Hi guys! Can't launch my phone after bad flashing.
SDcard on phone is empty. Have read the forum, tried to flash using adb (push to sdcard, sideload), fastboot (rebootRUU). Tried diffrent recoveries, now have CWM 6.0.46 installed. I tried install ~5 diffrent ROMs. Usually i have no errors when installing but still can't launch phone. (Still endless load logo)
1. Recovery shows only 1795mb free spase (is it ok?)
2. When trying to type "fastboot erase *" commands have an error: failed <remote not allowed>
3. While installing Renovate SixthSense it gives me an error symlink:some symlinks failed on Toolbox step.
What shoud i do?
Output of fastboot getvar all?
sent from my mobile device
SaHiLzZ said:
Output of fastboot getvar all?
Click to expand...
Click to collapse
Here:
Code:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA349S900672
(bootloader) imei: 990001465442622
(bootloader) meid: 99000146544262
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4303mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
MoHcmp said:
Hi guys! Can't launch my phone after bad flashing.
SDcard on phone is empty. Have read the forum, tried to flash using adb (push to sdcard, sideload), fastboot (rebootRUU). Tried diffrent recoveries, now have CWM 6.0.46 installed. I tried install ~5 diffrent ROMs. Usually i have no errors when installing but still can't launch phone. (Still endless load logo)
1. Recovery shows only 1795mb free spase (is it ok?)
2. When trying to type "fastboot erase *" commands have an error: failed <remote not allowed>
3. While installing Renovate SixthSense it gives me an error symlink:some symlinks failed on Toolbox step.
What shoud i do?
Click to expand...
Click to collapse
just push a rom you dowloaded to your phone
open command prompt an write
adb push ROM.zip /sdcard/.
or perhaps this thread can help you
http://android-revolution-hd.blogspot.com/2013/12/ow-to-use-adb-sideload.html
or
http://android-revolution-hd.blogspot.com/2013/12/how-to-copy-rom-zip.html
What the heck are you doing here with a sprint HTC One but WWE edition firmware. OH you are so screwed...
sent from my mobile device
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
Luckily you are S-OFF. Please do not lock bootloader or go s-on. Just flash a SPRINT ruu!
sent from my mobile device
SaHiLzZ said:
Luckily you are S-OFF. Please do not lock bootloader or go s-on. Just flash a SPRINT ruu!
sent from my mobile device
Click to expand...
Click to collapse
Thanks a lot! But there one trouble left. It start workin, all warks goot exclude htc dialer. And phone rebooting each 5-10 minutes.
I didn't flash sprint firmware. Do i need to flash it?
SaHiLzZ said:
What the heck are you doing here with a sprint HTC One but WWE edition firmware. OH you are so screwed...
sent from my mobile device
---------- Post added at 11:11 PM ---------- Previous post was at 11:10 PM ----------
Luckily you are S-OFF. Please do not lock bootloader or go s-on. Just flash a SPRINT ruu!
sent from my mobile device
Click to expand...
Click to collapse
where have you been?? you're missing all the ** flying around!! I even got my umbrella out!
MoHcmp said:
Thanks a lot! But there one trouble left. It start workin, all warks goot exclude htc dialer. And phone rebooting each 5-10 minutes.
I didn't flash sprint firmware. Do i need to flash it?
Click to expand...
Click to collapse
OP, nice screenshot, are you saying you have a Sprint M7 with HTC Sense 6?
"htc dialer. And phone rebooting each 5-10" means you're modem is not in the best of states!! so use an RUU for your model, and hope it brings it back to life!!
nkk71 said:
OP, nice screenshot, are you saying you have a Sprint M7 with HTC Sense 6?
Click to expand...
Click to collapse
I tried this one: Bad Boyz Sprint ONE ROMz | 4.4.2 | Sense 6 | Deodexed | myHUB
What shoud i install:
1) [ROM][STOCK]Sprint One Stock 3.04.651.2 Rooted | Odex | Deodexed
2) [Roms][ SPRINT ONE] Stock Rooted 3.05.651.6 - Odex & Deodexed
3) Eciptic One
nkk71 said:
OP, nice screenshot, are you saying you have a Sprint M7 with HTC Sense 6?
"htc dialer. And phone rebooting each 5-10" means you're modem is not in the best of states!! so use an RUU for your model, and hope it brings it back to life!!
Click to expand...
