[Q] Bootloop, S-ON, HBOOT 1.55, version-main blank - One (M7) Q&A, Help & Troubleshooting

TWRP 2.6.3.3 is installed, adb is working. Funny enough, adb stops working with TWRP 2.7.
..adb sideload of Android_Revolution_HD-One_53.0 seems to work, go through the install questions, but never gets past HTC logo on reboot.
...flashed boot.img from HD-53 after sideload just in case, no change
...did factory reset in twrp, as well as wiping cache in twrp.. no change
..tried relocking bootloader and flashing RUU zip for Telus001, but failed with error, FAILED (remote: 12 signature verify fail)
getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 12345
(bootloader) imei: 12345
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
At a bit of a loss... but it doesn't seem dead just yet....

romansj said:
TWRP 2.6.3.3 is installed, adb is working. Funny enough, adb stops working with TWRP 2.7.
..adb sideload of Android_Revolution_HD-One_53.0 seems to work, go through the install questions, but never gets past HTC logo on reboot.
...flashed boot.img from HD-53 after sideload just in case, no change
...did factory reset in twrp, as well as wiping cache in twrp.. no change
..tried relocking bootloader and flashing RUU zip for Telus001, but failed with error, FAILED (remote: 12 signature verify fail)
getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: 12345
(bootloader) imei: 12345
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
At a bit of a loss... but it doesn't seem dead just yet....
Click to expand...
Click to collapse
Did you md5 checked both your recovery and your rom before flashing?
Btw, you need a locked or relocked bootloader to flash a ruu with S-ON... Thats why you got the signature fail.

alray said:
Did you md5 checked both your recovery and your rom before flashing?
Btw, you need a locked or relocked bootloader to flash a ruu with S-ON... Thats why you got the signature fail.
Click to expand...
Click to collapse
Didn't do md5 check, but twrp 2.6.3.3 comes up as expected, and AD-53 installs as expected.
The bootloader was relocked for the RUU zip install.. I thought I read somewhere that it was because there is no OS present, or something.

romansj said:
Didn't do md5 check, but twrp 2.6.3.3 comes up as expected, and AD-53 installs as expected.
The bootloader was relocked for the RUU zip install.. I thought I read somewhere that it was because there is no OS present, or something.
Click to expand...
Click to collapse
what ruu are you trying to flash?

alray said:
what ruu are you trying to flash?
Click to expand...
Click to collapse
RUU Zip M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1_R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336571_signed_2_decrypted

romansj said:
RUU Zip M7_UL_JB43_SENSE50_MR_TELUS_WWE_3.22.661.1_R3_Radio_4A.20.3263.16_10.38k.1157.04_release_336571_signed_2_decrypted
Click to expand...
Click to collapse
you are S-ON, you can't use decrypted RUU! With s-on you can only use SIGNED ruu
http://androidruu.com/getdownload.p...09_10.26.1718.01L_release_351500_signed_2.exe

alray said:
you are S-ON, you can't use decrypted RUU! With s-on you can only use SIGNED ruu
Click to expand...
Click to collapse
Thanks, I'll give that a shot once it finishes downloading. I was coming to the same conclusion but was stuck on trying to figure out why sideloading wasn't working. I guess the firmware is corrupt or some such? First time messing with an HTC and the world of RUUs
Will report back..

alray said:
you are S-ON, you can't use decrypted RUU! With s-on you can only use SIGNED ruu
]
Click to expand...
Click to collapse
Fails with error 155... Here's the relevent log:
htc_fastboot -s serial getvar boot-mode</CMD>
Execution time is 3(ms)boot-mode: RUU</OUT>
htc_fastboot -s serial erase cache</CMD>
Execution time is 60(ms)erasing 'cache'... OKAY</OUT>
Try to read image count from android-info.txt in rom.zip
The rom is encrypted, read the header instead.
[getImageCount] Large and signed rom
getImageCount, nHR: 18
htc_fastboot -s serial -d flash zip C:\Users\rhino\AppData\Local\Temp\{8B222E2D-DAB9-49ED-9B39-D1FC22F745A1}\{50F2F878-636A-496F-A7CB-544C067E0C4B}\rom.zip</CMD>
sending 'zip'... (42406 KB) OKAY</OUT>
=====Sending zip OK=====
writing 'zip'... (bootloader) adopting the signature contained in this image...</OUT>
(bootloader) signature checking...</OUT>
(bootloader) rom parsing start ...</OUT>
(bootloader) rom parsing finish ...</OUT>
(bootloader) zip header checking...</OUT>
(bootloader) zip info parsing...</OUT>
(bootloader) Read zipped android_info fail</OUT>
Execution time is 10382(ms)</OUT>
FAILED (status read failed (Too many links))</OUT>

