Database Develop

tilt totally dead, cannot recharge, cannot turn on, help.

hi, new member here.
bought my tilt on 10/4/07. has been flawless since that time.
used the nav quite a bit during a road trip, used a cig lighter usb charger.
got home and my battery was at roughly 40%.
put it on the charger at night went to sleep. in morning disconnected it at 8 am. shortly after i arrived at work i got the critical battery low chime. checked and it had like 7% battery life.
figured i didnt plug it in right, or it got knocked loose some how and didnt get charged.
put it in flight mode to minimize battery usage. left work at 2 30 pm (4% battery life) and put it on the car charger. got home and put it on the HTC supplied wall charger. light turned amber, so i assumed it was charging.
checked an hour later and turned phone on, it said 0%, and immediately died. left it on the charger for a few hours and the light was still amber, turned it back on and again 0% and phone immediately died and did a soft reset on its own. i turned the phone off and left it on the ac charger, took out the sim card and put it in an old blackberry to use while the battery was charging.
its been on the ac wall charger for the last several hours, i checked and the phone is totally dead, cannot turn it on, and the LED at the top is now RED.
what is the problem here? why wont this thing charge?
thanks in advance, i have alot of critical info on this device and any help would be greatly appreciated.
i cannot hard reset because i cannot turn the flippign thing on....

Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.

I'd try a different charger first. If that makes no difference then a different battery. If that still does not make any difference then time to exchange it.

Lidberg said:
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
Click to expand...
Click to collapse
connected to either the computer or the wall charger, the LED thats normally amber when charging, and green when charged, remains red.

I had something very similar happen to my wizard.
And as weird as it sounds, the only fix was to charge the battery in a friends wizard on his charger. I'd check the battery if possible.

Could be the battery. Know any place or anyone that will let you try a charged battery? If not, you might have to go in to an AT&T store.

i think i got it working. did some reading/browsing...
took a usb wire and cut the mini usb head off. dissected it and found the the red and black charging wires. took out the battery and held the leads to teh battery while the other end was plugged into a USB/AC adapter wall charger from a old blackberry. after manually charging the battery for several minutes, i put the battery back in the phone and the phone started up. now it seems to be charging off the wall charger and the led is now amber from red.
thanks for all your help/suggestions.

well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.

tiltyoself said:
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
Click to expand...
Click to collapse
Repeat this proceedure but this time do not turn the phone on, just plug it in to the wall charger once you have zapped the battery again.
Turning your phone on probably just caused the already recovering battery to die whiles it is trying to take on a charge.
It is mentioned quite a lot on the boards that Li-Ion Batteries do not like being over disscharged and there is usually a little protection circuit in the battery to provent complete disscharging although this circuit may be on board the phone. Completely disscharging a Li-Ion cell will kill it stone dead and it will need replacing.
When you took the battery out and so called jump started it with your flying leads, this possibly reset the little protection circuit in the battery so it can now take on a charge. I feel that once you turned on the phone, this was to much for the already depleted cell to take and possibly re-tripped its inbuilt circuit.
If you do manage to recover you cell, in future it is good practice not to let the battery go below about 25%. Li-ion cells are generally happy being top off regularly.
I hope this helps buddy
Do let us know!
Cheers
C.

thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...

That Sucks! I hope they'll give you a new battery.
tiltyoself said:
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
Click to expand...
Click to collapse

I had exactly the same problem with my battery. It came on though after a day. Although the battery life after this happened went down to 10hrs max on standby. I sent the phone back and got a new one and now all is fine.

This is a problem that affects almost all makes of phone. There are three (main) causes of the problem:
1.
The battery charge drops too low to allow the charging circuit to recognise a battery is even in place (red no charge light stays lit)
possible solution:
http://forum.xda-developers.com/show...22&postcount=6
(in the end very similar in the end to the USB wire used in post above)
2.
A faulty battery (but if you can charge it using a cut usb cable or using a couple of AA batteries this may not be a faulty battery.
3.
A faulty charger OR a charger not delivering 5v at 1000mA as the OEM one does. Many chargers that are used for other phones or generic chargers only deliver 500mA. This is not enough when your battery drops very low. (these chargers are OK for occasional use but I do not advise using them regularly particularly if the no-charge syndrome has shown itself)
4.
A faulty USB connection on the phone. I have now seen a couple of reports where the fine wire connections in the phones USB port have become bent out of place.
Number 4 above is at least possible for the OP as it seems the battery will charge using a cut USB cable but not when either the PC USB cable or mains charger is connected. A USB port on the phone with a a bent internal contact would explain what's happening.
A previous poster was able with a needle or similar to bend the contact back into place.
Mike