Click to collapse
All of this was because of wrong Radio. If someone have same trouble, just flash radio for your device.
Related
Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
So here is my fix..
I flashed a bone stock rom with no root found here... or restore nandroid. I usually make a nandroid backup before i flash su.zip. but anyway, after the restore i booted into the bootloader and types fastboot oem lock. then i proceeded to reboot, but my device kept booting into bootloader. i tried fastboot erase cache which didn't help. so i grabbed the firmware from this thread http://forum.xda-developers.com/showthread.php?t=2368907 . In the bootloader type...
fastboot oem reboot RUU
now you should be in a black screen with the htc logo
fastboot flash zip /navigate/to/zip/file
you will get fail the first time(pre-hboot update: please flush immediately)
just make sure your device is still in the RUU mode(black screen with htc logo, if not redo first step)
fastboot flash zip /navigate/to/zip/file
it should proceed to flash and get flash successful!
oh you might get a loading bar underneath the htc logo. this is normal. just make sure that in the terminal it said successful.
unplug and hold the power till it restarts.
now you are bone stock with stock recovery. this is the closest I've came to being stock since there currently isn't a RUU tool for the latest firmware. hope this helps. BIG THANKS TO bigdaddy619 for the input!
Techno Droid said:
Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
Click to expand...
Click to collapse
s-off should let you ruu any image
Techno Droid said:
Ok, so im new here to the htc forums but not the rooting community. I previously had all nexus devices and this is my first htc/one device. I dont understand what image version im on bc when i look under Settings>About>Software Info I see Software Version - 1.29.651.10. So Why is that i cant run this RUU without any problems? Im using this guide... http://forum.xda-developers.com/showthread.php?t=2250904
I Keep getting an error at the end. heres what i did
First i flashed this.... Sprint_HTC_One_1.29.651.10_Stock_Deodexed.zip
Second... fastboot oem lock (from bootloader screen)
Third... Ran the setup.exe from this this Sprint_HTC_One_m7wls_1.29.651.10_RUU.zip
Fourth... i accepted the terms but my image version said 1.31.651.2. the image version didnt match when i ran the RUU.
at the end i get the error code 140. im posting some images so you guy can see.
in the bootloader screen i did: fastboot getvar all and got this
Last login: Tue Aug 13 21:11:14 on ttys000
MacBook-Pro:~ AbeVilla$ fastboot devices
FA35SS902798 fastboot
MacBook-Pro:~ AbeVilla$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 1.00.20.0626
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.651.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35SS902798
(bootloader) imei: 990001468472873
(bootloader) meid: 99000146847287
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4043mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
ERROR: usb_read failed with status e00002e8
getvar:all FAILED (status read failed (No such file or directory))
finished. total time: 0.042s
so im am assuming that im flashed to this version of 1.29.651.10 android so to speak, but my actual image version is1.31.651.2? if i am understanding this correctly, that means i could flash any version i want but my actual bootloader is set on this1.31.651.2. So the RUU im using will not work until there is an updated version of the RUU, right? what if i was s-off? im currently s-on. would i be able to flash it back to stock if i was s-off and the image versions didnt match in the RUU? This is my first Htc devices and im felling kinda noobish.. please help.
Click to expand...
Click to collapse
The Software Version - 1.29.651.10 refers to the software version of the rom you are running if you were to flash a rom based on 1.31.651.2 your software version in settings would reflect that.
Since you are s-on your phone most likely came with 1.31.651.2 why are you trying to go backwards? If you just want to go back to stock there is a stock 1.31.651.2 rom(rooted and unrooted) in Indirects thread.
bigdaddy619 said:
The Software Version - 1.29.651.10 refers to the software version of the rom you are running if you were to flash a rom based on 1.31.651.2 your software version in settings would reflect that.
Since you are s-on your phone most likely came with 1.31.651.2 why are you trying to go backwards? If you just want to go back to stock there is a stock 1.31.651.2 rom(rooted and unrooted) in Indirects thread.
Click to expand...
Click to collapse
BC I need to send it back to sprint and plus in want to learn the process so I know exactly what im doing. Is there and ruu for the version my boot loader reflects?