Related

Need stock RUU

Can someone help me out?
I'm trying to either A.) return to stock then upgrade OTA to the latest firmware or B.) Flash said firmware from fastboot. However the RUU (Sprint_HTC_One_M8_3.30.654.2_RUU.zip) I tried from here failed the signature check and now my device will only boot into the bootloader.
Heres my device info.
Code:
~/Documents/Android/sdk/platform-tools » fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.08.20.0612_4
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.16.654.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45LSF00310
(bootloader) imei: 990004994158875
(bootloader) imei2: Not Support
(bootloader) meid: 99000499415887
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: SPCS_004
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: d4c3cae5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.015s
And here is the failure message I get when I try to flash from fastboot.
Code:
fastboot flash zip ~/Desktop/android/3.30.654.2_firmware.zip
target reported max download size of 1830612992 bytes
sending 'zip' (51951 KB)...
OKAY [ 2.445s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.154s
Atm my phone is bricked :/
All RUU's can be found in the thread linked below, along with installation instructions:
http://forum.xda-developers.com/showthread.php?t=2729173
Magnum_Enforcer said:
All RUU's can be found in the thread linked below, along with installation instructions:
http://forum.xda-developers.com/showthread.php?t=2729173
Click to expand...
Click to collapse
I have tried that via fastboot. Is there something I have to do other than 'fastboot oem rebootRUU && flash zip firmware.zip' from the RUU?
Did you relock your bootloader?
Magnum_Enforcer said:
Did you relock your bootloader?
Click to expand...
Click to collapse
Yeah I figured it out. For some reason I could only use the windows RUU utility. All is well now, thanks!
akasoldats said:
Yeah I figured it out. For some reason I could only use the windows RUU utility. All is well now, thanks!
Click to expand...
Click to collapse
Glad to help:thumbup:

[Q] [q] fastboot gevar version-main missing. want to go back to stock, what ruu?

WHAT ruu should i flash to get back to stock, tried flashing roms but i get stuck in a bootloop the htc screen or it reboots to bootloader? this is my fastboot getvar all info.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA348S906097
(bootloader) imei: 99xxxxxxxxxxxxx
(bootloader) meid: 99xxxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3837mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-371c4f408e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.376s
Dpimpim said:
WHAT ruu should i flash to get back to stock, tried flashing roms but i get stuck in a bootloop the htc screen or it reboots to bootloader? this is my fastboot getvar all info.
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA348S906097
(bootloader) imei: 99xxxxxxxxxxxxx
(bootloader) meid: 99xxxxxxxxxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3837mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-371c4f408e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.376s
Click to expand...
Click to collapse
M7_WLS = Sprint so use a sprint RUU
your bootloop issue is probably because you are trying to flash GSM rom not compatible with the sprint variant.
alray said:
M7_WLS = Sprint so use a sprint RUU with CWS__001 cid
your bootloop issue is probably because you are trying to flash GSM rom not compatible with the sprint variant.
Click to expand...
Click to collapse
any link to get the ruu? will be appreciated
Dpimpim said:
any link to get the ruu? will be appreciated
Click to expand...
Click to collapse
htc1guru.com but this site is currently down
(link removed)
save it in the same folder where you have fastboot and adb on your computer, rename it ruu "ruu.zip" to make it easier in the command prompt
open a command prompt from that folder (or cd to that folder)
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
Do not do what said above if your computer is running windows 8. Must be done using Win7, Linux or MacOS.
alray said:
htc1guru.com but this site is currently down
so you can use that one posted by nkk71 on androidfilhost.com
save it in the same folder where you have fastboot and adb on your computer, rename it ruu "ruu.zip" to make it easier in the command prompt
open a command prompt from that folder (or cd to that folder)
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
Do not do what said above if your computer is running windows 8. Must be done using Win7, Linux or MacOS.
Click to expand...
Click to collapse
should i relock bootloader prior to that?
Dpimpim said:
should i relock bootloader prior to that?
Click to expand...
Click to collapse
Do not relock the bootloader, your phone is s-off so relocking the bootloader is not needed. Better to leave it unlocked.
alray said:
Do not relock the bootloader, your phone is s-off so relocking the bootloader is not needed. Better to leave it unlocked.
Click to expand...
Click to collapse
just downloaded the ruu file. will get back at you with how it goes
alray said:
Do not relock the bootloader, your phone is s-off so relocking the bootloader is not needed. Better to leave it unlocked.
Click to expand...
Click to collapse
C:\adb>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1033216 KB)...
OKAY [ 51.189s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 58.905s
the flashing failed
Dpimpim said:
C:\adb>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
sending 'zip' (1033216 KB)...
OKAY [ 51.189s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 58.905s
the flashing failed
Click to expand...
Click to collapse
sorry my bad, linked the wrong ruu
this one should work https://www.androidfilehost.com/?fid=23203820527945356
alray said:
sorry my bad, linked the wrong ruu
this one should work https://www.androidfilehost.com/?fid=23203820527945356
Click to expand...
Click to collapse
haha! downloading, will get back at you. thanks a bunch
alray said:
sorry my bad, linked the wrong ruu
the download worked. i'm now on stock rom. thanks
Click to expand...
Click to collapse