i had the same problem with my phone.
put it in the charger overnight and woke up in the morning and couldnt turn on the phone with blinking red light. I don't know if my battery was over-drained though. I went to AT&T and was playing around with their charger and new battery and somehow the so-called dead battery started working again. They changed the SIM card on my phone there and then i haven't been able to use the phone since. I've changed the network to GSM instead of Auto setting under Phone Options which allows us to make calls; but now I can't connect to 3G network.

Charging thru mini usb
My phone started to exhibit similar problems...plugged in but no charging of the battery. I finally realized that my mini usb connection on the phone has been compromised (bent, distorted=not functioning properly) Now I have to prop the mini usb connection up at a slight angle to engage the charge. I think the plastic/metallic connector on the phone is somewhat fragile ...I had similar issues with my hermes.

called customer support.
they are sending me a new phone and battery.
how do i know its not a refurbished one? any clues?

before u send out your defect phone, have u check if your phone's mini-USB connector has bent or misaligned pins?

yeah all the connectors visually are fine.

Galaxy Gear won't charge or turn on

I've seen several threads about this in the past month on other websites with no solutions so it seems to be a common issue.
The problem I'm having is that after not using my gear for a few days it refuses to charge or turn on. Not even a flicker when the charger is attached. Tried two different cords. Pins are clean and lined up. Left it plugged in overnight several times. Anyone else having or had this issue? Thanks

I don't have an answer for the problem at hand but I would like to stay updated with this thread. I'm looking into getting one very soon.
53N7 FR0M M4 N073-3 V1A 7A9A7A7K

Had not heard of issue before. Did you try holding down power button for 10secs+?

Brendo said:
Had not heard of issue before. Did you try holding down power button for 10secs+?
Click to expand...
Click to collapse
Yes but since the unit is completely dead it has no effect
Here are some other threads where users are having the same issue:
http://forums.androidcentral.com/samsung-galaxy-gear-smartwatch/345647-gear-wont-power-charge.html
http://forums.androidcentral.com/sa...watch/348248-gear-watch-wont-charge-turn.html
http://forums.androidcentral.com/sa...watch/323132-galaxy-gear-will-not-charge.html

After trying a third cord for a Samsung blue tooth headset I finally got the gear to show it is charging and states 60% battery. Very strange. Tried turning it on and resetting it several times beforehand too so even though it had charge it was temporarily bricked. Hope this doesn't happen again

I had an similar experience the other day, the clock wouldn't start/charge or react to the power button. After i repeatedly tried to hold the powerbutton i finally rebooted. I suspect the gear was actually on, but that the system froze. Was about to do the surgery to remove the battery to check when it booted up
sent from my carrier pidgeon

I recently had this issue with one of my gear.this problem comes when you leave you watch on and battery drains and you don't charge for couple of weeks.I think it has something to do motherboard.only way to fix this is to replace battery which has juice in it.that's how I got mine working.I replaced the battery from my working watch and it started working and the dead battery I took out put in my other watch also started charging and working.this is a factory defect and Samsung should replace it free lifetime of watch instead of one year.

FIX
bladerealm124 said:
I've seen several threads about this in the past month on other websites with no solutions so it seems to be a common issue.
The problem I'm having is that after not using my gear for a few days it refuses to charge or turn on. Not even a flicker when the charger is attached. Tried two different cords. Pins are clean and lined up. Left it plugged in overnight several times. Anyone else having or had this issue? Thanks
Click to expand...
Click to collapse
I found that if you take the Galaxy Gear apart and disconnect the power from the motherboard then plug back in and put the gear back together has got them to turn back on almost every time just give it a charge for a few minutes. This will fix it as long as the issue was not due to rooting to trying to put a custom ROM on the Gear. There is a few videos on YouTube that can help you take it apart.
- I work for Samsung experience shop and i have run into this issue often and just about every time this has fixed it.
- sorry for late response hope your back in the business with the Gear.