Sent from my One using Tapatalk 2
Techno Droid said:
BC I need to send it back to sprint and plus in want to learn the process so I know exactly what im doing. Is there and ruu for the version my boot loader reflects?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
There is not an RUU for 1.31.651.2
I would suggest unlocking again
flash twrp 2.5.0.0
flash the Stock(no root) 1.31 rom in Indirect's thread
then relock again(your bootloader will say RE-LOCKED not LOCKED)
I kinda figured that I just had a brain fart about it. But when I flash a stock rom and relock bootloader it won't boot up I just keep booting into the bootloader. So if in was on an earlier version of 1.29.651.10 I would be able to relock and be stock, right?
Sent from my One using Tapatalk 2
Techno Droid said:
I kinda figured that I just had a brain fart about it. But when I flash a stock rom and relock bootloader it won't boot up I just keep booting into the bootloader. So if in was on an earlier version of 1.29.651.10 I would be able to relock and be stock, right?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
Did you check the MD5 on the stock rom you were trying to flash maybe it was a bad download?
In was on it running and all. Then I proceeded and relocked. Or did I do something wrong here?
Sent from my One using Tapatalk 2
Techno Droid said:
In was on it running and all. Then I proceeded and relocked. Or did I do something wrong here?
Sent from my One using Tapatalk 2
Click to expand...
Click to collapse
Check PM
Same Issue As Techno Droid - ! SOS ! - 7 day old brick
Hi all,
I'm hoping someone can assist me here, its been a week now without my phone due to my botched attempts to flash a custom rom. I have the exact same situation as TechnoDroid's initial post, and same exact fails. I tried Techno Droids fix, but am getting the following error from this command:
fastboot oem reboot RUU
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.001s]
finished. total time: 0.003s.
I've flashed the 1.31 stock ROM from Indirect's thread, and re-locked the bootloader, but I always get an OS that has no apps and begins a system boot loop after a few minutes.
Also, if I can find a compatible nandroid backup and flash it through TWRP would that be a possible fix?
Any help is greatly appreciated, I'll be looking into purchasing a backup phone from my MVNA, but would really like to unbrick this one since I paid full boat for an unlocked version!
- cheers
dancesWitShoes said:
Hi all,
I'm hoping someone can assist me here, its been a week now without my phone due to my botched attempts to flash a custom rom. I have the exact same situation as TechnoDroid's initial post, and same exact fails. I tried Techno Droids fix, but am getting the following error from this command:
fastboot oem reboot RUU
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.001s]
finished. total time: 0.003s.
I've flashed the 1.31 stock ROM from Indirect's thread, and re-locked the bootloader, but I always get an OS that has no apps and begins a system boot loop after a few minutes.
Also, if I can find a compatible nandroid backup and flash it through TWRP would that be a possible fix?
Any help is greatly appreciated, I'll be looking into purchasing a backup phone from my MVNA, but would really like to unbrick this one since I paid full boat for an unlocked version!
- cheers
Click to expand...
Click to collapse
Check PM
BD619 said:
Check PM
Click to expand...
Click to collapse
having the same issue: stock deodexed flashed but unable to get ruu,, tsk (Sprint HTC One 1.29.651.10!)
pls help,,
hi guys, I am stuck in boot mode after removing cyanogen mod, I have tried installing the RUU.exe but it will not complete - I think the reason for this is that S-ON. I can't seem to find a solution to achieve S-off anywhere without having to be into the phones OS.
I have tried pushing the rom to my phone but I just keep getting 'no device found'
The usb recognises the phone but the adb commands do not work at all
any further info suggested would be massively appreciated.
edit:
got adb commands working by following this guide
(not allowed to post links yet)
progress so far:
I have managed to sideload a relevant ROM but it has now been saying 'installing update' for quite a while and I am not sure whether to touch it
on another note, the image verification thing on this forum is very, very annoying.
ok so I sideloaded a ROM and it aborted the installation, totally at a loss now
grantymc said:
ok so I sideloaded a ROM and it aborted the installation, totally at a loss now
Click to expand...
Click to collapse
Boot your phone in bootloader mode and type fastboot getvar all. copy/paste the output here except IMEI and SERIALNO. Also, I need to know what recovery you are using and its version and what custom rom and its version you are trying to flash.
alray said:
Boot your phone in bootloader mode and type fastboot getvar all. copy/paste the output here except IMEI and SERIALNO. Also, I need to know what recovery you are using and its version and what custom rom and its version you are trying to flash.
Click to expand...
