boot, it pulls up "local drive" E all the way to R and asks me to format each one. When I try to access E:, it tells me that the parameter is wrong. All the others simply ask to be formatted.
Please help. I probably shouldn't have messed with my phone in the first place. I thought I'd done it right, but I guess not
Xeno4494 said:
Here's what I did.
1) performed factory data wipe in TWRP
2) Installed all three .zip files, ROM, gapps, and lgapps, all said successful
3) dalvik/cache wipe
4) tried to boot.
When I try to boot my phone, I get the LG splash screen for a split second, then just a black screen. I cannot boot into recovery. I can get it into download mode by holding the power button, then waiting for the screen to go off, and holding volume up and plugging in the usb cable quickly before it goes to the lg splash screen. The problem is once I'm there, it goes to a "firmware update" screen which won't progress no matter how long I wait. My computer also won't correctly detect my phone. If in download mode, it won't detect it at all. If I just boot, it pulls up "local drive" E all the way to R and asks me to format each one. When I try to access E:, it tells me that the parameter is wrong. All the others simply ask to be formatted.
Please help. I probably shouldn't have messed with my phone in the first place. I thought I'd done it right, but I guess not
Click to expand...
Click to collapse
I might have the solution. You will need Ubuntu/ any other distribution that you want.
Try this, with these files.
Best of luck, hope you can fix this issue!
Xeno4494 said:
Here's what I did.
1) performed factory data wipe in TWRP
2) Installed all three .zip files, ROM, gapps, and lgapps, all said successful
3) dalvik/cache wipe
4) tried to boot.
When I try to boot my phone, I get the LG splash screen for a split second, then just a black screen. I cannot boot into recovery. I can get it into download mode by holding the power button, then waiting for the screen to go off, and holding volume up and plugging in the usb cable quickly before it goes to the lg splash screen. The problem is once I'm there, it goes to a "firmware update" screen which won't progress no matter how long I wait. My computer also won't correctly detect my phone. If in download mode, it won't detect it at all. If I just boot, it pulls up "local drive" E all the way to R and asks me to format each one. When I try to access E:, it tells me that the parameter is wrong. All the others simply ask to be formatted.
Please help. I probably shouldn't have messed with my phone in the first place. I thought I'd done it right, but I guess not
Click to expand...
Click to collapse
When you're in download mode, of course it won't progress because it's waiting for you to push an update.
You can use the lg flash tool to. Tot back to 11a from download mode.
However, I had a similar issue as yours and after asking more questions I was able to get back to recovery. The button sequence is tricky when you can't power your phone all the way off, but it can be done. Keep trying or just tot back from download mode.
Sent from my VS980 4G using Tapatalk

[Q] Volume Down Plus Power Method Won't enter Recovery

So, just updated with Malladus to 4.4.2 on Malladus 2.0.2, everything is fine with phone and running good. I did the unroot and then re root method. And now that I have malladus, I can boot into recovery. So technically I do not have any issues that are messing up my phone per se. But the thing is, the booting into the recovery the way it should work, with the phone off and then power and holding volume, letting go, and then re engaging with LG Logo appears does not get me into recovery. It did not before I even flashed Malladus, so I know it is not that. I got into recovery only because of flashify, and I was able to boot into. But shouldn't the volume down plus power method work? I can't figure out the reason it is not...Anyone know?
firestonebeer said:
So, just updated with Malladus to 4.4.2 on Malladus 2.0.2, everything is fine with phone and running good. I did the unroot and then re root method. And now that I have malladus, I can boot into recovery. So technically I do not have any issues that are messing up my phone per se. But the thing is, the booting into the recovery the way it should work, with the phone off and then power and holding volume, letting go, and then re engaging with LG Logo appears does not get me into recovery. It did not before I even flashed Malladus, so I know it is not that. I got into recovery only because of flashify, and I was able to boot into. But shouldn't the volume down plus power method work? I can't figure out the reason it is not...Anyone know?
Click to expand...
Click to collapse
The power on/volume down method takes you to a screen to do a factory reset, follow the instructions on the screen and it will take you to your recovery if you have one installed. Don't if you're on stock recovery cause you'll just wipe your phone.
hardware keys to enter recovery. volddown+power then volup+power
mjones73 said:
The power on/volume down method takes you to a screen to do a factory reset, follow the instructions on the screen and it will take you to your recovery if you have one installed. Don't if you're on stock recovery cause you'll just wipe your phone.
Click to expand...
Click to collapse
steps to enter recovery that worked for my Sprint LG G2 on ZVC firmware.
1) hold power and vol down till you see LG logo -- immediately release these buttons and
2) immediately hold power and vol up button to enter into factory reset menu.
Then 3 presses of power key to confirm wipe and enter TWRP recovery.
I was going mad trying to enter recovery. It appears like different models/software versions have different key combinations for entering recovery mode.

Categories

Resources