I've had this issue with wall chargers and did some reading online. Someone suggested to plug it into a computer/laptop usb port.
I plugged it into the laptop and walked away and guess what? It's charging. I tried many different chargers varying in ratings but nothing worked
Try leaving it plugged into the pc for a good while. After two days of trying various chargers, my gear is back up and running

Had this issue as well. I tried a series of taps to the power button followed by a hold and it eventually turned on and has been working fine since.
tap - hold
tap tap - hold
tap tap tap - hold
eventually it will come on, i cant remember how many taps it was when it finally reset.

Hi had this issue also spent 3 hours trying to figure it out as had just got gear out of its box at very first plugging charger in a quick image appeared on screen then off after that nothing. Eventually being as carefully as possible while gear was in charging dock still plugged in i opened the lid not once did i move gear off contacts but did give sight wiggle then it came to life appears to me its a docking problem of some sort. of course I DON'T RECOMMEND opening lid while charging but thought id pass on what i figured out do at your own risk, I hope this helps others with this issue

Thanx
robfarley772 said:
I found that if you take the Galaxy Gear apart and disconnect the power from the motherboard then plug back in and put the gear back together has got them to turn back on almost every time just give it a charge for a few minutes. This will fix it as long as the issue was not due to rooting to trying to put a custom ROM on the Gear. There is a few videos on YouTube that can help you take it apart.
- I work for Samsung experience shop and i have run into this issue often and just about every time this has fixed it.
- sorry for late response hope your back in the business with the Gear.
Click to expand...
Click to collapse
I was suffering from this issue for days.. Finally made it.. Thank you buddy... Now working like charm!

Gear Watch Charging FIXED!
Thanks to this thread I am very happy!
Just bought a 2nd hand Gear Watch at auction. No idea about how they work and wondered why it wouldn't switch on or respond when charging. Just a black screen regardless of which charger or cable was connected. Read above about disconnecting the power from the motherboard so watched this youtube video on tear down ( won't let me post the full link but this is the video number... v=5WzGC0786U0 )
Luckily had a small 'star' toolset available. Pulled the watch apart... disconnected the power...reconnected the power...reassembled the watch... plugged into the charger and voila! Instantly showed up on the screen with an orange timer and then went black (held my breath) then came on with the battery symbol with 0% charge. Looking at it as I write...touched the screen and now has 10% charge (only been about 5 minutes).
Looking forward to playing with it when fully charged Thank you to the contributors to this thread. I thought I'd been ripped off...but now it seems I'm the one who has scored a working Gear Watch for £20 )))

mine started working on its own... strangely enough.
taking the advice from this thread, i looked into alternate ways to get my Galaxy Gear up and running. I tried cleaning the metal tabs that connect, tried opening the holster while it was plugged in, nothing. i didn't have a star kit to take it apart, so i left it on the charger while i could go find one. thing is, i completely forgot about it, since i've got the Gear 2 for my S5. i was cleaning around my desk and bumped into the gear which fell over and showed that it was at 100% charged capacity. beforehand, it was completely dead, despite the fact that i left it on the charger for a solid 24 hours and no response. maybe it just needed a little more time on there, who knows. but i powered it on, and it's fully functioning. the only drawback is that it needs a factory reset since it was without power for so long. i could connect it as an accessory to my S5, but i couldn't use it in the place of my Gear 2 as it's been rooted/running a _null ROM, and the Gear Manager software has been updated a few times. i'm going to factory reset it and pair it with my Note 3, and see if _null has an updated version of his ROM out there. but i figured i'd let someone know my experience in case it might help in some way.