Click to collapse
I am using clockwork recovery, I was trying to flash a stock RUU zip - I could not find one to match my exact baseband version so I tried
"RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.zip" but just got the message 'installation aborted' after sideloading
forgive me I can't paste links yet
I also tried the latest version of CM as this is what I was trying to revert back from this installed but just said 'installing' for nearly an hour then after I rebooted it left with a constant CM loading screen
I have a feeling I need S-OFF but can't seem to achieve through any of the methods described
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.61.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA385W914634
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4325mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b0a25cb2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
grantymc said:
I am using clockwork recovery, I was trying to flash a stock RUU zip - I could not find one to match my exact baseband version so I tried
"RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4.zip" but just got the message 'installation aborted' after sideloading
Click to expand...
Click to collapse
Ruu.zip are not installed with a custom recovery/sideloaded!! It must be flashed via fastboot ruu mode. Anyway this ruu is not for your phone, its a .401 base and you need a .61 base ruu of same version or higher than 3.63.61.1 but afaik there is no ruu for your phone... BTW the 1.20.401.1 ruu is a pre-release version without OTA updates so it a bad idea to use it.
grantymc said:
forgive me I can't paste links yet
I also tried the latest version of CM as this is what I was trying to revert back from this installed but just said 'installing' for nearly an hour then after I rebooted it left with a constant CM loading screen
Click to expand...
Click to collapse
Either because of a bad rom/download or because your recovery version is outdated. Flash twrp 2.6.3.3 or 2.6.3.4. Also clear cache every time your flash something and md5 check your roms/recovery before you flash them.
grantymc said:
I have a feeling I need S-OFF but can't seem to achieve through any of the methods described
Click to expand...
Click to collapse
S-OFF is not require to flash a custom rom like CM only if you want to convert your phone using a ruu not intended for your version.
Hi all,
My girlfriend has a HTC One M7, currentley Rooted with an Unlocked bootloader, Bulletproof Kernel, CWM Recovery, S-On (can't get S-OFF no matter what I try) and running the stock 4.4.2 Sense ROM that came with the phone.
She wants to install an OTA update, obviously this won't work with the phone in it's current state. I've got experience with all of this with my Note II, but the M7 is just a whole different can of worms.
What I've tried:
Getting S-OFF (no luck whatsoever with any tools)
Flashing stock recovery and kernel
Flashing stock recovery and kernel and applying the OTA manually via recovery
I've read everything on here and nothing seems to go in. She just wants to be able to install OTA updates, even if it means unrooting her phone permanently as this will happen each time there is an OTA update.
Someone, please guide me in the right direction! Step by step maybe?
Keep in mind there is no way I can't get S-OFF.
Huge thanks to anyone that can help. I'd be eternally in your debt!!
SmokinWaffle said:
My girlfriend has a HTC One M7, currentley Rooted with an Unlocked bootloader, Bulletproof Kernel, CWM Recovery, S-On (can't get S-OFF no matter what I try) and running the stock 4.4.2 Sense ROM that came with the phone.
She wants to install an OTA update, obviously this won't work with the phone in it's current state. I've got experience with all of this with my Note II, but the M7 is just a whole different can of worms.
Click to expand...
Click to collapse
I suppose the phone is trying to apply to ota update and then show a red triangle with an exclamation mark inside?
What I've tried:
Getting S-OFF (no luck whatsoever with any tools) Any error message when trying to S-OFF? You must use the correct tool for your hboot version (probably firewater) + combination of the correct rom + kernel
Flashing stock recovery and kernel --> You must have stock recovery for ota, ota will not install using a custom one.
Flashing stock recovery and kernel and applying the OTA manually via recovery --> appyling the ota manually from stock recovery require s-off
Click to expand...
Click to collapse
I've read everything on here and nothing seems to go in. She just wants to be able to install OTA updates, even if it means unrooting her phone permanently as this will happen each time there is an OTA update
Click to expand...
Click to collapse
.
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
http://forum.xda-developers.com/showpost.php?p=53151895&postcount=23
Keep in mind there is no way I can't get S-OFF.
Click to expand...
Click to collapse
still not sure about this, unless you get the "whelp" message from firewater...
post the output of fastboot getvar all except the imei number and serialno
alray said:
I suppose the phone is trying to apply to ota update and then show a red triangle with an exclamation mark inside?
Click to expand...
Click to collapse
Yep!
alray said:
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
http://forum.xda-developers.com/showpost.php?p=53151895&postcount=23
Click to expand...
