ROOT REQUIRED TO FLASH ZIP
It will be installed to system.
This is the Xperia keyboard.
The zip is flashable, and is working on KK.
https://www.dropbox.com/s/fe77o2fppjusiem/Xperia_Keyboard_FLASHABLE_ZIP_By-Lordomn.zip
Just download it to sdcard.
Install thru Twrp/cwm recovery.
No need to wipe just enter recovery and flash.
More screenshots...
FCs on 442 moto x unrooted. I extracted the app & installed.
I have it working on stock 4.4 haven't tested on Pac or Gummy yet.
You have to flash it. It has to be installed thru recovery because of the other files.
Related
Since I've been constantly making changes to the system and currently SS does not support our android version fully. I needed a way to save or restore changes I've made.Currently there is no way to mount system with the stock KK kernel in recovery.But there is with the pawned JB kernel and that's all you need to backup system/data.So here we go!!!
((After Kit-Kat Up-Grade has fully booted!!))
1.Reboot to download mode
2.Flash pawned kernel found here---->>> http://forum.xda-developers.com/showthread.php?t=2722073
3.Select recovery at safestrap boot splash after phone reboots.
4.Mount system/data,make your backup
5.Reboot download mode Odin flash stock KitKat boot tar found also in link above.
6.Profit from your efforts
<<----This same method can be used to install flashable zips---->>
<<----Process is the same when selecting backup to restore---->>
works perfect
thanks
This thread is no longer needed. Thanks to hashcode we have a working kitkat recovery.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Hi People,
I'm new here and I do have a problem over, as the title says, my Xperia Z (C6603) won't boot up anymore.
Yesterday I unlocked my bootloader, I also rooted my phone and installed Cyanogenmod 12 afterwards using TWRP, this was working perfect and stable.
Today I found out my phone wasn't rooted at all after I installed Cyanogenmod 12. So I wanted to start over again using this way (http://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873).
So what I've basically done, I installed Xperiaz_10.5.A.0.230_kernel_only.ftf over the CM12 mod, after this my phone doesn't want to boot anymore, getting stuck at the the 'Sony' logo.
Tried to do TWRP -> Factory reset, but it didn't work.
Should I install a full .zip stock rom again instead of the FTF file to restore my old rom?
Kind regards,
xChillz
My root guide and the files provided there are for rooting the 2 stock roms in the thread title only.
You cannot flash a stock kernel onto a custom rom. This is why your device isn't booting.
You can get your device booting in a couple of ways:
1. Extract the boot.img from the Cyanogenmod rom zip and flash it using fastboot. This should allow you to boot into your CM12 rom again.
2. Flash a stock FTF. This will bring your phone back to complete stock. How to package and flash stock roms in FTF format
Sent from my C6603
kingvortex said:
My root guide and the files provided there are for rooting the 2 stock roms in the thread title only.
You cannot flash a stock kernel onto a custom rom. This is why your device isn't booting.
You can get your device booting in a couple of ways:
1. Extract the boot.img from the Cyanogenmod rom zip and flash it using fastboot. This should allow you to boot into your CM12 rom again.
2. Flash a stock FTF. This will bring your phone back to complete stock. How to package and flash stock roms in FTF format
Sent from my C6603
Click to expand...
Click to collapse
Thanks for the quick reply!
Could you tell me where I can get a 10.5.A.0.230 stock FTF or can I just Google it?
xChillz.
Thanks bro,
Installed the 10.5.A.0.230 stock FTF, then I installed CM12 and it works!
xChillz
I have xperia z1 c6902 with orignial firmware 14.4.A.0.157
after installing the IHacker v6.2 on my device following these instruction
http://forum.xda-developers.com/showthread.php?t=2716182
Install Oficial FTF for Firmware 14.1.G.1.534.
Root Your Phone Using VRoot or KingoApp Root or Whatever You Like.
Backup TA Partition.
Copy the ROM to External SDCard.
Flash the Latest [NUT]'s XZ1Dual Recovery for Xperia Z1 via PC.
Reboot into Recovery (If you already have a working Recovery, Skip the above steps).