stucked in HTC logo

good day can you please help me with my problem. i was trying to a flash a custom ROM then then my M7 was stucked in the boot logo.
my hboot version 1.57.000 and flagged as ***TAMPERED*** and ***RELOCKED***. i have S-ON. and here's my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35AW907688
(bootloader) imei: *********180157
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
your help will be very much appreciated.
thanks and more power
akoskiko99 said:
good day can you please help me with my problem. i was trying to a flash a custom ROM then then my M7 was stucked in the boot logo.
my hboot version 1.57.000 and flagged as ***TAMPERED*** and ***RELOCKED***. i have S-ON. and here's my getvar
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.13.707.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35AW907688
(bootloader) imei: *********180157
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
your help will be very much appreciated.
thanks and more power
Click to expand...
Click to collapse
why is your bootloader relocked ? Unlock it if you want to flash and use Roms
clsA said:
why is your bootloader relocked ? Unlock it if you want to flash and use Roms
Click to expand...
Click to collapse
i've already unlocked my M7 using HTCDev but still i've encounted and error
c:\fastboot>fastboot flash zip c:\fastboot\firmware.zip
sending 'zip' (433840 KB)...
OKAY [ 18.603s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 18.840s
akoskiko99 said:
i've already unlocked my M7 using HTCDev but still i've encounted and error
c:\fastboot>fastboot flash zip c:\fastboot\firmware.zip
sending 'zip' (433840 KB)...
OKAY [ 18.603s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAILED (remote: 24 parsing android-info fail)
finished. total time: 18.840s
Click to expand...
Click to collapse
Now why are you flashing firmware ? the bootloader has to be relocked to flash firmware with s-on
You said you were flashing a rom / needs bootloader unlocked / custom recovery installed
flashing firmware / RUU needs bootloader relocked
clsA said:
Now why are you flashing firmware ? the bootloader has to be relocked to flash firmware with s-on
You said you were flashing a rom / needs bootloader unlocked / custom recovery installed
flashing firmware / RUU needs bootloader relocked
Click to expand...
Click to collapse
Looks to me mate like hes renamed the rom to firmware.zip and trying to flash it like firmware, hence the failed to parse Android info.
You can't flash it like that, you need to put the rom you downloaded on your internal storage and flash / install it from within twrp recovery.
clsA said:
why is your bootloader relocked ? Unlock it if you want to flash and use Roms
Click to expand...
Click to collapse
Seanie280672 said:
Looks to me mate like hes renamed the rom to firmware.zip and trying to flash it like firmware, hence the failed to parse Android info.
You can't flash it like that, you need to put the rom you downloaded on your internal storage and flash / install it from within twrp recovery.
Click to expand...
Click to collapse
how can i can put the stock rom in the internal storage if my phone stucked in the boot logo?
clsA said:
Now why are you flashing firmware ? the bootloader has to be relocked to flash firmware with s-on
You said you were flashing a rom / needs bootloader unlocked / custom recovery installed
flashing firmware / RUU needs bootloader relocked
Click to expand...
Click to collapse
hi clsA,
sorry if i confused, um so confused myself. again my apologies.
by this time, i've already unlocked the HBOOT using HTCdev
i've already installed TWRP to flash ROM
but the problem now is how can i transfer a stock rom to my M7 if it is stucked in the boot logo?
i hope i made myself clear to you.
thanks
akoskiko99 said:
hi clsA,
sorry if i confused, um so confused myself. again my apologies.
by this time, i've already unlocked the HBOOT using HTCdev
i've already installed TWRP to flash ROM
but the problem now is how can i transfer a stock rom to my M7 if it is stucked in the boot logo?
i hope i made myself clear to you.
thanks
Click to expand...
Click to collapse
TWRP 2.8.5.0 gives many options you can mount storage as mtp
usb otg
Sideload rom
Adb push
yatindroid said:
TWRP 2.8.5.0 gives many options you can mount storage as mtp
usb otg
Sideload rom
Adb push
Click to expand...
Click to collapse
i did it! man!! i was so close in giving up!!!...
thanks to all you who spent their time replying on my post.
clsA
Seanie
yatindroid
i forget the others. sorry.
Thank you very much!