Click to collapse
Interesting. I don't have the phone with me at the moment and it's late but I'll try to do the POWERUP + VOL tomorrow at some point, I'll get her to try stock recovery + kernel then do it and see what it's stopping at.
alray said:
still not sure about this, unless you get the "whelp" message from firewater...
Click to expand...
Click to collapse
Didn't get that message, just keeps going indefinetley or stops, and doesn't S-OFF. Tried Firewater, Revone, RumRunner, if there is another then I've almost certainly tried it, followed all the guides including the one that flashed Android Revolution...no idea..
alray said:
post the output of fastboot getvar all except the imei number and serialno
Click to expand...
Click to collapse
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [I]XXXXXXXXXXXX[/I]
(bootloader) imei: [I]XXXXXXXXXXXXXXX[/I]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Thanks for the prompt reply, really appreciate it and any help you can give.
SmokinWaffle said:
Yep!
Interesting. I don't have the phone with me at the moment and it's late but I'll try to do the POWERUP + VOL tomorrow at some point, I'll get her to try stock recovery + kernel then do it and see what it's stopping at.
Didn't get that message, just keeps going indefinetley or stops, and doesn't S-OFF. Tried Firewater, Revone, RumRunner, if there is another then I've almost certainly tried it, followed all the guides including the one that flashed Android Revolution...no idea..
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [I]XXXXXXXXXXXX[/I]
(bootloader) imei: [I]XXXXXXXXXXXXXXX[/I]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Thanks for the prompt reply, really appreciate it and any help you can give.
Click to expand...
Click to collapse
your version-main? (rom version) Go in settings --> About --> Software info --> Rom version
maybe there is a ruu you could use to restore the phone(4.19.401.9), if it match your version
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can also flash the stock 5.11.401.10 rom, recovery and firmware available on ARHD website
http://android-revolution-hd.blogspot.ca/p/android-revolution-hd-mirror-site-var.html
http://forum.xda-developers.com/showthread.php?t=2224752
alray said:
your version-main? (rom version) Go in settings --> About --> Software info --> Rom version
maybe there is a ruu you could use to restore the phone(4.19.401.9), if it match your version
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can also flash the stock 5.11.401.10 rom, recovery and firmware available on ARHD website
http://android-revolution-hd.blogspot.ca/p/android-revolution-hd-mirror-site-var.html
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
4.19.401.11
What exactly is the function of the RUU? I can't seems to get my head around it..
I'm guessing the ARHD steps are to try to get S-OFF?
SmokinWaffle said:
4.19.401.11
What exactly is the function of the RUU? I can't seems to get my head around it..
Click to expand...
Click to collapse
forget the ruu, your phone version is higher than the ruu. flashing a ruu (4.11.401.10) with a lower version than on your phone(4.11.401.11) require s-off.
I'm guessing the ARHD steps are to try to get S-OFF?
Click to expand...
Click to collapse
No, this is the latest stock rom(5.11.401.10) for your phone model (MID: PN0710000 and CID:HTC__001) including android 4.4.2 and sense 6.0
You can flash this stock odexed rom(5.11.401.10) from custom recovery, then flash the stock recovery(5.11.401.10) over the custom one and your phone will be stock and ready to take future ota update. You may also want to update firmware to 5.11.401.10
So after flashing that rom and stock recovery, ota would be ready to roll? Would the kernel matter?
What's the purpose / Difference of firmware and how is it updated? On my note II it was just choose a rom choose a kernel and off you go. This is so much more involved
SmokinWaffle said:
So after flashing that rom and stock recovery, ota would be ready to roll? Would the kernel matter?
Click to expand...
Click to collapse
stock kernel in included in the rom (boot.img) so if you don't flash any other kernel it should be fine.
What's the purpose / Difference of firmware and how is it updated? On my note II it was just choose a rom choose a kernel and off you go. This is so much more involved
Click to expand...
Click to collapse
firmware is all the low level code required for your phone hardware to works with the software (OS)
when speaking about HTC phone, firmware.zip include HBOOT(bootloader), BOOT(kernel), Recovery, Radio and some other stuff. if you want your phone to be 100% stock you need both stock rom + stock firmware to match the same version i.e 5.11.501.10
normally, the firmware is updated at the same time the rom version is updated (from an ota update) If you flash a rom, the rom will be updated but not the firmware.