Fixed it !
terryzzz said:
Thanks to this thread I am very happy!
Just bought a 2nd hand Gear Watch at auction. No idea about how they work and wondered why it wouldn't switch on or respond when charging. Just a black screen regardless of which charger or cable was connected. Read above about disconnecting the power from the motherboard so watched this youtube video on tear down ( won't let me post the full link but this is the video number... v=5WzGC0786U0 )
Luckily had a small 'star' toolset available. Pulled the watch apart... disconnected the power...reconnected the power...reassembled the watch... plugged into the charger and voila! Instantly showed up on the screen with an orange timer and then went black (held my breath) then came on with the battery symbol with 0% charge. Looking at it as I write...touched the screen and now has 10% charge (only been about 5 minutes).
Looking forward to playing with it when fully charged Thank you to the contributors to this thread. I thought I'd been ripped off...but now it seems I'm the one who has scored a working Gear Watch for £20 )))
Click to expand...
Click to collapse
Just to share my experience, I left my gear about 2 months discharged, today I tried to charge it and nothing. I tried everything, clean, connect, disconnect etc, so, I pulled the watch apart and disconnected the power etc and everything is working fine now, charging as usual.

Here's what worked for me
I read on another site to try a piece of paper folded and put next to the on button so when the charging cradle is snapped closed it pushes it down. I just tried it and after many days of a dead gear watch....ta da! Success. Now it's on and charging. Take the paper out once it starts to reboot otherwise it will just cycle over and over. Hope this helps someone else. It's tricky to fit just right...i folded a tiny piece of post it note ...good luck. Penelope

ph00ny said:
I've had this issue with wall chargers and did some reading online. Someone suggested to plug it into a computer/laptop usb port.
I plugged it into the laptop and walked away and guess what? It's charging. I tried many different chargers varying in ratings but nothing worked
Try leaving it plugged into the pc for a good while. After two days of trying various chargers, my gear is back up and running
Click to expand...
Click to collapse
I had the same problem: the gear is dead and not charging with a wall charger after leaving the gear for more than 1 month unused. I followed ph00ny's advice and tried to charge it via usb and it immediately started to charge. So before taking it apart I suggest try it out with usb charger.
Cheers

Stopped my gear update by shutting off my phone and now gear wont power on
I have been trying everything to get it to turn on.... (holding down the power button, tap and hold, charging with USB) nothing is working. Don't have a star driver to open it up, but may have to invest in one.
Anyone have the same issue? This is driving me crazy!

Galaxy gear charging
itisagoodname said:
Had this issue as well. I tried a series of taps to the power button followed by a hold and it eventually turned on and has been working fine since.
tap - hold
tap tap - hold
tap tap tap - hold
eventually it will come on, i cant remember how many taps it was when it finally reset.
Click to expand...
Click to collapse
Bingooooooo, It's paradoxal All you have to do when the battery is left drained for a couple of days is to start charging on a Laptop or a desktop with a s4 usb cord for about 10 mn then you continue charge if you like with à wall charger
Regards

tarhounir said:
Bingooooooo, It's paradoxal All you have to do when the battery is left drained for a couple of days is to start charging on a Laptop or a desktop with a s4 usb cord for about 10 mn then you continue charge if you like with à wall charger
Regards
Click to expand...
Click to collapse
Oddly enough this is nothing but the truth. Funny enough. I lost my charger dock thingamajig recently and not one hour ago i started making my own out of a 2x4, and a few bits laying around. Was sad to see gear wouldnt charge or boot. tried different chargers and nothing. I read everything and saw this and didnt think to try as im only running two wires to charge my gear, as those with homemade chargers know. Plugged it into a laptop and boom. charging... please someone explain to me the theory behind this. and dont say the current as i even tried 500ma and 250ma chargers to no avail. how does a pc usb magically do it without data lines connected.... so confused..

[Q] Gear won't charge.

Hi all,
My Samsung Galaxy Gear won't charge after a month of empty battery. Have tried to charge it about 22 hours now, but no success. The charging symbol is not displayed either.
A voltmeter shows that the charging cover gives power out to the gear, but it seems like the gear won't accept charging.
Using the original charger and charging cover.
Some knows what I could do about it?
EDIT: Also tried multiple chargers, and tried to plug it in the computer, also tried to reset it by holding the power button for 10+ seconds.

Tweekaz said:
Hi all,
My Samsung Galaxy Gear won't charge after a month of empty battery. Have tried to charge it about 22 hours now, but no success. The charging symbol is not displayed either.
A voltmeter shows that the charging cover gives power out to the gear, but it seems like the gear won't accept charging.
Using the original charger and charging cover.
Some knows what I could do about it?
EDIT: Also tried multiple chargers, and tried to plug it in the computer, also tried to reset it by holding the power button for 10+ seconds.
Click to expand...
Click to collapse
check if its in the charger backwards
it should charge in about 1 hour fully

forshaw said:
check if its in the charger backwards
it should charge in about 1 hour fully
Click to expand...
Click to collapse
Have checked, its the right way.