Stock HTC One M7 Bootloop after OTA

Hello,
I need help with my HTC One M7 UL. After an OTA Update my phone started to bootloop. It has never been Rooted, its S-ON and I just unlocked the bootloader to try to fix it, didnt work though. Ive searched everywhere and I can not find a solution.
My getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:xxx
(bootloader) imei:xx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Ive tryed to flash PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip but I only get an error:
sending 'zip'... (43286 KB) OKAY
sending time = 2.782 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 9(s)
Is it because im S-ON? Is it even possible to S-OFF it when I cant boot the Phone into the OS?
Help would be really apreciated
xtremtuner said:
Hello,
I need help with my HTC One M7 UL. After an OTA Update my phone started to bootloop. It has never been Rooted, its S-ON and I just unlocked the bootloader to try to fix it, didnt work though. Ive searched everywhere and I can not find a solution.
My getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.09.401.11
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Ive tryed to flash PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip but I only get an error:
sending 'zip'... (43286 KB) OKAY
sending time = 2.782 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 9(s)
Is it because im S-ON? Is it even possible to S-OFF it when I cant boot the Phone into the OS?
Help would be really apreciated
Click to expand...
Click to collapse
relock your bootloader to flash a ruu. Also remove your IMEI/SN from your above post.
Thanks for the quick reply, removed imei and SN. But I have already tryed to flash with locked bootloader, it did not work
xtremtuner said:
Thanks for the quick reply, removed imei and SN. But I have already tryed to flash with locked bootloader, it did not work
Click to expand...
Click to collapse
can you post a screenshot of your command prompt please
alray said:
can you post a screenshot of your command prompt please
Click to expand...
Click to collapse
Sure:
xtremtuner said:
Sure:
Click to expand...
Click to collapse
Your phone must be booted in ruu mode to flash a ruu
you must use htc_fastboot.exe to flash a ruu, not fastboot.exe
Code:
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
alray said:
Your phone must be booted in ruu mode to flash a ruu
you must use htc_fastboot.exe to flash a ruu, not fastboot.exe
Code:
htc_fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.22_Radio_4T.35.3218.16_10.33Q.1718.01L_release_430964_signed.zip
htc_fastboot reboot
Click to expand...
Click to collapse
That worked, thank you!!! :laugh:

How to restore to Stock Sense (6) with S-ON?