Make Sure to do a Wipe Data/Factory Reset before Installing the ROM.
Start the Installation. (Install Zip >> Choose Zip for External SDCard).
Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
Skip to the Last Step if you are already on Firmware - 14.4.A.0.133/108.
Install Kernel.ftf for C6903 (.133) or Kernel.ftf for C6902 (.108) with Flashtool to get compatible Kernel and Baseband.
Reboot and Enjoy.
Click to expand...
Click to collapse
after install zip , the device only show black screen lighted , and give a sound when touch the screen
Sounds like the wrong kernel. I have flashed the kernel from the firmware.ftf
i have flashed .108.ftf kernel
Flash stock rom with. 157 then flash the rom...iHackers 6.2 is based om. 157 firmware...also dont forget to select stock firmware in aroma installer...
hello,
I recently flashed 5.1.1 ROM but soon realised that,it has no play store,no gapps.
OpenGapps didn't install either.
So i wanted to flash my old 4.3 ROM from flash tool.,but when i flash it phone turns on in between flashing.
How to fix it,and install 4.3 ROM.
Also if guys can give me a link to pure stock rom(no mods),in a zip file so that i can flash it via cwm,that will work too.
Thanks.
Sushrut52 said:
hello,
I recently flashed 5.1.1 ROM but soon realised that,it has no play store,no gapps.
OpenGapps didn't install either.
So i wanted to flash my old 4.3 ROM from flash tool.,but when i flash it phone turns on in between flashing.
How to fix it,and install 4.3 ROM.
Also if guys can give me a link to pure stock rom(no mods),in a zip file so that i can flash it via cwm,that will work too.
Thanks.
Click to expand...
Click to collapse
Since you have access to recovery, just flash the zip from here to get the pure unmodified stock ROM.
and if you still wanna flash a 5.1 ROM,
Flash this via fastboot mode on Flashtool,
You'll get access to TWRP,
From there, flash the ROM,
then Tangerine (if you don't want Tangerine, then flash zip from here to get only TWRP recovery)
then GApps.
One more thing..after i install any 4.3 rom,i get stuck in bootloop,but 5.1 installs perfectly and runs.
Why 4.3 is not installing.
Sushrut52 said:
One more thing..after i install any 4.3 rom,i get stuck in bootloop,but 5.1 installs perfectly and runs.
Why 4.3 is not installing.
Click to expand...
Click to collapse
I think its because of the recovery. Recovery for JB and Lollipop are quite different. So you have to flash stock ftf before trying any 4.3 ROM.
But bootloader is unlocked,and have flashed doomkernal v3.
What should i do?
Hi everyone,
I'm interested on installing the ROM developed by MXNICE :
http://forum.xda-developers.com/xperia-z1/development/rom-z5mx-rom7-5-0extended-battery-t3224245
What I understand is that I'm gonna need a pre-rooted LP version of android, and I have lots of doubts....!
I have been working on rooting and doing some mods on my xperia z1 but only on KK...so I'm not experienced on LP
What I did in KK is: install version .108 with flashtool, rooted, installed CWM recovery, DEODEXed, Camera Mod, and other minor mods... and that is is what I'm using right now. I did not touch the bootloader so I understand I have locked bootloader.
Now, this custom ROM looks awesome but installation procedure is not clear for me. I have read all the entire thread (64 pages!), and I understand that I have to install this ROM through the recovery and doing a "clean Install"
Post #341 (by arvinaquio) on that thread is:
By the way, I did a very clean installation of this ROM by reinstalling .108. Rooted it and installed Dual Recoveries. Then created a pre-rooted .368 fw through PRFCreator then full wiped and cleared cache before installing the latest fw then power off, turned on the device manually then reconfigured(Unknown Sources, USB debugging) then rebooted to Recovery then full wiped and cleared cache and installed the ROM. Rebooted it and it turned on smoothly without experiencing any error reported recently from other pages. Always do a clean installation to avoid encountering error. Good luck guys and happy modding to all of us!
Click to expand...
Click to collapse
So now, I have to create a pre rooted LP stock ROM, I found the tutorial on the internet on how to do it, but...