Updating the firmware manually can be dangerous is you don't know what you are doing and flashing the wrong file. You can update firmware using this command from bootloader (with the correct firmware.zip package in the same folder you have adb and fastboot):
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
also it looks like flashing a 5.x.xxx.x firmware over a 3.x.xxx.x firmware will brick your phone. from what i see, your phone should be on a 4.x.401.x version at the moment, so it theory it should be fine.
Fails on:
>>>setting permissions
set_metadata_recursive: some changes failed
E:Error in /data/media/0/one_5.11.401.10_odexed.zip
(status 7)
Tried 3 different versions of cwm. Bad rom download?
Thinking about it I just re read your above post, could it be because the firmware isn't matched? I read your 'it should be fine' as 'dont update the firmware' not 'its fine to update' which I think is what you meant...
Firmware is 4.19.401.11 however the rom is 5.11.401.10. Can't believe I overlooked this, guess firmware needs to be 5.11.401.10 for the rom to take?
SmokinWaffle said:
Tried 3 different versions of cwm. Bad rom download?
Click to expand...
Click to collapse
No you are using CWM thats the problem. always use TWRP 2.6.3.3
alray said:
No you are using CWM thats the problem. always use TWRP 2.6.3.3
Click to expand...
Click to collapse
Huh?
Is this a requirement of ARHD or....?
Just seems odd
Edit: success!! All seems to work. Thank you. She's overjoyed!!!
The cidnumber of my phone is : VODAP021 and it is a s-on rooted phone.
Yesterday I just root my HTC one followed the steps on the htcdev website. And then didn't check the status of my phone( s-on or s-off). After installing a custom ROM , The HTC one strike on the HTC screen and rebooted again and agin.
I have tried many methods like relock the phone and flash the ruu rom , but no matter how many times I tried, it is failed on the step of signature
checking. I post the output below :
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
PS:
I really download the zip from the htc1guru website and use the command :
fastboot oem rebootRUU
fastboot flash zip
.
Thank you guys first cause this is the first time I post thread here.
yimuxia said:
The cidnumber of my phone is : VODAP021 and it is a s-on rooted phone.
Yesterday I just root my HTC one followed the steps on the htcdev website. And then didn't check the status of my phone( s-on or s-off). After installing a custom ROM , The HTC one strike on the HTC screen and rebooted again and agin.
I have tried many methods like relock the phone and flash the ruu rom , but no matter how many times I tried, it is failed on the step of signature
checking. I post the output below :
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
PS:
I really download the zip from the htc1guru website and use the command :
fastboot oem rebootRUU
fastboot flash zip
.
Thank you guys first cause this is the first time I post thread here.
Click to expand...
Click to collapse
Which ruu are you tring to flash? Afaik there is no RUU availabe for vodap021
your bootloop issue is probably because you have flashed an incompatible rom or because you have flashed a rom with the wrong recovery version.
please answer all questions below
What rom have you tried to flash? (name, version and link)
What recovery are you using (name and version)
post the output of "fastboot getvar all" minus the IMEI and SERIALNO
What RUU are you trying to flash?
Sorry for late replying
alray said:
Which ruu are you tring to flash? Afaik there is no RUU availabe for vodap021
your bootloop issue is probably because you have flashed an incompatible rom or because you have flashed a rom with the wrong recovery version.
please answer all questions below
What rom have you tried to flash? (name, version and link)
What recovery are you using (name and version)
post the output of "fastboot getvar all" minus the IMEI and SERIALNO
What RUU are you trying to flash?
Click to expand...
Click to collapse
Sorry for the late replying, I was working before. - -# .
1: Firstly after rooting my HTC one , I tried CM rom for HTC one (cm-10.2.1-m7ul.zip).
The phone rebooted itself again and again and failed to enter the system.
Then I searched on xda and tried Guru Reset M7 2.24.980.2 followed others instruction. The ruu is from the website of htc1guru(sorry I am still not able to post outside links)
2: The recovery I am using is : openrecovery-twrp-2.7.1.1-m7.img And enter my recovery on my phone, I can see the information below:
CLockworkMod Recovery v6.0.3.3
3: Below is the information by using fastboot getvar all commnd:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.980.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: minus XD
(bootloader) imei: minus XD
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 3850mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I am so glad you guys reply me .I just get the phone three days before - - #.
need help
need help , Still cant open my phone yet~
yimuxia said:
need help , Still cant open my phone yet~
Click to expand...