I have used the Guru reset from HTC 1 Guru to reset my HTC One M7 on Three (Hutchinson 3G) UK with version 7.19.771.1.
Like some others I have had the problem of a boot loop when getting the Android 4.3 OTA after 2 minor updates which worked fine.
I have learned that this happened because my firmware is higher than the firmware of the OTA.
I was able to get out of the boot loop fine by flashing TWRP recovery and restoring to my TWRP backup of CyanogenMod, but I still want to go back to stock Sense.
I can't S-OFF as Sunshine is the only tool for HBOOT 1.61 and that won't work on CyanogenMod as it says that I need to be using stock. Also, I don't have the money to pay for it anyway.
So I'm wondering if anyone knows how I can get to stock Sense with all updates applied.
I was wondering if I could do a Guru reset again without performing updates, and then use a RUU of a more recent version to get to updated stock. I thought this may work because the version of the RUU would be higher than that of the current software.
Or would I get something from the HTC Dev Center downloads? Etc
Or is there another way?
Thanks for reading!
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.771.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3786mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Zannxdaaccount said:
I have used the Guru reset from HTC 1 Guru to reset my HTC One M7 on Three (Hutchinson 3G) UK with version 7.19.771.1.
Like some others I have had the problem of a boot loop when getting the Android 4.3 OTA after 2 minor updates which worked fine.
I have learned that this happened because my firmware is higher than the firmware of the OTA.
I was able to get out of the boot loop fine by flashing TWRP recovery and restoring to my TWRP backup of CyanogenMod, but I still want to go back to stock Sense.
I can't S-OFF as Sunshine is the only tool for HBOOT 1.61 and that won't work on CyanogenMod as it says that I need to be using stock. Also, I don't have the money to pay for it anyway.
So I'm wondering if anyone knows how I can get to stock Sense with all updates applied.
I was wondering if I could do a Guru reset again without performing updates, and then use a RUU of a more recent version to get to updated stock. I thought this may work because the version of the RUU would be higher than that of the current software.
Or would I get something from the HTC Dev Center downloads? Etc
Or is there another way?
Thanks for reading!
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.771.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3786mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934542817
Here's a RUU for you. It should work just fine
Poslano sa mog HTC One koristeći Tapatalk
donkeykong1 said:
Here's a RUU for you. It should work just fine
Click to expand...
Click to collapse
Thank you - so I flash this using TWRP then flash stock recovery using fastboot?
Zannxdaaccount said:
Thank you - so I flash this using TWRP then flash stock recovery using fastboot?
Click to expand...
Click to collapse
You flash it via fastboot in RUU mode. First command you need is "fasboot oem rebootRUU" That will boot your phone in bootloader mode ( black screen with silver HTC logo ). Then "fastboot flash zip (name of the zip).zip. You might want to rename that zip to something simple like "firmware" to avoid mistakes when writing in fastboot. And one mote note - you need htc fasboot to flash this, not the regular fastboot
Poslano sa mog HTC One koristeći Tapatalk
donkeykong1 said:
You flash it via fastboot in RUU mode. First command you need is "fasboot oem rebootRUU" That will boot your phone in bootloader mode ( black screen with silver HTC logo ). Then "fastboot flash zip (name of the zip).zip. You might want to rename that zip to something simple like "firmware" to avoid mistakes when writing in fastboot. And one mote note - you need htc fasboot to flash this, not the regular fastboot
Poslano sa mog HTC One koristeći Tapatalk
Click to expand...
Click to collapse
What is HTC fastboot and how do I get that?
https://www.androidfilehost.com/?w=...f812d4f8d7d551183257032e28f6937dd8bb61c6af2ca
donkeykong1 said:
https://www.androidfilehost.com/?w=...f812d4f8d7d551183257032e28f6937dd8bb61c6af2ca
Click to expand...
Click to collapse
C:\Users\\Desktop\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash zip ruu.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
Zannxdaaccount said:
C:\Users\\Desktop\AndroidSDKSlim\android-sdk-windows\platform-tools>fastboot flash zip ruu.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
Put the fastboot.exe file in your regular fastboot folder. That should fix it. I forgot to write that, sorry
donkeykong1 said:
Put the fastboot.exe file in your regular fastboot folder. That should fix it. I forgot to write that, sorry
Click to expand...
Click to collapse
I had already done that. So there is the normal fastboot.exe that was already in there, and the htcfastboot.exe.
Zannxdaaccount said:
I had already done that. So there is the normal fastboot.exe that was already in there, and the htcfastboot.exe.
Click to expand...
Click to collapse
Try with "htc_fastboot flash zip..."
donkeykong1 said:
Try with "htc_fastboot flash zip..."
Click to expand...
Click to collapse
Alright, now on the command prompt it's saying flash zip complete but on my phone I've got the HTC silver logo with the green progress bar at about 80%, not moving by the looks of it?
Zannxdaaccount said:
Alright, now on the command prompt it's saying flash zip complete but on my phone I've got the HTC silver logo with the green progress bar at about 80%, not moving by the looks of it?
Click to expand...
Click to collapse
That's the way it should be. Now "htc_fastboot reboot" and wait till it finishes upgrading apps. Then set up, and enjoy
donkeykong1 said:
That's the way it should be. Now "htc_fastboot reboot" and wait till it finishes upgrading apps. Then set up, and enjoy
Click to expand...
Click to collapse
It's setting up apps now. Thank you very much!!
Zannxdaaccount said:
It's setting up apps now. Thank you very much!!
Click to expand...
Click to collapse
No problem mate. Glad I could help
Hi,
I have exactly the same issue, needing the same RUU. But the one linked to on android forums is corrupt. fastboot says it can't find the image title and if I open it in in WinRAR it fails the integrity test. I downloaded it three times and FC'd them. They are identicle but all corrupt. Is there another version out there or can you share one you've used? Thanks.
gunholio77 said:
Hi,
I have exactly the same issue, needing the same RUU. But the one linked to on android forums is corrupt. fastboot says it can't find the image title and if I open it in in WinRAR it fails the integrity test. I downloaded it three times and FC'd them. They are identicle but all corrupt. Is there another version out there or can you share one you've used? Thanks.
Click to expand...
Click to collapse
Don't try to extract a RUU zip, it will get corrupted because it's encrypted. Just download the zip, put it in your fastboot folder, and flash via fastboot with your phone in RUU mode
donkeykong1 said:
Don't try to extract a RUU zip, it will get corrupted because it's encrypted. Just download the zip, put it in your fastboot folder, and flash via fastboot with your phone in RUU mode
Click to expand...
Click to collapse
When I try to fastboot it I get an error
h ttp://imgur . com/a/cm8YL
I can't post images until I've posted more posts...
---------- Post added at 07:17 PM ---------- Previous post was at 06:58 PM ----------
I've tried that many things I forgot what I was meaning to show you. This is the error I get
C:\adbLink>htc_fastboot.exe flash zip PN07IMG_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1_Radio_4T.35.3218.16_10.33Q.1718.01L_release_420805_signed_.zip
sending 'zip'... (43287 KB) OKAY
sending time = 3.203 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 9(s)
My info is
C:\adbLink>htcfastboot2.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.771.21
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 69(ms)
C:\adbLink>htc_fastboot.exe flash zip PN07IMG_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1_Rad io_4T.35.3218.16_10.33Q.1718.01L_release_420805_si gned_.zip
sending 'zip'... (43287 KB) OKAY
sending time = 3.203 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) Read zipped android_info fail
FAIL99 unknown fail
FAILED (remote: 99 unknown fail)
Execution time is 9(s)
Click to expand...
Click to collapse
gunholio77 said:
My info is
C:\adbLink>htcfastboot2.exe getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.771.21
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 69(ms)
Click to expand...
Click to collapse
Your version-main is 7.19.771.21 so you need a RUU same or newer than that number. 7.19.771.1 will not work (its older). Unless you want to edit your version-main number from the /misc partition, the simplest is to flash the 7.19.771.21 RUU.
You can download it from here: https://www.androidfilehost.com/?fid=24052804347763965
There are some problems today on androidfilehost.com so if you have some issues downloading the file, try later :good:
I get the same failed message with that ruu - I've put cyangenmod back on for now, so I have a working phone. But I will return to this an get it working
Really appreciate your help with this - Thanks

Categories

Resources