1) My xperia z1 model is C6943, I understand it is compatible with C6903 (i lose TV function, which I don't care)... how can I be sure I won't have a problem if I put: KK .108 stock Custom AR for C6943, pre-rooted LP.216 Custom BR (.236 not available for C6943), and then flash MxROM which is Chinese C6903 ? (Edit: is Chinese C6903 version .236)
2.a) When creating the pre rooted LP .216 should I choose the same recovery (CWM) or can I use another (I want to change to dual or TWRP)??
2.b) And also I want to change from "superuser" to "SuperSU".? Can I make those change or should I stick to CWM and superuser?
2.c) If I can't, means I should start again from KK and root installing dual recovery and superSU?
3) Once I get the pre rooted firmware, should I install it over KK firmware using recovery or using flashtool? should I wipe data, cache, and dalvik ?
Of course I already did a backup of my actual system with CWM. I just want to be sure of what I'm going to do next and avoid bootlooping or bricking my phone.
thank you all !
fedessgl said:
Hi everyone,
I'm interested on installing the ROM developed by MXNICE :
http://forum.xda-developers.com/xperia-z1/development/rom-z5mx-rom7-5-0extended-battery-t3224245
What I understand is that I'm gonna need a pre-rooted LP version of android, and I have lots of doubts....!
I have been working on rooting and doing some mods on my xperia z1 but only on KK...so I'm not experienced on LP
What I did in KK is: install version .108 with flashtool, rooted, installed CWM recovery, DEODEXed, Camera Mod, and other minor mods... and that is is what I'm using right now. I did not touch the bootloader so I understand I have locked bootloader.
Now, this custom ROM looks awesome but installation procedure is not clear for me. I have read all the entire thread (64 pages!), and I understand that I have to install this ROM through the recovery and doing a "clean Install"
Post #341 (by arvinaquio) on that thread is:
So now, I have to create a pre rooted LP stock ROM, I found the tutorial on the internet on how to do it, but...
1) My xperia z1 model is C6943, I understand it is compatible with C6903 (i lose TV function, which I don't care)... how can I be sure I won't have a problem if I put: KK .108 stock Custom AR for C6943, pre-rooted LP.216 Custom BR (.236 not available for C6943), and then flash MxROM which is Chinese C6903 ? (Edit: is Chinese C6903 version .236)
2.a) When creating the pre rooted LP .216 should I choose the same recovery (CWM) or can I use another (I want to change to dual or TWRP)??
2.b) And also I want to change from "superuser" to "SuperSU".? Can I make those change or should I stick to CWM and superuser?
2.c) If I can't, means I should start again from KK and root installing dual recovery and superSU?
3) Once I get the pre rooted firmware, should I install it over KK firmware using recovery or using flashtool? should I wipe data, cache, and dalvik ?
Of course I already did a backup of my actual system with CWM. I just want to be sure of what I'm going to do next and avoid bootlooping or bricking my phone.
thank you all !
Click to expand...
Click to collapse
3) the pre rooted firmware you get from prf creator is a zip file. This file is only flashable with the help of a custom recovery.
Don't mix up ftf files and zip files. Ftf => flashtool to get it on phone, zip => custom recovery to get it on phone.
So what I did Was: flash to stock Sony v. 108 firmware for C6943, rooted with easy root tools, download superSU from playstore and installed the dual recovery using install.bat file.
Then rebooted to recovery and made a backup.
When I flashed to lollipop using the pre rooted file I made, the phone went into bootloop. So I restored the backup and installed a pre rooted version that I downloaded from this forum, it was Central Europe for C6903. (in both cases I previously wiped data and cache).
Once I got lollipop working, checked it was rooted and with the dual recovery installed, I enabled USB debuggibg and allow install from external sources. Then entered recovery and made again a backup.
I previously checked that superSU and dual recovery included in the flasheable lollipop zip were the same version I used when I installed them on the stock kitkat rom, dont know if that was necessary, but just in case.
After that I entered recovery again, wiped data and cache and installed the custom rom.
It worked like a charm, and runs very smooth
Enviado desde mi C6903 mediante Tapatalk