Click to collapse
not sure what you want to accomplish, but if you just want to get your phone up and running for now
grab a ROM from the Development section
flash correct recovery, push the rom, and install it; instructions inthe Frequently Asked Question sticky on page 3
nkk71 said:
not sure what you want to accomplish, but if you just want to get your phone up and running for now
grab a ROM from the Development section
flash correct recovery, push the rom, and install it; instructions inthe Frequently Asked Question sticky on page 3
Click to expand...
Click to collapse
Thank you for replying , I will try this first after work today !
thank you !
I tried changing my HTC One M8_WHL PVT SHIP S-OFF into developer edition using the guide on http://htc-one.wonderhowto.com/how-...edition-for-super-fast-sense-updates-0156524/ . I successfully changed the MID and the CID without breaking a sweat. After, I used TWRP to restore the backup which the guide instructed me to download and restore. After restoring that backup, device could only boot HBOOT. Now I tried running the RUU.exe for Developer Edition and I get the error which asks that I run the correct RUU for the device. Now, the device doesn't boot pass HBOOT
What I can do ...
1. Boot into TWRP recovery
2. Give fastboot commands with HBOOT
3. Boot into RUU via fastboot
What I can't do ...
1. Boot the device
2. Revert the MID change to its original state cos I will need to run ADB Shell to do that, which cannot be done from HBOOT
3. No RUU.exe is responding to flashing the device
The specific help I need ...
1. Be able to Change MID using Fastboot so I can run a SPRINT RUU
fastboot getvar all results ...
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: Mod Edit
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: Mod Edit
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: BS_US002
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.031s
PLEASE HELP!
You forgot the most important thing to do before doing something like this....read.
Your M8 must be a GSM model, like AT&T, T-Mobile, and most international variants.
Click to expand...
Click to collapse
Have you tried running the command to change the MID while booted to twrp?
As I have been using my GSM SIM in it, it didn't occur to me that it could be any different from a GSM Model. When I bought it, it came with S-Off and CID 11111111, though the bootloader was locked (like any other locked HBOOT from factory, not relocked).
BD619 said:
You forgot the most important thing to do before doing something like this....read.
Have you tried running the command to change the MID while booted to twrp?
Click to expand...
Click to collapse
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.
Economistaterry said:
My M8 is a GSM Model. I use to use my GSM SIM in it.
Click to expand...
Click to collapse
HTC One M8_WHL
Click to expand...
Click to collapse
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.
Try changing your CID to SuperCID then try the Sprint RUU.
BD619 said:
is Sprint which is CDMA not GSM.
You said in your first post you could not revert your MID because you can't run adb shell... adb works in recovery...it's worth a shot.
Click to expand...
Click to collapse
ADB Shell won't start in TWRP sideload. But ADB devices comes out positively with the list of devices attached.
BD619 said:
Try changing your CID to SuperCID then try the Sprint RUU.
Click to expand...
Click to collapse
This was one of my first options. Didn't work.
Economistaterry said:
This was one of my first options. Didn't work.
Click to expand...
Click to collapse
Have you tried changing it back to Sprint CID?
BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
I haven't. The device came with Super CID. Let me try that and see. However, I tried flashing the firmware of Sprint via RUU with Super CID. The MID error showed up. I feel same will happen even if I change to Sprint CID, but I'll give it a shot.
BD619 said:
Have you tried changing it back to Sprint CID?
Click to expand...
Click to collapse
No luck.
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
Economistaterry said:
Kindly show me direct me to a thread on how I can change the MID while booted to twrp. Thank you.
Click to expand...
Click to collapse
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.
Vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling TWRP i just tested it on v2.8.6 2015-04-22 p1
---------- Post added at 05:06 AM ---------- Previous post was at 05:00 AM ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your M8 into a piece of aluminum.
Click to expand...
Click to collapse
Bookmarked thanks.
vcek said:
adb should work in twrp(dont use adb sideload option, it should work without doing anything), try reinstalling twrp i just tested it on v2.8.6 2015-04-22 p1
---------- post added at 05:06 am ---------- previous post was at 05:00 am ----------
here is the link(post #2 has code for sprint), please be very careful it can easily turn your m8 into a piece of aluminum.
Click to expand...
Click to collapse
yes! Yes! You are a life saver! Thank you so much!
It worked! It worked!
Phone is back alive! Wheew!