Help me
Tweekaz said:
Have checked, its the right way.
Click to expand...
Click to collapse
find the solution? I have this problem and not try to do as many things ...

problem solved, connect your Laptop and Gear to wait, wait 6 hours, others 15 minutes, so there is no specific time, I hope you serve!

Mine does that from time to time. I simply use a Q-tip to clean the contacts on the watch and the cradle, and all is good.
Sent from where the wind begins....

The actual problem is the fact that the craddle does not have direct connection to the battery, it has to go through the mainboard first. In some cases, if battery is completely empty, mainboard wont recognize the cradle and thus not charge or boot up. This happened to a friend of mine and he gave it to me to tinker with it. What finally worked was this: put the gear in its cradle (ofc cradle connected to power supply), but did NOT close the cradle cap. Instead I pressed on the gear to have connection and with a flat screwdriver i held the power button for about 10 seconds, while in the cradle and getting power. Aaaand it booted. Afterwards all charging was fine, no more problems.
The moral of the story, in my opinion, is to never let your gear discharge completely. When at less than 10%, shut it down yourself until you can charge it

Dead phone and mid frame and battery replacement

Hello everyone I need some help figuring out what wrong. 3 weeks ago my wife dropped her nexus 6 and broke the power contact on ribbon cable. I ordered one online and it worked great until the phone started turning itself off show 50% or more battery. I would charge it to 100% and at below 85% life it would shut off. I tried the battery bin file deletion but it did not work so I ordered a new battery and a midframe because the original was dented. I installed the Midframe and battery yesterday and now it does not power on or show a screen when charger is plugged in. I can put it on the wireless charger and the charger light shows charger light shows it working. I did try to reinstall the old midframe and Battery and I still have the same issue. I don't know what I did wrong. If anyone has had a issue like thing please steer in the the right direction.

johnnylachingga said:
Hello everyone I need some help figuring out what wrong. 3 weeks ago my wife dropped her nexus 6 and broke the power contact on ribbon cable. I ordered one online and it worked great until the phone started turning itself off show 50% or more battery. I would charge it to 100% and at below 85% life it would shut off. I tried the battery bin file deletion but it did not work so I ordered a new battery and a midframe because the original was dented. I installed the Midframe and battery yesterday and now it does not power on or show a screen when charger is plugged in. I can put it on the wireless charger and the charger light shows charger light shows it working. I did try to reinstall the old midframe and Battery and I still have the same issue. I don't know what I did wrong. If anyone has had a issue like thing please steer in the the right direction.
Click to expand...
Click to collapse
may be your phone connector breaked

MiroALG said:
may be your phone connector breaked
Click to expand...
Click to collapse
I bought everything new and still nothing. All ribbon cables are new and so is the battery. When I connect the phone to the charger nothing happens even tried the wireless charger the base shows it's charging it but it will not power on or show its charging.

mine too , i drop my phone few time
and now at 90% it will shutoff
i alway charge it to keep phone work

Dead sm-t311 or just self-bricked?!?!

Hi all, i have a sm-t311 that i have left turned off for at least 6 months, because i buy a new tab. I want to turn it on, but it won't.... I checked something and i can tell you:
Battery is charged. I tried with multimeter, and i get 3.7v, and also connecting a lamp to the battery, the lamp turn on.
battery vontacts seems to be ok. I removed the back cover to check if something is break, but everything seems to be ok.
I just rooted it a lot of time ago, like 2 years ago, and always worked.
I have check battery charging with a milliamps absorber tester, and nothing can charge the battery more. I tried with a powerbank, with original power supply and cable, and pc, i get 0.14 mA for 10 sec, then drop to 0. even unplugging battery and connecting charger i get the same thing, and even pressing the power button (with and without battery inserted).
I tried also unplug every single flat cable to the mainboard except the power button, microsd and display, but nothing happen....
The day i left the tab into the bedside table, was working at 100% of functionality. I don't know what happen now. The only thing i can imagine, is the battery left acid on the backside of the mainboard, and brake some contacts....
What i can do?